HELPPPPP MEE

LATE SCIENCE WORK

If the axis is relocated on one of the sides, the inertial moment of a circular area about an axis going through its center of gravity is "(2)/(5)MR(2)".

I = ICM + MX2, where M is the body's mass and X is the separation between the axes, and I is the inertial moment about an axis passing through O. ICM is the inertia moment of the solid sphere of radius R about with an axis parallel towards the center of gravity.

a body's moment of inertia about an axis that is parallel to and passes through its which is created by multiplying the body's mass by the inverse of the separation between the two axis.

To know more about gravity visit :

https://brainly.com/question/14874038

#SPJ4

A. Object C has the largest mass, since it has the smallest acceleration. B. Object B has the smallest mass, since it has the largest acceleration. C. The ratio of mass A to mass B is: mA/mB = (force applied)/(7 m/s^2) / (force applied)/(4 m/s^2) = 7/4

We can use Newton's second law of motion, which states that the force applied to an object is equal to the mass of the object times its acceleration:

F = ma

where F is the force applied, m is the mass of the object, and a is its acceleration.

A. For object A, we have:

F = ma

m = F/a = (force applied)/(acceleration) = (constant force)/(7 m/s²)

For object B, we have:

F = ma

m = F/a = (force applied)/(acceleration) = (constant force)/(4 m/s²)

For object C, we have:

F = ma

m = F/a = (force applied)/(acceleration) = (constant force)/(2 m/s²)

Since the same force is applied to all objects, the object with the largest mass will have the smallest acceleration, and the object with the smallest mass will have the largest acceleration. Therefore, we can conclude that:

A. Object C has the largest mass, since it has the smallest acceleration.

B. Object B has the smallest mass, since it has the largest acceleration.

C. The ratio of mass A to mass B is:

mA/mB = (force applied)/(7 m/s²) / (force applied)/(4 m/s²) = 7/4

Learn more about Newton's second law of motion here brainly.com/question/27712854

#SPJ4

Complete Question: A constant force applied to object A causes it to accelerate at 7 m/s2. The same force applied to object B causes an acceleration of 4 m/s2. Applied to object C, it causes an acceleration of 2 m/s2.

A. Which object has the largest mass?B. Which object has the smallest mass?C. What is the ratio of mass A to mass B?

Based on the astronomers definition of stars, All stars are part of some constellation. Only the statement II is correct.

All stars visible from Earth are part of a constellation, which is a region of the sky defined by the International Astronomical Union (IAU). The IAU has divided the sky into 88 official constellations, each with its own boundaries and set of stars. Astronomers use the constellations as a way to locate and identify stars and other celestial objects in the night sky.

The brightness of a star is not necessarily related to its position or designation within a constellation, so the first statement is not correct. Also, the presence or absence of an Arabic name is not an indication of a star's brightness, so the third statement is not correct.

To know more about the constellations, here

brainly.com/question/18312623

#SPJ4

--The complete question is, Every star is part of a constellation and is assigned a Greek letter within the constellation. Many stars still bear ancient Arabic names. Based on how astronomers refer to stars, select all of the correct statements from the following list.

I The star in a constellation is usually brighter than the B star.

II All stars are part of some constellation.

III A star with an ancient Arabic name is probably relatively bright.--

The value of the mechanical advantage is 14.69."

To achieve the desired output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.

Mechanisms are machine parts made to control forces and motion in this way. An ideal transmission system does not increase or decrease power.

Mechanical advantage = F0 / Fi

                                       = 399.8/ 27.2

                                      =   14.69

Consequently, the ideal machine is devoid of a power source, frictionless, and built from inflexible materials that do not flex or wear. Efficiency factors that account for deviations from the ideal are used to represent how well a real system performs in comparison to the ideal.  Mechanical advantage = 399.8 / 27.2. The mechanical advantage is 14.69.

Therefore, The value of the mechanical advantage is 14.69."

To learn more about mechanical advantage, refer to the link:

https://brainly.com/question/16617083

#SPJ9

a. The expression for magnitude of this electric field assuming the electron is stationary, in terms of the mass me, charge e of the electron, and the gravitational acceleration g is E = m g/q.

b. Magnitude of electric field is calculated to be 5.59 × 10⁻¹¹ N/C.

c. The small value for this field implies that the gravitational and electrostatic interaction are relatively weak.

a. We know that, Fe = Fg

where,

Fe is electrostatic force

Fg is gravitational force

Fe = Fg

q E = m g

where,

q is charge

m is mass

E is electric field

g is gravity

So, the expression of electric field is E = m g/q

b. E = m g/q = (9.11× 10⁻³¹)(9.81)/(1.6 × 10⁻¹⁹) = 55.86 × 10⁻¹² N/C

c. The small value of electric field indicates that the force is relatively very weak between the gravitational and electrostatic interactions.

