How long does it take for approximately 75% of carbon-14 to decay into carbon-12 (in thousands of years)

According to the question the Mass of 8.47 g will form.

Mass is the measure of an object's resistance to acceleration when a net force is applied. It is measured in kilograms in the International System of Units (SI) or in grams in the centimetre-gram-second (CGS) system. Mass is related to weight, which is the measure of the force of gravity on an object. Mass is a measure of the amount of matter an object contains, regardless of its location in a gravitational field.

The reaction that will take place is:

[tex]Mg(NO_3)_2(aq) + Na_3PO_4(aq) → Mg_3(PO_4)2(s) + 3 NaNO_3(aq)[/tex]

The number of moles of each reactant can be calculated using the following equation:

n (reactant) = C (concentration) x V (volume)

Moles of [tex]Mg(NO_3)_2[/tex] = (0.200 M)(140.00 mL) = 0.028 moles

Moles of [tex]Na_3PO_4[/tex] = (0.400 M)(181.00 mL) = 0.072 moles

Since the reaction is a 1:3 mole ratio, the limiting reactant is Mg(NO3)2 since it has the lesser amount of moles. Therefore, 0.028 moles of [tex]Mg_3(PO_4)_2[/tex] will form.

The mass of [tex]Mg_3(PO_4)_2[/tex] can be calculated using the following equation:

[tex]Mass = n (moles) \rightarrow M (molar mass)\\Mass of Mg_3(PO_4)_2 = (0.028 moles)(301.98 g/mol) = 8.47 g[/tex]

To learn more about Mass

https://brainly.com/question/837939

#SPJ4

Acetic acid is the active ingredient in vinegar. It consists of 40.00% C, 6.714% H, and 53.29% O. The empirical formula of acetic acid is CH₂O.

To find the empirical formula of acetic acid, we need to determine the simplest whole number ratio of atoms in the compound.

First, we can assume we have 100 g of acetic acid, so we can convert the percentages to grams. Then, we can convert the mass of each element to moles using their molar masses.

Mass of C: 40.00 g (40.00% of 100 g), moles of C = 40.00 g / 12.01 g/mol = 3.332 mol

Mass of H: 6.714 g (6.714% of 100 g), moles of H = 6.714 g / 1.01 g/mol = 6.645 mol

Mass of O: 53.29 g (53.29% of 100 g), moles of O = 53.29 g / 16.00 g/mol = 3.331 mol

Next, we can divide each of the mole values by the smallest mole value to get the mole ratio in whole numbers:

C: 3.332 mol / 3.331 mol ≈ 1

H: 6.645 mol / 3.331 mol ≈ 2

O: 3.331 mol / 3.331 mol = 1

So, the empirical formula of acetic acid is CH₂O.

To know more about the empirical formula refer here :

https://brainly.com/question/14044066#

#SPJ11

The proper handling and storage of medications is crucial to maintain their efficacy and prevent contamination or other adverse effects.

To determine the number of vials of Bacitracin needed, we can divide the total number of units required by the amount of units per vial:

100,000 units / 25,000 units per vial = 4 vials

Therefore, Dr. Rivera will need 4 vials of Bacitracin for irrigation of the surgical wound.

It's important to note that while 4 vials may be sufficient for this particular order, it's always best to confirm dosages and quantities with a healthcare professional to ensure safe and effective treatment.

For more such questions on contamination

https://brainly.com/question/16264472

#SPJ11

When protactinium-229 goes through two alpha decays, francium-221 is formed. The nuclear symbol for the isotope formed after loss of just one alpha particle is actinium-225 (Ac-225)

When protactinium-229 (Pa-229) loses one alpha particle, it undergoes a single alpha decay. An alpha particle consists of 2 protons and 2 neutrons, so during an alpha decay, the parent nucleus loses 2 protons and 2 neutrons. In this case, after losing one alpha particle, the atomic number of the element will decrease by 2, and the mass number will decrease by 4.

