How does exhailing remove waste from the body? Explain the systems that make this happen‚ using complete sentences​

The voltage across the element is = 240 V

I hope you understand....

Mark me as brainliest....

Thanks...

Answer:

a. keeps its speed for a short while, then slows and stops. slows steadily until it stops.

Explanation:

Since the tension in the rope, t is greater than the kinetic friction fk, the box is moving forward because there is a net force on it. That is, t - fk = f = ma.

Since there is a net force, there is an acceleration and thus an increasing velocity.

When the rope breaks, the tension, t = 0. So, t - fk = 0 - fk = -fk = ma'.

Now, the net force acting on the box is friction in the opposite direction. This force tends to slow the box down from its initial velocity at acceleration, 'a' until its velocity is zero, where it stops. Since the frictional force is constant, the acceleration, a' on the box is thus constant and the box undergoes uniform deceleration until its velocity is zero.

So, the box keeps its speed for a short while, then slows and stops. slows steadily until it stops.

So, the answer is a.

Answer:

nope don't think so

Explanation:

the heat causes the molecules to move faster therefore expanding in watever it the air is in

Answer:

If the pressure is maintained at a constant value then both statements are equivalent:

P V = n R T    Ideal gas equation

if P, n, and R are maintained at constant values then

V = T and the two expressions are equivalent

Answer:

Newton's third law states that for every action, there is an equal and opposite reaction. That means when you exert a force on an object, the object exerts a force back on you. ... Using shock-absorbing materials can help reduce the amount of force exchanged between the ground and the egg.

Explanation:

I hope it helps you

When one of the tall straws hits the ground, the energy is transferred to the center of the pyramid and then to the egg, but as the middle straw is connected to the outer surface of the egg, energy enters trying to make the egg rotate. This is governed by Newton's third law.

If an object exerts a force on another object, then another object must exert a force of equal magnitude and opposite direction back on first object.

Examples of Newton's third law are:

A swimmer moves forward by pushing off the side of pool. This way, the wall pushes in opposite direction and giving acceleration.

Another example is rockets move forward by expelling gas backward at high velocity. This means the rocket exerts a large backward force on the gas in the rocket combustion chamber, and the gas therefore exerts a large reaction force forward on the rocket. This reaction force is called thrust.

Helicopters similarly create lift by pushing air down, thereby experiencing an upward reaction force. Birds and airplanes also fly by exerting force on air in a direction opposite to that of whatever force they need. For example, the wings of a bird force air downward and backward in order to get lift and forward motion.

To learn more about Newton's third law here

https://brainly.com/question/974124

#SPJ2

Answer:

C. while the magnet is moving

Explanation:

Electromagnetic induction implies the production of electric current by mere movement of a magnet with respect to a coil or wire.

In the given question, current would be induced in the wire only when the magnet moves. That is either when the magnet is pushed into a wire, or when pulled out. But no current would flow through the wire when the magnet is left there for a while.

The current is induced because of the motion involved. Thus, the appropriate option is C.

Answer:

  r = 2,026 10⁹ m  and   T = 2.027 10⁴ s

Explanation:

For this exercise let's use Newton's second law

        F = m a

where the force is electric

        F = [tex]k \frac{q_1q_2}{r^2}[/tex]

Acceleration is centripetal

        a = v² / r

we substitute

        [tex]k \frac{q_1q_2}{r^2} = m \frac{v^2}{r}[/tex]

        r = [tex]k \frac{q_1q_2}{m \ v^2}[/tex]          (1)

let's look for the charge in the insulating sphere

          ρ = q₂ / V

          q₂ = ρ V

the volume of the sphere is

         v = 4/3 π r³

we substitute

        q₂ = ρ [tex]\frac{4}{3}[/tex] π r³

        q₂ = 3 10⁻⁹ [tex]\frac{4}{3}[/tex] π 4³

        q₂ = 8.04 10⁻⁷ C

let's calculate the radius with equation 1

        r = 9 10⁹  1.6 10⁻¹⁹  8.04 10⁻⁷ /(9.1  10⁻³¹ 628 10³)

        r = 2,026 10⁹ m

this is the radius of the electron orbit around the charged sphere.