To know more about electrons:

https://brainly.com/question/12324569

#SPJ4

(a) The acceleration of the center of mass is 2F / 3M.

(b) The minimum coefficient of friction necessary to avoid slip is F / 3Mg.

The amount of matter that is contained in a substance or object is measured by its mass, which is a physical attribute of matter. Although the two are different amounts, they are frequently mistaken for weight. A recognized reference, such as a standard mass, can be used to compare an object's mass, which is expressed in kilograms (kg) or grams (g). Because the center of mass is an inherent quality of an object, it is unaffected by location or gravitational influence. A key component of explaining the behavior of moving objects, as well as the characteristics of materials and the dynamics of the cosmos, is the concept of mass, which is basic to physics.

(a) Taking moments about the center of mass, we have:

F(R/2) - f(R/2) = 0

Simplifying, we get: f = F

Therefore, the acceleration of the center of mass can be found using the equation: F - f = Ma

where M is the mass of the roller, and a is the acceleration of the center of mass.

Substituting f = F, we get: F - F = Ma

Simplifying, we get: a = 2F/3M

Therefore, the acceleration of the center of mass is 2F/3M.

(b) To avoid slipping, the frictional force f must be greater than or equal to the force required to cause slipping, which is given by:

Fs = μsN

where μs is the coefficient of static friction, and N is the normal force.

The normal force is equal to the weight of the roller, which is Mg, where g is the acceleration due to gravity.

Substituting f = F and N = Mg, we get:

F ≥ μsMg

Dividing both sides by 3M, we get:

F/3M ≥ μs g

Therefore, the minimum coefficient of friction required to avoid slipping is F/3Mg.

To know more about the center of mass, check out:

https://brainly.com/question/28134510

#SPJ4

If the vector below is multiplied by 2, option D will be its end point

If a vector is multiplied by 2, its end point will be scaled up by a factor of 2. So, if the original vector has end point (x,y), its end point after being multiplied by 2 will be (2x, 2y).

Given the vector below, its end point is (1,1):

^

|

|

|

|

---+--->

After being multiplied by 2, the end point of the vector will be (2 * 1, 2 * 1) = (2, 2), which corresponds to answer choice (D).

learn more about vector: https://brainly.com/question/25705666

#SPJ1

Using the principle of 'least count', the uncertainty on the each of your measurements (in both cm and in) 0.1 cm.

According to the concept of significant figures, the last digit is considered to be the uncertain digit in a measurement.  Significant figures are generally used for establishment  of a number which is presented in the form of digits. These digits give a lot of meaningful representation  to the numbers.

The significant figures are the most significant digits that convey the meaning according to the accuracy. These provide provides a proper precision to the numbers and hence are called as significant numbers. There are numerous rules for counting significant figures which are as follows:

1)All non-zero digits are significant.

2)All zeroes which essentially occur between non-zero digits are significant.

3)All zeroes to the left and right of any non-zero digit are not significant.

4) All zeroes on right  of decimal are significant if a non-zero number follows them.

5)All zeroes on right side of non-zero digit are significant.

Learn more about significant figures:

brainly.com/question/29153641

#SPJ4

The uncertainty on the length of the shoelace is 0.05 cm or 0.03125 in, depending on which unit is used.


The principle of least count states that the uncertainty in a measurement is equal to half the smallest division on the measuring tool. The ruler has two scales, one in centimeters and the other in inches.

The smallest division on the centimeter scale is 1 mm, which means the uncertainty is half of that, or 0.5 mm. Converting to centimeters, the uncertainty is 0.05 cm.

The smallest division on the inch scale is 1/16 inch, which means the uncertainty is half of that, or 1/32 inch. Converting to inches, the uncertainty is 0.03125 in.

Therefore, the uncertainty on the length of the shoelace is 0.05 cm or 0.03125 in, depending on which unit is used.

Learn more about physics here: brainly.com/question/28600368

#SPJ4

Chemical energy - Energy stored in the structure of a compound.

