How did the current change when the circuit was initially closed in Part 2 of this exercise? Explain your answer by referencing Panel 1 and the definitions of a capacitor and of current.

Answer:

In coin card experiment smooth card is used so that the card can slide easily from glass

Answer:

. The SI unit of volume is the cubic meter (m3), which is a derived unit.

Liter (L) is a special name for the cubic decimeter (dm3).

Answer:

0.0366 m

Explanation:

We are given;

Current density; J = 540 A/cm² = 540 × 10⁴ m

Current; I = 0.57 A

Now, formula for current density is;

J = I/A

Where A is area = πr²

Thus;

J = I/(πr²)

r = √(I/(Jπ))

r = √(0.57/(540π))

r = 0.0183 m

Diameter = 2 × radius

Diameter = 2 × 0.0183

Diameter = 0.0366 m

Answer:

the tension of the rope is 34.95 N

Explanation:

Given;

length of the rope, L = 3 m

mass of the rope, m = 0.105 kg

frequency of the wave, f = 40 Hz

wavelength of the wave, λ = 0.79 m

Let the tension of the rope = T

The speed of the wave is given as;

[tex]v = f\lambda = \sqrt{\frac{T}{\mu} } \\\\where;\\\\\mu \ is \ mass \ per \ unit \ length\\\\\mu = \frac{0.105}{3} = 0.035 \ kg/m\\\\v = f\lambda = 40 \times 0.79 = 31.6 \ m/s\\\\v = \sqrt{\frac{T}{\mu} } \\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu\\\\T = (31.6^2)(0.035)\\\\T = 34.95 \ N[/tex]

Therefore, the tension of the rope is 34.95 N

Answer:

t=1/4v1

Explanation:

Given data

Car one

Speed =v1

Time =t

Distance =1/4 mile

Given data

Car two

Speed =v1/2

Time =t

Distance =d

Speed =distance/time

v1=1/4/t

v1t=1/4

t=1/4*1/v1

t=1/4v1 seconds

Answer:

There are four main types of earthquake waves:

HOPE IT HELPS!!

Answer:

Explanation:

The cell is acting like a shell .

Capacity of a shell is given by the following expression.

C= 4πk ε₀ x ab / (b-a )

k is dielectric constant , b and a are outer and inner radius ε₀ is a constant .

Here a = 2.3 x 10⁻⁶ m

b = 2.3 x 10⁻⁶ + .00375 x 10⁻⁶

= 2.30375 x 10⁻⁶ m

b -a = 3.75 x 10⁻⁹ m .

k = 9

4π ε₀ = 1 / 9 x 10⁹ = .111 x 10⁻⁹

C=  .111 x 10⁻⁹ x 9 x 2.3 x 10⁻⁶ x 2.30375 x 10⁻⁶ / 3.75 x 10⁻⁹

= 1.41 x 10⁻¹² F

= 1.41 pF .

Answer:

F = 0.414 N

Explanation:

Given that,

Magnetic flux density,[tex]B=3.6\times 10^{-2}\ T[/tex]

The length of the wire, l = 24 m

Current, I = 0.48 A

We need to find the force acting on the wire. The formula for the force is given by:

[tex]F=ILB[/tex]

Put all the values,

[tex]F=0.48\times 24\times 3.6\times 10^{-2}\\\\F=0.414\ N[/tex]

So, the force acting on the copper wire is equal to 0.414 N.

The magnetic force of the copper wire is  41.472 N.

The magnetic force of the copper wire is calculated by applying the following equation.

F = BIL x sinθ

Where;

F = (3.6 x 10⁻²) x (48) x 24 x sin(90)

F = 41.472 N

Thus, the magnetic force of the copper wire is  41.472 N.

