How does acid react to water mixed with clorine eyedrops

The ammonium ion is formed when ammonia accepts a proton from an acid.

The term conjugate acid  refers to a specie that is formed when a base accepts a proton. The conjugate acid of ammonia is the ammonium ion.

This is because, the ammonium ion is formed when ammonia accepts a proton from an acid.

Learn more about conjugate acid: https://brainly.com/question/12883745

Answer:

B) Gamma

Explanation:

Gamma is by far the most powerful, and only one that can produce this much energy

option c is your answer.

Answer:

An acidic oxide reacts with water and produces acid. They are also called acid anhydride, which are oxides that react with water to form an acid, or with a base to form a salt. They are oxides of either nonmetal or of metals in high oxidation states. An oxide is a binary compound that we obtain upon the reaction of oxygen with other elements. Their chemistry can be systematically understood by taking an oxoacid and removing water from it until only an oxide remains. The resulting oxide belongs to this group of substances. Usually, it is the oxide of non-metals. For example, sulfurous acid (SO2), sulfuric acid (SO3), and carbonic acid (CO2) are acidic oxides. Thus, CO2 dissolves in water to give carbonic acid, and NO2 gives a mixture of nitrous and nitric acids. An inorganic anhydride (a somewhat archaic term) is an acid anhydride without an organic moiety.

Explanation:

Answer:

D) The Graph line’s general trend is increasing from left to right.

Explanation:

N2, a product, will increase over time which means the line of the graph would go up over time. Time increases from left to right so the correct answer is D.

The graph that describes the reaction will have a trend in which the graph is decreasing from left to right.

A collision occurs when two particle bump into each other. We know that a reaction takes place when there is an effective collision between the reacting particles.

In this case, the graph that describes the reaction will have a trend in which the graph is decreasing from left to right.

Learn more about reaction:https://brainly.com/question/13110055?

#SPJ2

Answer:

this would be true friend :)

Explanation:

for density, it generally goes solids, liquids, then gas in order from most dense, to least dense.

please rate and mark as brainlest.

Answer:

Animals also contribute to mechanical weathering. Digging animals such as moles break apart rocks underground, while the movement of animals on surface rock can scratch the rock's surface or exert pressure that causes the rock to crack.

Explanation:

pls brainlist me, correct me if I'm wrong

Answer:

Carbohydrates

Explanation:

first of all, I took a quiz and got it right but also Carbohydrates fuel the body and are broken down and made into glucose that can be absorbed into the bloodstream. so when absorbed into the bloodstream they travel in the blood to the body's cells where they are used for respiration.

The genotypes are not found in the question, but p and q can be used to calculate genotypic frequencies by using the equation p2 + 2pq + q2 = 1.

The Hardy–Weinberg principle is a model used in population genetics to estimate allele and genotypic frequencies in a population.

According to the Hardy–Weinberg principle, the sum of p + q is equal to 1, where p and q represent the dominant and recessive alleles, respectively.

The Hardy–Weinberg principle considers the absence of different evolutionary forces acting on the population.

Learn more about Hardy–Weinberg principle here:

https://brainly.com/question/3406634

The formula for calculating the probability of an offspring from a population having each of the following genotypes is p2 + 2pq + q2 = 1.

The number of people with a particular genotype divided by the total number of people in a population is known as genotype frequency.

p2 + 2pq + q2 = 1 is the Hardy Weinberg equation.

Thus, the formula for calculating the probability of an offspring from a population having each of the following genotypes is p2 + 2pq + q2 = 1.

Learn more about genotypic frequency

https://brainly.com/question/14214400

#SPJ4

Answer:

[tex]\huge\boxed{\sf T = 682.4 \ K}[/tex]

Explanation:

Given Data:

Mole = n = 0.1 mol

Pressure = P = 530 mmHg = 0.7 atm

Volume = v = 8 L

Ideal gas constant = R = 0.8206 L atm K⁻¹ mol⁻¹

Required:

Temperature = T = ?