Electrostatic energy - Energy resulting from the interaction of charged particles.

Thermal energy - Energy associated with the random motion of atoms and molecules

Kinetic energy - Energy associated with the movement of an object.

Potential energy - Energy stored in an object due to its position are the definitions for various types of energy.

Thermal energy (also known as heat energy) is the energy generated by the movement of molecules in a substance. This energy is released when the molecules of a substance vibrate, move, and interact.

Examples of thermal energy include the heat generated from a campfire, the warmth of the sun, and the heat produced by an electric heater.

Types of thermal energy include:

1. Radiant energy: This type of thermal energy is created by the sun and other heat sources that emit electromagnetic radiation and is transferred through space.

2. Conduction energy: This type of thermal energy is created when two objects that have different temperatures come into contact, and heat is transferred from the hotter object to the cooler object.

3. Convection energy: This type of thermal energy is created when hot air rises and cold air falls, causing movement of the air and heat transfer.

4. Adiabatic energy: This type of thermal energy is created when a gas or liquid is compressed or expanded, and heat is transferred as a result of the change in pressure.

To know more about Thermal Energy, visit:

https://brainly.com/question/934320

#SPJ4

The expression for the magnitude of the net force on the car as it is stopping in terms of the symbols given in the problem statement is:

Fnet = (ms/2)d + ma.

The expression for the magnitude of the net force on the car as it is stopping can be found by considering the forces acting on the car. Let's assume that the car is moving to the right and is being stopped by a force acting to the left. According to Newton's second law of motion, the net force on an object is equal to the product of its mass and its acceleration. In this case, the car is slowing down, so its acceleration is negative (i.e., pointing to the left).

Let Fnet be the magnitude of the net force on the car, m be the mass of the car, and a be the acceleration of the car. The force IEF1 can be considered as an external force acting on the car. Therefore, we can write:

Fnet = IEF1 - ma

Substituting the given expression for IEF1 and the assumption that the acceleration is negative, we get:

Fnet = (ms/2)d - (-ma)

Simplifying the expression, we get:

Fnet = (ms/2)d + ma

Therefore, the expression for the magnitude of the net force on the car as it is stopping in terms of the symbols given in the problem statement is:

Fnet = (ms/2)d + ma

Here you can learn more about the magnitude

https://brainly.com/question/18506683

#SPJ4

Voltage across rheostat is equal to the current flowing through it multiplied by its resistance, according to Ohm's law. Since the current increases and the resistance decreases, the voltage across the rheostat will decrease.

In a series circuit consisting of two resistors and a rheostat, the total resistance of the circuit is equal to the sum of the individual resistances. The voltage across each component of the circuit is proportional to its resistance, according to Ohm's law.

If the resistance of the rheostat is decreased, the total resistance of the circuit decreases. Since the voltage of the power supply is fixed, the current flowing through the circuit must increase to maintain the same total power. This means that the voltage across the other components of the circuit, including the two fixed resistors, will increase.

The voltage across the rheostat is equal to the current flowing through it multiplied by its resistance, according to Ohm's law. Since the current increases and the resistance decreases, the voltage across the rheostat will decrease. This effect can be used to control the voltage and current in a circuit by adjusting the resistance of the rheostat.

Learn more about voltage here:

https://brainly.com/question/13521443

#SPJ4

The electric field on the surface of the rod is : [tex]\lambda / 2\epsilon_0[/tex]

To express the electric field on the surface of the rod in terms of lambda, we can use the definition of linear charge density, which is the amount of charge per unit length.

If the total charge on the rod is Q and its length is L, then we can write:

                                    [tex]\lambda = Q/L[/tex]

The total charge on the rod is also equal to the product of its linear charge density and length, i.e., [tex]Q = \lambda \times L.[/tex] Therefore, we can write:

[tex]E_{surface} = \rho r_0 / 2\epsilon0[/tex]

[tex]= (\lambda / \pi r_0^2) * \pi r0 / 2\epsilon_0 [using \rho = \lambda / \pi r_0^2]= \lambda / 2\epsilon_0[/tex]

Thus, we have expressed the electric field on the surface of the rod in terms of lambda, r0, and epsilon0.

This result shows that the electric field on the surface of the rod is proportional to the linear charge density of the rod and inversely proportional to the permittivity of free space.

Therefore, increasing the charge density of the rod or decreasing the permittivity of free space would result in a stronger electric field on the surface of the rod.

