HELP PLEASE
The members of a bowling team score from 159 to 221. Their average score is 172. A
new member with an outlyng score of 279 joins the team.

Which statement describes how the new member's score will affect center and spread of the bowling team?

The new member's score will decrease the center and spread of the bowling team.

The new member's score will decrease the center but increase the spread of the bowling team.

The new member's score will increase the center and spread of the bowling team.

The new member's score will increase the center but decrease the spread of the bowling team.

Answer: The area of the circle that passes through the three vertices of the isosceles triangle is (3sqrt(2))/2 pi square units.

Step-by-step explanation:

Since the circle passes through the three vertices of the isosceles triangle, the center of the circle must be the midpoint of the base of the triangle. Let's call this point O.

Let's draw a perpendicular from O to the midpoint of the third side of the triangle. This will bisect the base and form two right triangles. Let's call the height of each of these triangles h.

Since the isosceles triangle has two sides of length 3, we can use the Pythagorean theorem to find h:

h^2 + (3/2)^2 = 3^2

h^2 + 9/4 = 9

h^2 = 9 - 9/4

h^2 = 27/4

h = sqrt(27)/2 = (3sqrt(3))/2

Now, we know that the radius of the circle is equal to the distance from O to any of the vertices of the triangle. Let's call this distance r.

From the right triangle, we know that r^2 + h^2 = (2/2)^2 = 1

r^2 = 1 - h^2

r^2 = 1 - (27/4)

r^2 = -23/4

Since r is the distance from the center of the circle to a point on the circle, it must be positive. However, we see that r^2 is negative, which is impossible. Therefore, the circle cannot exist.

Since it is impossible for the circle to exist, we cannot find its area.

The solar incident angle for a south-east facing window of a building located in Pittsburgh, PA at 10:00 AM on January 20th is approximately 60.3 degrees.

To calculate the solar incident angle for a specific date and time, we need to know the latitude and longitude of the building, as well as the position of the sun in the sky.

The latitude and longitude of Pittsburgh, PA, are approximately 40.44 degrees North and 79.99 degrees West, respectively.

Using these coordinates, we can find the solar position using software or online tools.

Assuming a standard time zone (Eastern Standard Time), the solar incident angle for the window facing southeast (45 degrees from both south and east) at 10:00 AM on January 20th is approximately 60.3 degrees.

Note that the solar incident angle depends on many factors, such as the latitude and longitude of the building, the orientation and tilt of the window, the time of day, and the season.

The above calculation is based on the assumptions made and the specific conditions mentioned in the question.

For similar question on incident angle.

https://brainly.com/question/31019139

#SPJ11

The z-score of 0.3162 is less than 2.33, we fail to reject the null hypothesis. There is not enough evidence to conclude that the valve performs above the specifications.

The null hypothesis is that the valve produces a mean pressure of 5.5 pounds/square inch. The alternative hypothesis is that the valve produces a mean pressure greater than 5.5 pounds/square inch.
The decision rule for rejecting the null hypothesis at a significance level of 0.01 is to reject it if the test statistic (z-score) is greater than 2.33.
To calculate the z-score, we use the formula:
z = (sample mean - hypothesized mean) / (standard deviation / sqrt(sample size))
z = (5.6 - 5.5) / (0.8 / sqrt(18))
z = 0.3162
Since the z-score of 0.3162 is less than 2.33, we fail to reject the null hypothesis. There is not enough evidence to conclude that the valve performs above the specifications.

Learn more about hypothesis here

https://brainly.com/question/606806

#SPJ11

When you draw a sample of stores and measure sales of your new brand, increasing the sample size will generally have a positive impact on the accuracy of the sample mean and the variance of the mean.

As the sample size increases, the sample mean will tend to converge towards the true population mean, resulting in a more accurate representation of the overall sales performance of your new brand. This phenomenon is known as the Law of Large Numbers.

Furthermore, increasing the sample size will reduce the variance of the mean, meaning that the variability of the sample mean around the true population mean will decrease. This is because larger sample sizes provide more data points, which helps to reduce random errors and improve the precision of your estimates.

In summary, increasing the sample size when measuring sales of your new brand will lead to a more accurate and reliable sample mean, as well as a reduction in the variance of the mean, ultimately allowing for better decision-making and evaluation of your brand's performance.

To learn more about population mean click here

brainly.com/question/30727743

#SPJ11

Let's denote the initial amount of water in Melissa's fish tank as 'x' liters.

Melissa plans to add 'y' liters per minute until the tank has more than 'z' liters.

Based on the given information, we can set up the following inequality:

x + y * t > z

where 't' represents the number of minutes Melissa adds water.

To find the possible values of 't', we need to solve for 't' in terms of 'x', 'y', and 'z'.

t > (z - x) / y

Therefore, the possible numbers of minutes Melissa could add water are t > (z - x) / y, where (z - x) / y represents the time it takes for the tank to reach the desired amount of water 'z' given the rate of water addition 'y' per minute.