Since the orbit is circulating, the speed (speed modulus) is constant, we can use the uniform motion ratio

        v = x / t

the distance traveled in a circle is

        x = 2π r

In this case, time is the period

        v = 2π r /T

        T = 2π r /v

let's calculate

        T = 2π 2,026 10⁹/628 103

        T = 2.027 10⁴ s

Answer:

157n is the correct answer

Explanation:

It is known that charges tend to move from a higher potential towards lower potential. As a result, charges tend to move from a positive terminal to negative terminal of the battery.

For example, at a certain height water is stored in a water tank. This height is correspondent to the constant potential and water contained is the charge present in the battery.

When a pipe is connected from the tank to the ground then water will start moving towards the ground and similarly if a conducting wire is connected across the battery then charge will also begin to flow in the same direction which is called current.

Explanatio

omega=2pi/T

Answer:

0

0000

Explanation:

Answer:

The ceramic tile will stand the force of 5 N.

Explanation:

Step 1: Calculate the area (A) of the ceramic tile

We will use the formula for the area of a square.

A = 50 cm × 50 cm = 2500 cm²

Step 2: Convert "A" to in²

We will use the conversion factor 1 in² = 6.45 cm².

2500 cm² × 1 in²/6.45 cm² = 3.9 × 10² in²

Step 3: Calculate the pressure (P) exerted by a force (F) of 5 N

We will use the following expression.

P = F/A

P = 5 N / 3.9 × 10² in² = 0.013 N/in²

Since the pressure exerted would be less than the maximum pressure resisted (40 N/in²), the ceramic tile will stand the force of 5 N.

The density is the ratio of mass to volume of a substance.

The density bottle is used to obtain the density of  substance by measuring the volume of the fluid displaced.

If the mass of copper turnings are previously weighed and known, the volume of the fluid displaced in the density bottle is the volume of the copper turning.

Hence;

Density = mass/ volume

Learn more about density:https://brainly.com/question/15164682?

#SPJ1

Answer:

1. 5.825 × 10¹⁷ J

2. i. $ 29.125 billion ii. I would not invest in the company

3. A nuclear reaction would occur if the payload hits an airplane flying overhead and dissipates all its kinetic energy in the collision.

4. a i. The momentum will not be relativistic

ii. This is because objects with large masses do not move at relativistic speeds

b i. 155 m/s

ii. This speed wouldn't be a problem for the ship.

Explanation:

1.  A typical payload they claim to launch will weigh 1 kilogram and be accelerated to 90% the speed of light. How much electrical energy will the rail gun require to launch the probe, assuming it is 20% efficient at converting electrical energy to projectile kinetic energy?

The kinetic energy of the payload is K = (γ - 1)mc² where m = mass of payload = 1 kg, c = speed of light = 3 × 10⁸ m/s and γ = 1/√(1 - β²) where β = 0.9 (since the payload moves at 90 % speed of light)

So, K = (γ - 1)mc²

= (1/√(1 - β²) - 1)mc²

= (1/√(1 - (0.9)²) - 1) × 1 kg × (3 × 10⁸ m/s)²

= (1/√(1 - 0.81) - 1) × 1 kg × (3 × 10⁸ m/s)²

= (1/√0.19 - 1) × 1 kg × (3 × 10⁸ m/s)²

= (1/0.436 - 1) × 1 kg × (3 × 10⁸ m/s)²

= (2.294 - 1) × 1 kg × (3 × 10⁸ m/s)²

= 1.294 × 1 kg × 9 × 10¹⁶ m²/s²

= 11.65 × 10¹⁶ kgm²/s²

= 1.165 × 10¹⁷ J

Let E be the total electrical energy of the rail gun. Since 20 % of this energy is converted to kinetic energy of the payload, we have

20 % of E = K

0.2E = K

E = K/0.2

= 1.165 × 10¹⁷ J/0.2

= 5.825 × 10¹⁷ J

2 Given that typical electrical costs are about 5 cents/MJ, how much would this launch cost? Would you invest in this company?

i. how much would this launch cost?