The atomic number of protactinium is 91, and the mass number is 229. After losing one alpha particle, the atomic number becomes 89 (91-2), and the mass number becomes 225 (229-4). The element with an atomic number of 89 is actinium (Ac). Therefore, the nuclear symbol for the isotope formed after the loss of just one alpha particle when protactinium-229 undergoes two alpha decays to form francium-221 is actinium-225 (Ac-225).

To learn more about atomic number here:

https://brainly.com/question/29284261

#SPJ11

The nickname that have given to the warming effect on the global climate based on an overabundance of gases and vapors in the air  is known as the "Greenhouse Effect."

The term is derived from the way a greenhouse works, where sunlight enters through the glass walls and heats up the interior, but the heat is then trapped inside and cannot escape, resulting in higher temperatures.

Similarly, the Earth's atmosphere acts like a greenhouse, allowing sunlight to pass through but trapping the heat that is radiated back from the Earth's surface, leading to a gradual increase in temperature over time.

This effect is caused primarily by human activities such as the burning of fossil fuels, deforestation, and industrial processes, which release large amounts of greenhouse gases such as carbon dioxide, methane, and nitrous oxide into the atmosphere.

To know more about greenhouse effect   click on below link :

https://brainly.com/question/13390232

#SPJ11

The nucleophilic addition of a butyl anion to cyclohexanone involves the attack of the butyl anion on the carbonyl carbon of cyclohexanone.

This is facilitated by the use of a Lewis acid catalyst such as boron trifluoride ([tex]BF_3[/tex]) to activate the carbonyl group. The reaction proceeds through a nucleophilic addition-elimination mechanism involving the formation of an intermediate enolate. The curved arrow notation for this reaction involves the movement of a lone pair of electrons from the oxygen of the carbonyl group to form a pi bond with the adjacent carbon, while simultaneously breaking the pi bond between the carbon and oxygen. The butyl anion attacks the carbonyl carbon, leading to the formation of a tetrahedral intermediate. The resulting product is a substituted cyclohexanone with a butyl group attached to the carbonyl carbon.

To learn more about nucleophilic addition click here https://brainly.com/question/31158017

#SPJ11

Mixing caffeinated energy drinks with alcohol can reduce the sedative effect of alcohol, which may lead to a false sense of sobriety and increased alcohol consumption. This can be dangerous as it can increase the risk of alcohol-related harms, such as impaired judgment, driving under the influence, and alcohol poisoning.

Caffeine is a stimulant that can mask some of the depressant effects of alcohol, such as drowsiness and impaired coordination, while leaving the cognitive and physical impairments associated with alcohol consumption largely intact. This can give the impression of being more alert and capable than one actually is, which can lead to risky behaviors and poor decision-making.

Studies have shown that individuals who consume energy drinks mixed with alcohol are more likely to engage in risky behaviors, such as driving under the influence, fighting, and engaging in unprotected sex, compared to those who consume only alcohol. Additionally, the combination of caffeine and alcohol can cause dehydration, which can exacerbate the negative effects of alcohol on the body.

For these reasons, many health experts advise against mixing caffeinated energy drinks with alcohol and encourage individuals to drink responsibly and in moderation. If you choose to drink alcohol, it's important to pace yourself, know your limits, and avoid driving or engaging in other risky behaviors.

To know more about caffeine effect:
https://brainly.com/question/28479670

#SPJ11

The systematic (IUPAC) name for the given molecule is 2-methyl-1-propanethiol. The accepted method for designating organic compounds in chemistry is the IUPAC name.

The group that has taken the place of the hydrogen molecule in the hydroxyl group of the carboxylic acid is first identified. Similar to Phenyl propionate, which substitutes -H for Propionic acid, Phenyl is written first. Second, the name of the carboxylic acid is written with the suffix -ate in place of the final -ic acid. Similar to how -ate, or propionate, replaces the -ic acid in propionic acid.

The IUPAC  specifies certain guidelines for naming organic compounds. First off, the longest chain of carbon atoms determines the name of the chemical.