Learn more about magnetic force here:  https://brainly.com/question/13277365

Answer:

An object overall change in position

Explanation:

ans maybe corre6

Answer:

Average speed = 24 km/h

Explanation:

Given the following data;

Uniform speed A = 30 km/h

Uniform speed B = 20 km/h

To find the average speed;

Mathematically, the average speed of an object is given by the formula;

[tex] Average \; speed = \frac {total \; distance}{total \; time} [/tex] ..... equation 1

Total time = TA + TB

[tex] T_{A} = \frac {x}{30} [/tex]

[tex] T_{B} = \frac {x}{20} [/tex]

[tex] Total \; time = \frac {x}{30} + \frac {x}{20} [/tex]

[tex] Total \; time = \frac {5x}{60} [/tex]

Total distance = x + x

Total distance = 2x

Substituting the values into equation 1;

[tex] Average \; speed = \frac {2x}{\frac {5x}{60}} [/tex]

[tex] Average \; speed = \frac {2x*60}{5x} [/tex]

[tex] Average \; speed = \frac {120}{5} [/tex]

Average speed = 24 km/h

Answer:

La rapidez del móvil es 12 kilómetros por hora.

Explanation:

Asumamos que el móvil experimenta un movimiento rectilíneo uniforme, cuya ecuación cinemática es la siguiente:

[tex]v = \frac{x}{t}[/tex] (1)

Where:

[tex]x[/tex] - Distancia recorrida, en kilómetros.

[tex]t[/tex] - Tiempo, en horas.

[tex]v[/tex] - Rapidez, en kilómetros por hora.

Si tenemos que [tex]x = 6000\,m[/tex] y [tex]t = 30\,min[/tex], entonces la rapidez del móvil es:

[tex]v = \frac{6000\,m\times \frac{1}{1000}\,\frac{km}{m}}{30\,min \times \frac{1}{60}\,\frac{h}{min} }[/tex]

[tex]v = 12\,\frac{km}{h}[/tex]

La rapidez del móvil es 12 kilómetros por hora.

Answer:

D.

Explanation:

Force and distance are inversely related, so a greater distance results in a weaker force.

Answer:

Density → Mass and Length.

Acceleration → Length and Time.

Force → Mass, Length and Time.

Pressure → Mass, Length and Time.

Work → Mass, Length and Time.

Explanation:

Noise is sound with a continuous structure. Music is composed of sounds with a fundamental frequency and overtones. Noise is composed of sounds with frequencies that range continuously in value from as low as you can hear to as high as you can hear — not necessarily at equal intensity, however.

Answer:

GAMMA RAYS:

A photon emitted spontaneously by a radioactive substance also : a photon of higher energy than that of an X-ray.

USES OF GAMMA RAYS:

Gamma rays are used in medicine (radiotherapy), industry (sterilization and disinfection), and the nuclear industry. Shielding against gamma rays is essential because they can cause diseases to skin or blood, eye disorders, and cancers.

Answer:

Unlike hard disks, which use magnetic charges to represent 1s and 0s, Compact Disks, DVD's or Blue Rays use reflected light.

Explanation:

The way CD's work is that they are hit by a laser beam which is reflected on the surface of the disc. These disks have some valleys and mountains that reflect light differently so the CD player will interpret these differences in reflection as data which will then be turned into music, videos or computer files.

Answer:

5.25%

Explanation:

From the question given above, the following data were obtained:

Accepted value = 238857 miles

Measured value = 226316 miles

Percentage error =.?

Next, we shall determine the absolute error. This can be obtained as follow:

Accepted value = 238857 miles

Measured value = 226316 miles

Absolute Error =?

Absolute Error = |Measured – Accepted|

Absolute Error = |226316 – 238857|

Absolute Error = 12541

Finally, we shall determine the percentage error. This can be obtained as follow:

Accepted value = 238857 miles

Absolute Error = 12541

Percentage error =.?

Percentage error = absolute error / accepted value × 100

Percentage error

= 12541 / 238857 × 100

= 1254100 / 238857

= 5.25%

Therefore, the percentage error is 5.25%.

Answer:

80 m

Explanation:

Given :

Initial Velocity, U = 28 m/s

θ = 45°

The maximum range occurs at angle, θ = 45°

The maximum range, R is given by ;

R = U²sin2θ / g

g = acceleration due to gravity = 9.8 m/s²

Plugging in the values :

R = [28² * sin2(45)] / 9.8

R = [28² * sin90] / 9.8

R = 784 / 9.8

R = 80 m

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

The plane has a centripetal acceleration a of

a = v ²/r

where v is the plane's tangential speed and r is the radius of the circle. By Newton's second law,

F = mv ²/r

Solve for the mass m :

m = Fr/v ² = (3000 N) (18.3 m) / (55.0 m/s)² ≈ 18.1 kg

Velocity is vector quantity because it has both magnitude and direction.

