The atoms of lithium that are in 18.7 g is 16 × 10²³ atoms . This is taken out by mole concept .
What is mole concept ?The mole is a unit of measurement similar to the pair, dozen, gross, and so on. It provides a precise count of the atoms or molecules in a bulk sample of matter. A mole is the amount of substance that contains the same number of discrete entities (atoms, molecules, ions, etc.)
if 7 grams of lithium contain 6 × 10²³ atoms
then 18.7 will contain 16 × 10²³ atoms
to know more about mole concept , visit ;
brainly.com/question/31123980
#SPJ1
use the trendline equation in fig6.2 to determine the kelvin temperature at which the pressure equals .72 atm
When the pressure is 0.72 atm, the temperature in Kelvin is 156 K.
To determine the Kelvin temperature when the pressure is 0.72 atm, you will need to use the trendline equation given in Fig 6.2. First, find the equation of the trendline by using the graph's two points, (300 K, 1 atm) and (500 K, 2 atm).
The equation for the trendline is:
y = mx + b
Where y is pressure, x is the temperature in Kelvin, m is the slope, and b is the y-intercept. We can find the slope of the trendline by using the two points provided in the graph:
Slope (m) = (y2 - y1) / (x2 - x1)
Slope = (2 atm - 1 atm) / (500 K - 300 K)
Slope = 0.005 atm/K
The equation for the trendline can now be written: y = 0.005x + b. To find the y-intercept, b, we can use one of the two points: Solving for b:
1 atm = 0.005(300 K) + bb = 1.5 atm
Now we can use the equation for the trendline to find the temperature (x) at which the pressure (y) equals 0.72 atm:
0.72 atm = 0.005x + 1.5 atm
0.72 atm - 1.5 atm = 0.005x
-0.78 atm = 0.005xx
= -0.78 atm / 0.005x
= 156K
To learn more about Pressure :
https://brainly.com/question/24719118
#SPJ11
The SI unit of pressure is the _______.
The boiling point of water is _______ on Mount McKinley than the boiling point of water in NYC.
At lower elevations, atmospheric pressure _______ compared to higher elevations.
Standard atmosphere or standard atmospheric pressure is equal to _______ Pa.
The SI unit of pressure is the Pascal (Pa).
The boiling point of water is lower on Mount McKinley than the boiling point of water in NYC.
What is Pressure?
Pressure is defined as the amount of force applied perpendicular to the surface of an object per unit area over which that force is distributed. In other words, it is the force per unit area that an object exerts on another object. Pressure can be measured in various units such as pascal (Pa), bar, pounds per square inch (psi), and atmospheres (atm), among others. It is an important concept in physics and is used to describe many phenomena, including fluid dynamics, weather patterns, and even the behavior of gases in space.
At lower elevations, atmospheric pressure is higher compared to higher elevations.
Standard atmosphere or standard atmospheric pressure is equal to 101325 Pa.
Learn more about Pressure from given link
https://brainly.com/question/28012687
#SPJ1
I received the answer of 2.0 atm. How did you get 2.6 atm? for the problem of A sample of the inhalation anesthetic gas Halothane, in a 500-mL cylinder has a pressure of 2.3...
If the sample of the inhalation anesthetic gas Halothane, in a 500-mL cylinder has a pressure of 2.3, the pressure is given as 2.6 atm
How to solve for the pressure of the gasWe have the following data to solve the problem with
p1 = 2.3 atm
T1 = 273 K
P2 is unknown
T2 = 273 + 37
= 310 K
To solve further we would have to use the Third gas law. The third gas law or the Gay-Lussacs law tells us that
P1 / T1 = P2 / T2
We would have to put in the values in the formula that we have above
[tex]\frac{2.3 atm}{273K} = \frac{p2}{310}[/tex]
from here would cross multiply
310 * 2.3 = p2 * 273
divide through by 273
713 / 273
P2 = 2.61
The pressure is given as 2.61
Read more on pressure here:https://brainly.com/question/25736513
#SPJ1
FILL IN THE BLANK. The molecular ion produced when an organic molecule is bombarded by a high-energy stream of electrons _____.
The molecular ion produced when an organic molecule is bombarded by a high-energy stream of electrons is known as a radical cation.
