HELPPPPPPP

8. Explain the process of making ice cream in terms of heat energy transfer. Be sure to explain why the liquid milk
mixture changed into solid form AND why the ice in the bag started changing to a liquid. (Where was the heat originally
and where did it go? How do you know-what data do you have that proves the thermal energy was transferred?)
Making ice cream is a great way to explore thermal energy transfer. The liquid milk mixture changed to a solid during
the process because thermal energy transferred from the liquid milk to
The ice changed to a
liquid during the process because thermal energy transferred from the
to the ice. Thermal energy
transfer is confirmed by the states of matter changes of the milk mixture and the ice. It is also confirmed by the change
in temperature of the items. The milk mixture had a
in temperature, which confirms thermal
in temperature, which confirms thermal energy being
energy loss. The ice had a(n).
gained.

Answers

Answer 1

Heat is transferred from the cream solution to the ice leading to the ice melting and colder.

What happens to heat energy when making ice cream?

Heat energy goes from the regions with more heat energy to other regions with less heat energy. The milk mixture has more heat energy as compared to the salt and ice. Heat energy goes from the milk mixture to the ice and salt. The milk mixture releases heat energy, which resulted in cooling and freezing which eventually becomes the ice cream solid.

Ice absorbs energy to melt. Heat is transferred from the cream solution to the ice, making the ice melt and the cream colder. Eventually, as the ice absorbs more energy from the cream mixture it will start freezing.

So we can conclude that Heat is transferred from the cream solution to the ice making the ice melt and cold the cream.

Learn more about the heat here: https://brainly.com/question/934320

#SPJ1


Related Questions

A feather and a coin dropped in a vacuum fall with the equal
a) Momentum
b) Acceleration
c) Kinetic energy
d) Forces

Answers

In a vacuum, a feather and a coin will fall with equal acceleration, but not with equal forces, momentum, or kinetic energy.

What is kinetic energy?The drag force created by the air causes the feather to descend more slowly than the coin when there is air present. Both objects will descend with the same acceleration owing to gravity if there is no air present since there will be no air resistance.

Because the acceleration caused by gravity is constant, all objects in free fall will experience the same acceleration, which is around 9.8 m/s2, regardless of their mass. This implies that in a vacuum, the feather and the coin will descend at the same pace.

To know more about kinetic energy , check out :

https://brainly.com/question/25959744

#SPJ1

What planets are on the ecliptic plane?

Answers

The eight planets in our solar system, including Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, are on the ecliptic plane.

The ecliptic plane is defined as the imaginary plane in space that contains Earth's orbit around the sun. Since all of the planets in our solar system orbit the sun, they are also on this same plane. The planets' orbits are not perfect circles, but are rather slightly elliptical, meaning they can vary slightly from the ecliptic plane.

However, in general, the planets stay relatively close to the ecliptic plane as they orbit the sun. This is significant because it allows astronomers to make predictions and observations about the planets' movements and positions in the sky.

To know more about the planets, here

brainly.com/question/14581221

#SPJ4

early february is halfway between what two seasonal events. t/f

Answers

True.

Early February is halfway between the winter solstice and the spring equinox in the Northern Hemisphere.

What is Winter Solstice & Spring Equinox?

The winter solstice occurs around December 21st or 22nd and marks the shortest day and longest night of the year. The spring equinox occurs around March 20th or 21st and marks the start of spring, when the day and night are roughly equal in length. Halfway between these two events is approximately February 10th, marking the gradual shift from winter to spring.

The winter solstice marks the point when the sun is at its farthest point from the equator and the Northern Hemisphere is tilted away from the sun, causing the shortest day and longest night of the year. On the other hand, the spring equinox marks the point when the sun is directly over the equator and the day and night are approximately equal in length.

Halfway between the winter solstice and the spring equinox is a time when the days start to get noticeably longer and the sun rises higher in the sky, signaling the end of winter and the beginning of spring. This is a gradual transition and not a sudden change. In early February, the sun rises earlier and sets later, and the length of daylight continues to increase until the spring equinox.

In the Northern Hemisphere, early February is a time when the weather starts to warm up and the first signs of spring become visible, such as the emergence of buds on trees and the first crocus flowers in gardens. However, it is still winter and the weather can be cold and wintry.

In the Southern Hemisphere, early February is the height of summer, with warm temperatures and longer daylight hours. This is the opposite of the Northern Hemisphere, where it is the height of winter.

To know more about solstice & equinox, visit:

brainly.com/question/11549647

#SPJ4

What is kinetic-molecular theory in solids?

