Two electrons are shared between each hydrogen atom and the carbon atom bonded to it, and four electrons are shared between the carbon atoms.
Its 2
Answer:
2 would be the amount to form a covalent bond
What is the mass in grams of 381 mL of ethylene glycol?
Has a density of 1.11 grams/cm^3
Answer:
The answer is 422.91 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume = 381 mL = 381 cm³
density = 1.11 g/cm³
So we have
mass = 1.11 × 381
We have the final answer as
422.91 gHope this helps you
Cu + 2AgNO3
How many atoms of oxygen are mixed in the chemical equation above
At the same temperature, which of the following gases will effuse the slowest?
A) Hydrogen
B) Helium
C) Fluorine
D) Xenon
E) Bromine
Xenons at the same temperature, will effuse the slowest
The effusion rates is said to be inversely proportional to the square root of the molecular masses of the gases.
Hydrogen, helium, fluorine, and bromine effuses out of container earlier than Xenon because they have lower mass when compared to Xenon.At a set temperature, the average kinetic energy of all gaseous molecules is always equal.
Hydrogen gas has the lowest mass out of these gases, it will have the highest average velocity and as such, that it will exit out of the tiny hole at a rate faster than the other gases.
As the mass increases, the rate of effusion decreases. The gas with the lowest molecular weight will effuse the fastest.Conclusively, The rate of effusion for a gas is inversely proportional to the square-root of its molecular mass, this is Graham's Law.
Learn more
https://brainly.com/question/7694106
Answer: Bromine
Explanation: The rate of effusion is inversely proportional to the molar mass. Bromine (Br2) has a the highest molar mass of this group, and will therefore be the slowest
How do you know what’s inside of an atom
Answer:
microscope
Explanation:
Polllination refers to the ___________
Explanation:
from internet
the act of transferring pollen grains from the male anther of a flower to the female stigma
Answer:
transfer of pollen from anther to stigma.
Explanation:
mark me main brainliest
For the chemical reaction
2 NaOH + H2SO4 — Na2SO4 + 2H2O
how many moles of sodium sulfate will be produced from 28.3 g of sodium hydroxide?
The number of mole of sodium sulphate, Na₂SO₄ that will be produced from 28.3 g of sodium hydroxide, NaOH is 0.35 mole
How to determine the mole of NaOH Mass of NaOH = 28.3 gMolar mass of NaOH = 40 g/mol Mole of NaOH =?Mole = mass / molar mass
Mole of NaOH = 28.3 / 40
Mole of NaOH = 0.7075 mole
How to determine the mole of Na₂SO₄ produced2NaOH + H₂SO₄ —> Na₂SO₄ + H₂O
From the balanced equation above,
2 moles of NaOH reacted to produce 1 mole of Na₂SO₄.
Therefore,
0.7075 mole of NaOH will react to produce = (0.7075 × 1) / 2 = 0.35 mole of Na₂SO₄
Thus, 0.35 mole of Na₂SO₄ was obtained from the reaction
Learn more about stoichiometry:
https://brainly.com/question/14735801
What is the rate law for the following mechanism? Step 1: A + B = C (fast) Step 2: B + C=D (slow) Rate = k*
Answer:
The rate law is
rate
=k[A][B]^2
wha is the specific heat of aluminum at 72.9 °C
what is the purpose of shaking the petroleum ether-ethanol extract of the leaves with water in a separatort funnel
The purpose of shaking the petroleum ether-ethanol extract of the leaves with water in a separator funnel is that the shaking process will increase the surface area which is in contact between the two liquids and will allow the equilibrium to be established more rapidly.
This shaking process of petroleum ether-ethanol extract of the leaves with water in a separator funnel form layers of separation.
Shaking the separatory funnel allows the two solvents to mix and provides the opportunity for components dissolved in one of the solvents to be transferred to the other solvent.
Ether extraction is mainly used in the determination of Uranyl nitrate which is also known as Uranium.
To know more about ether extraction here
https://brainly.com/question/12498712
#SPJ2
Calculate the molarity of solution of "sodium sulfate" that contains 5.2 grams sodiums sulfate diluted to 500mL
Taking into account the definition of molarity, the molarity of solution of sodium sulfate is 0.0732 [tex]\frac{moles}{liter}[/tex].
Definition of molarityMolar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Molarity of solution of sodium sulfate.In this case, you have:
number of moles of sodium sulfate= [tex]5.2 grams\frac{1 mole}{142 grams} = 0.0366 moles[/tex] (being 142 g/mole the molar mass of sodiums sulfate)volume= 500 mL= 0.5 L (being 1000 mL= 1 L)Replacing in the definition of molarity:
[tex]Molarity=\frac{0.0366 moles}{0.5 L}[/tex]
Solving:
Molarity= 0.0732 [tex]\frac{moles}{liter}[/tex]
Finally, the molarity of solution of sodium sulfate is 0.0732 [tex]\frac{moles}{liter}[/tex].