Formula:

Pv = nRT

Solution:

Rearranging for T

     [tex]\displaystyle T = \frac{Pv}{nR} \\\\T = \frac{(0.7)(8)}{(0.1)(0.08206)} \\\\T = \frac{5.6}{0.008206} \\\\T = 682.4 \ K\\\\\rule[225]{225}{2}[/tex]

Answer:

yh correct answer is A

Explanation:

the reason is because

Percentage yield tells the percentage ratio of actual to theoretical yield. The theoretical yield of iron(III) sulfate is 26.52 g.

The theoretical yield is the product formation from the complete modification of the limiting reagent in a chemical reaction.

The balanced chemical reaction is shown as,

[tex]\rm 2FePO_{4} + 3Na_{2}SO_{4} \rightarrow Fe_{2}(SO_{4})_{3} + 2Na_{3}PO_{4}[/tex]

Moles of ferric phosphate is calculated  as:

[tex]\begin{aligned} \rm n &= \rm \dfrac{mass}{molar \; mass}\\\\&= \dfrac{20}{150.82}\\\\&= 0.1326\;\rm mol\end{aligned}[/tex]

From the reaction,

[tex]\dfrac{1 \;\rm mol \; Fe_{2}(SO_{4})_{3} }{2 \;\rm mol \; FePO_{4}}&= \dfrac{\rm X}{ 0.1326 \;\rm mol \; FePO_{4}}[/tex]

Solving for X:

[tex]\begin{aligned} \rm X &= (\dfrac{0.1326}{2}) \times 1 \rm \; mol\\\\&= 0.0663 \;\rm mol \;Fe_{2}(SO_{4})_{3}\end{aligned}[/tex]

Calculating mass from moles:

[tex]\begin{aligned}\rm mass &= \rm moles \times molar \rm \; mass\\\\&= 0.0663 \;\rm mol \times 399.88 \;\rm g/mol \\\\&= 26.51\;\rm g\end{aligned}[/tex]

Therefore, option A. 26.52 gm is the mass of iron(III) sulfate.

Learn more about theoretical yield here:

https://brainly.com/question/8575227

Answer:

A) 26.52

Explanation:

Answer:

hydrochloric acid (HCl)

Explanation:

balanced equation: Ca(OH)2+2HCl -> CaCl2+2H2O

85.0/36=2.33 mol HCl

120/74=1.62 Ca(OH)2

2.33 mol HCl x 1 mol CaCl2/2 mol HCl = 1.165 mol CaCl2

1.62 mol Ca(OH)2 x 2 mol CaCl2/1 mol Ca(OH)2 = 3.24 mol CaCl2

Answer:

The actual reaction to make water is a bit more complicated: 2H2 + O2 = 2H2O + Energy. In English, the equation says: To produce two molecules of water (H2O), two molecules of diatomic hydrogen (H2) must be combined with one molecule of diatomic oxygen (O2). Energy will be released in the process.

Explanation:

Answer:

60w x 24 = 1440wh per day

1440 x 60 = 86400 WATTS HOUR FOR 60 DAYS

Explanation:

In short.

86400/1000 = 86.4kwh

brainiest me :> THANK YOU!

Answer:

86.4kwh

Explanation:

Answer:

[tex]\sf\large\underline\purple{Fractional\: Distillation:-}[/tex]

[tex]\rightarrow[/tex]The process involves repeated distillations and condensations and the mixture is usually separated into component parts. The separation happens when the mixture is heated at a certain temperature where fractions of the mixture start to vaporize.

[tex]\rightarrow[/tex]The basic principle of this type of distillation is that different liquids boil and evaporate at different temperatures. So when the mixture is heated, the substance with lower boiling point starts to boil first and convert into vapours.

[tex]\sf\underline\green{Applications\: Of\:Fractional\: Distillation:-}[/tex]

________________________________

Hope it helps you:)

the solution is an alkali

The hydroxide ion concentration of an aqueous solution with a ph of 3. 45 is  10⁻³·⁴⁵

PH is potential hydrogen. It helps in to determine the acidity and basicity of any solution.

To get the hydroxide ion concentration of an aqueous solution, the following formula will be used.