Answers

Kinetic molecular theory states that gas particles are in constant motion and exhibit perfectly elastic collisions.

The assumption that matter is made up of microscopic particles that are always in motion is the foundation of the kinetic-molecular theory, a theory that describes the states of matter.

However, the theory is most simply understood when it is applied to gases, therefore this is where our in-depth study will start. The theory especially pertains to the ideal gas model of a gas. An ideal gas is a hypothetical gas whose behaviour exactly matches all of the kinetic-molecular theory's presumptions. Although they are not perfect in actuality, gases come extremely close to being perfect in most real-world situations.

To know more about the kinetic-molecular theory, here

brainly.com/question/134712

#SPJ4

Light and Sound Waves Quick Check

How are mechanical waves defined? (1 point)

1. They are waves that require some form of matter as a medium.

2. They are waves that involve matter, rather than energy, moving from one place to another.

3. They are waves that are generated by humans, rather than naturally.

4. They are waves that are able to pass through a vacuum.

Answers

Mechanical waves can be defined as one whereby 1. They are waves that require some form of matter as a medium.

What is mechanical wave?

An oscillation of matter known as a mechanical wave is what is responsible for the transmission of energy via a medium. The transmission medium sets a restriction on how far a wave can travel. In this instance, there is almost little translational motion and the oscillating material rotates around a fixed point.

A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium. A mechanical wave is something like a sound wave.

Therefore, option 1 is correct.

Learn more about Mechanical waves at:

https://brainly.com/question/26116832

#SPJ1

Answer:

1.

Explanation:

i did test

What is spring-mass-damper system formula?

Answers

The formula of a spring-mass-damper system is given by md2x/dt2 + cdx/dt + kx = F(t).

The spring-mass-damper system is a common model used in physics and engineering to describe the behavior of various mechanical systems, such as a car suspension system or a building during an earthquake. The equation of motion for a spring-mass-damper system is typically given by:

md2x/dt2 + cdx/dt + kx = F(t)

where m is the mass of the object attached to the spring and damper, x is the displacement of the mass from its equilibrium position, t is time, c is the damping coefficient, k is the spring constant, and F(t) is an external force applied to the system at time t.

The term md2x/dt2 represents the acceleration of the mass, while cdx/dt represents the damping force (i.e. resistance to motion) caused by the damper, and kx represents the force exerted by the spring. The external force F(t) can be any force applied to the system, such as an oscillating force or a constant force.

The solution to this differential equation depends on the initial conditions (i.e. the initial position and velocity of the mass) and the specific values of the parameters m, c, and k. The behavior of the system can be analyzed using various techniques, such as finding the natural frequency of the system or using numerical simulations to model the motion over time.

For such more questions on Equilibrium

https://brainly.com/question/517289

#SPJ4

Following are the four fundamental forces. Rank these forces from left to right based on their relative strengths between two protons located within the nucleus of an atom, from weakest to strongest.

Answers

Forces from left to right based on their relative strengths between two protons located within the nucleus of an atom, from weakest to strongest is Electromagnetism, Weak nuclear force, Strong nuclear force, Gravity.

The four fundamental forces are:

Gravity

Weak nuclear force

Electromagnetism

Strong nuclear force

When considering the strength of these forces between two protons located within the nucleus of an atom, the ranking from weakest to strongest would be:

Electromagnetism

Weak nuclear force

Strong nuclear force

Gravity

The electromagnetic force is responsible for the attraction and repulsion of charged particles, such as protons, and is the force that holds the positively charged protons together in the nucleus of an atom.

The weak nuclear force is responsible for the decay of subatomic particles and is much weaker than the electromagnetic force.

The strong nuclear force is responsible for holding the nucleus of an atom together and is much stronger than the weak nuclear force.

Gravity is the weakest of the four fundamental forces and is responsible for the attraction between massive objects, such as planets and stars. Its strength is negligible at the scale of subatomic particles.

To know more about Forces please refer: https://brainly.com/question/13191643

#SPJ4

Question- Following are the four fundamental forces. Rank these forces from left to right based on their relative strengths between two protons located within the nucleus of an atom, from weakest to strongest.

Gravity; weak; electromagnetism; strong

Electromagnetic radiation consists of particles called ______, each of which has a discrete amount, or quantum, of energy. However, since electromagnetic radiation also has wave properties, each particle is also characterized by a specific ___________ (m) and frequency (s⁻¹).a. Photons, Wavelengthb. Energy, Waves.c. Wave, Mass.d. Decreases, Less.