Since the total energy required is E = 5.825 × 10¹⁷ J = 5.825 × 10¹¹ MJ and it costs 5 cent/MJ. So the total cost of energy will be total energy rate = 5.825 × 10¹¹ MJ × 5 cent/MJ = 29.125 × 10¹¹ = 2.9125 × 10¹² cents. Converting this to dollars, we have 2.9125 × 10¹² cents/100 cents/dollar = 2.9125 × 10¹⁰ dollars = 29.125 × 10⁹ dollars = 29.125 billion dollars = $ 29.125 billion

ii. Would you invest in this company?

I would not invest in the company

3. You are also concerned about safety. What happens if this projectile were to hit an airplane that is flying overhead and dissipate all of its kinetic energy in the collision? To give you a sense of scale, a large nuclear explosion generates about 1015 J of energy.

Since the kinetic energy of the payload is 1.165 × 10¹⁷ J and a nuclear explosion generates about 10¹⁵ J of energy,  then a nuclear reaction would occur if the payload hits an airplane flying overhead and dissipates all its kinetic energy in the collision.

4. The system must be able to launch probes to all parts in the sky and must be transportable on a ship. Assume that the rail gun is mounted on a frigate-class navy ship (weight = 4,000 metric tons).

a. Will the recoil momentum of the ship be relativistic? Justify your argument.

i. Will the recoil momentum of the ship be relativistic?

The momentum will not be relativistic.

ii. Justify your argument.

This is because objects with large masses do not move at relativistic speeds. Since the speed cannot be relativistic, its momentum which is the product of mass and speed is non-relativistic

b. At what speed will the ship recoil after it launches a probe? Do you think that this is a problem for the ship?

i. At what speed will the ship recoil after it launches a probe?

Since the total energy of the payload E' = K + mc² = 1.165 × 10¹⁷ J + 1 kg × (3 × 10⁸ m/s)² = 1.165 × 10¹⁷ J + 1 kg × 9 × 10¹⁶ m²/s² = 11.65 × 10¹⁶ J + 9 × 10¹⁶ J = 20.65 × 10¹⁶ J

Also, E'² = (pc)² + (mc²)² where p = momentum of payload

So, making p subject of the formula, we have

(pc)² = E'² - (mc²)²

pc = √[E'² - (mc²)²]

p = √[E'² - (mc²)²]/c

substituting the values of the variables into the equation, we have

p = √[E'² - (mc²)²]/c

p = √[(20.65 × 10¹⁶ J)² - 1kg × (3 × 10⁸ m/s²)²]/3 × 10⁸ m/s

p = √[(20.65 × 10¹⁶ J)² - (1kg × 9 × 10⁸ m²/s²)²]/3 × 10⁸ m/s

p = √[426.4225 × 10³² J² - 81 × 10³² J²]/3 × 10⁸ m/s

p = √[345.4225 × 10³² J²]/3 × 10⁸ m/s

p = 18.59 × 10¹⁶/3 × 10⁸ m/s

p = 6.20 × 10⁸ kgm/s

From the law of conservation, this momentum of the payload equals the momentum of recoil of the ship.

So, p = m'v where m' = mass of navy ship = 4,000 metric tons = 4,000 × 1000 kg = 4 × 10⁶ kg and v = speed of navy ship

So, v = p/m'

= 6.20 × 10⁸ kgm/s ÷ 4 × 10⁶ kg

= 1.55 × 10² m/s

= 155 m/s

ii. Do you think that this is a problem for the ship?

Since the ship's speed is 155 m/s, which is small for an object with such a large mass, this speed wouldn't be a problem for the ship.

The statement best describes what happens to the electrical force between the objects when moved three times farther apart from each other is the force of attraction decreases. The correct option is B.

What is force of attraction?

The objects when placed at a distance, they are attracted by the gravitational force of attraction.

Gravitational force of attraction is directly proportional to the product of masses and inversely proportional to the square of distance between them.

Two oppositely charged objects are separated by a small distance. The objects are then moved three times farther apart from each other.

Force is indirectly proportional to the distance. So, when the distance increases the force of attraction decreases.

Thus, the correct option is B.

