hii please help i’ll give brainliest!!

Answer:

The desert biome is an ecosystem that forms due to the low level of rainfall it receives each year. Deserts cover about 20% of the Earth. There are four major types of desert in this biome - hot and dry, semiarid, coastal, and cold. They are all able to inhabit plant and animal life that are able to survive there. Although the daytime temperatures of the desert biome are very hot, they can get very cold at night. The Sahara Desert is the largest desert in the desert biome. It covers over 300 million square miles.

Explanation:

Answer:

the force of attraction between the two charges is 3.55 N.

Explanation:

Given;

first charge carried by the object, q₁ = 15.5 µC

second charge carried by the q₂ = -7.25 µC

distance between the two charges, r = 0.525 m

The force of attraction between the two charges is calculated as;

[tex]F = \frac{kq_1q_2}{r^2} \\\\F = \frac{(9\times 10^9)(15\times 10^{-6})(7.25\times 10^{-6})}{(0.525)^2} \\\\F = 3.55 \ N[/tex]

Therefore, the force of attraction between the two charges is 3.55 N.

Answer:

Joules/second^2=(Newton×meter)/second^2.

Solving for mass: Kg= (second^3/ meter^2).

Answer:

knee to chest

Explanation:

I took the test

Answer:

C. Knee to chest.

Answer:

4 meters per second

Explanation:

Answer:

If all these three charges are positive with a magnitude of [tex]1.8 \times 10^{-8}\; \rm C[/tex] each, the electric potential at the midpoint of segment [tex]\rm AB[/tex] would be approximately [tex]8.3 \times 10^{3}\; \rm V[/tex].

Explanation:

Convert the unit of the length of each side of this triangle to meters: [tex]10\; \rm cm = 0.10\; \rm m[/tex].

Distance between the midpoint of [tex]\rm AB[/tex] and each of the three charges:

Let [tex]k[/tex] denote Coulomb's constant ([tex]k \approx 8.99 \times 10^{9}\; \rm N \cdot m^{2} \cdot C^{-2}[/tex].)

Electric potential due to the charge at [tex]\rm A[/tex]: [tex]\displaystyle \frac{k\, q}{d({\rm A})}[/tex].

Electric potential due to the charge at [tex]\rm B[/tex]: [tex]\displaystyle \frac{k\, q}{d({\rm B})}[/tex].

Electric potential due to the charge at [tex]\rm A[/tex]: [tex]\displaystyle \frac{k\, q}{d({\rm C})}[/tex].

While forces are vectors, electric potentials are scalars. When more than one electric fields are superposed over one another, the resultant electric potential at some point would be the scalar sum of the electric potential at that position due to each of these fields.

Hence, the electric field at the midpoint of [tex]\rm AB[/tex] due to all these three charges  would be:

[tex]\begin{aligned}& \frac{k\, q}{d({\rm A})} + \frac{k\, q}{d({\rm B})} + \frac{k\, q}{d({\rm C})} \\ &= k\, \left(\frac{q}{d({\rm A})} + \frac{q}{d({\rm B})} + \frac{q}{d({\rm C})}\right) \\ &\approx 8.99 \times 10^{9}\; \rm N \cdot m^{2} \cdot C^{-2} \\ & \quad \quad \times \left(\frac{1.8 \times 10^{-8} \; \rm C}{0.050\; \rm m} + \frac{1.8 \times 10^{-8} \; \rm C}{0.050\; \rm m} + \frac{1.8 \times 10^{-8} \; \rm C}{\sqrt{3} \times (0.050\; \rm m)}\right) \\ &\approx 8.3 \times 10^{3}\; \rm V\end{aligned}[/tex].

Answer:

[tex]124.62\ \text{rad/s}[/tex]

[tex]3.71\ \text{m/s}[/tex]

[tex]1.23\ \text{km/s}^2[/tex]

[tex]20.28\ \text{m}[/tex]

Explanation:

r = Radius of disk = 7.9 cm

N = Number of revolution per minute = 1190 rev/minute

Angular speed is given by

[tex]\omega=N\dfrac{2\pi}{60}\\\Rightarrow \omega=1190\times \dfrac{2\pi}{60}\\\Rightarrow \omega=124.62\ \text{rad/s}[/tex]

The angular speed is [tex]124.62\ \text{rad/s}[/tex]

r = 2.98 cm

Tangential speed is given by

[tex]v=r\omega\\\Rightarrow v=2.98\times 10^{-2}\times 124.62\\\Rightarrow v=3.71\ \text{m/s}[/tex]

Tangential speed at the required point is [tex]3.71\ \text{m/s}[/tex]

Radial acceleration is given by

[tex]a=\omega^2r\\\Rightarrow a=124.62^2\times 7.9\times 10^{-2}\\\Rightarrow a=1226.88\approx 1.23\ \text{km/s}^2[/tex]

The radial acceleration is [tex]1.23\ \text{km/s}^2[/tex].

t = Time = 2.06 s

Distance traveled is given by

[tex]d=vt\\\Rightarrow d=\omega rt\\\Rightarrow d=124.62\times 7.9\times 10^{-2}\times 2.06\\\Rightarrow d=20.28\ \text{m}[/tex]

The total distance a point on the rim moves in the required time is [tex]20.28\ \text{m}[/tex].