Answers

If you think of electromagnetic radiation as a flow of massless particles called photons,

What is the name of the electromagnetic radiation subatomic particles, each of which has a specific quantity of energy termed a?

An electromagnetic wave makes up a photon, a small particle. They are both massless and chargeless. They can be compared to a tiny bag of light energy. A quantum, or discrete packet of gas or matter, is an example.

Are photons a component of electromagnetic waves?

a spectrum of electromagnetic waves. A stream of photons, each carrying energy and flowing at the speed of light, can be compared to electromagnetic radiation, as was stated in the handy guide on the electromagnetic spectrum.

To know more about electromagnetic visit :

https://brainly.com/question/17057080

#SPJ4

A 0. 50-m long solenoid consists of 800 turns of copper wire wound with a 5. 0 cm radius. When the current in the solenoid is 12 a, the magnetic field at a point 1. 0 cm from the central axis of the solenoid is.

Answers

The magnetic field at a point 1.0 cm from the central axis of the solenoid is 1.6 x 10^-3 T.

The magnetic field (B) inside a solenoid can be calculated using the formula:

B = μ_0 * n * I / L

where μ_0 is the vacuum permeability (4π x 10^-7 T m/A), n is the number of turns per unit length, I is the current in the solenoid, and L is the length of the solenoid.

For the given solenoid, the number of turns per unit length can be calculated as follows:

n = 800 turns / 0.5 m

n = 1600 turns/m

At a point 1.0 cm from the central axis of the solenoid, the magnetic field can be calculated as follows:

B = μ_0 * 1600 turns/m * 12 A / (0.05 m)

B = 1.6 x 10^-3 T.

To learn more about Magnetic field :

https://brainly.com/question/15087940

#SPJ4

the pressure indicated by the question mark is the __________.

Answers

The pressure indicated by the question mark is systolic pressure. Option 1 is correct.

Systolic pressure is the highest pressure exerted on the walls of the arteries when the heart contracts and pumps blood out into the circulatory system. During each heartbeat, the heart first contracts and pushes blood out of the left ventricle into the aorta, causing an increase in pressure within the arteries.

For instance, in a blood pressure reading of 120/80 mmHg, the systolic pressure is 120 mmHg. Systolic pressure can vary based on factors such as age, physical activity, stress, and overall health. High systolic pressure over time can damage blood vessels and increase the risk of heart disease, stroke, and other health problems.

To know more about the systolic pressure, here

brainly.com/question/15175692

#SPJ4

--The complete question is, The pressure indicated by the question mark is the __________.

a. systolic pressure

b. mean arterial pressure

c. pulse pressure

d. diastolic pressure--

4. Find someone in the class that has a wire hoop with a different number of loops in it. When you put your magnet near their hoop, does it rotate at the same rate, at a greater rate, or at a lower rate? Explain why you think this is relative to their number of loops.

Answers

When you put your magnet near a wire hoop with a different number of loops, the rate of rotation will depend on the number of loops in the wire hoop.

How does wire hoop experiment work?

The greater the number of loops, the greater the induced current and the stronger the magnetic field. This results in a greater torque on the wire hoop and a faster rate of rotation. On the other hand, a wire hoop with a smaller number of loops will have a weaker induced current and magnetic field, resulting in a slower rate of rotation.

Therefore, the rate of rotation of the wire hoop will depend on the number of loops in the wire hoop, with more loops resulting in a greater rate of rotation and fewer loops resulting in a slower rate of rotation.

Learn more on wire hoop here: https://brainly.com/question/14284116

#SPJ1

the earliest known measurement of the circumference of the earth used is called___

Answers

The earliest known measurement of the circumference of the earth used is called ;  Eratosthenes' Method.

What is the measurement ?

The measurement is the process of determining the size, amount, or degree of something. Measurement can involve counting, weighing, or measuring physical characteristics such as length or volume. It can also involve observing or assessing behavior, or determining the amount or degree of something that cannot be physically measured, such as intelligence or happiness. Measurement is an important tool in many fields, including science, economics, engineering, and industry. Measurements are often used to compare different items or to track changes over time.

To learn more about measurement

https://brainly.com/question/29223620

#SPJ4

The earliest known measurement of the circumference of the earth used is called ;  Eratosthenes' Method.

What is the measurement ?

The measurement is the process of determining the size, amount, or degree of something. Measurement can involve counting, weighing, or measuring physical characteristics such as length or volume.

It can also involve observing or assessing behavior, or determining the amount or degree of something that cannot be physically measured, such as intelligence or happiness.

Measurement is an important tool in many fields, including science, economics, engineering, and industry. Measurements are often used to compare different items or to track changes over time.