The functionally group-attached carbon atoms are numbered in a method that gives them tiny numberings. The suffix or prefix of the functions groups is used to identify them.

The substance is a carboxylic acid belonging to the COOH group. A hydroxyl group is present in the second carbon of the long chain, which has six carbons. As a result, it is called 2-methyl-1-propanethiol.

Learn more about IUPAC  here

https://brainly.com/question/30086770

#SPJ11

The heat added to the system can be found using the formula Q = nCvΔT, where Q is the heat added, n is the number of moles of gas, Cv is the molar specific heat at constant volume, and ΔT is the change in temperature.

Given that the process is isochoric, the volume of the system remains constant. Therefore, we can use the molar specific heat at constant volume, Cv, to calculate the heat added. From the ideal gas law, we know that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin. Rearranging this equation, we can solve for the molar specific heat at constant volume, Cv: Cv = (dU/dT)V = (3/2)R where dU/dT is the change in internal energy with respect to temperature at constant volume. The value of Cv for nitrogen is 20.79 J/mol·K. Now we can calculate the heat added using the formula Q = nCvΔT: Q = (0.5 mol)(20.79 J/mol·K)(100 K) = 1039.5 J Therefore, the heat added to the system is 1039.5 J.

Learn more about isochoric process: https://brainly.com/question/30420499

#SPJ11

The chemical reaction for the formation of nitric acid from nitrogen dioxide, oxygen gas, and water is:
2[tex]NO_{2}[/tex] + [tex]O_{2}[/tex] + [tex]H_{2}O[/tex] → 2[tex]HNO_{3}[/tex]

Acid rain is formed when sulfur dioxide and nitrogen oxides (NOx), which are produced by burning fossil fuels such as coal and oil, react with water, oxygen, and other chemicals in the atmosphere to form sulfuric acid ) and nitric acid.

The chemical reaction for the formation of nitric acid from nitrogen dioxide, oxygen gas, and water is:

2[tex]NO_{2}[/tex] + [tex]O_{2}[/tex] + [tex]H_{2}O[/tex] → 2[tex]HNO_{3}[/tex]

In this reaction, nitrogen dioxide ([tex]NO_{2}[/tex]) and oxygen gas ( [tex]O_{2}[/tex]) react with water ([tex]H_{2}O[/tex] ) to form nitric acid ( [tex]HNO_{3}[/tex]) in aqueous solution.

Nitric acid is a highly corrosive and reactive acid that can cause damage to plants, animals, and humans. When acid rain containing nitric acid falls to the ground, it can leach important nutrients such as calcium and magnesium from the soil, making it difficult for plants to grow.

To know more about Nitric Acid:

https://brainly.com/question/15708135

#SPJ11

The value of K for the reverse reaction, in this case, would be 5 x [tex]10^{-6}[/tex].

For a chemical reaction:

A + B ⇌ C + D

The equilibrium constant, K, is given by the ratio of the product concentrations to the reactant concentrations, with each concentration raised to the power of its stoichiometric coefficient:

K = [C]^c[D]^d / [A]^a[B]^b

where a, b, c, and d are the stoichiometric coefficients of the reactants and products, and [A], [B], [C], and [D] are their respective concentrations at equilibrium.

For the reverse reaction:

C + D ⇌ A + B

The equilibrium constant, K', is given by the same formula, with the concentrations of the products and reactants switched:

K' = [A]^a[B]^b / [C]^c[D]^d

Since the forward and reverse reactions are the same reaction, but in opposite directions, the equilibrium constants for the two reactions are related by the following equation:

K' = 1 / K

where K is the equilibrium constant for the forward reaction.

