How does C6H12O6 dissociate?

The molarity of the hydrochloric acid solution with a mass percentage of 28.0% and a density of 1.141 g/mL is approximately 8.78 M.

To find the molarity of the solution, we need to know the mass of hydrochloric acid in the solution, which we can calculate using the density and mass percentage information given.

Let's assume we have 100 g of the solution, which means we have 28.0 g of hydrochloric acid (28.0% of 100 g). Using the density of the solution, we can calculate the volume of the solution as:

volume = mass / density = 100 g / 1.141 g/mL ≈ 87.6 mL

Now we can calculate the molarity of the solution using the formula:

molarity = moles of solute / volume of solution in liters

We need to convert the mass of hydrochloric acid to moles using its molar mass. The molar mass of hydrochloric acid (HCl) is 36.46 g/mol (1 mol of HCl contains 1 mol of hydrogen and 1 mol of chlorine, which have atomic masses of 1.008 and 35.45, respectively).

moles of HCl = mass of HCl / molar mass of HCl

moles of HCl = 28.0 g / 36.46 g/mol ≈ 0.768 mol

Now we can calculate the molarity of the solution:

molarity = 0.768 mol / (87.6 mL / 1000 mL/L) ≈ 8.78 M

Therefore, the molarity of the hydrochloric acid solution with a mass percentage of 28.0% and a density of 1.141 g/mL is approximately 8.78 M.

Learn more about mass percentage here :

brainly.com/question/30129459

#SPJ4

Sucrose is long, straight-chain type of starch that makes up about 20% of digestible starch.

Sucrose, a disaccharide, is a sugar made out of glucose and fructose subunits. It is created normally in plants and is the primary constituent of white sugar. It has the atomic equation C₁₂H₂₂O₁₁.

For human utilization, sucrose is extricated and refined from one or the other sugarcane or sugar beet. Sugar plants - commonly situated in tropical districts close where sugarcane is developed - squash the stick and produce crude sugar which is delivered to different production lines for refining into unadulterated sucrose. Sugar beet production lines are situated in mild environments where the beet is developed, and process the beets straightforwardly into refined sugar.

Starch or amylum is a polymeric sugar comprising of various glucose units joined by α- - D glycosidic bonds. This polysaccharide is delivered by most green plants for energy capacity. Around the world, it is the most considered normal starch in human weight control plans, and is contained in huge sums in staple food sources like wheat, potatoes, maize, rice, and cassava.

To know more about sucrose,visit here:

https://brainly.com/question/28869238

#SPJ4

Proton A couples to Proton B. Proton A posseses a J -value of 3.0 Hz. What do you expect the J -value Proton B posseses to be 3.0 Hz. The correct answer is D.

In freely rotating groups, protons in anti-conformation have a frequency range of J= 5–12 Hz while those in gauche conformation have a range of J= 2-4 Hz. Option D is correct as a result.

The J value of a quartet may always be determined by counting the distances between the various lines. When working with actual data, it is preferable to utilize the average line spacing, which is determined by dividing the distance between the first and last lines by three.

The coupling constant, usually denoted as J, is used to calculate the strength of the interaction between a pair of protons in an atom.

It is designated by the letter "J" with frequency units and is mostly used to measure the interaction or strength of the splitting effect (Hz).

In the simplest case, the coupling constant for a doublet is equal to the difference between its two peaks.

As a result, Proton B has a J-value of 3.0 Hz.

Your question is in complete but most probably your full question was

Proton A couples to Proton B. Proton A posseses a J-value of 3.0 Hz. What do you expect the J-value Proton B posseses to be? a) Less than 3.0 Hz b) Greater than 3.0 Hz c) No J-value because coupling is only one-way d) 3.0 Hz

Learn more about Proton here:

brainly.com/question/1252435

#SPJ4

The type of polyester that is formed in the reaction between glycerol and phthalic anhydride is known as glyceryl phthalate, or GP for short.

GP is a condensation polymer that is formed by the reaction of glycerol and phthalic anhydride. The reaction involves the formation of ester bonds between the hydroxyl groups of glycerol and the carboxylic acid groups of phthalic anhydride. The resulting polymer has good flexibility, softness, and low toxicity, which make it useful for certain applications, such as in the production of plasticizers for PVC.

However, glyceryl phthalate is not as widely used as other polyesters like polyethylene terephthalate (PET), which is formed from the reaction of ethylene glycol and terephthalic acid, and has much broader applications.

To know more about the phthalic anhydride, here

brainly.com/question/12972518

#SPJ4

The molecular formula for the simple sugar glucose is C₆H₁₂O₆. The compound represents the empirical formula for glucose is CH₂O.