Learn more about force of attraction.

https://brainly.com/question/807785

#SPJ2

Answer:

(a) 1470 N/m

(b) 48.2 m

Explanation:

Applying,

(a) F = ke.................... Equation 1

Where F = force applied to the spring, k = spring constant, e = extension

make k the subject of the equation

k = F/e............... Equation 2

But,

F = mg............. Equation 3

Where m = mass, g = acceleration due to gravity

Substitute equation 3 into equation 2

k = mg/e.............. Equation 4

From the question,

Given: m = 6 kg, e = 42-38 = 4 cm = 0.04 m

Constant: g = 9.8 m/s²

Substitute these values into equation 4

k = (6×9.8)/0.04

k = 1470 N/m

(b) Consider the end of the spring to the left which exert a force to the right

Then,

e = F/k............. Equation 5

Given: F = 150 N, k = 1470 N/m

Substitute these values into equation 5

e = 150/1470

e = 0.102 m

Hence the length of the spring is

L = 0.38+0.102 = 0.482 cm = 48.2 m

Answer:

b. 48.0 g.

Explanation:

Given;

mass of the exoplanet, [tex]M_p = 3M_e[/tex]

radius of the exoplanet, [tex]r_p = \frac{1}{4} r_e[/tex]

The acceleration due to gravity of the planet is calculated as;

[tex]g_p = \frac{GM_p}{r_p^2} \\\\for \ Earth's \ surface\\\\g = \frac{GM_e}{r_e^2} \\\\G = \frac{gr_e^2}{M_e} = \frac{g_pr_p^2}{M_p} \\\\\frac{gr_e^2}{M_e} = \frac{g_p(\frac{r_e}{4}) ^2}{3M_e} \\\\\frac{gr_e^2}{M_e} = \frac{g_pr_e ^2}{16\times 3M_e} \\\\g = \frac{g_p}{48} \\\\g_p = 48 \ g[/tex]

Therefore, the correct option is b. 48.0 g

Answer: I'd go with Option B if you're allowed to pick One Option Only.

Option A is wrong. Electric Forces arent Non - Conservative. They're Conservative forces.

Option B: We Can Only Define Potential Energies for conservative Forces/fields✅

Option C is wrong. Since the Electric Force is Conservative... It doesn't depend on the path taken.

Option D... There's a Point where the electric Potential Energy is Zero but the separation Distance Would be large.

E is wrong because the Workdone around a closed path is Zero.

The electric potential energy results from the conservative Coulomb forces.

The electric potential energy is the potential energy that results due to the conservative Coulomb forces and is always associated with the set of two charged particles.

Any object can have electric potential energy by two key elements first is its own charge and the second is its position with respect to the other charged particle.

The electric potential energy-containing only one point charge will be zero. Because there are no other sources of electrostatic force against which an external agent must do work in moving the point charge from infinity to its final position.

Thus the electric potential energy results from the conservative Coulomb forces.

To know more about Electric potential energy follow

https://brainly.com/question/24648428

Answer: The new pressure will be 1.69 atm

Explanation:

Gay-Lussac's law states that the pressure of the gas is directly proportional to the temperature of the gas at constant volume and the number of moles.

Mathematically,

[tex]P\propto T[/tex]                    (At constant volume and number of moles)

OR

[tex]\frac{P_1}{T_1}=\frac{P_2}{T_2}[/tex]          .....(1)

[tex]P_1\text{ and }T_1[/tex] are the pressure and temperature of the gas

[tex]P_2\text{ and }T_2[/tex] are the final pressure and temperature of the gas

We are given:

[tex]P_1=1.65atm\\T_1=23^oC=[23+273]K=296K\\V_2=?mL\\T_2=30^oC=[30+273]K=303K[/tex]

Putting values in equation 1, we get:

[tex]\frac{1.65atm}{296K}=\frac{P_2}{303K}\\\\P_2=\frac{1.65\times 303}{296}\\\\P_2=1.69atm[/tex]

Hence, the new pressure will be 1.69 atm

Answer:

belpw

Explanation:

The distance prior to the sliding friction dispersing her energy would be:

- The distance will remain unaffected by the sliding friction i.e. 354m

As we know, When Sliding friction dissolves her energy, leading her Kinetic Energy to turn 0 on coming to the state of rest. So,

[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]            (∵ Work in -ve denotes it is done opposite to friction)

Given that,

m(mass) [tex]= 50 kg[/tex]

v(velocity) [tex]= 30 km/hr[/tex] or [tex]8.33 m/s[/tex]

The coefficient of Kinetic Friction [tex]= 0.01[/tex]

g(gravitational force) [tex]= 9.8 m/s^2[/tex]