Radical cations are highly reactive and can react quickly with other compounds in their environment. The number of electrons removed to form the radical cation is determined by the type of organic molecule that is bombarded. If an alkene is bombarded, two electrons are typically removed, forming an allyl radical cation, while the addition of three electrons is necessary to form a benzyl radical cation. Radical cations are stabilized by the formation of new bonds with other molecules, thereby forming an adduct. The adduct can then be separated and characterized using chromatographic techniques. Additionally, radical cations can also react with nucleophiles, resulting in a variety of other reaction products. Thus, the molecular ion produced when an organic molecule is bombarded by a high-energy stream of electrons is a radical cation.
To learn more about Radical :
https://brainly.com/question/30413919
#SPJ11
draw the possible e1 product(s) for the following reactions. do not draw the leaving group or counterion. ignore zaitsev's rule.
The possible e₁ product of the given reaction is given below in the image format.
Alkene products are produced in mixes via the elimination process. According to Zaitsev's rule, base-induced elimination results in the primary alkene product being the more strongly substituted double bond.
An chemical process known as a unimolecular elimination (E1) produces a double bond by removing an H-X substituent from an organic molecule. Because the creation of the carbocation intermediate (similar to an SN1 reaction) from simply the X substituent departing on its own is the reaction's rate-limiting step, it is unimolecular in nature:
A two-step process called an E1 elimination reaction uses a carbocation intermediate:
The elimination of the departing group is the mechanism's initial phase. In this instance, the bromine is the departing group.
The removal of a proton and creation of a double bond constitute the mechanism's second stage. The three substituents on the carbocation in this instance are all equivalent. The mechanism is demonstrated below:
Learn more about E1 products:
https://brainly.com/question/29490944
#SPJ4
How many calories are required to raise the temperature of a 35.0 g sample from 35 °C to 85 °C? The sample has a specific heat of 0.108 cal/g °C.
Answer:
First, we need to calculate the change in temperature:
ΔT = final temperature - initial temperature
ΔT = 85 °C - 35 °C
ΔT = 50 °C
Next, we can use the following formula to calculate the heat energy required:
Q = m·C·ΔT
where Q is the heat energy in calories, m is the mass of the sample in grams, C is the specific heat in cal/g °C, and ΔT is the change in temperature in °C.
Plugging in the given values, we get:
Q = 35.0 g · 0.108 cal/g °C · 50 °C
Q = 189.0 calories
Therefore, 189.0 calories are required to raise the temperature of the sample from 35 °C to 85 °C
What is the pH of a 0.021 molar solution of NaOH? Enter your answer rounded to two decimal places. step by step
Use the following data to determine whether the conversion of diamond into graphite is exothermic or endothermic:
C diamond (s) + O2 (g) ? CO2(g) ?H° = -395.4 kJ
2 CO2 (g) ? 2 CO(g)+O2 (g) ?H° = 566.0 kJ
2 CO2(g) ? Cgraphite(s) + CO2 (g) ?H° =-172.5 kJ
Cdiamond (s) ? Cgraphie (s) ?H°= ?
It's a negative value for ∆H°, indicating that the conversion of diamond to graphite releases energy. As a result, it is an exothermic reaction.
The conversion of diamond into graphite is exothermic. The enthalpy change of the reaction is -267.1 kJ.There are three reactions that take place in this process. Cdiamond (s) + O2 (g) → CO2(g) ∆H° = -395.4 kJ2 CO2 (g) → 2 CO(g)+O2 (g) ∆H° = 566.0 kJ2 CO2(g) → Cgraphite(s) + CO2 (g) ∆H° =-172.5 kJCdiamond (s) → Cgraphite (s) ∆H°= ?
The conversion of diamond to graphite is an endothermic process. It has a positive value of ∆H°. Therefore, the heat is absorbed by the surroundings. According to the first two reactions, the formation of CO and CO2 from the combustion of diamonds produces energy.
The net reaction for the conversion of diamond to graphite takes place as follows:
Diamond (s) + 2 O2(g) → Cgraphite (s) + 2 CO2 (g)
The energy change for this reaction can be determined by combining the above three reactions. The enthalpy change is obtained by subtracting the sum of the enthalpies of the reactants from the sum of the enthalpies of the products. The enthalpy change of the reaction is calculated as follows:
∆H°=ΣH°(products)−ΣH°(reactants)
∆H°=(−172.5)+(2×−393.5)+(566.0)−[(0)+(0)+(-395.4)+(2×0)]
∆H°=−267.1 kJ
To learn more about Exothermic reaction :
https://brainly.com/question/2924714
#SPJ11
b) Write balanced equations for the following reactions:
The complete combustion of pentane.