Answer:

206

Explanation:

The axial skeleton, comprising the spine, chest and head, contains 80 bones. The appendicular skeleton, comprising the arms and legs, including the shoulder and pelvic girdles, contains 126 bones, bringing the total for the entire skeleton to 206 bones.

A fully grown adult features 26 bones in the spine, whereas a child can have 34.

Answer:

The human body is made up of 206 bones

A property of cells, tissues, and organisms that allows the maintenance and regulation of the stability and constancy needed to function properly. Homeostasis is a healthy state that is maintained by the constant adjustment of biochemical and physiological pathways.

have a good day :).

Answer:

x10 - 6 +(8+6-4)= 10

10m -10x y0

Answer:

Convergent boundaries. When two plates collide and one is pushed over the other, forming a mountain.

Answer:

athlete  W = 2560 J

roce      W_{fr} = - 2560 J

Explanation:

For this exercise we can use the relationship between work and kinetic energy

          W = ΔK

          W = K_f -K₀

as the bearing of rest its v₀ = 0 and the final velocity is v = 8 m / s

athlete's job is

           W = ½ m [tex]v_{f}^2[/tex] - 0

let's calculate

           W = ½ 80 8²

            W = 2560 J

For the work of the friction force let us use that since the athlete goes at constant speed, they relate it to zero, therefore the forces are in equilibrium

             ∑F = 0

             F- fr = 0

             F = fr

Therefore, the magnitude of the friction force is equal to the force applied by the athlete, as the friction force always has the opposite direction to the movement, its work is

             W_{fr} = - W_{atlete}

             W_{fr} = - 2560 J

Answer:

Place the convex lens on a 'V' stand. . ii) Light a candle and take it far away from the lens along the principal axis. iii) Adjust the screen on the other side of the lens to get a clear image on it. iv) Measure the distance between the 'V' stand and the screen which gives a rough idea of the focal length of the lens.

Answer:

Solution:

Explanation:

Here, mass of body ( m)=12kg.

velocity (v)=37.5 m/s. momentum = mass× velocity = 12kg×37.5m/s =450kgm/s ans.

Answer:

The tension on the slack segment of the belt is 65 N

Explanation:

The given parameters are;

The mass of the solid disk = 70.5 kg

The diameter of the flywheel disk, D = 1.25 m

The radius of the pulley = 0.230 m

If the tension in the upper segment of the belt = 165 N

The angular acceleration of the flywheel = 1.67 rad/s²

The moment of inertia of a circular disc, I = 1/2·M·r²

The radius of the flywheel, r = D/2 = (1.25 m)/2 = 0.625 m

The moment of inertia of the flywheel, I = 1/2 × 70.5 kg × (0.625 m)² = 13.7695312 m²·kg

The moment of inertia, I = 13.7695312 m²·kg

Torque, τ = Moment of Inertia, I × Angular acceleration, α

Torque, τ = I × α

τ = 13.7695312 m²·kg × 1.67 rad/s² = 22.9951171 N·m ≈ 23 N·m

The torque applied from the pulley side is given as follows;

Let [tex]T_{slk}[/tex] represent the tension on the slack segment of the belts, we have;

23 N·m = (165 N - [tex]T_{slk}[/tex]) × 0.230 m

∴ 165 N - [tex]T_{slk}[/tex] = 23 N·m/0.230 m = 100 N

[tex]T_{slk}[/tex] = 165 N - 100 N = 65 N

The tension on the slack segment of the belt, [tex]T_{slk}[/tex] = 65 N

The tension on the slack segment of the belt is 65 N

flywheel, heavy wheel attached to a rotating shaft so as to smooth out delivery of power from a motor to a machine. The inertia of the flywheel opposes and moderates fluctuations in the speed of the engine and stores the excess energy for intermittent use.

The given parameters are;

The mass of the solid disk = 70.5 kg

The diameter of the flywheel disk, D = 1.25 m

The radius of the pulley = 0.230 m

If the tension in the upper segment of the belt = 165 N

The angular acceleration of the flywheel = 1.67 rad/s²

The moment of inertia of a circular disc, I = 1/2·M·r²

The radius of the flywheel, r = D/2 = (1.25 m)/2 = 0.625 m

Now we will  calculate tension on the slack side

The moment of inertia of the flywheel,

[tex]I = \dfrac{1}{2} \times 70.5 kg \times (0.625 m)^2 = 13.7695312 \ m^2 \ kg[/tex]

The moment of inertia, I = 13.7695312 m²·kg

Torque, τ = Moment of Inertia, I × Angular acceleration, α

Torque, τ = I × α

τ = [tex]13.7695312 \times 1.67 = 22.9951171 Nm = 23 Nm[/tex]