The molecular formula defined as the formula in which the atoms in the molecule is present in the fixed ratio. The  empirical formula is the formula in which the atoms in the molecule are present in the lowest ratio. The empirical formula tells the simplest ratio of the atoms in the molecule or the compound.

Empirical formula = molecular formula / n

Where, the value of the n for the glucose  is 6

The empirical formula for the = CH₂O

Thus, the empirical formula for the glucose is CH₂O.

To learn more about empirical formula here

https://brainly.com/question/491767

#SPJ4

Carbon has a tetrahedral geometry, and this information is important in determining the chemical and physical properties of the molecule in which carbon is present.

The VSEPR (Valence Shell Electron Pair Repulsion) theory is a model used to predict the geometry of molecules based on the arrangement of electron pairs around the central atom. In the case of carbon, its electronic configuration is 1s² 2s² 2p², which means that it has four valence electrons in its outermost shell.

Carbon typically forms four single covalent bonds, which implies that it has four electron pairs around it. The geometry of carbon will be tetrahedral, as it has four electron pairs around it, all of which repel each other and seek the maximum possible distance from each other.

To know more about the VSEPR geometry, here

brainly.com/question/11605825

#SPJ4

The empirical formula of oxalic acid is CHO₂. The molecular mass is 90 g/mol. Then, its molecular formula is C₂H₂O₄.

The empirical formula of a compound is derived from the number of moles of each element present and converting their ratio of number of moles into whole numbers.

The molecular formula is derived by dividing the molecular mass by the formula mass and multiply the empirical formula with the obtained integer.

Given mass  of carbon =1.94 g

no.of moles = 1.94/12 = 0.161

mass of H = 0.160

no.of moles  = 0.160

mass of oxygen = 5.16 g

no.of moles = 5.16 g/16 = 0.322

Now, divide the ratio by 0.160 to convert them to whole numbers, we get the empirical formula CHO₂.

Given molar mass = 90 g/mol

Formula mass = 12 + 1 + 32  = 45 g

then, 90/45 = 2

multiply the formula mass by 2 we get the molecular formula, C₂H₂O₄.

Find more on molecular formula:

brainly.com/question/28647690

#SPJ9

The presence of a lone pair on the oxygen atom makes OH a good leaving group.

A good leaving group is a molecular fragment that can depart from the substrate without undergoing rearrangement or reacting further. In general, the ability of a group to act as a leaving group depends on its stability after leaving. The stability of a leaving group is often enhanced by the inductive and resonance effects of nearby functional groups.

In the case of OH, its lone pair can act as a nucleophile and participate in reactions, but it can also be delocalized via resonance with the adjacent atoms. However, upon protonation, the O-H bond becomes polarized and the oxygen atom becomes a better leaving group.

To know more about the OH, here

https://brainly.com/question/2911201

#SPJ4

Answer:

a. There is only one atomic number possible for nitrogen (N), which is 7. The atomic number represents the number of protons in the nucleus of an atom. The type of subatomic particle corresponding to the atomic number is the proton.

b. There are multiple possibilities for the mass number of nitrogen. The mass number is the sum of the number of protons and neutrons in the nucleus of an atom. Nitrogen can have different isotopes, which are atoms of the same element that have different mass numbers due to having different numbers of neutrons in their nuclei. Some common mass numbers for nitrogen include 14 and 15. The type of subatomic particle corresponding to the mass number is the neutron. When two atoms of an element have different mass numbers, they are called isotopes.

c. There are multiple possibilities for the atomic mass of nitrogen. The atomic mass is the weighted average of the masses of all the isotopes of an element, taking into account their relative abundances. The most common isotope of nitrogen is 14N, which has an atomic mass of 14.00674 u (unified atomic mass units). Other isotopes of nitrogen include 15N, which has an atomic mass of 15.00011 u. The atomic mass of an element is calculated by summing the masses of all of its isotopes and weighting them according to their relative abundances.

A pseudo first order experiment is a kinetic study in which the concentration of one of the reactants is varied in such a way that the reaction rate appears to be first order with respect to that reactant.

Some of the characteristics of a pseudo first order experiment are:

1. Limiting reactant: The concentration of one reactant is much higher than the other reactants, and the reaction rate is determined by the rate-limiting step, which involves this limiting reactant.

2.Concentration change: The concentration of the limiting reactant is changed during the reaction and monitored over time, while the concentration of the other reactants remains constant.