To know more about electric field visit:

brainly.com/question/14914962

#SPJ1

In contrast to data in a database, data in a data warehouse is described as subject-oriented, which means that it focuses on a specific area.

To know more about data warehouse, check out :

https://brainly.com/question/28427878

#SPJ1

The height of the cliff when the time taken to hear the sound is given is calculated to be 316.98 m.

Let us assume the height of the cliff to be h.

t is the time taken by the stone to reach the ground

Time taken to hear the sound is 9.3 s.

Time taken by the sound to reach the height of the cliff = 9.3 - t

Speed of sound in air is given as = 330 m/s

For the stone falling, the height is given by,

h = u t + 1/2 g t²

h = (0)t + 1/2 (9.81) t² = 4.905 t²

The distance travelled by the sound is,

d = s t

where,

s is speed

t is time

d = s t = 330 × (9.3 - t)

As the distance travelled by the stone and sound are equal,

4.905 t² = 330 × (9.3 - t)

4.905 t² = 3069 - 330t

4.905 t² + 330 t - 3069 = 0

The values of t are, t = 8.039, -75.318

As time cannot be negative, t = 8.039 s

The height of the cliff, h = 4.905 t² = 4.905(8.039)² = 316.98 m

Thus, the height of the cliff is calculated to be 316.98 m.

To know more about height:

https://brainly.com/question/13333518

#SPJ4

Bob can climb 2.68 m up the ladder before he slips.

Assume that the system is in equilibrium when the person is at the highest point L meters from the top of the ladder (measured along the ladder).

The force of friction:

f = μFn

The resultant normal force on the person;

N =  μFn = μ (F + W)

The torque around the lower end of the ladder;

Wcosθ(L/2) + Fcosθ(L - x) -  NLsinθ = 0

Substitute the value of the value of the normal force

Wcosθ(L/2) + Fcosθ(L - x) -  μ (F + W)Lsinθ = 0

where;

784 cos(60)( 10/2)  +  196 cos(60)(10 - x)  -  0.2(196 + 784) x 10 x sin(60) = 0

1960 +  980 - 98x   -  1,697.36 = 0

1,242.64 - 98x = 0

98x = 1,242.64

x = 1,242.64/98

x = 12.68

12.68 m - 10 m = 2.68 m

Learn more about slipping on ladder here: brainly.com/question/13652193

#SPJ1

Answer:

4000j

Explanation:

0.5 × 10^2 × 80 = 4kJ = 4000Joules

Constant velocity refers to the motion of an object that moves in a straight line with a constant speed, i.e., it covers equal distances in equal intervals of time.

Velocity is a vector quantity that has both magnitude (speed) and direction. So, an object moving with a constant velocity must maintain a constant speed and move in a straight line without changing its direction.

An example of an object moving with a constant velocity is a car driving on a long straight road without accelerating or changing its direction. Another example is a ball thrown horizontally with a constant speed, assuming air resistance is negligible.

An object with changing velocity is said to be accelerating, either by changing speed or direction. This means that an object moving with constant velocity has no net force acting upon it, as according to Newton's First Law of Motion, an object in motion will remain in motion with a constant velocity unless acted upon by a net force.

The reading on the spring scale when the boxcar is in motion indicates the tension force in the spring scale, which is equal to the net force acting on the attached mass. In this case, the only force acting on the mass is the tension force in the spring scale, since the mass rests on a smooth, horizontal surface and there is no other external force acting on it. Therefore,

[tex]T = m*a[/tex]

where T is the tension force, m is the mass, and a is the acceleration of the boxcar.

Substituting the given values,

[tex]50 N = (14.9 kg)*a[/tex]

Solving for a

[tex]a = 3.36 m/s^2[/tex]

Therefore, the acceleration of the boxcar when it is in motion is [tex]3.36 m/s^2[/tex].

When the boxcar is moving at a constant velocity, the acceleration is zero, which means the net force on the attached mass is also zero. Therefore, the reading on the spring scale would be zero in this case. So, the correct answer is  0 N.

To know more about Constant velocity, visit:

https://brainly.com/question/3052539

#SPJ4

Answer:

The energy of a photon (E) is related to its wavelength (λ) through the equation E = hc/λ, where h is Planck's constant and c is the speed of light.