Step 1: Identify the equilibrium constant for the forward reaction (given in the question):

[tex]K_{forward}[/tex] = 2.0 x [tex]10^{5}[/tex]

Step 2: Calculate the equilibrium constant for the reverse reaction by taking the reciprocal of [tex]K_{forward}[/tex]:

[tex]K_{reverse}[/tex] = 1 / [tex]K_{forward}[/tex]

Step 3: Plug in the value of [tex]K_{forward}[/tex] into the equation from Step 2:

[tex]K_{reverse}[/tex] = 1 / (2.0 x [tex]10^{5}[/tex])

[tex]K_{reverse}[/tex] = 5.0 x [tex]10^{-6}[/tex]

The value of K for the reverse reaction at the same temperature is 5 x [tex]10^{-6}[/tex].

To know more about Equilibrium Constant:

https://brainly.com/question/12269779

#SPJ11

Answer:

5x10-6

Explanation:

A 0.846-g sample containing barium ions is completely dissolve in water and treated with excess Na₂SO₄. 0.746 g of BaSO₄ precipitate. The mass percent of barium in the sample is 8.46%.

The chemical equation for the reaction between barium ions and sodium sulfate is:

Ba²⁺ (aq) + SO₄²⁻ (aq) → BaSO₄ (s)

From the equation, we can see that one mole of barium ions reacts with one mole of sulfate ions to form one mole of solid BaSO₄. Therefore, the number of moles of Ba²⁺ ions in the original sample is the same as the number of moles of BaSO₄ precipitated:

0.746 g BaSO₄ × (1 mol BaSO₄ / 233.38 g BaSO₄) = 0.003194 mol Ba²⁺

The molar mass of Ba is 137.33 g/mol. The mass percent of Ba in the sample is:

(0.846 g Ba / 100 g sample) × 100% = 8.46% Ba

Therefore, the mass percent of barium in the sample is 8.46%.

To know more about the barium ions refer here :

https://brainly.com/question/23895750#

#SPJ11

The percent yield of the reaction is 73.54%.

The percent yield of the reaction can be calculated using the formula:

Percent yield = (actual yield/theoretical yield) x 100%

First, we need to calculate the theoretical yield of magnesium oxide. We can do this by balancing the chemical equation for the reaction between magnesium and oxygen:

2Mg + O₂ → 2MgO

From the balanced equation, we can see that 2 moles of magnesium react with 1 mole of oxygen to form 2 moles of magnesium oxide. The molar mass of magnesium is 24.31 g/mol, and the molar mass of magnesium oxide is 40.30 g/mol.

Using the given mass of magnesium, we can calculate the number of moles of magnesium:

0.216 g Mg x (1 mol Mg / 24.31 g Mg) = 0.00888 mol Mg

Since the reaction is 2:1 between magnesium and oxygen, we need half as many moles of oxygen as magnesium. Therefore, the number of moles of oxygen is:

0.00888 mol Mg x (1 mol O₂ / 2 mol Mg) = 0.00444 mol O₂

The theoretical yield of magnesium oxide can be calculated from the number of moles of magnesium or oxygen, since they react in a 1:1 ratio. Using the number of moles of oxygen, we get:

0.00444 mol O₂ x (2 mol MgO / 1 mol O₂) x (40.30 g MgO / 1 mol MgO) = 0.359 g MgO

Now we can calculate the percent yield:

Percent yield = (actual yield/theoretical yield) x 100%

Percent yield = (0.264 g MgO / 0.359 g MgO) x 100%

Percent yield = 73.54%

To know more about percent yield, refer here:

https://brainly.com/question/11963853#

#SPJ11

The molar mass of the compound is 24.8 g/mol.

Firstly, we need to convert the given volume from mL to L by dividing it by 1000:

112 mL ÷ 1000 mL/L = 0.112 L

Next, we can use the Ideal Gas Law, PV = nRT, to calculate the number of moles of the compound present in the given volume:

PV = nRT

n = (PV) ÷ RT

where P = 750. torr = 750. mmHg (since 1 torr = 1 mmHg)

V = 0.112 L

R = 0.0821 L·atm/(mol·K) (gas constant)

T = 373 K

n = (750. mmHg × 0.112 L) ÷ (0.0821 L·atm/(mol·K) × 373 K)

n = 0.0044 mol

Finally, we can calculate the molar mass (M) of the compound using its mass (m) and number of moles (n):

M = m/n

M = 0.109 g ÷ 0.0044 mol

M = 24.8 g/mol

To know more about  molar mass, refer here:

https://brainly.com/question/22997914#

#SPJ11

In the presence of horseradish peroxidase and H2O2, D-Glucolactone is oxidized.