Initial Velocity(u) [tex]= 30[/tex] × [tex]1000/3600 m/s[/tex]

[tex]= 8.33 m/s[/tex]

Now by employing the provided values,

[tex]F =[/tex] μ[tex]mg[/tex]

[tex]= (0.01) (50) (9.8)[/tex]

[tex]= 4.9[/tex]

∵ [tex]F = 4.9 N[/tex]

By using the above expression, we will find the distance;

[tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]

⇒ [tex]1/2 (50) (0)^2 - 1/2 (50) (8.33)^2 = -4.9(S)[/tex]

⇒ [tex]1734.7225 = 4.9S[/tex]

⇒ [tex]S = 1734.7225/4.9[/tex]

∵ [tex]S = 354 m[/tex]

Because [tex]1/2 mv^2 - 1/2 mu^2 = -W[/tex]  [tex]= -[/tex] μmgS

⇒ [tex]S = (u^2 - v^2)[/tex]/2μ[tex]g[/tex]

Thus, the distance will remain unaffected by the sliding friction i.e. 354m

Learn more about "Friction" here:

brainly.com/question/2122951

Answer:

Option C

Explanation:

C. Convection...

The phrase 'hot air rises'describe the convection as a type of heat transfer therefore the correct answer is option C.

It is the type of  heat transfer in which the heat is transferred from the bulk motion of the particles of liquid and gases due to the presence of temperature gradient.
The hot air rises is one of the best example of convection currents
The boiling water is also an example of convection heat transfer process in which the hot water rises to the top of the surface due to the bulk molecular movement of convection current .

The hot air rides is the bulk movement of the gas molecules because of the presence of the temperature gradients resulting in the varied density of air ,the hot air rising to the surface have less density as compared to the air settling near the surface ,the convection current phenomenon is responsible for the phrase  "hot air rises" ,therefore the correct option is the option C.

Learn more about convection from here
https://brainly.com/question/16635311

#SPJ2

Answer:

the electric field is  3.91 x 10⁶ N/C

Explanation:

Given the data in the question;

Electric field at a point due to point charge is;

E = kq/r²

where k is the constant, r is the distance from centre of terminal to point where electric field is, q is the excess charge placed on the centre of terminal of Van de Graff,a generator

Now, given that r = 3.9 m, k = 9.0 x 10⁹ Nm²/C², q = 6.60 mC = 6.60 x 10⁻³ C

so we substitute into the formula

E = [(9.0 x 10⁹ Nm²/C²)( 6.60 x 10⁻³ C)] / ( 3.9 )²

E = 59400000 / 15.21

E = 3.91 x 10⁶ N/C

Therefore, the electric field is  3.91 x 10⁶ N/C

Answer:

C) 1.4W

Explanation:

Given;

energy of the battery, E = 10,000 J

duration of the battery, t = 2 hours

The power consumption of the battery is calculated as;

[tex]Power = \frac{Energy}{time} \\\\Power = \frac{10,000}{2 \times 3600 } \\\\Power = 1.4 \ J/s = 1.4 \ W[/tex]

Therefore, the power consumption of the battery is 1.4 W

Answer:

T = 20.84°C

Explanation:

From the law of conservation of energy:

Heat Lost by Copper Block = Heat Gained by Aluminum Calorimeter + Heat Gained by Water

[tex]m_cC_c\Delta T_c = m_wC_w\Delta T_w + m_aC_a\Delta T_a[/tex]

where,

[tex]m_c[/tex] = mass of copper = 227 g

[tex]m_w[/tex] = mass of water = 844 g

[tex]m_a[/tex] = mass of aluminum = 155 g

[tex]C_c[/tex] = specific heat capacity of calorimeter = 385 J/kg.°C

[tex]C_w[/tex] = specific heat capacity of water = 4200 J/kg.°C

[tex]C_a[/tex] = specific heat capacity of aluminum = 890 J/kg.°C

[tex]\Delta T_c[/tex] = change in temperature of copper = 283°C - T

[tex]\Delta T_w[/tex] = change in temperature of water = T - 14.6°C

[tex]\Delta T_a[/tex] = change in temperature of aluminum = T - 14.6°C

T = equilibrium temperature = ?