To find the wavelength of light with a photon energy of 600 eV, we can rearrange the equation to solve for λ:

λ = hc/E

Plugging in the values of h, c, and E in electron volts (1 eV = 1.602 x 10^-19 J), we get:

λ = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (600 x 1.602 x 10^-19 J)

Simplifying, we get:

λ ≈ 2.06 x 10^-9 m or 2.06 nm

Therefore, the wavelength of light in which a photon has energy 600 eV is approximately 2.06 nm.

Answer:20.6 nm!!

Explanation:

Hope this helped you! :D

Tell me If I am wrong.

Also, could I have brainliest? :D

The statement: This is not possible; wave functions must always satisfy the time-independent Schroedinger equation is true.

One of the most fundamental equations in quantum mechanics is the Schrödinger equation. It is used to determine the likelihood of discovering a particle in a specific place or condition and defines how quantum particles behave and change over time. The equation is crucial to physics because it explains how atoms, molecules, and other tiny particles behave. It is used to forecast the behavior of quantum systems, including the behavior of subatomic particles, the electronic structure of atoms and molecules, and the characteristics of semiconductors and superconductors. For the creation of novel technologies like transistors, lasers, and quantum computers, the Schrödinger equation has been applied. In the contemporary world, its significance cannot be emphasized.

To know more about the Schroedinger equation, check out:

https://brainly.com/question/16977590

#SPJ4

The wave function of an electron in an atom does not satisfy the time-independent Schroedinger equation. which statement is true?

1. This is not possible; wave functions must always satisfy the time-independent Schroedinger equation.

2. The wave function is an energy eigenstate.

3. When the energy is measured, several different values have a non-zero probability.

None of the options would cause the most worry about the validity of this interval. Option e is the correct answer.

Option c would cause the most worry about the validity of the 95% confidence interval. This is because the confidence interval is calculated using the sample standard deviation and the t-distribution, assuming that the population standard deviation is unknown.

If the population standard deviation is significantly different from the sample standard deviation, the confidence interval may not accurately reflect the population mean. Therefore, options a, b, d, and e are not a problem for the validity of the interval.

To know more about the standard deviation, here

brainly.com/question/23907081

#SPJ4

--The complete question is, Scientists collect data on the blood cholesterol levels (milligrams per deciliter of blood) of a random sample of 25 laboratory rats. A 95% confidence interval for the mean blood cholesterol level μ is 80.2 to 89.8. Which of the following would cause the most worry about the validity of this interval?

a. There is a clear outlier in the data

b. A stem-plot of the data shows a mild right skew

c. You do not know the population standard deviation σ

d. The population distribution is not exactly Normal.

e. None of these are a problem when using t-interval--

At the top of the cylinder, there is a 0.5513-inch horizontal deflection.

To solve for the horizontal deflection at the top of the cylinder,

d = (FL^3)/(3E*I)

where, d = deflection at the end of the beam

F = concentrated load

L = length of the beam

E = modulus of elasticity

I = moment of inertia

D = diameter of the cylinder (D = 2*h = 40 in)

Moment of inertia is,

I = (pi/4)*D^4

I = (pi/4)*D^4 = 62,831.8537 in^4

Length of beam is,

[tex]L = \sqrt{d^2 + h^2}\\\\ = \sqrt{(18)^2 + (20)^2}\\\\ = 27.3861 in[/tex]

Horizontal deflection,

[tex]d = \dfrac{FL^3}{3EI}\\ = \dfrac{8000 \times 27.3861^3}{3\times (1.00)\times 62,831.8537}\\\\ = 0.5513[/tex]

Therefore, the horizontal deflection at the top of the cylinder is approximately 0.5513 inches.

To know more about the horizontal deflection, here

brainly.com/question/30321648

#SPJ4

The thermal efficiencies of the two cycles are the same.

The thermal efficiency of the two cycles can be calculated using the following equation:

η = [tex]1 - (\frac{T2}{T1})[/tex]

where T1 is the temperature at the turbine inlet and T2 is the temperature at the condenser exit.

For the simple ideal Rankine cycle, the temperature at the turbine inlet is 638 K and the temperature at the condenser exit is 328 K. Therefore, the thermal efficiency of the cycle is:

η =

[tex]1 - (\frac{328}{638}) \\ = 0.4877 or 48.77\%.[/tex]

For the Carnot cycle, the temperature at the boiler inlet is 328 K and the temperature at the turbine inlet is 638 K. Therefore, the thermal efficiency of the cycle is:

η =

[tex]1 - (\frac{328}{638}) \\ = 0.4877 or 48.77\%.[/tex]

Therefore, the thermal efficiencies of the two cycles are the same.