The torque applied from the pulley side is given as follows;

Let  represent the tension on the slack segment of the belts, we have;

23 N·m = (165 N - ) × 0.230 m

∴ 165 N -  = 23 N·m/0.230 m = 100 N

= 165 N - 100 N = 65 N

The tension on the slack segment of the belt,  = 65 N

To know more about flywheels follow

https://brainly.com/question/25709397

Answer:

not enough

Explanation:

information given

Answer:

Sample Response: In the lab, I discovered the air pressure, air temperature, and relative humidity conditions that create snow, rain, thunderstorms, fog, and clear skies. I learned that low-pressure areas usually experience snowy, rainy, and stormy weather, and that high-pressure areas usually experience either foggy or sunny weather. Knowing how these atmospheric conditions influence weather help weather forecasters predict weather patterns through maps and other information.

(Sorry this was not fast enough )

Answer:

Efficiency

Explanation:

Answer:

No, he hasn't done any work.

Explanation:

In this scenario, the weightlifter hasn't done any work because even though he lifted the bell for a specific period of time, he didn't cover any distance.

Mathematically, work done is given by the formula;

Work done = force * distance

[tex] W = F * d[/tex]

Where,

W is the work done

F represents the force acting on a body.

d represents the distance covered by the body.

Power can be defined as the energy required to do work per unit time.

Mathematically, it is given by the formula;

[tex] Power = \frac {Energy}{time} [/tex]

Answer:

The Answer is B: to provide traction so that slipping does not occur

Explanation:

if it is wrong please correct me

Answer:

v₂ = 5.7 m/s

Explanation:

We will apply the law of conservation of momentum here:

[tex]Total\ Initial\ Momentum = m_{1}v_{1} + m_{2}v_{2}\\[/tex]

where,

Total Initial Momentum = 340 kg.m/s

m₁ = mass of bike

v₁ = final speed of bike = 0 m/s

m₂ = mass of Sheila = 60 kg

v₂ = final speed of Sheila = ?

Therefore,

[tex]340\ kg.m/s = m_{1}(0\ m/s) + (60\ kg)v_{2}\\v_{2} = \frac{340\ kg.m/s}{60\ kg}\\\\[/tex]

v₂ = 5.7 m/s

Answer:

5.7 I got it right on edg 2021

Explanation:

Answer: 20.4 m

Explanation: speed v upward is v = vo -gt.

When maximum height v = 0, vo -gt = 0 and

T = vo / g = 20 m/s / 9.81 m/s² = 2.04 s

Now height y = vot -0.5 gt^2 = 20,4 m

This is possible to solve using

Conservation of energy Ek= Ep

0.5mv² = mgh. And h = v²/2g. Results same

Answer:

friction force

Explanation:

friction forces a force that opposed the relative motion of two bodies in contact or when sliding

Answer:D. Watching the left-over dirt from a comet burn up by friction as the pieces hit the Earth's atmosphere

Explanation: A meteor shower is giant rocks moving across the sky

There must be an invitation for d. watching the left-over dirt from a comet burn up by friction as the pieces hit the Earth's atmosphere

Meteor showers occur when dust or particles from asteroids or comets enter Earth's atmosphere at very high speed. When they hit the atmosphere, meteors rub against air particles and create friction, heating the meteors. The heat vaporizes most meteors, creating what we call shooting stars

hence correct option will be D) Watching the left-over dirt from a comet burn up by friction as the pieces hit the Earth's atmosphere

learn more about Meteor showers

https://brainly.com/question/16517600?referrer=searchResults

#SPJ2

What does "the following" mean ?

Kinetic energy is directly proportional to speed² .

So kinetic energy doubles if the speed is increased by √2 .

(3 m/s) · (√2)  =  4.243 m/s

Answer:

It will increase.

Explanation:

Because kinetic energy is proportional to the square of the velocity, when velocity is doubled, kinetic energy is quadrupled. Kinetic energy K=mv^2/2

3 things that happen to our body when we don't eat nutritious meals:

1. It can lead to bad eating habits that may cause obesity or diabetes

2. It can also cause heart disease and cancer

3. it can also make you more tired, and may contribute to stress.

Poor nutrition can contribute to stress, tiredness and our capacity to work, and over time. It can contribute to the risk of developing some illnesses and other health problems such as being overweight or obese.

Hope this helps; have a great day!

When a large number of magnetic domains are aligned, a strong magnet produces more magnetic attraction compared to a weak magnet and non-magnetic material.

Magnetic induction occurs when a magnetic field is used to magnetize another object.

This process occurs when the magnetic domains are aligned in the same direction, which causes the object become magnetized in that direction, thereby forming a magnet.

Thus, when a large number of magnetic domains are aligned, a strong magnet produces more magnetic attraction compared to a weak magnet and non-magnetic material.

Learn more about magnetic domains here: https://brainly.com/question/31744