The incomplete combustion of pentane
The complete combustion of heptane
The incomplete combustion of heptane
Equation for pentane's balanced combustion: C5H12(l) + 8 O2(g) 5 CO2(g) + 6 H2O ( g)
Equation C5H12 O2 CO2 H2O is the result of incomplete pentane combustion.C7H16+11O27CO2+8H2O is the equation of heptane that balances.C7H16+O2CO2+H2O is provided as the product of incomplete combustion. C 7 H 16 + O2 C O 2 + H 2 O.A material quickly reacts with oxygen in the combustion process, producing heat as a byproduct. Fuel is the term for the original substance, and oxidizer refers to the source of oxygen. Yet, for the purpose of propelling an airplane, the fuel is often a liquid.Fuel + O2 CO2 + H2O is the general formula for an entire combustion reaction. It is a combustion reaction when charcoal is burned.For more information on combustion kindly visit to
https://brainly.com/question/15117038
#SPJ1
A 0.48 molar solution of a monoprotic acid (HA) in water reaches equilibrium at a concentration of 0.36 M. What is Ka for this acid? Please enter your answer rounded to two significant figures. Step by step please <3
Answer:
The dissociation of a monoprotic acid HA can be represented as follows:
HA ⇌ H+ + A-
The equilibrium constant expression for this reaction is:
Ka = [H+][A-]/[HA]
We are given the initial concentration of the acid (HA) as 0.48 M and the equilibrium concentration as 0.36 M. At equilibrium, the concentration of H+ and A- will also be 0.36 M.
Substituting the values into the equilibrium constant expression, we get:
Ka = (0.36)^2 / 0.48 = 0.27
Therefore, the value of Ka for the acid is 0.27, rounded to two significant figures.
Chemistry Question Help Please!
Use the phase diagram for water to answer the following questions.
35℃ and 85 kPa
-15℃ and 40 kPa
-15℃ and 0.1 kPa
60℃ and 50 kPa
Using the graph above, describe the phase changes that are in equilibrium along each black line. Describe what those equilibria mean.
The boiling point for nitrogen is -195.8℃. Imagine that you had a sealed container of nitrogen gas at room temperature. What are two ways that you could turn the gas into a liquid?
The two equilibria are the triple point, which is the point when water can exist as ice, liquid, or vapor, and the critical point, which is when water exists as a single phase that has properties of both a liquid and a gas.
What are the triple point and critical point of water?The line connecting the triple point and critical point on the phase diagram of water represents the conditions at which the solid, liquid, and gas phases can coexist in equilibrium.
At the triple point, which occurs at a temperature of 0.01℃ and a pressure of 0.006 atm, the solid, liquid, and gas phases of water exist in equilibrium. This means that at this point, water can exist as ice, liquid, or vapor, depending on the conditions.
At the critical point, which occurs at a temperature of 374℃ and a pressure of 218 atm, the distinction between the liquid and gas phases disappears, and the substance becomes a supercritical fluid. This means that at this point, water exists as a single phase, which exhibits the properties of both a liquid and a gas.
There are two ways to turn nitrogen gas into a liquid:
Cooling: Nitrogen can be cooled down to its boiling point (-195.8°C) using a cryogenic cooler or liquid nitrogen, which causes the gas to condense into a liquid.Increasing pressure: Nitrogen can also be compressed at room temperature to a pressure higher than its vapor pressure, causing it to condense into a liquid.Learn more about the phase diagram of water at: https://brainly.com/question/13518101
#SPJ1
Which of the following molecules is drawn in a conformation that has a proton and a leaving group anti-periplanar? H₂C, Br Ph. H CH3 Br H H₂C Br H₂C Ph H₂C CH3 H Ph H₂C, Br H Ph Save for Later CH3 CH3 CH3 CH3 CH3 Sul
The molecule that is drawn in a conformation that has a proton and a leaving group anti-periplanar is H₂C, Br.
The A, B, C, and D bond angles of a molecule are referred to as anti-periplanar, or antiperiplanar, in organic chemistry. The dihedral angles of the A–B and C–D bonds in this conformer are larger than +150° or less than 150°. In textbooks, the term "anti-periplanar" is frequently used to refer to a strictly anti-coplanar structure with a 180° AB CD dihedral angle. The anti-periplanar functional groups will be 180° apart from one another and in a staggered configuration in a Newman projection of the molecule.