To learn more about measurement

https://brainly.com/question/27122947

#SPJ4

a mass is hanging from spring and vibrating. it is replaced by a mass which is twice as large and its amplitude is increased by a factor of two. what happens to the period of the pendulum?

Answers

The period of the pendulum will increase by a factor of √2 when the mass is replaced by a mass that is twice as large, but the amplitude is increased by a factor of 2.

The period of a simple harmonic oscillator, such as a mass hanging from a spring, is given by:

T = 2π√(m/k)

where T is the period, m is the mass, and k is the spring constant.

If we replace the original mass with a new mass that is twice as large, the period will change as follows:

T' = 2π√(2m/k)

where T' is the new period.

If we also increase the amplitude of the motion by a factor of 2, this will not affect the period of the pendulum. The period depends only on the mass and the spring constant, and is independent of the amplitude of the motion.

Therefore, the new period of the pendulum will be:

T' = 2π√(2m/k)

which is equal to the original period multiplied by the square root of 2.

Learn more about pendulum here:

https://brainly.com/question/26524032

#SPJ4

Please match each term with it’s correct definition

Answers

The terms are paired with their correct definitions as shown above.

Why is physics?Physics is the cornerstone of the other natural sciences (chemistry, geology, biology, astronomy) and is essential to understanding our modern technological society. At the heart of physics is a combination of experiment, observation and the analysis of phenomena using mathematical and computational tools

Given is to match the terms with the correct definition.

We can write the pairs as -

{ 1 } → { b }

{ 2 } → { f }

{ 3 } → { a }

{ 4 } → { d }

{ 5 } → { e }

{ 1 } → { c }

Therefore, the terms are paired with their correct definitions as shown above.

To solve more questions on physics terms, visit the link-

brainly.com/question/29014197

#SPJ1

what is fl oz in l conversion?

Answers

Fluid ounces (fl oz) and liters (L) are units of volume, with the former being more commonly used in the United States and the latter being more commonly used in most other parts of the world.

To convert from fluid ounces to liters, you can use the following conversion factor:

1 fl oz = 0.0295735 L

Volume is the measure of space occupied by an object or substance. It is expressed in different units depending on the system of measurement used. In the International System of Units (SI), the standard unit of volume is cubic meters (m³). However, in practical situations, other units are commonly used.

In the metric system, liters (L) and milliliters (mL) are used as units of volume. A liter is equal to one cubic decimeter (1 dm³), while a milliliter is one-thousandth of a liter. In the US customary system, fluid ounces (fl oz), cups (c), pints (pt), quarts (qt), and gallons (gal) are used. One fluid ounce is equal to 29.5735 milliliters, while one gallon is equal to 3.78541 liters.

To learn more about Units of volume visit here:

brainly.com/question/30698644

#SPJ4

two coherent sources of radio waves, a and b, are 5.00 meters apart. each source emits waves with wavelength 6.00 meters. consider points along the line connecting the two sources.

Answers

At points along the line connecting the two sources, the two sources of radio waves interfere with each other. This interference can result in constructive or destructive interference, depending on the relative phase of the waves at the point of interest.

If the two waves have the same phase, they will reinforce each other, resulting in constructive interference and a maximum in the total amplitude of the waves. If the two waves have a phase difference of 180 degrees, they will cancel each other out, resulting in destructive interference and a minimum in the total amplitude of the waves.

The phase difference between the two waves at a given point along the line connecting the two sources can be calculated using the difference in the path lengths from the two sources to the point. The path difference is given by:

d = (2n + 1) λ/2

where n is an integer, λ is the wavelength of the radio waves, and d is the path difference. For constructive interference, the path difference must be an integer multiple of λ, while for destructive interference, it must be an odd multiple of λ/2.

So, considering the two sources of radio waves a and b are 5.00 meters apart and each source emits waves with wavelength 6.00 meters, the path difference between the two waves at a given point along the line connecting the two sources can be calculated as d = 5.00 meters. Based on the equation above, this corresponds to a phase difference of approximately 150 degrees, resulting in destructive interference at that point.

Learn more about radio waves:

https://brainly.com/question/69373

#SPJ4

Which motor performs more work in the same amount of time- a 10 kW motor or a 20 kW motor? How much more work can it do?

Answers

Answer:

20kw twice the work

Explanation:

How does the proportion of hydrogen and helium in the universe support the big bang theory?.

Answers

According to extensive spectroscopic studies, it became clear that the hydrogen: helium ratio is proven to be 3:1. Along with the scarcity of other elements gives clues that supports Big Bang.