Horseradish peroxidase (HRP) is an enzyme that catalyzes the oxidation of various substrates in the presence of hydrogen peroxide (H2O2). HRP uses H2O2 as a cosubstrate to oxidize a wide range of organic and inorganic compounds. One of the common substrates used for HRP assay is D-Glucolactone, which is oxidized by HRP in the presence of H2O2 to form 5-ketogluconate and water. The oxidation reaction involves the transfer of electrons from D-Glucolactone to H2O2, which is facilitated by the HRP enzyme.

Ferrocyanide and ferricyanide are not typically oxidized by horseradish peroxidase and H2O2, as they are already in their fully oxidized and reduced states, respectively. However, they can be used as redox indicators to measure the activity of HRP in vitro, as the rate of oxidation of D-Glucolactone can be monitored by the change in the absorbance of ferrocyanide or ferricyanide.

To know more about horseradish peroxidase refer here:

https://brainly.com/question/29576759#

#SPJ11

The reason why a protein may function normally in an aqueous buffer but lose its function when placed in an organic solvent is due to the differences in the chemical properties of these two environments.

Proteins are composed of amino acids that have different chemical properties. Amino acids have polar and nonpolar side chains, which determine their solubility in water or organic solvents. Aqueous buffers are mostly composed of water molecules, which are polar, meaning they have a slight electrical charge that allows them to interact with other polar molecules like amino acids. In contrast, organic solvents are nonpolar and do not have a charge, making it difficult for them to interact with polar amino acids.

When a protein is placed in an organic solvent, the nonpolar side chains of amino acids interact more strongly with the solvent molecules than with the polar amino acids. This causes the protein structure to become disrupted, leading to a loss of its normal function. In an aqueous buffer, the polar nature of the environment allows the protein to maintain its proper structure and function.

In summary, the difference in the chemical properties between aqueous and organic solvents can account for why a protein may function normally in one environment but lose its function in another.

learn more about organic solvent

https://brainly.com/question/28850026

#SPJ11

The hydronium ion, [tex]H_3O^+[/tex], consists of three hydrogen atoms (H) and one oxygen atom (O).

The oxygen atom has six valence electrons, which are paired up in two lone pairs and two of these electrons are shared with the three hydrogen atoms through covalent bonds. The oxygen atom has a formal charge of +1, while the three hydrogen atoms each have a formal charge of 0. The lone pair of electrons on the oxygen atom gives the molecule a tetrahedral shape.
Overall, the hydronium ion can be represented as follows:
  H
  |
H--O--H
  |
  H+
where the dashes represent covalent bonds and the + sign represents the formal charge on the oxygen atom.

To learn more about hydronium ion click here https://brainly.com/question/14619642

#SPJ11

Acetyl CoA is the activated form of acyl groups, formed by citrate synthase and the fuel for the citric acid cycle. The correct answer is option e) A, B, and C.

Acetyl CoA is a molecule that plays multiple roles in cellular metabolism. It is the activated form of acyl groups, which means it is a carrier of acetyl groups in metabolic reactions. Acetyl CoA is also formed by the enzyme citrate synthase as part of the citric acid cycle (also known as the Krebs cycle or TCA cycle).

Additionally, Acetyl CoA serves as a key fuel molecule for the citric acid cycle, where it undergoes further reactions to generate energy through the oxidation of carbon sources like glucose, fatty acids, and amino acids.

Therefore, all three statements (a, b, and c) are correct.

Learn more about Acetyl CoA:

https://brainly.com/question/28163012

#SPJ11

If a strong base is added to an acidic solution until the equivalence point is reached, it means that all the acid has been neutralized, and the solution contains only the conjugate base of the acid and the excess strong base.

