How do you think you results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4

Answer:

=0.15M

Explanation:

To get the moles of the unknown LiOH, calculate the number of moles of HCl in 12.3mL.

Using the stoichiometric coefficient, mole ratio 1:1.

This means that the number of moles is the same. This number of moles is contained in 18mL. Then Calculate the molarity (concentration) which is in 1000mL

See the explanation from the image I have shared with you for calculations.

Answer:

5 kg of feather

Explanation:

Answer: A mass of 124457.96 g ammonia is produced by reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.

Explanation:

Given: Volume = 450 L

Temperature = 450 K

Pressure = 300 atm

Using ideal gas equation, moles of nitrogen are calculated as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = tempertaure

Substitute values into the above formula as follows.

[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{135000}{36.945}\\= 3654.08 mol[/tex]

According to the given equation, 1 mole of nitrogen forms 2 moles of ammonia. So, moles of ammonia formed by 3654.08 moles of nitrogen is as follows.

[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]

As moles is the mass of substance divided by its molar mass. So, mass of ammonia (molar mass = 17.03 g/mol) is as follows.

[tex]Moles = \frac{mass}{molar mass}\\7308.16 = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]

Thus, we can conclude that a mass of 124457.96 g ammonia is produced by reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.

Answer:

D. 450 J/kgK

Explanation:

Using the formula as follows:

Q = m × c × ∆T

Where:

Q = amount of heat absorbed/released (J)

m = mass of substance (g)

c = specific heat capacity

∆T = change in temperature (°C)

According to the information provided in this question:

Q = 267.3 kJ = 267300J

m = 18kg

∆T = 318K - 285K = 33K

c = ?

Q = m × c × ∆T

c = Q ÷ m∆T

c = 267300 ÷ 18 × 33

c = 267300 ÷ 594

c = 450 J/kgK

Answer:

λ = 2.38 × 10^(-7) m

Explanation:

We are given the work function for palladium as 503.7 kJ/mol.

Now let's convert this to KJ/electron.

We know from avogadro's number that;

1 mole of electron = 6.022 × 10^(23) electrons

Thus,

503.7 kJ/mol = 503.7 × 1/(6.022 × 10^(23)) = 8.364 × 10^(-22) KJ/electron = 8.364 × 10^(-19) J/electron

Formula for energy of a photon is;

E = hv

Where;

h is Planck's constant = 6.626 × 10^(-34) J.s

v is velocity

Now, v = c/λ

Where;

c is speed of light = 3 × 10^(8) m/s

λ is wavelength of light.

Thus;

E = hc/λ

Making λ the subject, we have;

λ = hc/E

λ = (6.626 × 10^(-34) × 3 × 10^(8))/(8.364 × 10^(-19))

λ = 2.38 × 10^(-7) m

Answer:

7.827s

Explanation:

Given that

Height of the Eiffel tower is (h) =300.5m

Acceleration due to gravity (g) =9.81m/s2

From the kinematic equations

s =ut+(1/2)gt2

It is free fall then u =0

Then h =(1/2)gt2

Then the time taken for the croissant dropped before it tagged you on the head. is t =Sqrt(2h/g) =Sqrt(2*300.5/9.81)=7.827s

Answer:

Increased surface area - finely divided solute

like dissolves like - matching polarity

temperature - rate proportional to kinetic energy

stirring spreads - solute throughout solution

Answer:

Answer to the following question is as follows;

Explanation:

A millilitre is equal to the volume of a cube with 1 cm on each side. As a result, one millilitre equals one cubic centimetre. There are 1000 mL in a litre, that is the same as 1000 cm3 in a square metre.

1 ml = 1 cm³

1000 ml = 1 liter

Answer:

Ca + Pb(NO3)2 → Pb + Ca(NO3)2

Explanation:

This is an oxidation-reduction (redox) reaction:

PbII + 2 e- → Pb0

(reduction)

Ca0 - 2 e- → CaII

(oxidation)

Pb(NO3)2 is an oxidizing agent, Ca is a reducing agent.

Answer:

sry I don't know the answer

Answer:

use this formula it will help u .

Explanation:

If 60 ml of ethanol is diluted to a final volume of 400 ml, you create a 35 % ethanol solution.

First, realize that you creating a solution with that contains a polar solute (ethanol) with a polar solvent (water). Remember that "like dissolves like."

If you pour 60 ml of ethanol in a volumetric flask, you add 340 ml of water to dilute this solution to a final volume of 400 ml.

Volumetric flasks are designed to make or dilute solutions to specified final volume.

Since you have 60 ml of ethanol in a total solution of 400 ml, the percentage of ethanol is 35 %.

This result is obtained in the following manner.

ml/400. ml. = .35

.35 x 100% = 35 %

19. place moth balls in the closet and observe after several days.

20. whenever wax or a candle burns it turns from solid to liquid but again at room temperature it turns to solid

21. evaporation, condensation, precipitation

22. it produces new substances

23. vinegar Bubbles when baking soda is added

24. steam

Answer:

name a food that contain an acid

1. nuts

2. dairy

3. grains

3. meat

these are the foods which contains acids.

hope its helps you

have a great day keep smiling be happy stay safe.

Answer:

huh what?

Explanation:

Is  196,96657  u

I hope I've helped :)

Answer:

Physics is the branch of science that deals with the structure of matter and how the fundamental constituents of the universe interact. It studies objects ranging from the very small using quantum mechanics to the entire universe using general relativity.