Learn more about molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
How many grams are in 2.3 moles of Aluminum
Answer:
62.1 gram
Explanation:
Al molar mass = 27 g/mol
mass = molar mass × no of moles
= 27 × 2.3 = 62.1 gram
Volume is
A. The amount of space an object takes up
B. the amount of matter in an object
C. a measure of the pull of gravity on an object
D. a special state of matter
Answer:
the amount of matter in an object
Explain the structural relationship between amino acids and proteins
Answer:
A protein is just a long chain of amino acids. So, one could say that the monomer of a protein is an amino acid. Here is a diagram of a protein and amino acid for reference:
A 2.74-g sample of a substance suspected of being pure gold is warmed to 72.1 oC and submerged into 15.2 g of water initially at 24.7 oC. The final temperature of the mixture is 26.3 oC. What is the heat capacity of the substance? Could the substance be pure gold?
(The specific heat capacity of water is 4.184 J/g oC)
J/g oC (Round to three significant digits)
Look up the specific heat capacity of gold.
Could the unknown substance be pure gold? Write yes or no in the following box:
1. The specific heat capacity of the sample of gold obtained is 0.81 J/gºC
2. The substance is not pure gold
1. How to determine the specific heat capacity of gold From the question given above, the following data were obtained:Mass of gold (M₉) = 2.74 gTemperature of gold (T₉) = 72.1 °CMass of water (Mᵥᵥ) = 15.2 g Temperature of water (Tᵥᵥ) = 24.7 °C Equilibrium temperature (Tₑ) = 26.3 °C Specific heat capacity of the water (Cᵥᵥ) = 4.184 J/gºC Specific heat capacity of gold (C₉) =?The specific heat capacity of the sample of gold can be obtained as follow:
Heat loss = Heat gain
M₉C₉(M₉ –Tₑ) = MᵥᵥC(Tₑ – Tᵥᵥ)
2.74 × C₉(72.1 – 26.3) = 15.2 × 4.184 (26.3 – 24.7)
C₉ × 125.492 = 101.75488
Divide both side by 125.492
C₉ = 101.75488 / 125.492
C₉ = 0.81 J/gºC
2. How to determine if the substance is pure Specific heat capacity of gold calculated = 0.81 J/gºC Specific heat capacity of pure gold = 0.13 J/gºCFrom the above we can conclude that the substance is not pure gold since the calculated and standard value of the specific heat capacity of the gold sample is not the same
Learn more about heat transfer:
https://brainly.com/question/6363778
What is the density at 27 °C of 28.0 milliliters of a liquid that has a mass of 4.05 grams?
Answer:
The answer is 0.14 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 4.05 g
volume = 28 mL
We have
[tex]density = \frac{4.05}{28} \\ = 0.1446428571...[/tex]
We have the final answer as
0.14 g/mLHope this helps you
How many moles of Co would be required to react with 6.14m of P4
The number of moles of Co that would be required to react with 6.14 moles of P4 would be 36.84 moles
Stoichiometric calculationsFrom the equation of the reaction:
6Co + P4 → 2Co3P2
For every 1 mole of P4, 6 moles of Co is required for complete reaction.
Thus, the mole of Co that would be needed for 6.14 moles of P4 would be:
6 x 6.14 = 36.84 moles
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886
At 600. K how many moles of gas are in a 1.00 L cylinder at atmospheric pressure?
Answer:
0.02moles
Explanation:
To answer this question, the general gas law equation is used. The General gas law is:
Pv = nRT
Where; P = standard atmospheric pressure (1 atm)
V = volume (L)
n = number of moles
R = Gas law constant
T = Temperature
For this question; volume = 1.00L, atmospheric pressure (P) = 1 atm, R = 0.0821 L-atm / mol K, T = 600K, n = ?
Therefore; Pv = nRT
n = PV/RT
n = 1 × 1/ 0.0821 × 600
n = 1/49.26
n = 0.0203moles
Hence, there are 0.02 moles of gas.
The number of mole of the gas present in the cylinder is 0.02 mole
From the question given above, the following data were:
Temperature (T) = 600 K
Volume (V) = 1 L
Pressure (P) = 1 atm
Number of mole (n) =?The number of mole of the gas present in the cylinder can be obtained by using the ideal gas equation (PV = nRT) as illustrated below:
Temperature (T) = 600 K
Volume (V) = 1 L
Pressure (P) = 1 atm
Gas constant (R) = 0.0821 atm.L/Kmol
Number of mole (n) =? PV = nRT1 × 1 = n × 0.0821 × 600
1 = n × 49.26
Divide both side by 49.26
[tex]n = \frac{1}{49.26}\\\\[/tex]
n = 0.02 moleThus, 0.02 mole of the gas is present in the cylinder.
Learn more: https://brainly.com/question/12393538
A 0.205 g sample of CaCO3 (Mr = 100.1 g/mol) is added to a flask along with 7.50 mL of 2.00 M HCl. CaCO3(aq) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g) Enough water is then added to make a 125.0 mL solution. A 10.00 mL aliquot of this solution is taken and titrated with 0.058 M NaOH. NaOH(aq) + HCl(aq) → H2O(l) + NaCl(aq) How many mL of NaOH are used?