At the equivalence point, the moles of strong base added are equal to the moles of acid originally present in the solution.

Since we know the total volume of the solution and the moles of acid originally present, we can calculate the initial concentration of the acid and use it to determine the concentration of the conjugate base at the equivalence point.

Assuming that the initial acid was a monoprotic acid, we can write the balanced chemical equation for the reaction between the acid and the strong base as follows:

HA + OH- → A- + H2O

At the equivalence point, the moles of strong base added (nOH-) are equal to the moles of acid originally present (nHA):

nOH- = nHA

pH = -log([tex]10^-pKa[/tex] x (Vtotal - VHA) / (CHA x VHA))

  = pKa + log(CHA x VHA / (Vtotal - VHA))

This equation assumes that the acid is a monoprotic acid and that its conjugate base does not affect the pH significantly. If the acid is polyprotic or the conjugate base affects the pH,

To know more about strong base

https://brainly.com/question/16749233

#SPJ4

The small cube of gold has a volume of 0.000008 cubic inches (0.2 x 0.2 x 0.2). Using the density of gold (19.3 g/mL), we can convert the volume of the cube to mass. The mass of the cube is 0.0001544 grams (0.000008 x 19.3). Multiplying the mass of the cube by the value of gold ($43.91 per gram), we can find the value of the cube.

To find the mass of the small cube of gold, we first need to calculate its volume. The cube measures 0.2 inches on each side, so its volume is 0.2 x 0.2 x 0.2 = 0.000008 cubic inches. Next, we can use the density of gold (19.3 g/mL) to convert the volume of the cube to mass. Density is the measure of mass per unit of volume, so we can multiply the volume of the cube by the density of gold to get its mass. The mass of the cube is 0.000008 x 19.3 = 0.0001544 grams.

Finally, we can multiply the mass of the cube by the value of gold ($43.91 per gram) to determine its worth. The value of the cube is 0.0001544 x $43.91 = $0.00678. Therefore, if you inherited the small cube of gold, its value is $0.00678.

learn more about density

https://brainly.com/question/1354972

#SPJ11

The statement which is accurate is , the ∆H°soln for Al(NO3)3 is -68.3 kJ/mol so this is an exothermic process where energy in the form of heat is released into the surroundings which is option B.

The enthalpy change of 0.280 kJ is also a negative value, which further confirms that it is an exothermic process. Option A is incorrect as it suggests that the process is endothermic, which is not the case here.

Option C is also incorrect as it suggests that energy is released into the surroundings, which is the opposite of what is observed. The ∆H°soln value for Al(NO3)3 is not relevant to this specific reaction and does not impact the accuracy of the statements.

Therefore, option b is the correct answer.

To know more about enthalpy change click on below link :

https://brainly.com/question/20690888#

#SPJ11

Complete question:

A drop in water temperature is observed when 0.873 g of ammonium nitrate (NH4NO3) is added. The enthalpy change for this reaction is 0.280 kJ. Which of the statements is accurate?

Select one:

a. The ∆H°soln for Al(NO3)3 is +68.3 kJ/ mol so this is an endothermic process where energy in the form of heat is absorbed from the surroundings.

b. The ∆H°soln for Al(NO3)3 is -68.3 kJ/mol so this is an exothermic process where energy in the form of heat is released into the surroundings.

c.The ∆H°soln for Al(NO3)3 is +68.3 kJ/ mol so this is an endothermic process where energy in the form of heat is released into the surroundings.

The pH of a 0.350 M sodium chlorite solution is 7.