Before big bang all the atoms and molecules were dissociated and ionized. because the temperature was very higher. After Big Bang happened, the temperature falls down rapidly, and all ions fused to form atoms and molecules. Since the process was much faster protons and neutrons collided to form deuterium, Collision between deuterium and protons and neutrons occurred resulting in tritium and helium. A small amount of lithium was also formed. Formation of heavier atoms have not occurred because the process was rapid.

Almost all the matter were formed during this small time. Because of the rapid process hydrogen formed more constituting the 74% and helium next constituted 23-24%. All other elements were gradually formed during stellar evolutions. But still now the constitution of nuclear matter remains the same.

So the unchanging ratio supports the Big Bang theory.

For more information regarding Big Bang theory, kindly refer

https://brainly.com/question/9382791

#SPJ4

what term is used to describe published studies that describe original experiments in science?

Answers

Since it focuses on measuring, analyzing, and testing hypotheses, primary literature descriptions of original study produced by the are occasionally referred to as empirical research.

What does scientific experimental evidence entail?

Observations made under controlled circumstances as opposed to through other forms of empirical study constitute experimental evidence. Researchers can deduce causes for a behavior they are studying thanks to experimental energy .

Which two sorts of experimental investigations are there?

True experiments and quasi-experimental designs are the two broad categories into which experimental research can be divided. Both designs call for the manipulation of the treatment; but, whereas real experiments also call for randomization, quasi-experiments do not.

To know more about energy visit :

https://brainly.com/question/2409175

#SPJ4

22. A dry climate causes weathering to take place ____.
A. At the same rate as when the climate is wet
B. More rapidly if it is cold
C. More rapidly than a wet climate
D. More slowly than wet climate

Answers

Weathering happens more gradually in a dry climate than in a wet one.

How does the weathering process depend on the climate?

The amount of rainfall and the temperature can influence how quickly rocks weather. The pace of chemical weathering is accelerated by high temperatures and heavier rainfall. 2. Compared to comparable rocks living in cold, dry climates, rocks in tropical regions exposed to heavy rainfall and high temperatures weather far more quickly.

What impact do cold and dry have on weathering?

The pace of weathering will be the slowest in a cold, dry climate. The rate of weathering will be fastest in an area with a warm, humid climate. A warmer environment will support a wider variety of vegetation, and biological weathering will occur more quickly.

To know more BOUT dry climate visit:-

https://brainly.com/question/1620119

#SPJ1

Which of the following was part of the Challenger’s goals for their mission into space?


to measure distances between satellites orbiting above Earth


to film a documentary segment


to conduct routine repairs on the International Space Station


to initiate contact back to mission control via new communication devices

Answers

Answer:

"To film a documentary segment"

Explanation:

For me its option D, but as the answers are listed here it would be option B. I just took the quiz and got this question right. Have a great day! C :

John throws a rock down with speed 14 m/s from the top of a 30-m tower. If g = 9. 8 m/s2 and air resistance is negligible, what is the rock's speed just as it hits the ground?.

Answers

We can use kinematic equations to solve this kind of problems. Here when the rock is thrown with an initial velocity of 14 m/s from a 30m high tower, the velocity with which the rock hits the ground is 28 m/s.

We can use the distance equation in kinematics to find the velocity when it reaches the ground.

v²-u² = 2aS

v is the final velocity

u is the initial velocity = 14m/s

a is the acceleration, here a= g = 9.8 m/s²

S is the distance travelled = 30 m

v² = u² + 2aS

v² = 14² + 2× 9.8× 30

v² = 784

v = √784 = 28 m/s

So the final velocity is 28 m/s.

For more information regarding the kinematic equations, kindly refer

https://brainly.com/question/28712225

#SPJ4

why did newton conclude that gravity has to be mutual and universal?

Answers

Newton concluded that gravity had to be mutual and universal because of his laws of motion. According to these laws, every action must have an equal and opposite reaction.

So, when an object attracts another object, the second object must also attract the first. This attraction must exist between all objects in the universe, thus making gravity mutual and universal.

Sir Isaac Newton's laws of motion, which were published in 1687, describe the motion of all objects in the universe.

The first law states that an object will remain at rest or move in a straight line unless an external force acts on it. The second law states that an object will accelerate when an external force acts on it.

From this, Newton concluded that if one object attracted another, then the second object must also be attracted to the first.

Therefore, Newton concluded that gravity was a mutual and universal force that acted between all objects in the universe.