To know more about initial amount refer here

https://brainly.com/question/32209767#

#SPJ11

The birth weight at the 70th percentile is about 3.156 ounces, and the birth weight at the 30th percentile is about 2.844 ounces.

To find the birth weights at the 70th and 30th percentiles, we'll use the properties of a normal distribution, the given mean (3 ounces), and the standard deviation (0.3 ounce).

a. To find the birth weight at the 70th percentile, we first need to find the corresponding z-score, which represents how many standard deviations above or below the mean a value is. Using a z-score table or calculator, we find that the z-score for the 70th percentile is approximately 0.52. Now, we can use the formula:

Weight at 70th percentile = Mean + (Z-score * Standard deviation)
Weight at 70th percentile = 3 + (0.52 * 0.3) ≈ 3.156 ounces

b. To find the birth weight at the 30th percentile, we find the corresponding z-score, which is approximately -0.52. Using the same formula as above:

Weight at 30th percentile = Mean + (Z-score * Standard deviation)
Weight at 30th percentile = 3 + (-0.52 * 0.3) ≈ 2.844 ounces

To learn more about standard deviations click here

brainly.com/question/23907081

#SPJ11

The statement "the sampling distribution of the difference between the two sample means will have a mean of one" is not necessarily true, and neither is the statement "will have a variance of one" or "can be approximated by any distribution."

The sampling distribution of the difference between two sample means from independent populations will have a mean equal to the difference between the population means. However, the variance of the sampling distribution will depend on the sample sizes and the variances of the two populations.

If the sample sizes are large enough (usually considered to be greater than or equal to 30) and the population variances are known or assumed to be equal, then the sampling distribution of the difference between two sample means can be approximated by a normal distribution.

Therefore, the statement "the sampling distribution of the difference between the two sample means will have a mean of one" is not necessarily true, and neither is the statement "will have a variance of one" or "can be approximated by any distribution." However, the statement "can be approximated by a normal distribution" is generally true if the sample sizes are large enough and the population variances are known or assumed to be equal.

for such more question on sampling distribution

https://brainly.com/question/15713806

#SPJ11

The rocket is rising at a rate of [tex]\sqrt{(41)}[/tex]/ 2000 miles/hr when it is 4 miles high using Pythagorean theorem.

To solve this problem, we can use the Pythagorean theorem to find the distance between the rocket and the radar station at a height of 4 miles:

[tex]d^2 = (5 miles)^2 + (4 miles)^2[/tex]
[tex]d^2[/tex] = 25 + 16
[tex]d^2[/tex] = 41
d = [tex]\sqrt{(41)}[/tex] miles

Now we can use the chain rule to find the rate of change of the rocket's height with respect to time:

dh/dt = dh/dd * dd/dt

We know that dd/dt = 2000 mi/hr, so we just need to find dh/dd:

[tex]d^2 = x^2 + h^2[/tex]
2dd/dd = 2x dx/dd + 2h dh/dd
0 = x dx/dd + h dh/dd
dh/dd = -x/dx/dd

At a height of 4 miles, x is the distance from the rocket to the radar station, which we just found to be sqrt(41) miles. dx/dd is the rate of change of this distance, which is just -2000 mi/hr (since the distance is increasing). Therefore:

dh/dd = -[tex]\sqrt{(41)}[/tex] / (-2000) = [tex]\sqrt{(41)}[/tex] / 2000 miles/hr

So the rocket is rising at a rate of sqrt(41) / 2000 miles/hr when it is 4 miles high.

To learn more about Pythogorean theorem, refer here:

https://brainly.com/question/26755183#

#SPJ11

The statement A confidence interval for proportions is used to estimate the population proportion not the sample proportion is true.

A confidence interval for proportions is a statistical tool used to estimate the range of values within which the population proportion is likely to lie. It is calculated based on the sample proportion, sample size, and a specified level of confidence.

The sample proportion is only used as a point estimate of the population proportion, but the confidence interval takes into account the variability of the sample proportion and provides a range of values that are likely to include the population proportion with a certain level of confidence.

for such more question on confidence interval

https://brainly.com/question/14771284

#SPJ11

Isle Royale, a remote island in Lake Superior, has been a popular location for wildlife studies for decades. One of the most well-known studies is the wolf-moose project, which examines the relationship between wolves and their primary prey, moose. Over the years, the wolf population on the island has fluctuated, with some years having many wolves and others having very few. This has allowed researchers to study the effects of wolf predation on the moose population.
When there are no wolves on Isle Royale, the moose population is left to grow unchecked, and they can become overabundant. Without natural predators, moose can become complacent and may not have to work as hard to find food. This can lead to a decrease in the average fat stores of individual moose, as they are not motivated to build up their energy reserves.

In conclusion, the presence of wolves on Isle Royale has a significant impact on the average fat stores of moose. When wolves are present, the moose population is healthier and more robust, with higher levels of energy reserves.