[tex]pH = -log^[^H^+^]\\pH=-log^[^H^3^O^+^]\\\\-log [^H^3^O^+^] - pH\\ 10 ^-pH = [H3O^+] \\\\H3O^+ = 10^-^3^.^4^5[/tex]

Thus, the hydroxide ion concentration is 10⁻³·⁴⁵

Learn more about pH

https://brainly.com/question/15289741

#SPJ4

The mass of  potassium chlorate, KClO₃ needed to produce 30 grams of potassium chloride, KCl is 49.33 grams

2KClO₃ —> 2KCl + 3O₂

Molar mass of KClO₃ = 39 + 35.5 + (16×3) = 122.5 g/mol

Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g

Molar mass of Kcl= 39 + 35.5 = 74.5 g/mol

Mass of KCl from the balanced equation = 2 × 74.5 = 149 g

SUMMARY

From the balanced equation above,

149 g of KCl were obtained from 245 g of KClO₃

From the balanced equation above,

149 g of KCl were obtained from 245 g of KClO₃

Therefore,

30 g of KCl will be obtained from = (30 × 245) / 149 = 49.33 g of KClO₃

Thus, 49.33 g of KClO₃ are needed for the reaction

Learn more about stoichiometry:

https://brainly.com/question/14735801

Answer:

To determine whether a given single replacement will occur, you must use an “Activity Series” table. If the metal or the halogen is above the element it will replace based on the activity series, a single displacement reaction will occur. The video below summarizes an experiment conducted to compare the activities of three metals ( Mg, Cu and Zn ).

Explanation:

Single replacement reaction will occur if any more active specie will add on the solution.

Single displacement reactions are those reactions in which one element from the given molecule is displaced by some other element.

Generally displacement reactions are shown by metals when more reactive metal is added in the solution of any another metal. Then more reactive metal displaces the metal which is already present in the solution and reaction is taking place is shown by changing in color.

Hence single displacement reaction will occur when more reactive metal is added in any solution.

To know more about single displacemen reaction, visit the below link:

https://brainly.com/question/13328989

#SPJ4

Answer:

208.8018 g/Mol you conver the answer by weight and moles

The temperature change that indicates an increase in the average kinetic energy of the molecules in a sample is 255 K to 0°C.

Chemical reactions occur when particles of reactants react or collide with one another, hence, when particles collide faster, reaction also occurs faster.

One of the ways to make reactions occur faster i.e. increasing the average kinetic energy is by increasing the temperature.

The example that depicts an increase in temperature is 255K to 0°C, which is equivalent to 255K to 273K.

Therefore, the temperature change that indicates an increase in the average kinetic energy of the molecules in a sample is 255 K to 0°C.

Learn more about temperature at: https://brainly.com/question/15267055

Species that have a lone pair of electrons often donate electrons by resonance while substituents that are electron deficient take away electrons by resonance.

The term resonace has to do with the movement of electron pairs in a molecule. Inductive effects has to do with the drawing of electron density towards an atom or bond.

The two effects depends on the nature of a substituent. For instance, species that have a lone pair of electrons often donate electrons by resonance while substituents that are electron deficient take away electrons by resonance.

The question is incomplete hence the exact nature of the substituents can not be determined.

Learn more about resonance: https://brainly.com/question/23287285?

In resonance, the species with lone pairs donate electrons while the substituent takes electrons away from another species when deficient by resonance.

When the electron donor or the withdrawal groups creates the electron density on the molecule then it is called the inductive effect. This results in the creation of permanent dipoles in the bonds of the molecules.

Atom attached to a benzene molecule with higher electronegativity than hydrogen atom then, it will be an acceptor while with lower electronegativity will be a donor.

The movement of the electron pair like lone pair and pi bond in a molecule by the delocalization is called the resonance effect. The electron donation and acceptance depend on the nature of the substituent molecule.

If the atom attached to the benzene molecule is electron-rich, it will be a donor, while the electron-deficient will accept the electron by the method of resonance effect.

Therefore, the nature of the substituent determines the resonance and the inductive effect.

Learn more about inductive and resonance effects here:

https://brainly.com/question/21306067

#SPJ4

If the pH of the solution is 2.00. it follows that the pOH of the solution is 12.

The term pH refers to the hydrogen ion concentration of the solution. It shows the degree of acidity in the solution. We also know that the pOH can be obtained from the pH using; pOH = 14-pH.