The required volume of sodium hydroxide is 15 mL.
What is concentration?The term concentration refers to the amount of substance present. It is the quotient of the number of moles and volume of solution.
We have the reaction; 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)
Number of moles of CaCO3 = 0.205 g / 100.1 g/mol = 0.0020 moles
Number of moles of HCl = 2.00 M * 7.50/1000 = 0.015 moles
Since 2 moles of HCl reacts with 1 mole of CaCO3
x moles of HCl reacts with 0.0020 moles
x = 0.004 moles of HCl
This means that HCl is in excess by the amount 0.011 moles.
Now consider the reaction; NaOH(aq) + HCl(aq) → H2O(l) + NaCl(aq)
Concentration of HCl = 0.011 moles/0.125L = 0.088 M
From;
CAVA/CBVB = na/nb
CAVAnb = CBVBna
VB = CAVAnb/CBna
VB = 0.088 M * 10mL * 1/0.058 M * 1
VB = 15 mL
Learn more about concentration: https://brainly.com/question/3045247
What was the major organic product obtained when propanal was heated with a catalytic amount of KOH in water
Answer:
Commercially, 2-methylpentenal is synthesized by the aldol condensation of propanal in the presence of liquid base like KOH or NaOH in stoichiometric amount,,. Under optimum reaction conditions, 99% conversion of propanal is achieved with 86% selectivity of 2-methylpentenal using liquid base.
Explanation:
hope this helps
Answer:
HMM, what the person above said.
lead 2 nitrate and potassium iodide net ionic equation
Answer:
Pb2+(aq) + l+(aq) ------------pbl2(s) net ionic equation
Explanation:
Pb(NO3)2(aq) + kI(aq)------------PbI2(s) + kNo3(aq)
Pb2+ (aq)No3-(aq) + k+(aq) l-(aq) ______PbI2(s) + k+(aq) + NO32+(aq)
Pb2+(aq) + I-(aq). ------------Pbl2(s)
If the molecular weight of horseradish peroxidase is about 44,000 g/mol, how many moles of enzyme are used per mole of vanillin?
What is when the molecular weight of horseradish peroxidase is about 44,000 g/mol, The number of moles of the enzyme used per mole of vanillin is
ME=289.188moles
What is the number of moles of the enzyme used per mole of vanillin?Generally, the equation for the moles of the enzyme is mathematically given as
[tex]ME=\frac{molecular weight}{vanilin MW}[/tex]
Therefore
ME=44000/152.15
ME=289.188moles
In conclusion, the number of moles of the enzyme is
ME=289.188moles
Read more about Molarity
https://brainly.com/question/9149034
What is chemical energy
What happens to the electricity in a strand of Christmas lights if they are plugged in and not working? What happens if they are plugged in but the wires get cut
when a circuit is open the electricity fails to pass through any of the wire causing all the lights to go out. If the lights are in a straight line each light is on its own circuit to the power source.
A rock has been placed in water. The mass of the rock is 20 g. What is the rock's density?
g/mL
Answer:
0.67 g mL-1
Explanation:
Every time a problem asks you to find the density of a substance, your goal will essentially be to determine the mass of one unit of volume of said substance.
Explain what happens to the imidazole side chain of histidine in a buffer of pH 4.0 and at pH 10.2.
Histidine, an essential amino acid, has as a positively charged imidazole functional group. The imidazole makes it a common participant in enzyme catalyzed reactions. The unprotonated imidazole is nucleophilic and can serve as a general base, while the protonated form can serve as a general acid.
SOMEONE PLEASE HELP I WILL Mark u BRAINLIST
Answer:
answer 7.4 atm
Explanation:
i did this and got it correct
Number of electrons for all of these even the ones with a number by them ? Will give brain-list!!!!
Explanation:
s=2
p=6
d=10
f=14
I hope this was helpful
Pure gold has a density of 19.32g/cm^3. You find a gold ring with a mass of 6g and a volume of 0.31cm^3.is this ring pure gold?
Answer:
Yes, this ring is pure gold because when we divide the mass by the volume we get our density for the ring, which comes out to about 19.32.
Explanation:
Which substance has a molar mass of 33.99 g/mol?
Answer:
PH₃.
Explanation:
Hello.
In this case, among the options:
PH₃, GaF₃, SF₂ and CO₂
We compute their molar masses by adding the atomic masses of the constituting elements by their subscripts:
[tex]M_{PH_3}=m_P+3*m_H=30.97+3*1.01=34.00g/mol\\\\M_{GaF_3}=m_{Ga}+3*m_F=69.72+3*19.00=126.72g/mol\\\\M_{SF_2}=m_{S}+2*m_F=32.07+2*19.00=70.07g/mol\\\\M_{CO_2}=m_{C}+2*m_O=12.01+2*16.00=44.01g/mol[/tex]
Thus, the answer is PH₃.
Best regards.
Number of electrons for all of these even the ones with a number by them ? Will give brainlist!!!!
Explanation:
s=2
p=6
d=10
f=14
pls mark me brainlist