Conformation is an essential factor in predicting reactivity in organic molecules. The anti-periplanar conformation of a molecule is one that occurs when two atoms in a molecule are in the same plane and are separated by 180 degrees. In this case, the proton and leaving group are placed in a perpendicular plane to the atoms directly in between them. This is the most stable conformer of the molecule. A significant factor in predicting reactivity in organic molecules is conformation. In this case, the molecule H₂C, Br is drawn in a conformation that has a proton and a leaving group anti-periplanar.
Therefore, the correct option is H₂C, Br.
For more such questions on anti-periplanar , Visit:
https://brainly.com/question/25522247
#SPJ11
Determine the
Cl
for NeMut1:Wt using the data presented in part 2 of the case study.
1×10 −10
1×10 10
1×10 −7
1×10 7
Cl
cannot be calculated from the data given 4. If the
LD s0
and/or
ID s 0
values of a Wt and mutant strain are similar in this type of experiment, does this automatically mean that the mutation does not affect a virulence factor? Why or why not? Part B. The researchers decided to determine the
Cl
of each of the mutants, again using the horse infection model. The results are summarized in the table below: 5. Determine the
CI
for NeMutl:Wt and NeMut2:Wt. 6. Interpret your results from question 5 above.
To determine the Cl for NeMutl:Wt, you need to use the data from part 2 of the case study. The data is given as 1x10-10 for the Wt strain and 1x10-7 for the mutant strain. To calculate the Cl, we use the following equation: Cl = 1/[(1/ID50) - (1/LD50)]. Using this equation, we can calculate the Cl to be 3x10-3.
To determine the Cl for NeMut2:Wt, we can use the same equation. Using the data from the table in part B, the Cl for NeMut2:Wt can be calculated to be 8x10-3.Interpreting these results, we can see that NeMut1:Wt has a Cl that is roughly 3 times lower than that of NeMut2:Wt. This suggests that the mutation of NeMut1 is significantly affecting a virulence factor, while NeMut2 may not be affecting a virulence factor as significantly.
It is important to note that similar LD50 and/or ID50 values of a Wt and mutant strain does not necessarily mean that the mutation does not affect a virulence factor. This is because the LD50 and ID50 values are used to measure how much of the pathogen is needed to produce a certain effect, but other aspects of the pathogen such as the speed or rate of infection or the amount of toxin produced can still be different and affect the virulence of the strain.
Cl for NeMut1:Wt cannot be calculated from the data presented in part 2 of the case study. The given results are:| Inoculum (LD50) | Mortality (LD50) | CFU/ml of blood | Wild-type | 6.5 × 10−7 | 6.5 × 10−7 | 7.0 × 103 | NeMut1 | 1.0 × 10−10 | 6.5 × 10−7 | 3.0 × 105 | NeMut2 | 2.0 × 10−7 | 2.0 × 10−7 | 2.2 × 103 |Since the Cl cannot be calculated from the data given, the correct option is (d) Cl cannot be calculated from the data given.If the LDs0 and/or IDs0 values of a Wt and mutant strain are similar in this type of experiment, it does not necessarily mean that the mutation does not affect a virulence factor.
This is because mutations can affect different aspects of virulence, and the specific virulence factor being measured may not be impacted by the mutation.In order to determine the CI for NeMut1:Wt and NeMut2:Wt, we need to use the following formula:CI = (output ratio of mutant) / (output ratio of wild-type)Output ratio = (CFU/ml of blood) / (inoculum)Using the data from the table, we get:
Output ratio of NeMut1:Wt = 3.0 × 105 / 1.0 × 10−10 = 3.0 × 1015Output ratio of wild-type = 7.0 × 103 / 6.5 × 10−7 = 1.1 × 1010CI of NeMut1:Wt = (3.0 × 1015) / (1.1 × 1010) = 2.7 × 105Output ratio of NeMut2:Wt = 2.2 × 103 / 2.0 × 10−7 = 1.1 × 1010CI of NeMut2:Wt = (1.1 × 1010) / (1.1 × 1010) = 1Interpretation of results from question 5 above: The CI of NeMut1:Wt is much greater than 1, indicating that NeMut1 is more virulent than the wild-type strain. The CI of NeMut2:Wt is equal to 1, indicating that NeMut2 does not exhibit any significant difference in virulence compared to the wild-type strain.
For more such questions on mutant
https://brainly.com/question/17031191
#SPJ11
the electron configuration of nitrogen is 1s^2 2s^2 2p^3. how many electrons are present in an atom of nitrogen? what is the atomic number for nitrogen?
Since the electronic configuration of nitrogen is 1s² 2s² 2p³, the number of electrons present in the nitrogen atom is 7, and the atomic number of nitrogen is also seven (7).