3.Rate expression: The reaction rate is proportional to the concentration of the limiting reactant, which results in a first-order rate expression.

4.Reaction order: The reaction appears to be first order with respect to the limiting reactant, but the overall reaction order may be different.

5.Application: Pseudo first order experiments are used to determine the rate-limiting step in complex reactions and to study the effect of reaction conditions on the rate of a reaction.

To learn more about Pseudo first order :

https://brainly.com/question/29306067

#SPJ4

The Cis isomers are the molecules with the same connectivity of the atoms. The Trans isomers is the molecules with the same side of the groups placed on the opposite sides of the double bond.

The Cis isomers are the molecules that have the same connectivity of the atoms. The feature is the same side of the groups placed on the same side of the double bond. The  Trans isomers are the the molecules with same side of the groups placed on the opposite sides of the double bond.

Cis isomers are almost the polar compound. The Trans isomers are not the very polar one. Many of the trans isomers are the  non-polar molecules.

To learn more isomers here

https://brainly.com/question/12796779

#SPJ4

The internal energy change for this reaction is +1730 J.

What is internal energy?

Internal energy is the total energy contained within a system, including the kinetic and potential energies of its particles (atoms, molecules, ions, etc.). It is a state function that depends only on the current state of the system, including its temperature, pressure, volume, and composition.

The internal energy change (ΔU) for this reaction can be calculated using the first law of thermodynamics:

ΔU = Q - W

where Q is the heat released to the surroundings, and W is the work done by the gases.

Substituting the given values, we get:

ΔU = 2290 J - 560 J

ΔU = 1730 J

Therefore, the internal energy change for this reaction is +1730 J.

To learn more about internal energy:

https://brainly.com/question/17136958

#SPJ4

Transition is associated with the greatest energy change is n=1 to n=3  As you get to higher energy shells, the difference between becomes smaller.

To learn more about energy shells refer to:

https://brainly.com/question/1370081

#SPJ4

In the event that there is too much solvent present, the solution can become too diluted for crystals to form.

Hence, the phone you're using must be hot and boiling for crystallisation to take place or for crystals to form. The solvent's boiling point should be between 50 and 120 °C. Impurities should either be insoluble in the hot solvent or soluble in the cool solvent.

There must be no interaction of the drug or solvent. The solvent's boiling point needs to be lower than the compound's melting point. The purified substance shouldn't react with a good recrystallization solvent; instead, it should dissolve somewhat at high temperatures and significantly at low temperatures.

Learn more about solvents at

https://brainly.com/question/30546006

#SPJ4

The compound's molar mass is expressed in gram per mole, or g/mol.

One mole of a specific chemical or material has a mass of 1 molar. The compound's molar mass in the unit called gram per mole, or g/mol.

Avoid mixing up the terms molecular weight and molar mass of the material. The two are not equivalent. The atomic weight of each atom in a particular molecule adds up to make up the compound's mass, while the molar mass is the result of multiplying the molecule's weight by the number of moles in the compound.

To know more about molar mass, visit,

https://brainly.com/question/30459969#:~:text=Expert%2DVerified%20Answer&text=Molar%20mass%20is%20the%20mass,grams%20of%20pure%20carbon%2D12.

#SPJ4

The unit conversion helps to calculate the one mole quantity in milimoles. It will contain thousands of milimoles.

A mole is the amount of a substance of a system that contains as many elementary entities as there are atoms in 0.012 kilograms of carbon 12; its symbol is "mole." The SI prefix "mili" represents a factor of 10⁻³ or, in exponential notation, 1E⁻³. So 1 millimole = 10⁻³ moles. Both are different units of the same quantity. A unit conversion used to express the same property as other units of measurement. A conversion factor, which is a number, is used to convert a quantity from one unit to another. The conversion formula for converting millimoles to 1 mole is written as : millimole = moles / 1000

This means that one millimole contains 10⁻³ moles. Therefore, one mole contains 1000 millimoles.

For more information about unit conversion, visit :

https://brainly.com/question/13016491

#SPJ4

To find the mass of copper oxide that reacted, the student could follow these steps given in the explanations.

Learn more on methods to find mass here: https://brainly.com/question/29791625

#SPJ1

Answer: Energy can be classified as one of these types potential energy, kinetic energy, and chemical energy

A number of electrical devices operate on the basis of law of conservation of energy. Energy can be changed from gas form to other. In a torch it is the chemical energy which is converted into heat and light energy. The correct option is B.

The law of conservation of energy states that the energy can neither be created nor be destroyed. Although it can be transformed from one form to another. The total energy of an isolated system always remains constant. All forms of energy follow the law of conservation of energy.

