HIHIHHHHHHHHIHIHIIHIHHHHIHIHIHIHIHIHIHIHIHIHIHIHIHIIH

Answer: C.

Correct me if I'm wrong.

Answer:

5.6

Explanation:

Not so sure

Answer:

Moment of a force is the product of the force and the perpendicular distance of force from axis of rotation.

The SI unit of force is newton (N).

Explanation:

Hope it helps you again!

The maximum mass of a load that can be lifted by the jack and the distance covered are:

m = 160.2 Kg

h = 25 cm

Given that a certain hydraulic jack is used for lifting load. a force of 250N is applied on a small piston with a diameter of 80cm while the diameter of the larger piston is 2.0m.

The parameters given are

[tex]F_{1}[/tex] = 250

[tex]A_{1}[/tex] = Area of the small piston = π[tex]r^{2}[/tex]

[tex]A_{1}[/tex] = 22/7 x [tex]0.4^{2}[/tex]

[tex]A_{1}[/tex] = 0.5 [tex]m^{2}[/tex]

[tex]F_{2}[/tex] = ?

[tex]A_{2}[/tex] = Area of the large piston = π[tex]r^{2}[/tex]

[tex]A_{2}[/tex] = π x 1

[tex]A_{2}[/tex] = 3.14 [tex]m^{2}[/tex]

To calculate the force on the large piston, we will use the below formula

[tex]F_{1}[/tex]/ [tex]A_{1}[/tex] = [tex]F_{2}[/tex] / [tex]A_{2}[/tex]

Substitute all the parameters into the equation

250/0.5 =  [tex]F_{2}[/tex]/3.14

[tex]F_{2}[/tex] = 1570 N

To calculate the maximum mass of a load that can be lifted by the jack, let us apply Newton second law

F = mg

1570 = 9.8m

m = 1570/9.8

m = 160.2 Kg

.(take g=9.81ms^-2)​

If the applied force moves through a distance of 25cm, the distance through which the load is lifted will be

[tex]F_{1}[/tex]/ 0.25[tex]A_{1}[/tex] = [tex]F_{2}[/tex] / [tex]A_{2}[/tex]h

250/0.125 = 1570/3.14h

make h the subject of the formula

6280h = 1570

h = 1570/6280

h = 0.25 m

Therefore, the distance through which the load is lifted is 25 cm

Learn more here: https://brainly.com/question/13596980

Answer:

Explanation:

Average speed is total distance traveled over the time needed to do so.

d = vt

v = (1.0(3.0) + 1.6(5.0) + 1.4(4.0) / (3.0 + 5.0 + 4.0)

v = 16.6 / 12

v = 1.383333333...

v = 1.4 m/s

Hi there!

(A)

A grinding wheel is the same as a disk, having moment of inertia of:

[tex]I = \frac{1}{2}MR^2[/tex]

Plug in the given mass and radius (REMEMBER TO CONVERT) to find the moment of inertia:

[tex]I = \frac{1}{2}(0.380)(0.085)^2 = 0.00137 kgm^2[/tex]

(B)

We can use the rotational equivalent of Newton's Second Law to calculate the needed torque:

Στ = Iα = τ₁ - τ₂

Begin by solving for the angular acceleration. Convert rpm to rad/sec:

[tex]\frac{1750r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 183.26 rad/sec[/tex]

Now, we can use the following equation:

ωf = wi + αt (wi = 0 rad/sec, from rest)

183.26/5 = α = 36.65 rad/sec²

τ = Iα = 0.0503 Nm

Since there is a counter-acting torque on the system, we must begin by finding that acceleration:

[tex]\frac{1500r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 157.08 rad/sec[/tex]

ωf = wi + αt

-157.08/55 = α = -2.856 rad/sec²

τ₂ = Iα = 0.0039 Nm

Now, calculate the appropriate torque using the above equation:

[tex]\Sigma\tau = \tau_1 - \tau_2[/tex]

[tex]\Sigma\tau + \tau_2 = \tau_1[/tex]

[tex]0.0503 + 0.0039 = \large\boxed{0.054 Nm}[/tex]

The length of the segment that will represent the 400 million years is 8.8 cm.

The given parameters:

The length of the segment that will represent the 400 million years is calculated as follows;

4.54 billion years ------------- 1 m

400 million years ------------- ?

[tex]\frac{1 \ m}{4.54 \times 10^9 \ years} \times 400 \times 10^6 \ years = 0.088 \ m[/tex]

The length of the segment in centimeters (cm) is calculated as follows;

[tex]= 0.088 \ m \times 100 \ cm\\\\= 8.8 \ cm[/tex]

Learn more here:https://brainly.com/question/19471802

The  average power produced by the soccer player is  710 Watts.