The atomic number of an atom is the number of protons in the nucleus of an atom. The number of protons defines the properties of an element. For example, if an element with 5 protons is boron atom.
The electronic configuration of an atom represents the number of electrons in each sub-energy level of the atom in the ground state.
The electronic configuration of nitrogen is 1s²2s²2p³. As you know, the electrons around the nucleus are located in energies or levels. Therefore, from the definition of electron configuration, we can say that the nitrogen atom has 2 electrons in the first energy level K of the s-subshell, and in the s-subshell and the p subshell of the second energy level L, respectively There are 2 or 3 electrons.
Therefore, the total number of electrons in the nitrogen atom is 7 (2 + 2 + 3). We know that the number of protons = the number of electrons, so the number of protons in the nitrogen nucleus is 7. Therefore, the nitrogen atom has an atomic number of 7.
For more information about electronic configuration, visit :
https://brainly.com/question/21977349
#SPJ4
5.4 A Sample of sand has a true mass of 1.975g was weighed by six different researchers using the same balance. the following masses were obtained. 1.974g, 1.973g, 1.975g, 1.974g
comment on the precision and accuracy for a sample of sand measurement
The precision of the measurement is very good, measurements are within a very small range of each other. the accuracy of the measurement is not as good since the average measurement was 1.974g while the true mass was 1.975g.
What are precision and accuracy?Precision and accuracy are two important concepts in measurement. Precision is the degree of reproducibility or agreement of a set of measurements. It is usually expressed as the standard deviation of a set of measurements or the coefficient of variation. Accuracy is the degree of closeness to the true or accepted value of a measurement.
It is usually expressed as the difference between the measured value and the true or accepted value.
Learn more about precision and accuracy here:
https://brainly.com/question/5792909
#SPJ1
Assuming that all is working properly, which of the following is at a higher energy level?
If all is working correctly, the electron in a higher orbital or shell will have more energy than the electron in a lower orbital or shell. The following statement is correct: The electron that is farther away from the nucleus is at a higher energy level.
In order for the electron to escape from the atom, it must be excited, meaning that it must absorb energy. When this occurs, the electron moves to a higher energy level, which is farther from the nucleus. Because the electron is now in an excited state, it is more vulnerable to being released from the atom if additional energy is provided to it. According to Bohr's model of the atom, electrons revolve around the nucleus in circular orbits with varying energy levels. As the distance between the nucleus and the electron increases, so does the energy level of the electron. The energy of electrons in the first energy level is the lowest, and as the energy level increases, so does the energy of electrons. As a result, electrons in the outermost shell have the highest energy levels.
To learn more about Nucleus :
https://brainly.com/question/9651421
#SPJ11
Calculate the wavelength in meters of electromagnetic radiation that has a frequency of 640.0 kHz. (c = 3.00 X 108 m/s)
Answer: 468.8m
Explanation:
640kHz x 1000Hz/1kHz = 6.4x10^5 Hz
λ=c/v
3.00x10^8m/s / 6.4x10^5s = 468.75m
List the following compounds from most reactive to least reactive toward electrophilic aromatic substitution. Rank the compounds from most to least reactive. To rank items as equivalent, overlap them. Reset Help toluene benzene ne phenol bromobenzene nitrobenzene
Phenol, toluene, benzene, bromo benzene, and nitrobenzene are the chemicals in this order.
Which aromatic substance reacts least favourably to electrophilic substitution?Due to the M effect, benzosulphonic acid is least reactive in an electrophilic aromatic substitution. Because nitrogen is more electronegative than carbon and functions as an electron withdrawing group, pyridine is less reactive than benzene towards electrophilic aromatic substitution. The meta hydrogen is thus replaced.
Which five electrophilic aromatic substitution reactions occur most frequently?Most beginning organic chemistry courses cover six fundamental electrophilic aromatic substitution reactions: chlorination, bromination, nitration, sulfonation, Friedel-Crafts alkylation, and Friedel-Crafts acylation.
To know more about nitrobenzene visit:-
brainly.com/question/13190784
#SPJ1
Help I don’t know what I am doing
When a particle undergoes beta decay, its atomic number increases by one.
The balanced equation of the beta decay of uranium-235 is given below:
²³⁵₉₂U ---> ⁰₋₁e + ²³⁵₉₃Np
What is beta decay?Beta decay is a type of radioactive decay that occurs when a nucleus emits a beta particle, which is an electron or a positron. During beta decay, a neutron or a proton inside the nucleus is transformed into the opposite type of particle.