In a closed system which is defined as a system that is isolated from its surroundings, the total energy of the system is conserved. So in an isolated system like universe, if there is a loss of energy then there must be a gain of an equal amount of energy.

Although this principle cannot be proved.

Thus the correct option is B.

To know more about law of conservation of energy, visit;

https://brainly.com/question/29775341

#SPJ2

Blue = orange/yellow light (wavelengths around 450-500 nm) is absorbed by the solution that appears blue.

Red = green light (wavelengths around 550-600 nm) is absorbed by the solution that appears red.

Orange = blue light (wavelengths around 450-500 nm) is absorbed by the solution that appears orange.

Green = red light (wavelengths around 650-700 nm) is absorbed by the solution that appears green.

Give a short note on absorption.

Color absorption takes place because substances selectively absorb certain wavelengths of visible light, while transmitting or reflecting others. The color that we perceive is the result of the wavelengths of light that are not absorbed, but rather transmitted or reflected, and detected by our eyes. This phenomenon is commonly used in colorimetric analysis and can provide important information about the electronic structure and composition of a substance.

Hence, the answer is,

Blue = orange/yellow light

Red = green light

Orange = blue light

Green = red light

To learn more about absorption, follow the link:

https://brainly.com/question/24228588

#SPJ4

The generic name of the ativan is the Lorazepam .

The Ativan, also called as by the generic name that is lorazepam, it is a type of the medication called as the benzodiazepine. The Benzodiazepines is helps by the increasing the activity of the neurotransmitter called as the GABA in the brain, that helps to reduce the anxiety and the it promote relaxation.

The intravenous form of the lorazepam is used to treat the seizures.  The Lorazepam is in the class of the drugs called as the benzodiazepines. The Ativan is the benzodiazepine that is used to treat the the depression.

To learn more about ativan here

https://brainly.com/question/30397644

#SPJ4

Here's a table that classifies the objects based on their physical properties:

Object            Property

Rubber bands   Elasticity

Wood chips    Hardness

Straight pins    Sharpness

Aluminum foil    Malleability

Glass beads   Smoothness

Physical properties are characteristics that describe the basic nature of an object, such as its shape, size, texture, and other observable features, without reference to its composition.

The physical properties listed in the table are just a few examples of the ways in which these objects can be described and classified based on their physical characteristics.

Learn more about Physical properties at:

https://brainly.com/question/11445521

#SPJ1

To dilute the 0.200 M HCl solution to 0.150 M solution, 166.67 mL of water is needed to be added to the solution.

To dilute a solution, we can use the dilution equation:

M₁V₁ = M₂V₂

where M₁ and V₁ are the initial molarity and volume of the solution, and M₂ and V₂ are the final molarity and volume of the solution after dilution.

In this case, we are given M₁ = 0.200 M, V₁ = 500 mL, and M₂ = 0.150 M. We need to solve for V₂ to find the final volume of the solution after dilution, and then subtract V₁ from V₂ to find the amount of water that needs to be added.

0.200 M × 500 mL = 0.150 M × V₂

V₂ = (0.200 M × 500 mL) / 0.150 M

V₂ = 666.67 mL

So, the final volume of the solution after dilution should be 666.67 mL.

To find the amount of water that needs to be added, we can subtract the initial volume from the final volume:

666.67 mL - 500 mL = 166.67 mL

Therefore, we need to add 166.67 mL of water to the 500 mL of 0.200 M HCl solution to dilute it to a 0.150 M solution.

Learn more about dilution here: https://brainly.com/question/24881505.

#SPJ11

a.) heterogeneous catalysis b.) heterogeneous catalysis c.) heterogeneous catalysis d.) homogeneous catalysis e.) homogeneous catalysis.

Catalysis is a word used to describe a process in which the presence of such substance (the catalyst) that isn't consumed during in the reaction and must be removed later if it is not to be an impurity in the finished product influences the rate and/or outcome of the reaction.

a. The reaction of carbon monoxide and oxygen in the presence of platinum is an example of heterogeneous catalysis.

b. The reaction of sulfur dioxide and oxygen over vanadium oxide is an example of heterogeneous catalysis.

c. The synthesis of ammonia gas from nitrogen and hydrogen in the presence of potassium oxide is an example of heterogeneous catalysis.

d. The reaction of persulfate ions and iodide ions in water in the presence of iron (II) ions is an example of homogeneous catalysis.

e. The reaction of 2,3-dihydroxybutanedioate ions and hydrogen peroxide in the presence of cobalt (II) ions is an example of homogeneous catalysis.