Given the data in the question;

Power; [tex]P =\ ?[/tex]

Power is simply the amount of energy converted or transferred per unit time. It is expressed as:

[tex]Power = \frac{Energy\ converted }{time}[/tex]

We substitute our given values into the equation

[tex]Power = \frac{5100000J}{7200s}\\\\Power = 708.33J/s \\\\Power = 710J/s \ \ \ \ \ [ 2\ Significant\ Figures]\\\\Power = 710W[/tex]

Therefore, the  average power produced by the soccer player is  710 Watts.

Learn more: https://brainly.com/question/20953664

Answer:

The answer for the question should be True

Particle arrangement and movement

⇒ In terms of relative energy, gas particles have the most energy, solid particles have the least energy and liquid particles are somewhere in between. (All compared at the same temperature.)

- BRAINLIEST answerer

Answer:

BBbbb

Explanation:

B is the correct answer:))))

Answer: Even though the genetic susceptibility plays a crucial role on the IQ of the individual, various modifiable environmental factors like education, premature birth, nutrition, pollution, drug and alcohol abuse, mental illnesses, and diseases can have an influence on an individual's IQ.

Answer:

[tex]12.79 m/s^2[/tex]

Explanation:

1. Apply Newton's 2nd law:

[tex]F=ma[/tex]

2. Use the definition of weight to find the mass of the box:

[tex]W=mg=m=\frac{W}{g}[/tex]

3. Solve for acceleration in Newton's 2nd law and substitute for mass:

[tex]a=\frac{F}{\frac{W}{g} }[/tex]

4. Plug in the given values from the question and assume [tex]g=9.81m/s^2[/tex]:

[tex]a=\frac{777N}{\frac{596N}{9.81m/s^2} } } =12.79m/s^2[/tex]

Answer:

Groundwater Returning to earths Surface come Up Though A drought

Explanation:

THIS DOES NOT NEED TO BE EXPLAINED IT'S EZZZ

Answer:

Avoid heavy strenuous exercise for the 24 hours prior to testing. Do not exercise at all on the day of testing to ensure you are well rested. Wear appropriate clothing for the conditions (e.g. shorts/track pants and t-shirt/singlet/sports top) and non-slip athletic footwear with laces securely fastened

The motion of the bouncy mushroom can be described as a simple

harmonic motion, SHM.

Reasons:

The given parameters are;

Mass of the mushroom cap, m = 30 g = 0.03 kg

Mass of the bird = 50 g = 0.05 kg

The spring constant, K = 20 N/m

a) The equilibrium height of the mass spring system, is given as follows;

F = -K·x

[tex]x = \dfrac{F}{K}[/tex]

The applied force, F = The weight of the bird

∴ F = (0.05 kg) × 9.81 m/s² = 0.4905 N

[tex]x = \dfrac{0.05 \, kg \times 9.81 \ m/s^2}{20 \, N/m} = 0.024525 \, m[/tex]

The equilibrium height of the mushroom is 0.024525 m below its initial height.

b) The frequency of oscillation of a spring, ω, is given as follows;

[tex]\omega = \sqrt{\dfrac{K}{m} }[/tex]

Therefore;

[tex]\omega = \sqrt{\dfrac{20 \, N/m }{80 \, kg} } = \dfrac{1}{2} \, Hz[/tex]

The frequency of resulting oscillation, ω = [tex]\dfrac{1}{2} \, Hz[/tex] = 0.5 Hz

c) The applied force, F = The weight of the bird and the mushroom cap

F = (0.03 kg + 0.05 kg) × 9.81 m/s² = 0.7848 N

[tex]x = \dfrac{0.7848 \, N}{20 \, N/m } = 0.03924 \, m[/tex]

The maximum compression of the mushroom = 0.03924 m

d) The motion of the mushroom is a Simple Harmonic Motion, SHM.

The equation of a SHM as a function of time is; x(t) = A·cos(ω·t + Φ)

For the mushroom, we have;

The amplitude, A = 0.03924 m - 0.024525 m = 0.014715 m

Ф = The phase angle

When t = 0, cos(ω × 0 + Φ) = 1

cos(Φ) = 1

Ф = arcos(1) = 0

The equation is therefore;

x(t) = 0.014715·cos(0.5·t)

Equation of the oscillation of the mushroom is;  [tex]\underline{x(t) = 0.014715 \cdot cos(0.5\cdot t)}[/tex]

Learn more here:

https://brainly.com/question/15487931

Answer:

thanks for the points dia

The magnitude of the induced electric field is (RdB/dt)/4

The induced electric field is gotten from

-∫E.dl = dФ/dt where E = induced electric field, dl = path length vector, Ф = magnetic flux through cylindrical region = AB where A = area of magnetic flux = πR² where R = radius of cylindrical region and B = magnetic field.

So, -∫E.dl = dФ/dt

-∫E.dl = dAB/dt

-∫Edlcos0 = AdB/dt (where E.dl = Edlcos0 = Edl since E and dl are parallel to each other.)