He reasoned that since this force was mutual and acted on all objects, it must be the same force that kept the planets in orbit around the Sun.

This idea of universal gravity was revolutionary and changed the way people thought about the universe.

By demonstrating that all objects in the universe were subject to the same force, Newton showed that the universe was interconnected in a way that had never been seen before.

To know more about laws of motion,

https://brainly.com/question/28171613

#SPJ4

A particle moves in uniform circular motion with a radius of 3cm. The net force radially acting on the object is 30N. If the mass of the object is 6kg, find;
The centripetal acceleration
The particles linear speed
The acceleration if the radius is doubled with changing the particles speed

Answers

Answer:

a = V^2 / r        centripetal acceleration

a = F / m       given F (radial) = 30 N

1)      a = 30 N / 6 kg = 5 m/s^2        centripetal acceleration

2) V^2 = a r = 5 m/s^2 * .03 m = .15 m^2 / s^2

V = .39 m/s

3) I assume "with" should read "without"  otherwise the question can't be answered

a = V^2 / (2 * r)         if the radius is doubled then the acceleration is halved


During a race, the 48 kg runner accelerates from 5.1 m/s to 8.7 m/s to take the lead. What is the runner's change
in momentum?

Answers

Answer: the runner's change in momentum is 172.8 kg·m/s.

Explanation:

To find the change in momentum of the runner, we can use the equation:

change in momentum = mass x change in velocity

The mass of the runner is given as 48 kg, and the change in velocity can be calculated as:

change in velocity = final velocity - initial velocity

change in velocity = 8.7 m/s - 5.1 m/s

change in velocity = 3.6 m/s

Therefore, the change in momentum of the runner is:

change in momentum = mass x change in velocity

change in momentum = 48 kg x 3.6 m/s

change in momentum = 172.8 kg·m/s

So the runner's change in momentum is 172.8 kg·m/s.

What is a very long solid nonconducting cylinder of radius

Answers

A very long solid nonconducting cylinder of radius is a three dimensional object that is cylindrical in shape and has a very large length in comparison to its radius. 

The cylinder is made of a nonconducting material which means that it does not conduct electricity. This type of cylinder can be used in a variety of applications such as insulating materials or structural support.. The radius of the cylinder refers to the distance from the center of the cylinder to its outer edge. The larger the radius: the greater the volume of the cylinder.

This means that a larger radius cylinder would be more useful in applications where a greater amount of material is required.

Learn more about nonconducting cylinder brainly.com/question/14582654

#SPJ4

A small turbo-prop commuter airplane, starting from rest on a lansing airport runway, accelerates for 19. 0 s before taking off. Its speed at takeoff is 50. 0 m/s. Calculate the acceleration of the plane, in g's, assuming it remains constant.

Answers

The acceleration of the plane, assuming it remains constant, is 0.268 g's.

We can start by using the kinematic equation:

v = u + at

where:

v = final velocity = 50.0 m/s

u = initial velocity = 0 m/s (starting from rest)

a = acceleration

t = time = 19.0 s

Rearranging the equation to solve for acceleration:

a = (v - u) / t

a = (50.0 m/s - 0 m/s) / 19.0 s

a = 2.63 m/s²

To express the acceleration in units of g's, we can divide by the acceleration due to gravity:

a(g) = a / g

a(g) = 2.63 m/s² / 9.81 m/s²

a(g) = 0.268 g

Therefore, the acceleration of the plane, assuming it remains constant, is 0.268 g's.

Solve more problems on acceleration at : https://brainly.com/question/30499732

#SPJ4

Three objects having the same mass begin at the same height, and all move down the same vertical distance h. One falls straight down, one slides down a frictionless inclined plane, and one swings on the end of of a string.

Answers

The work completed should be comparable in all three circumstances.

The body's work is equal to mgH. (Gravitational potential energy).

Gravity and the normal force are both at work on a body descending a frictionless inclined plane. It won't make a difference to the gravitational potential energy.

The purpose of distance calculation

We can find out an object's actual size by knowing how far away it is. The area an object occupies in space above us can be measured. Once we know how far away it is, we can calculate its true size.

What is a distance?

Length is an item's general motion in a purposeless fashion. Distance can be thought of as the amount of space a thing has traveled since it first appeared.

To know more about Distance visit:

https://brainly.com/question/15172156

#SPJ4

Find the magnitude of the electrostatic force experienced by the positive charge.

Answers

The magnitude of the electrostatic force experienced by the positive charge is equal to the magnitude of the Coulomb force, which is given by F = k*|q1|*|q2|/r², where k is the Coulomb constant, q1 and q2 are the charges

What is the Coulomb ?