In beta minus decay, a neutron in the nucleus is transformed into a proton, which remains in the nucleus, while an electron and an antineutrino are emitted. The electron is known as a beta particle.
In beta plus decay, also called positron emission, a proton in the nucleus is transformed into a neutron, which remains in the nucleus, while a positron and a neutrino are emitted. The positron is also known as a beta particle, but it has a positive charge.
Learn more about beta decay at: https://brainly.com/question/13174032
#SPJ1
Please help!
What is the equilibrium concentration of C if the reaction begins with 0.200 M A and 0.250 M B?
The reaction starts with 0.200 M A and 0.250 M B, the equilibrium concentration of C.3.63x10⁻¹⁰ M.
Why are equilibrium concentrations important?Chemical equilibrium is the state in which both the reactants and the products of a reaction are at a concentration that does not change over time any longer. In this condition, the forward and backward reaction rates are equal.
According to the given information:2A(aq) + B(aq) <==> C(aq)
Equilibrium expression is
K = [C] / [A]2[B]
Prepare an ICE table:
2A(aq) + B(aq) <==> C(aq)
0.2..........0.15...............0........Initial
-2x...........-x.................+x......Change
0.2-2x....0.15-x............x........Equilibrium
Substitute in the equilibrium expression:
1.10x10⁻⁴ = (x) / (0.2-2x)2(0.15-x) ... b/c K is small, we can essentially avoid using the quadratic as follows..
1.1x10⁻⁴ = x/(0.2)2(0.15)
x = (2.2x10₋⁵) (1.65x10⁻⁵)
x = 3.63x10⁻¹⁰ M = [C]
To know more about equilibrium concentrations visit:
https://brainly.com/question/16645766
#SPJ1
ing The
Ionic bonds are made by electrons.
Use the following equations to find the lattice energy of MgCl₂? (hint: first write the equation for
the lattice energy of MgCl2(s))
Mg(g) → Mg2+(g) + 2 e
CI(g) + eCl (g)
Mg(g) + 2Cl(g) → MgCl₂(s)
+2188 kJ/mol
-337 kJ/mol
AH = -642 kJ/mol
Answer:
Explanation:
The lattice energy (LE) of MgCl₂ can be calculated using the Born-Haber cycle, which relates the lattice energy to other thermodynamic quantities such as enthalpy of sublimation, ionization energy, electron affinity, and heat of formation.
The equation for the lattice energy of MgCl₂ is:
LE(MgCl₂) = H(sublimation of Mg) + IE(Mg) + EA(Cl) + 1/2 H₂(Cl₂) - DH(f)(MgCl₂)
where H(sublimation of Mg) is the enthalpy of sublimation of Mg, IE(Mg) is the ionization energy of Mg, EA(Cl) is the electron affinity of Cl, H₂(Cl₂) is the heat of formation of Cl₂, and DH(f)(MgCl₂) is the heat of formation of MgCl₂.
We are given the following equations:
Mg(g) → Mg2+(g) + 2 e ΔH₁ = +2188 kJ/mol
Cl(g) + e → Cl-(g) ΔH₂ = -337 kJ/mol
Mg(s) + Cl₂(g) → MgCl₂(s) ΔH₃ = -642 kJ/mol
Using these equations, we can calculate the values of H(sublimation of Mg), IE(Mg), EA(Cl), H₂(Cl₂), and DH(f)(MgCl₂) as follows:
H(sublimation of Mg) = ΔH₂(Mg(g)) + 1/2 ΔH₃(Cl₂(g)) - ΔH₁(Mg2+(g)) = -2220 kJ/mol
IE(Mg) = ΔH₁(Mg(g)) = +2188 kJ/mol
EA(Cl) = ΔH₂(Cl(g)) = -337 kJ/mol
H₂(Cl₂) = 0 (since Cl₂ is in the gas phase)
DH(f)(MgCl₂) = ΔH₃(Mg(s), Cl₂(g), MgCl₂(s)) = -642 kJ/mol
Substituting these values into the equation for the lattice energy, we get:
LE(MgCl₂) = -2220 + 2188 - 337 + 1/2(0) - (-642) = -3509 kJ/mol
Therefore, the lattice energy of MgCl₂ is approximately -3509 kJ/mol.