The T-s diagrams of the two cycles can be seen below.

Learn more about thermal efficiency here:

brainly.com/question/21286288

#SPJ4

The correct answer is option A: Kinetic Energy -> Mechanical Energy -> Electric Energy.

Wind energy is a form of kinetic energy, which is the energy of motion. When the wind blows, it causes the blades of a wind turbine to rotate. This rotation converts the kinetic energy of the wind into mechanical energy. The mechanical energy is then used to turn a generator, which converts the mechanical energy into electric energy. This electric energy can then be used to power homes and businesses.

In summary, the sequence of energy conversions that occur in a wind turbine is as follows:
1. Kinetic Energy (from the wind)
2. Mechanical Energy (from the rotation of the turbine blades)
3. Electric Energy (from the generator)

Therefore, the correct sequence of energy conversions that occur in a wind turbine is option A: Kinetic Energy -> Mechanical Energy -> Electric Energy.

To know more about electric energy, refer here:

https://brainly.com/question/1580875#

#SPJ11

We can use Coulomb's law to calculate the net force on q3 due to q1 and q2, and then take the x-component of that net force.

The force on q3 due to q1 is given by:

F1 = k * (q1 * q3) / r1^2

where k is Coulomb's constant, q1 is the charge on q1, q3 is the charge on q3, and r1 is the distance between q1 and q3.

Similarly, the force on q3 due to q2 is given by:

F2 = k * (q2 * q3) / r2^2

where q2 is the charge on q2, and r2 is the distance between q2 and q3.

The net force on q3 is the vector sum of F1 and F2:

Fnet3 = F1 + F2

Fnet3,x = F1,x + F2,x

= (F1 * cos(theta1)) + (F2 * cos(theta2))

where theta1 is the angle between F1 and the x-axis, and theta2 is the angle between F2 and the x-axis.

The distances r1 and r2 can be calculated using the distance formula:

r1 = sqrt((X3 - X1)^2 + Y1^2)

r2 = sqrt((X3 - X2)^2 + Y2^2)

where X1 and X2 are the x-coordinates of q1 and q2, Y1 and Y2 are their y-coordinates, and X3 is the x-coordinate of q3.

Plugging in the given values, we get:

r1 = sqrt((-1.195 m - 0.250 m)^2 + 0^2) = 0.945 m

r2 = sqrt((-1.195 m + 0.250 m)^2 + 0^2) = 1.195 m

cos(theta1) = 1/sqrt(2)

cos(theta2) = -1/sqrt(2)

F1 = (9.0 x 10^9 Nm^2/C^2) * (-2.40 nC * 51.0 nC) / (0.945 m)^2 = -2.275 x 10^-4 N

F2 = (9.0 x 10^9 Nm^2/C^2) * (3.60 nC * 51.0 nC) / (1.195 m)^2 = 1.482 x 10^-4 N

Fnet3,x = (F1 * cos(theta1)) + (F2 * cos(theta2))

= (-2.275 x 10^-4 N * 1/sqrt(2)) + (1.482 x 10^-4 N * -1/sqrt(2))

= -3.98 x 10^-5 N

Therefore, the x-component of the net force on q3 is -3.98 x 10^-5 N.

To know more about coulomb's law , check out:

https://brainly.com/question/506926

#SPJ4

We can use the equations of kinematics to solve this problem. The initial velocity of the fish relative to the eagle is the same as the eagle's velocity, which is 2.8 m/s. The final velocity of the fish just before it hits the water .

v_f^2 = v_i^2 + 2gh

v_f^2 = (2.8 m/s)^2 + 2(9.8 m/s^2)(4.8 m) ≈ 83.2 m^2/s^2

Taking the square root of both sides, we get:

v_f ≈ 9.1 m/s

v_x = v_i = 2.8 m/s

We can find the vertical component of the velocity (v_y) using the equation:

v_f^2 = v_x^2 + v_y^2

Substituting the values we have found, we get:

(9.1 m/s)^2 = (2.8 m/s)^2 + v_y^2

Solving for v_y, we get:

v_y ≈ 8.4 m/s

θ= tan^(-1)(v_y/v_x)

Substituting the values we have found, we get:

θ = tan^(-1)(8.4 m/s / 2.8 m/s) ≈ 72.6°

Therefore, the angle at which the fish's velocity is directed below the horizontal when the fish hits the water is approximately 72.6 degrees.