Hence, if the pH of the solution is 2.00. it follows that the pOH of the solution is 12.

Learn more about pH: https://brainly.com/question/15289741

The equilibrium for the dissolution of the weak base is ;(CH3)2NH(aq) + H2O(l) ⇄ (CH3)2NH3^+(aq) + OH^-(aq)

A weak base is one that does not ionize completely in solution. As such, a weak base will have a very low base dissociation constant Kb reflecting its minimal dissociation in solution.

The question is incomplete hence we are are unable to work out the equilibrium but in solution it will look like this;

(CH3)2NH(aq) + H2O(l) ⇄ (CH3)2NH3^+(aq) + OH^-(aq)

Learn more about weak base: https://brainly.com/question/4131966

The equilibrium for the reaction between (Ch₃)2NH of the weak base is (CH₃)2NH(aq) + H₂O(l) ⇄ (CH₃)2NH₃⁺(aq) + OH⁻(aq).

A weak base is one that does not completely dissociate in water.

It leaves only a small proportion of hydroxide ions and the concerned basic radical in the resulting aqueous solution.

A large proportion of dissociated base molecules.

Thus, the equilibrium for the reaction is (CH₃)2NH(aq) + H₂O(l) ⇄ (CH₃)2NH₃⁺(aq) + OH⁻(aq).

Learn more about weak bases

https://brainly.com/question/19340043

#SPJ4

Answer:

mf i was trying to

find out the same thing

Explanation:

Based on the dissolution equation of BaSO4, the solubility product, Ksp, expression of BaSO4 is: [Ba^{2+}] × [SO4^{2-}]

The solubility product, Ksp, of a substance is an equilibrium constant which expresses the product of the concentration of ions produced by a solute.

The solubility of a solute depends on temperature, thus solubility product also depends on temperature.

The balanced equation for the dissolution of barium sulfate is given below:

The solubility product for barium sulfate is given as;

Ksp = [Ba^{2+}] × [SO4^{2-}]

Therefore, the solubility product, Ksp, expression of BaSO4 is: [Ba^{2+}] × [SO4^{2-}]

Learn more about solubility product at: https://brainly.com/question/26405952

Hey there!

C. Candle

Explanation:

Answer. High-density polyethylene or HDPE is a thermoplastic polymer used in the production of plastic bottles, containers, corrosion-resistant pipes, etc. and not used for the production of candles. Commercially available candles are made with paraffin wax.

Answer: B aka #2

Explanation:

The Chemical equation for this reaction is F[tex]_2[/tex](g) + Ca(s) → CaF[tex]_2[/tex]. Therefore, the correct option is option B.

Chemical equations are symbols or chemical formulas that depict a chemical reaction symbolically. With a plus sign separating the entities in the reactants and products, the reactant objects are listed on the left as well as the product objects are listed on the right.

The critical values of a stoichiometric values are shown as coefficients alongside the symbols or formulas of the various entities. Fluorine gas is placed in contact with calcium metal at high temperatures to produce calcium fluoride powder. The formula equation for this reaction is

F[tex]_2[/tex](g) + Ca(s) → CaF[tex]_2[/tex]

Therefore, the correct option is option B.

To know more about chemical equation, here:

https://brainly.com/question/19626681

#SPJ7

Answer:

Zone A

Explanation:

Because, when facing the sun, the "A" zones would be furthest from the sun, they get the least amount of sunlight (also shows why they are the coldest parts).

The molecular formula of the compound that has a percent composition of 38.7% carbon, 9.76% hydrogen, 51.5% oxygen is C2H6O2.

The molecular formula can be calculated from the empirical formula. The empirical formula of the compound is calculated as follows:

Next, we convert the mass to moles by dividing by their atomic mass:

Next, we divide by the smallest (3.22)

Hence, the empirical formula of the compound is CH3O

If the molar mass of the compound is 62g/mol;

(CH3O)n = 62

31n = 62

n = 2

(CH3O)2 = C2H6O2

Therefore, the molecular formula of the compound that has a percent composition of 38.7% carbon, 9.76% hydrogen, 51.5% oxygen is C2H6O2.

Learn more about molecular formula at: https://brainly.com/question/14425592