The first step to calculate the pH of a sodium chlorite ([tex]NaClO_2[/tex]) solution is to write the balanced chemical equation for the dissociation of [tex]NaClO_2[/tex] in water:

[tex]NaClO_2 + H_2O = HClO_2 + Na^+ + OH^-[/tex]

The equilibrium expression for this reaction is:

[tex]Kb = ([HClO_2][OH^-])/[NaClO_2][/tex]

where Kb is the base dissociation constant for [tex]HClO_2[/tex]. We can use the relationship Kw = Ka x Kb (where Kw is the ion product constant for water) to find the value of Kb, since Ka for [tex]HClO_2[/tex] is known to be [tex]1.1 * 10^{-2}[/tex]:

Kw = Ka x Kb

[tex]1.0 *10^{-14} = 1.1 * 10^{-2} x Kb\\Kb = 9.1 * 10^{-13}[/tex]

Now we can use the Kb expression to find the concentration of hydroxide ions in the solution:

[tex]Kb = ([HClO_2][OH^-])/[NaClO_2]\\9.1 * 10^{-13} = ([HClO_2][OH^-])/0.350\\[OH^-] = (9.1 * 10^{-13} x 0.350)/[HClO_2][/tex]

Since sodium chlorite is a salt, it completely dissociates in water, so the initial concentration of [tex]HClO_2[/tex] is zero. Therefore, the concentration of hydroxide ions in the solution is:

[tex][OH^-] = (9.1 * 10^{-13} * 0.350)/0 = 0[/tex]

This means that the solution is neutral, and the pH is 7.

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

A [tex]Fe(NO_3)_2[/tex] solution receives a current of 4.46 A for 1.60 hours. 0.111 g of iron is plated out of the solution.

To calculate the amount of iron plated out of the solution, we need to use Faraday's law of electrolysis, which states that the amount of a substance produced at an electrode is directly proportional to the amount of electric charge passed through the electrode.

The formula for the amount of substance produced is:

Amount of substance = (Electric current × Time) / (Faraday's constant × Number of electrons transferred)

We know the electric current and the time, but we need to determine the number of electrons transferred and Faraday's constant for iron.

The chemical equation for the reduction of [tex]Fe(NO_3)_2[/tex] is:

[tex]Fe^{2+} + 2e^{-} \rightarrow Fe[/tex]

This means that two electrons are transferred for every [tex]Fe^{2+}[/tex] ion reduced. The Faraday's constant is the charge of one mole of electrons, which is 96,485.3 C/mol.

Using these values, we can calculate the amount of iron plated out of the solution:

Amount of substance = [tex]\frac{4.46 \text{ A} \times 1.60 \text{ h}}{2 \times 96,485.3 \text{ C/mol}}[/tex]

Amount of substance = 0.00198 mol

The molar mass of Fe is 55.85 g/mol, so the mass of iron plated out of the solution is:

Mass = Amount of substance × Molar mass

Mass = 0.00198 mol × 55.85 g/mol

Mass = 0.111 g

To learn more about Faraday's law

https://brainly.com/question/13369951

#SPJ4

Answer:

17 mL

Explanation:

n = concentration × volume

n = 850 × 0.220

n = 187 moles

n = cv

v = n/c

v = 187/11M

v = 17 mL

The formation of krypton from rubidium decay is a result of beta emission.

In this process, a neutron in the rubidium nucleus is converted into a proton, and an electron (beta particle) is emitted. This increases the atomic number by one, changing rubidium into krypton while maintaining the same mass number.

The process of rubidium decay involves the release of a beta particle (electron) from the nucleus, which results in the conversion of a neutron into a proton. This process is known as beta decay, and in the case of rubidium, it leads to the formation of krypton. Therefore, the formation of krypton from rubidium decay is a result of beta emission.

To know more about krypton, visit:

brainly.com/question/2364337

#SPJ11

The nuclear symbol for the isotope formed after loss of just one alpha particle from francium-221 would be Actinium-225 (Ac-225).

When protactinium-229 (Pa-229) loses one alpha particle, it undergoes a single alpha decay. An alpha particle consists of 2 protons and 2 neutrons. Therefore, after the loss of one alpha particle, the isotope formed will have 2 fewer protons and 2 fewer neutrons.