To know more about catalysis visit :

https://brainly.com/question/27950063

#SPJ1

1) The theoretical yield is 18.02 g

2) The percent yield is 67%

3) The percent yield is  55.8 %

The balanced reaction equation is;

N2 + 3H2 ----> 2NH3

Number of moles of N2 = 15g/28 g/mol = 0.53 moles

If 1 moles of N2 produced 2 moles of NH3

0.53 moles of N2 will produce 0.53 * 2/1

= 1.06 moles

Theoretical yield = 1.06 moles * 17 g/mol

= 18.02 g

The percent yield = 12.1/18.02 * 100/1

= 67%

The percent yield = 19.8 g/35.5 g * 100/1

= 55.8 % as shown

Learn more about theoretical yield:https://brainly.com/question/14966377

#SPJ1

The 1.375 g sample of sugar found seaweed, is burned completely in oxygen to give 1.993 g of carbon dioxide and 0.9519 g of water . The empirical formula of this sugar  is C₃H₇O₃.

Moles of the C in the carbon dioxide = 1 ( 1.933/ 44)

Moles of the  C in the carbon dioxide = 0.0453 mol

Moles of the H in the water = 2 ( 0.9519 / 18 )

Moles of the H in the water = 0.106 mol

Mass of the oxygen = 1.375 - (0.0453 ×12 ) - 0.016 × 1

Mass of the oxygen = 0.724 g

The moles of the oxygen = mass / molar mass

                                          = 0.724 / 160

                                           = 0.0453 mol

Dividing by the smallest one , we get :

C = 1

H = 2.3

O = 1

Multiplying by three , we get :

The empirical formula is C₃H₇O₃.

To learn more about empirical formula here

https://brainly.com/question/14044066

#SPJ4

The bonds connecting adjacent nucleotides in a nucleic acid is called phosphodiester bond.

The phosphodiester bond is the connection between two nucleotides that follow one another within the same DNA strand. Deoxyribose in DNA and ribose in RNA form the phosphodiester bond, which connects the 3' carbon atom of one sugar molecule to the 5' carbon atom of another.

The 3', 5' phosphodiester linkage is specifically formed by the phosphodiester connection between the 3' carbon atom of one sugar molecule and the 5' carbon atom of another. These saccharide groups come from ribose and deoxyribose, which are found in both DNA and RNA.

Within each strand, the nucleotides are joined by covalent bonds.

To know about nucleotide

https://brainly.com/question/967810

#SPJ4

Rabbits eat vegetative cover, which has caused a decreased amount of food available for grazing livestock, Their tax dollars have been used to try to control the rabbit population are all ways by which Australians are affected by rabbits in Australia.

Rabbits were introduced to Australia by European settlers in the mid-19th century for hunting and as pets. However, their populations soon spiraled out of control, and they have since become a major environmental and agricultural pest in Australia.

The overpopulation of rabbits has caused extensive damage to Australia's native vegetation, leading to soil erosion, loss of habitats for native species, and altered ecosystems. This has had a significant impact on the environment, with many native species struggling to survive.

Learn about rabbit control here https://brainly.com/question/6864862

#SPJ1

The Ser is an amino acid that participates in the chymotrypsin mechanism's nucleophilic assault.

To learn more about amino acid refer to:

https://brainly.com/question/24106148

#SPJ4

Heat capacity is an extensive property because its value depends on the quantity of the material present. The energy absorbed by water is 20,900 J .

The specific heat capacity of a substance is defined as the amount of heat required to raise the temperature of 1 gram of the substance through 1°C.

The heat required to raise the temperature of a sample of mass 'm' having specific heat 'c' from T₁ to T₂ is given as:

q = mc (T₂ - T₁)

200.0 × 4.18 (45.1 - 20.1)

q = 20,900 J

Thus the water absorbs 20,900 J of energy.

To know more about specific heat capacity, visit;

https://brainly.com/question/29766819

#SPJ1

Answer:

20950

Explanation:

The amount of energy absorbed by water can be calculated using the formula:

q = m * c * ΔT

where q is the energy absorbed (in Joules), m is the mass of water (in grams), c is the specific heat of water (in Joules/gram °C), and ΔT is the change in temperature (in °C).

In this case, we have:

m = 200.0 g

c = 4.18 J/g°C

ΔT = 45.1°C - 20.1°C = 25.0°C

Therefore, the amount of energy absorbed by the water is:

q = 200.0 g * 4.18 J/g°C * 25.0°C

= 20,950 J

So the water in this experiment absorbed 20,950 Joules of energy