Therefore,

[tex](227\ g)(385\ J/kg.^oC)(283^oC-T)=(844\ g)(4200\ J/kg.^oC)(T-14.6^oC)+(155\ g)(890\ J/kg.^oC)(T-14.6^oC)\\\\24732785\ J - (87395\ J/^oC) T = (3544800\ J/^oC) T - 51754080\ J+ (137950\ J/^oC) T-2014070\ J\\\\24732785\ J +51754080\ J+2014070\ J = (3544800\ J/^oC) T+(137950\ J/^oC+(87395\ J/^oC) T\\\\78560935\ J = (3770145\ J/^oC) T\\\\T = \frac{78560935\ J}{3770145\ J/^oC}[/tex]

T = 20.84°C

Answer:

A homogeneous mixture is a type of mixture in which the composition is uniform and every part of the solution has the same properties. Example, air

Explanation:

Answer:

B) (80m/s/s)(70kg)=5600N + Fg = 5600N+(70kg)(9.8N/kg)~5600N+700N=6300N

Explanation:

The total force by the chair is given by the following formula:

[tex]F = m(g+a)[/tex]

where,

F = Force = ?

m = mass of person = 70 kg

g = value of acceleration dueto gravity = 9.81 m/s²

a = acceleration of ejection seat = 8g = 80 m/s²

Therefore,

[tex]F = mg+ma \\F = (70\ kg)(9.8\ m/s^2)+(70\ kg)(80\ m/s^2)\\F = 6300 N[/tex]

Therefore, the correct option is:

B) (80m/s/s)(70kg)=5600N + Fg = 5600N+(70kg (9.8N/kg)~5600N+700N=6300N

Answer:

Changes in climate conditions, especially the warming of global temperatures increases the likelihood of weather-related natural disasters. ... This is most visible when seen through changes in the intensity and frequency of droughts, storms, floods, extreme temperatures and wildfires.

Answer:

The height of the hill is 125m.

Explanation:

Since the ball is projected horizontally from the top of a hill, there is no vertical component of the velocity of projection. Therefore, so far as motion in the vertical direction is concerned, the ball is just dropped, ie its initial velocity u is merely 0 m/s. It reaches the ground after 5 seconds from the moment of projection, under the action of accerelation due to gravity.

Using,

s = u t + ½ a t². In this expression u= 0 m/s, a = 10m/s², t = 5 s. Substituting in the equation we get,

s = 0× t + ½ ×10 m/s²× 5²s²= 5× 25 m = 125m.

Answer:

Stars emit colors of many different wavelengths, but the wavelength of light where a star's emission is concentrated is related to the star's temperature - the hotter the star, the more blue it is; the cooler the star, the more red it is

Answer:

Stars emit colors of many different wavelengths, but the wavelength of light where a star's emission is concentrated is related to the star's temperature – the hotter the star, the more blue it is; the cooler the star, the more red it is.

Explanation:

Pa brainliest po ty

Answer:

the electric potential difference between the point at the center of the ring and a point on its axis ΔV is [tex]( 0.8356 )[/tex][tex]\frac{kQ}{R}[/tex]

Explanation:

Given the data in the question;

electric potential at the center of the ring V₀ = kQ / R

electric potential on the axis point Vr = kQ / √( R² + x² )

at a distance 6R from the center,

point at x = 6R

so distance circumference r = √( R² + (6R)² )

so

electric potential on the axis point Vr = kQ / √( R² + (6R)² )

Vr = kQ / R√37

Now

ΔV = V₀ - Vr

we substitute

ΔV = ( kQ / R) - ( kQ / R√37 )

ΔV =  kQ/R( 1 - 1/√37 )

ΔV =  kQ/R( 1 - 0.164398987 )

ΔV =  kQ/R( 0.8356 )

ΔV = [tex]( 0.8356 )[/tex][tex]\frac{kQ}{R}[/tex]       { where k = [tex]\frac{1}{4\pi e_0}[/tex] }

Therefore, the electric potential difference between the point at the center of the ring and a point on its axis ΔV is [tex]( 0.8356 )[/tex][tex]\frac{kQ}{R}[/tex]

Answer:

a camera employs camera lens to firm some images.

Explanation:

hope this helps.