The Coulomb (symbol: C) is a unit of electric charge that is named after the French physicist Charles-Augustin de Coulomb. This unit is used to measure the magnitude of electric charge, electric potential, and electric field strength. It is equal to the charge of one electron, which is equal to 1.602 x 10-19 Coulombs of charge. The Coulomb is a fundamental unit in electrical engineering and physics and is used to calculate the force between two charged particles. It is also used to measure electrical capacitance and electric dipole moments.

To learn more about Coulomb

https://brainly.com/question/506926

#SPJ4

A 0. 36-kg block rests on a frictionless level surface and is attached to a horizontally aligned spring with a spring constant of 48 n/m. The block is initially displaced 5 cm from the equilibrium point and then released to set up a simple harmonic motion. A frictional force of 0. 3 n exists between the block and surface. What is the speed of the block when it passes through the equilibrium point after being released from the 5-cm displacement point?.

Answers

The block moves at a speed of 40 m/s2 when it reaches the equilibrium point after being freed from the 5-cm displacement point.

What time of year is spring?

Indian culture considers the months of March and April to be the start of spring, with an average high temperature of about 32 °C. Ugadi, the springtime celebration of some Indians, is notably popular in the state of Karnataka.

What makes springs crucial to physics?

Springs play a crucial role in many complex physical systems because they provide as straightforward models for them. As you continue studying physics, you will see SHM repeatedly as it describes how things that behave like springs behave. the spring constant being denoted by k.

To know more about Spring visit:

https://brainly.com/question/14670501

#SPJ4

Other Questions
On June 8, 2021, Holly purchased a residential apartment building. The cost basis assigned to the building is $256,250. Holly also owns another residential apartment building that she purchased on April 15, 2021, with a cost basis of $738.000 Which line best helps to develop a theme of the poem?Stopping By Woods on a Snowy Eveningby Robert Frost Whose woods these are I think I know. His house is in the village though; He will not see me stopping here To watch his woods fill up with snow.5 My little horse must think it queer To stop without a farmhouse near Between the woods and frozen lake The darkest evening of the year. He gives his harness bells a shake10 To ask if there is some mistake. The only other sound's the sweep Of easy wind and downy flake. The woods are lovely, dark and deep, But I have promises to keep,15 And miles to go before I sleep, And miles to go before I sleep. hello! can i get help with this asap In HW4 you created the schema (set of tables) for the database. These are simply empty tables. In this homework assignment you will create some mock data for your tables. You will need to use techniques from HW3 to complete this assignment. You must use PHP to generate your data and your data.sql file. You will need to provide a script that updates all the tables with data that you have generated. It would take hours (days?) for you to attempt to do this manually. Additionally, you must submit a short report (1-2) that details how you generated your data. You should think of generating the data as a mad libs type of scheme. You should could choose something like this for product description: A adjective in an adjective color made of useful for noun (material) noun verb An example for this would be A wonderf hammer in a ustr made plastic useful digging. For product descriptions you can simply use a format such as "A wonderful $productName for you to enjoy". But the concept still applies ... take a random first name and a random last name to create a random full name. You will randomly assign a street number, name, type, city, and state to create an address. Include any source code that you used to generate your data as well with your submission. Also include your schema.sql file with your submission. I should be able to run your schema.sql file, then your data.sql file and have a complete database populated with data. Test this before you submit! Rename your original database so you can save it, then use your scripts to create a new database to test your scripts. Part 1 - Create your data for your tables. I am reminding you of this step because I have received questions in previous homework assignments about this. You will need to start your SQL Server. (For windows users simply click the Start button from the XAMPP control panel). (For Linux Users type the command: sudo /opt/lampp/lampp start). At the end of this section of the homework you should have a single file called data.sql that contains all the scripts needed to populate your database tables. Part 1 - Create your data for your tables. I am reminding you of this step because I have received questions in previous homework assignments about this. You will need to start your SQL Server. (For windows users simply click the Start button from the XAMPP control panel). (For Linux Users type the command: sudo /opt/lampp/lampp start). At the end of this section of the homework you should have a single file called data.sql that contains all the scripts needed to populate your database tables. The following is a list of tables you should have created in HW4. The Primary keys are underlined bold, foreign keys are italics. 1. customer(customer_id, first_name, last_name, email, phone, address_id) 2. order(order id, customer_id, address_id) 3. product(product_id, product_name, description, weight, base_cost) 4. order_item (order_id, product_id, quantity, price) 5. address(address_id, street, city, state, zip) 6. warehouse(warehouse_id, name, ad ess_id) 7. product_warehouse(product_id, warehouse_id) For each table, here is how many records you need to generate. 1. customer - 100 2. order - 350 3. product - 750 4. order_item-550 5. address - 150 6. warehouse - 25 7. product_warehouse - 1250 There is a document in the slides folder that describes how to learn the syntax for SQL statements to insert data into an SQL table "Populating Tables with Data DBeaver.pptx". There are examples from the "code_examples" folder that demonstrate how to generate a data.sql file that inserts a series of actors (first and last names) into the moviestore4.actor table. The order that you insert into these tables is important. The short answer is this, you can't add a customer with an address_id until there is already an address with a matching address_id. ORDER TO INSERT DATA: 1. address 2. customer 3. order 4. product 5. warehouse 6. order_item 7. product_warhouse You can deviate from this order somewhat if you understand the implications. Part 2 - Create a PDF Report Create and submit a PDF report that briefly describes how you generated your data. This should include anything you feel that you did that was clever, as well as how you overcame any obstacles in this project Would you do things differently if you had to do this assignment again? What format did you decide to use for input text files (if you used them)? How did you input your values to generate random data? Would you have preferred to use Linux scripts and/or another scripting language to generate the SQL file? Part 3 - Deliverables for this assignment: 1) schema.sql 2) data.sql 3) any php files used to generate random data 4) any input files used to generate data 5) 1-2 page PDF report All files are detailed above in the assignment. ROP SCHEMA IF EXISTS SuperStore; what is walla walla community college You toss two dimes 24 times and record the results. Use the table to find the experimental probability of tossing two tails. What are some examples of vestigial structures? Which statement is true?A. There are more neurons than glia in the brain.B. Neurons are all the same shape and size.C. Some neurons have no axons.D. Glia are not necessary for normal brain functioning. If a tap drips at 0.15 litres per second,how long will it take to drip 30 litres Which two adjectives best describes Faith's behavior to her husband Young GoodmanBrown, as portrayed in this scene? (Choose two answers.)1.teasing2.scornful3.pleading4.suspicious5.obedient using equation explain what happens when hydrogen peroxide is added to lead which of these grist components is sometimes used because it is gluten free?a. Malted wheatb. Malted Sorghumc. Malted Barleyd. Malted Oats which legendary athlete won positive reviews for his singing role on broadway?a. Magic Johnsonb. Joe DiMaggioc. Joe Namathd. Muhammad Ali This weeks chapter of The Sports Gene focused on the "10,000 hours rule", or the idea that a person can become an elite athlete by deliberately practicing their sport over thousands of hours. The main example that was looked at was the case of high jumper, Stefan Holm, who is one of the top high jumpers in the world despite the disadvantage of having a shorter height. He started training from a very young age and follows a very specific training plan which has led him to success in the sport. Comparatively, the book looked at another high jumper, Donald Thomas, who picked up the sport later in life and was not as trained in the technicalities of high jumping.One of the distinguishing characteristics of the athletes that is interesting is the achilles tendon in each of them. When Holms achilles was studied, they found that it had become so stiff over time that it required quite a bit of force to bend it, making it act as a spring. This is a characteristic that was developed over time with training. Thomas, on the other hand had a very long achilles relative to his height which is something that cannot be developed over time. It is interesting to see how different characteristics of the achilles are beneficial for the same sport and that they are acquired in different ways.I dont believe that the 10,000 hour rule is relevant to all sports or to all people. In the case of Holm, it probably did apply to him due to him not being naturally built like most professional high jumpers. He was obviously very dedicated to the sport and putting in the deliberate practice is what helped him become successful. However, some people are naturally gifted athletes who can pick up a sport much more easily than the average person.Refer to one or more details from the text to support your understanding of what made Donald Thomas a successful high jumper? a boy on a skateboard pushes off the ground with his foot. he and the skateboard accelerate down the sidewalk due to the force the following statements are all true. which one counts as an exception to the rule in being unusual for our solar system?a. Venus does not have a moon.b. Jupiter has a very small axis tilt.c. The diameter of Earth's Moon is about 1/4 that of Earth.d. Saturn has no solid surface. A box contains cards, number 1 to 90. A card is drawn at random from the box. Find the probability that the selected card bears a:(i) Two-digit number.(ii) Perfect square number A 16-g ball at the end of a 1. 4-m string is swung in a horizontal circle. It revolves once every 1. 09 s. What is the magnitude of the string's tension?. It is solving for, the elimination tom works for a companyhis normal rate of pay is 15 per hour