Answer:

the reaction is spontaneous

Answer:

Both aldehydes and ketones contain a carbonyl group a functional group with a carbon oxygen double bond, hence the carbonyl in aldehydes and ketones forms sp²hybridization.

Explanation:

The structure of carbonyl group is -C=O-

The hybridization of carbon can be identified by couting the number of surrounding atoms.

In carbonyl compounds, carbon is directly bonded with three atoms.

One is oxygen, and the other two are other carbons.

With oxygen carbon has a double bond.

Hence, this three corresponds to sp2 hybridization.

Thus, the given statement is correct.

Answer: THERMAL ENERGY

Explanation: thermal is also known as heat and the body contains more of heat

hope it helps

Answer: lysocline

Explanation:

Lysocline is the depth in the ocean at which calcareous skeletal material first begins to dissolve. It is the depth of the ocean whereby the dissolution rate of calcite has a dramatic rise.

Lysocline is also referred to as the transition zone upper bound where the CaCO3 content drops.

Answer:

80 m/s.

Explanation:

NOTE: This is a physics question. However, the solution to the question given below:

From the question given above, the following data were obtained:

Acceleration (a) = 2 m/s²

Initial velocity (u) = 20 m/s

Time (t) = 30 s

Final velocity (v) =?

The final velocity of the train can be obtained as shown below:

v = u + at

v = 20 + (2 × 30)

v = 20 + 60

v = 80 m/s

Therefore, the final velocity of train is 80 m/s.

Answer; a) Covalent compound are formed when atoms of different molecules share electrons in order to be stable either by losing or gaining electrons

eg.. HCL hydrogen chloride , a chlorine atom has 7 electrons on its outer shell and hydrogen has 1 so when this two pair they become covalently bonded. chlorine shares one electron with the hydrogen atom ,thus to say both now have a stable arrangement of electron in their outer shell.

methane CH4 the carbon atom has 4 electrons and hydrogen has 1 so carbon would need 4 more and hydrogen would need 1 more so carbon pairs with 4 hydrogen atoms making it 8 and hydrogen 2 so they now have a stable arrangement ,thus the carbon atom shares with 4 hydrogen atoms.

b) some physical properties are

i)they have low melting and boiling points

ii)their insolubility in water

iii) they are non conductors of electricity

c) an experiment using their melting and boiling point

EXPERIMENT; lets use the covalent molecule carbon monoxide CO

when you apply heat and it tend to melt at a -199 degree celsius then it is a covalent molecule

and when it starts to boil at -191 degree celsuis then its sure a carbon monoxide covalent molecule

explanation; the reason for its low melting point and boiling point is because the attraction between the molecule is very low so it doesn't need much energy to break up the lattice between them.

HOPE THIS HELP if you need more explanation feel free to comment in the comment section

Answer:

0.241 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

HBr + NaOH —> NaBr + H₂O

From the balanced equation above,

The mole ratio of acid, HBr (nₐ) = 1

The mole ratio of base, NaOH (n₆) = 1

Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:

Volume of base, NaOH (V₆) = 20 mL

Volume of acid, HBr (Vₐ) = 24.1 mL

Concentration of acid, HBr (Cₐ) = 0.2 M

Concentration of base, NaOH (C₆) =?

CₐVₐ / C₆V₆ = nₐ/n₆

0.2 × 24.1 / C₆ × 20 = 1/1

4.82 / C₆ × 20 = 1

Cross multiply

C₆ × 20 = 4.82

Divide both side by 20

C₆ = 4.82 / 20

C₆ = 0.241 M

Therefore, the concentration of the NaOH solution is 0.241 M

Answer: Dont let the water get inside your private area because it can lead to you washing out the healthy bacteria in your private area !

Explanation:

Also dont do it because you dont know if your water is clean enough for that ..

D. The empirical formula and the molar mass

Answer:

Los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).

Explanation:

El cobre posee dos estados de oxidación más comunes, los cuales son +1 y +2.

En contacto con aire el cobre se puede oxidar para dar lugar al óxido cuproso u óxido de cobre (I):

4Cu + O₂ → 2Cu₂O

Dicha oxidación también puede dar lugar a la formación del óxido cúprico u óxido de cobre (II):

2Cu + O₂ → 2CuO

La formación del óxido cúprico se favorece a temperaturas mayores a la del ambiente (por encima de los 300 °C).

Por lo tanto, los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).  

Espero que te sea de utlidad!

Answer:

D

Explanation:

The first ionization energy is the minimum energy required to remove the most loosely bound electron from an atom.

Good luck!

Answer:

The higher its electronegativity, the more an element attracts electrons.

Explanation:

Electronegativity is a property that describes the tendency of an atom to attract electrons (or electron density) toward itself. An atom's electronegativity is affected by both its atomic number and the size of the atom.

Answer:

Electric current

Hydrogen and oxygen gas

Explanation:

Electrolysis is defined as a method of separation whereby an electric current is introduced into compounds to separate them . The electric current used here is a direct electric current (DC) and it makes the compound to be spit into its' component elements.

Now, in the case of water like it says in the question. Water is a mixture of hydrogen and oxygen gas. Thus, when electric current is passed through water which has an Electrolyte, it makes the water to decompose into its compound elements which are hydrogen and oxygen.

Answer:

more

Explanation:

seems like you did not finish the questions