Pa-229 has 91 protons and 138 neutrons (229 - 91 = 138). After losing one alpha particle, the isotope will have 89 protons and 136 neutrons. The element with 89 protons is actinium (Ac). So, the nuclear symbol for the isotope formed after the loss of just one alpha particle is Actinium-225 (Ac-225).

To know more about nuclearsymbol click on below link :

https://brainly.com/question/14816084#

#SPJ11

Moving a hot Erlenmeyer flask directly from crystallization to an ice bath could result in the formation of smaller or unwanted crystals, or the formation of amorphous solids.

This is because rapid cooling can result in rapid crystal nucleation and growth, which can prevent the formation of large, well-defined crystals. It can also lead to the formation of amorphous solids, which have no defined crystal structure and can be more difficult to purify.

Additionally, sudden temperature changes can cause cracking or breaking of the Erlenmeyer flask, potentially leading to the loss of the sample. It is therefore important to allow the solution to cool slowly to room temperature before transferring to an ice bath, to ensure the formation of large, well-defined crystals.

To know more about the Erlenmeyer flask refer here :

https://brainly.com/question/10261429#

#SPJ11

In an electrolytic cell in which an object is being plated with silver, the half-reaction that occurs at the negative electrode (cathode) is:

Ag⁺(aq) + e⁻ → Ag(s)

In this reaction, silver ions in solution (Ag⁺) gain electrons (e⁻) to form solid silver (Ag) on the surface of the object being plated. This process is called reduction, and it occurs at the cathode, which is the negative electrode in an electrolytic cell.

Meanwhile, at the positive electrode (anode), the half-reaction that occurs is the oxidation of a source of silver, such as a silver electrode or a silver compound:

Ag(s) → Ag⁺(aq) + e⁻

In this reaction, solid silver (Ag) loses an electron (e⁻) to form silver ions (Ag⁺) in solution. This process is called oxidation and it occurs at the anode, which is the positive electrode in an electrolytic cell.

Overall, in the electrolytic cell, silver ions are reduced at the cathode to form solid silver on the object being plated, while a source of silver is oxidized at the anode to maintain the concentration of silver ions in solution.

For more information about electrolysis, refer to the link:

brainly.com/question/12054569

#SPJ4

Full Question ;

Electrolysis is used to silver plate an iron spoon by placing it in a solution containing Ag+ ions and connecting the spoon and a silver electrode to a battery. Enter the half‑reaction that takes place when the spoon is plated with silver. Include phases.

This number represents the molar heat capacity of the element, which is the amount of heat required to raise the temperature of one mole of the substance by one degree Celsius (or Kelvin) at constant pressure.

The Law of Dulong and Petit is a physical law that relates the molar heat capacity of a substance to its atomic mass. Specifically, the law states that for most solid elements and compounds, the product of the specific heat capacity and the atomic mass of the substance is approximately equal to 3R, where R is the gas constant (8.314 J/(mol·K)). Therefore, the molar heat capacity of these substances is approximately equal to 3R/m, where m is the molar mass of the substance.

The Law of Dulong and Petit was first proposed in 1819 by French physicists Pierre Louis Dulong and Alexis Thérèse Petit. The law is based on the assumption that all solids have the same average energy per atom at high temperatures, and that this energy is proportional to the absolute temperature.

learn more about Molar heat capacity here:

https://brainly.com/question/28302909

#SPJ11

The name of the major attractive force that holds this substance together is ionic bonding.

Ionic bonding is a type of chemical bond that occurs when one atom loses electrons to become a positively charged ion, while another atom gains electrons to become a negatively charged ion.

The resulting ions are then held together by the strong electrostatic attraction between the oppositely charged ions, forming an ionic compound. In the solid state, the ions are held tightly in a lattice structure, which makes the substance a poor conductor of electricity.

However, in the melted state, the ions are free to move and can carry an electric charge, making the substance a good conductor of electricity. The high melting point of 1200 K indicates that the ionic bonds in this substance are strong, requiring a large amount of energy to break them and melt the substance.

To know more about ionic bonding, refer here:

https://brainly.com/question/11527546#

#SPJ11