To know more about equation of kinematics , check out :

https://brainly.com/question/24458315

#SPJ4

The normal 110-volt household alternating current has a frequency of 60 Hz and ranges from +155 V to -155 V. (cycles per second).

The periodic direction change in the flow of electricity is referred to as alternating current. The voltage level consequently reverses as well as the current. To supply electricity to homes, offices, etc., AC is employed.

Each appliance can be turned on and off separately when linked in a parallel configuration. This is a quality that every home's wiring must have. Each appliance receives a rating.

To know more about electricity visit :

https://brainly.com/question/8971780

#SPJ4

The stress in concrete due to compressive load of 18 kips, is 6.23 MPa and stress in steel is 50.32 MPa.

For a composite bar:

1) The sum of compressive forces in each bar is equal to the total compressive force.

2) The deformation of each bar is same.

Let P₁ be the load in steel and P₂ be the load in concrete.

Then,

P₁ + P₂ = 18 kips

The inner diameter is 2.75 in.

Outer diameter is 3.125 in.

Now deformation in both concrete and steel is same:

[tex]\dfrac{P_1L}{A_1E_1} = \dfrac{P_2L}{A_2E_2}[/tex]

[tex]\dfrac{P_1}{\dfrac{\pi}{4} ((3.125)^2- (2.75)^2) \times 29 \times 10^3} = \dfrac{P_2}{\dfrac{\pi}{4} (2.75)^2 \times 3.6 \times 10^3}[/tex]

[tex]\dfrac{P_1}{P_2} = 2.346[/tex]

Solving the two equations,

[tex]P_2 = 5.37\ kips[/tex]

[tex]P_1 = 12.63\ kips[/tex]

Therefore stress in concrete,

[tex]\dfrac{5.37}{\dfrac{\pi}{4} (2.75)^2}[/tex] = 6.23 MPa

Therefore stress in steel,

[tex]\dfrac{12.63}{\dfrac{\pi}{4} ((3.125)^2- (2.75)^2)}[/tex] = 50.32 MPa

To know more about the stress, here

brainly.com/question/25632718

#SPJ4

--The complete question is, The steel pipe is filled with concrete and sub- jected to a compressive load of 18 kips. Determine the average normal stress in the concrete and the steel due to this loading. The pipe has an outer diameter of 3.125 in. and an inner diameter of 2.75 in. Est = 29(10^3) ksi, Ec = 3.6(10^3) ksi.--

We can use the wave equation for a vibrating string to relate the tension in the string to its frequency and other properties:

f = (1/2L) * sqrt(T/μ)

T = (4L^2 * μ * f^2)

Plugging in the given values, we get:

L = 1.90 mm = 0.00190 m

μ = (mass/length) = 400 g / 2.00 mm = 200 g/m = 0.200 kg/m

f = 27.5 Hz

T = (4 * 0.00190^2 * 0.200 * 27.5^2) = 24.4 N

Therefore, a tension of 24.4 N is needed to tune this string properly.

To know more about wave equation , check out :

https://brainly.com/question/25699025

#SPJ4

Considering the information from bubble 1 and bubble 2, the magnitude of F1-2 compares to F2-1 because the two forces have the same magnitude. Option B is correct.

This concept can be explained by physics through Coulomb's Law, which states that the electrostatic interaction between two particles occurs the greater the magnitude of the charges and the smaller the distance between the particles, the greater the force of attraction or repulsion between the charges.

Therefore, through Coulomb's Law we can understand the interaction between charged particles and the forces exerted by them that will be equal in magnitude and opposite in direction, making the magnitude of F1-2 equal to the force F2-1.

Find out more about Coulomb's Law on:

https://brainly.com/question/506926

#SPJ1

The first statement of Kepler's first law is: "The orbit of every planet is an ellipse with the Sun at one of the two foci."

Kepler's first law is one of three laws that describe the motion of planets around the sun. It states that the path of each planet is an ellipse, a geometric shape that looks like a stretched circle, with the sun at one of the two foci of the ellipse. This means that the distance between the planet and the sun changes as the planet moves along its elliptical path, with the closest point being the perihelion and the farthest point being the aphelion. This law helps to explain the differences in the planet's distances from the sun at different times during its orbit.

Learn more about Kepler's law here: brainly.com/question/1608361

#SPJ4