So -∫Edl = πR²dB/dt

-E∫dl = πR²dB/dt (∫dl = 2πr since the integral is the circumference of the path)

-E(2πr) = πR²dB/dt (we integrate dl from r = 0 to 2R)

-E2π(2R - 0) = πR²dB/dt

-E4πR= πR²dB/dt

E = πR²dB/dt ÷ 4πR

E = -(RdB/dt)/4

So, the magnitude of the induced electric field is (RdB/dt)/4

Learn more about induced electric field here:

https://brainly.com/question/15730392

Answer:

180 LUV:)

Explanation:

Answer:

OK sure why not!!!!!!!!!!!!

Answer:

destroy

Explanation:

cuz if anyhow throw rubbish, it will affect/destroy the world environment

Answer:

bathing regularly 2pollute 3 throwing waste in land water water pollution

Answer:

Transmission

Explanation:

It’s the passage of electromagnetic waves through a medium.

The passage of a wave through a medium is known as transmission.

The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.

Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).

Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.

Therefore, the passage of a wave through a medium is known as transmission.

To learn more about the Transmission of the wave, refer to the link:

https://brainly.com/question/27844842

#SPJ6

Good morning dear...

Have a beautiful and joyful day ahead.

At the equilibrium position of the spring, the mass has kinetic energy

1/2 (1.00 kg) (0.0400 m/s)² = 0.000800 J = 0.800 mJ = 800 µJ

and when the spring is maximally compressed, this kinetic energy is converted into potential energy.

The maximum spring potential energy of the simple harmonic motion is approximately 7.48 millijoules.

To find the maximum spring potential energy (Us) in simple harmonic motion, we need to determine the maximum displacement (A) of the mass from its equilibrium position.

In simple harmonic motion, the maximum displacement is equal to the amplitude of the oscillation.

The formula for maximum displacement (A) is given by:

A = v0 / ω

where v0 is the initial velocity (4.00 cm/s) and ω is the angular frequency of the oscillation.

The angular frequency (ω) is given by:

ω =[tex]\sqrt{(k / m)[/tex]

where k is the spring constant (9.00 N/m) and m is the mass (1.00 kg).

Substitute the values:

ω = [tex]\sqrt{(9.00 N/m / 1.00 kg)} = \sqrt{9.00 rad/s[/tex] ≈ 3.00 rad/s

Now, calculate the maximum displacement:

A = 4.00 cm/s / 3.00 rad/s ≈ 1.33 cm

Next, calculate the maximum spring potential energy:

Us =[tex](1/2) * k * A^2[/tex]

Us = (1/2) * 9.00 N/m * [tex](1.33 cm)^2[/tex]≈ 7.48 mJ

To know more about spring potential energy, here

brainly.com/question/29510087

#SPJ2

--The compleete Question is,  A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then what is the maximum spring potential energy of the simple harmonic motion--

Answer:

Explanation:

Start with Carbon and assume we only get 1 sugar molecule from the process.

you have 6 carbons in the sugar on the right, so you need 6 carbons on the left which only come from CO₂

6 CO₂

you have 12 hydrogen atoms in the sugar on the right, so you need 12 hydrogen atoms on the left which only come from H₂O. At 2 hydrogen atoms per water molecule means you need 6 waters.

6 CO₂ + 6 H₂O → 1 C₆H₁₂O₆

you are supplied with 12 oxygen from the CO₂ and 6 oxygen from the H₂O, but you only need 6 oxygen for the sugar. That means there are 12 oxygen remaining which will become 6 O₂ molecules

6 CO₂ + 6 H₂O → 1 C₆H₁₂O₆ + 6 O₂

Explanation:

The same thing happened in pressure cooker but the temperature inside is most higher.

hope you like my answer

thank you

Because cooking reactions speed up at a higher temperature also the boiling temperature of water increases and hence, the food cooks faster.

source:

https://www.vedantu.com/question-answer/a-pressure-cooker-reduces-cooking-time-for-food-class-9-chemistry-cbse-5feaba32e9fb3d3419e4a61a

Answer:

1) Dependent variable: Type of separation method used

   Independent variables: Substance that separated out

  Constants: Sand, pepper, and salt

2) you can use the properties of matter to decide on a method to separate out a particular substance based on its unique properties. For example, knowing pepper has a very small mass allows you to use the charge of the static electricity to separate out those particles. Additionally, knowing the solubility of salt allows you to add water to the mixture to be able to remove it from the sand, since the salt dissolves in the water which is poured away.

Explanation:

[tex]v = u + at \\ 0 = u + ( - 10 { ms}^{ - 2}) \times 4.2s \\ u = 42 {ms}^{ - 1} [/tex]

Answer:

B. A bat finds a moth using echolocation

Explanation:

100% i just took that test today