Chemistry Help Please! It's worth a lot of points
1.Write the equilibrium expression for the following reactions
a. H2SO4(aq) + H2O(L) ⇆ HSO4-(aq) + H3O+(aq)
b. 4NH3(g) + 5O2(g) ⇆ 4NO(g) + 6H2O(g)
c. NH4Cl(s) ⇆ NH3(g) + HCl(g)
d. N2O4(g) ⇆ 2NO2(g)
2. The following reaction has a K value of 0.050. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
N2(g) + 3H2(g) ⇆ 2NH3(g)
3. The following reaction has a K value of 6.8 x 103. What does that mean about the concentrations of the reactants as compared to the products? Be specific in your answer.
2SO3(g) ⇆ 2SO2(g) + O2(g)
4. When dissolving substances in water, the degree of solubility of a substance is often represented as the solubility product constant (Ksp). The solubility product constant is the same thing as the equilibrium constant for the dissolving reaction. Two substances that dissociate in water are shown below alone with the Ksp.
NaCl(s) ⇆ Na+(aq) + Cl-(aq) Ksp = 36
BaSO4(s) ⇆ Ba2+(aq) + SO42-(aq) Ksp = 1.1 x 10-16
5. Identify and label the Brønsted-Lowry acid, its conjugate base, the Brønsted-Lowry base, and its conjugate acid in each of the following equations:
a. HNO3 + H2O ⟶ H3O+ + NO3−
b. CN− + H2O ⟶ HCN + OH−
c. H2SO4 + Cl− ⟶ HCl + HSO4−
d. HSO4− + OH− ⟶ SO42− + H2O
e. O2− + H2O ⟶2OH−
6. What is the conjugate acid of each of the following? What is the conjugate base of each of the following?
a. OH-
b. H2O
c. HCO3-
d. NH3
e. HSO4-
7. The following acids are shown with their equilibrium constants (also known as the acid dissociation constant). Rank these acids from strongest to weakest. Explain your ranking.
HCN(aq) + H2O(L) ⇆ H3O+(aq) + CN-(aq) K = 6.2 x 10-10
HC2H3O2(aq) + H2O(L) ⇆ H3O+(aq) + C2H3O-(aq) K = 1.75 x 10-5
H2CO3(aq) + H2O(L) ⇆ H3O+(aq) + HCO3-(aq) K = 4.5 x 10-7
HIO4(aq) + H2O(L) ⇆ H3O+(aq) + IO4-(aq) K = 2.3 x 10-2
8. Calculate the pH and the pOH of each of the following solutions.
a. 0.200 M HCl
b. 0.0143 M NaOH
c. 3.0 M HNO3
d. 0.0031 M Ca(OH)2
9. Wine has a pH of 3.6. What are the hydronium and hydroxide ion concentrations?
10. The hydroxide ion concentration in household ammonia is 3.2 x 10-3 M. What is the concentration of hydronium ions?
Answer:
1. Equilibrium expressions:
a. K = [HSO4-][H3O+]/[H2SO4][H2O]
b. K = [NO]^4[H2O]^6/[NH3]^4[O2]^5
c. K = [NH3][HCl]/[NH4Cl]
d. K = [NO2]^2/[N2O4]
2. Since K = 0.050, the concentrations of the reactants (N2 and H2) are larger than the concentrations of the products (NH3).
3. Since K = 6.8 x 10^3, the concentrations of the products (SO2 and O2) are larger than the concentrations of the reactant (SO3).
4. The Ksp expression for each of the reactions is:
a. Ksp = [Na+][Cl-]
b. Ksp = [Ba2+][SO42-]
5. Brønsted-Lowry acids and bases:
a. Acid: HNO3; Conjugate base: NO3-; Base: H2O; Conjugate acid: H3O+
b. Acid: HCN; Conjugate base: CN-; Base: H2O; Conjugate acid: HCN
c. Acid: H2SO4; Conjugate base: HSO4-; Base: Cl-; Conjugate acid: HCl
d. Acid: NH3; Conjugate base: NH2-; Base: H2O; Conjugate acid: NH4+
e. Acid: H2O; Conjugate base: OH-; Base: O2-; Conjugate acid: OH-
6. Conjugate acids and bases:
a. Acid: H2O; Conjugate base: OH-
b. Acid: H3O+; Conjugate base: H2O
c. Acid: H2CO3; Conjugate base: HCO3-
d. Acid: NH4+; Conjugate base: NH3
e. Acid: HSO4-; Conjugate base: SO42-
7. The strongest acid is HIO4 (highest K value), followed by HCN, HC2H3O2, and H2CO3 (lowest K value). The K values represent the degree to which the acids dissociate in solution. HIO4 is a strong acid, meaning it dissociates almost completely in solution, while H2CO3 is a weak acid, meaning it only dissociates partially.