Explanation:

velocity is a vector quantity because the person always returns to the original position,the motion would never result in a change in a position.

Answer:

x,y

jjoffos

fif

hofdhDJiyfuID pork chop it off the bus to school today I am not a mixture of my favorite thing in life that is the best of the day before

Answer:

Explanation:

This is a recoil problem, which is just another application of the Law of Momentum Conservation. The equation for us is:

[tex][m_av_a+m_ev_e]_b=[m_av_a+m_ev_e]_a[/tex] which, in words, is

The momentum of the astronaut plus the momentum of the piece of equipment before the equipment is thrown has to be equal to the momentum of all that same stuff after the equipment is thrown. Filling in:

[tex][(90.0)(0)+(.50)(0)]_b=[(90.0)(v)+(.50)(-4.0)]_a[/tex]

Obviously, on the left side of the equation, nothing is moving so the whole left side equals 0. Doing the math on the right and paying specific attention to the sig fig's here (notice, I added a 0 after the 4 in the velocity value so our sig fig's are 2 instead of just 1. 1 is useless in most applications).

0 = 90.0v - 2.0 and

2.0 = 90.0v so

v = .022 m/s This is the rate at which he is moving TOWARDS the ship (negative was moving away from the ship, as indicated by the - in the problem). Now we can use the d = rt equation to find out how long this process will take him if he wants to reach his ship before he dies.

12 = .022t and

t = 550 seconds, which is the same thing as 9.2 minutes

Answer:

What languages do i sqeak?

English, Korean and Filipino

Uhh why are you asking it?

Answer:

Explanation:

What we are basically looking for here is how long it takes the first stone to hit the water. We have everything we need to figure that out. We will use the equation

Δx = . Filling in, we will solve for t, the time is takes the first stone to hit the water (which is the same for both since they both hit the water at the same time):

which is a quadratic that we will have to factor. Get it into standard form, setting it equal to 0:

and factor to get that

t = 3.2 s and t = -2.8 s

Since time can't ever be negative, it takes 3.2 s for the stones to hit the water.

Answer:

it is because solar energy is the perpetual source of energy and by using it non renewable sources of energy can be conserved for the future

Answer:

The surface gravity g of the planet is 1/4 of the surface gravity on earth.

Explanation:

Surface gravity is given by the following formula:

[tex]g=G\frac{m}{r^{2}}[/tex]

So the gravity of both the earth and the planet is written in terms of their own radius, so we get:

[tex]g_{E}=G\frac{m}{r_{E}^{2}}[/tex]

[tex]g_{P}=G\frac{m}{r_{P}^{2}}[/tex]

The problem tells us the radius of the planet is twice that of the radius on earth, so:

[tex]r_{P}=2r_{E}[/tex]

If we substituted that into the gravity of the planet equation we would end up with the following formula:

[tex]g_{P}=G\frac{m}{(2r_{E})^{2}}[/tex]

Which yields:

[tex]g_{P}=G\frac{m}{4r_{E}^{2}}[/tex]

So we can now compare the two gravities:

[tex]\frac{g_{P}}{g_{E}}=\frac{G\frac{m}{4r_{E}^{2}}}{G\frac{m}{r_{E}^{2}}}[/tex]

When simplifying the ratio we end up with:

[tex]\frac{g_{P}}{g_{E}}=\frac{1}{4}[/tex]

So the gravity acceleration on the surface of the planet is 1/4 of that on the surface of Earth.

Answer:

the correct answer is B

Explanation:

To solve the system they must have the same amount of unknowns as equations,

a) If the system does not have friction, we must write the x-axis equation for each body, therefore we need to write N equations

b) if the system has friction, two equations are needed for each particle

therefore the correct answer is B