8. pH and pOH calculations:
a. pH = -log[H3O+] = -log(0.200) = 0.699; pOH = -log[OH-] = -log(1.0 x 10^-14/0.200) = 12.301
b. pOH = -log[OH-] = -log(0.0143) = 1.844; pH = 14.000 - pOH = 12.156
c. pH = -log[H3O+] = -log(3.0) = 0.522; pOH = 13.478
d. pOH = -log[OH-] = -log(0.0062) = 2.206; pH = 14.000 - pOH = 11.794
9. Hydronium and hydroxide ion concentrations:
pH = 3.6; hydronium ion concentration = 10^-pH = 3.98 x 10^-4 M; hydro
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
All of the following occur when the temperature of the preoptic area of the hypothalamus drops below its thermostat setting, except thata. blood flow to the skin increases.b. shivering thermogenesis occurs.c. nonshivering thermogenesis occurs.d. epinephrine levels rise.e. blood returning from limbs is shunted to deep veins.
The answer to this question is that blood flow to the skin does not increase; instead, it is directed inward to conserve heat.
The preoptic area of the hypothalamus serves as the body's thermostat, and when its temperature drops below the thermostat setting, a number of physiological processes are triggered. A) Shivering thermogenesis occurs, which is the production of heat by muscular contractions, B) Nonshivering thermogenesis occurs, which is the production of heat by increased metabolic activity in brown adipose tissue, C) Epinephrine levels rise to promote the mobilization of glucose from stored energy sources and D) Blood returning from the limbs is shunted to deep veins to conserve heat. However, the answer to this question is that blood flow to the skin does not increase; instead, it is directed inward to conserve heat.
For more such questions on blood flow
https://brainly.com/question/28023997
#SPJ11
1.Explain why the incomplete combustion of alkanes is dangerous.
2.Outline the environmental impacts of burning fossil fuels such as the alkanes. Include an
explanation of how these impacts can be mitigated.(max 300 words)
Answer- Incomplete combustions of alkanes are dangerous as it leads to toxic gases such as carbon monoxide man odorless,colorless and highly poisonous gas to be released in the air
Environmental impacts of burning fossil fuels such as alkanes can have a massive impact of global warming in which heat is prevented from the leaving the atmosphere due to a build-up of carbon dioxide ad other compounds, collectively known as greenhouse gases. In order to make these impacts less severe scientists have found alternative fuels, such as biofuels and biodiesels, this can reduce the risk of harm to the world as alternative fuels produce less CO2 and air pollutants then others that run on petrol and diesel
What can you infer about these two parts of a microscope?
A They are lightweight
B They contain mirrors and lenses
C They are strong and sturdy
D They are made from glass or plastic
Answer:
the answer is for surely C
Explanation:
you can tell from the way is made and I also have one in my room
what does 2NaOH equal
3. What happens to some metamorphic rocks as they get closer to molten *
magma?
a. They harden
Ob. They cool off
Oc. They change to igneous
Od. They melt
Answer:
C
,
,
,
,
,
,
,
,
,
,
,
,
,
,,
,
,
Which of the following are volume ratios from this equation? Select all that apply.
2H2 + O2 --> 2H2O
The volume ratios from the equation 2H2 + O2 → 2H2O are:
2 L H2 : 1 L O2 (or 2 mol H2 : 1 mol O2)1 L O2 : 2 L H2O (or 1 mol O2 : 2 mol H2O)The coefficients in a balanced chemical equation give the ratio of moles of reactants and products. From the equation 2H2 + O2 → 2H2O, we can see that:
2 moles of H2 react with 1 mole of O2 to produce 2 moles of H2O.Therefore, the following volume ratios are valid:
2 L H2 : 1 L O21 L O2 : 2 L H2OWhat are the reactants?
The reactants are the substances that participate in a chemical reaction and are consumed to form new products. In the equation 2H2 + O2 → 2H2O, the reactants are hydrogen gas (H2) and oxygen gas (O2). These reactants undergo a chemical reaction to form water (H2O) as the product.
To know more about reactants, visit:
https://brainly.com/question/17096236
#SPJ1
What is the experimental mole ratio of baking soda (NaHCO3 ) to sodium chloride (NaCl)?
Answer: 1:1
Explanation:
Since Na trades place with Na it makes it 1:1