Learn more about Isle Royale here: brainly.com/question/13242432

#SPJ11

The function f(x) has a relative minimum at x = 1/7 and a relative maximum at x = 0.To find where the function f(x) = 33° - 873 – 210.x2 + 4 is increasing and decreasing, we need to analyze its derivative function, f'(x), which is equal to 12x(1 - 7x). To determine where f'(x) is positive or negative, we use the VD Test and consider the signs of the factors 12, 1 - 7x, and x.

We first find the critical numbers by solving f'(x) = 0:

12x(1 - 7x) = 0
x = 0 or x = 1/7

These critical numbers divide the real line into three intervals: (-∞, 0), (0, 1/7), and (1/7, ∞). We then test a value from each interval in f'(x) to determine its sign:

f'(-1) = 12(-1)(1 + 7) = -96  (negative)
f'(1/14) = 12(1/14)(1 - 1) = 0  (zero)
f'(2) = 12(2)(1 - 14) = -240  (negative)

Using this information, we can construct a chart:

Interval | Test Value | 12 | 1-7x | x | f'(x)
-----------------------------------------------------
(-∞, 0) | -1 | - | - | - | -
(0, 1/7) | 1/14 | + | + | + | Increasing
(1/7, ∞) | 2 | + | - | + | Decreasing

Based on the chart, we can see that f(x) is increasing on the interval (0, 1/7) and decreasing on the interval (1/7, ∞). Therefore, we can conclude that the function f(x) has a relative minimum at x = 1/7 and a relative maximum at x = 0.

learn more about derivative function here: brainly.com/question/29424308

#SPJ11

The statement 'Random selection of subjects and random assignment to treatment conditions are not necessarily sufficient to confirm that findings can be generalized, despite the fact that they are usually necessary for external validity' is True.

Random selection of subjects and random assignment to treatment conditions are necessary for external validity, but they are not sufficient to confirm that findings can be generalized.

To ensure that findings can be generalized, it is important to consider factors such as the representativeness of the sample, the similarity of the study setting to real-world settings, and the consistency of the findings with existing research.

Additionally, the size and diversity of the sample, as well as the rigor of the study design and analysis, can all affect the generalizability of findings.

for such more question on external validity

https://brainly.com/question/13509401

#SPJ11

The probability of Delta Airlines receiving no complaints can be calculated using the Poisson distribution formula, where lambda (average number of complaints per day) is 2.5 and x (number of complaints) is 0. The formula is P(x=0) = e^(-lambda) * lambda^x / x!. Substituting the values, we get P(x=0) = e^(-2.5) * 2.5^0 / 0! = e^(-2.5) = 0.082. Therefore, the probability of Delta Airlines receiving no complaints on a given day is 0.082 or 8.2%.

The Poisson distribution is used to calculate the probability of a certain number of events occurring in a fixed time interval when the events are rare and random. In this case, we are given that the average number of complaints received by Delta Airlines per day is 2.5. The probability of receiving no complaints can be calculated using the Poisson distribution formula as described above. The formula takes into account the average number of complaints and calculates the probability of receiving a specific number of complaints on a given day.

The probability of Delta Airlines receiving no complaints on a given day is 8.2%. This means that there is an 8.2% chance that on any given day, Delta Airlines will not receive any complaints. The Poisson distribution formula can be used to calculate the probability of rare and random events occurring, and it takes into account the average number of events that occur in a fixed time interval.

To know more about Poisson distribution visit:

https://brainly.com/question/17280826

#SPJ11

By incorporating this information into the similarity measure, we can produce more accurate and informative results in clustering and classification tasks.

To modify the definition of clustering similarity to take into account the position of shared neighbors in the two nearest neighbor lists, we can introduce a weighting factor that considers the rank of the shared neighbor in each list. This can be achieved by multiplying the regular SNN similarity value by a weight factor that is calculated as the reciprocal of the sum of the ranks of the shared neighbors in the two lists. For example, if two points have a shared neighbor that is ranked 2nd in one list and 3rd in the other list, the weight factor would be 1/(2+3) = 0.2. This weight factor would then be multiplied by the regular SNN similarity value to produce a modified SNN similarity score that gives higher similarity to points that share the same nearest neighbors ranked higher in the nearest neighbor lists. This modification is justified because it takes into account the fact that having shared neighbors that are ranked higher in the nearest neighbor lists is a stronger indicator of similarity than having shared neighbors that are ranked lower.

Learn more about clustering here

https://brainly.com/question/29888905

#SPJ11

Answer: 7

Step-by-step explanation:

We can conclude that det a = 12 means that the linear transformation t stretches shapes in R2 by a factor of 12 without reflecting them.

We can start by writing out the matrix representation of the linear transformation t, which is given by:

[t(v1) t(v2)] = [3v1 4v2] = [3 0; 0 4][v1 v2]

Here, we have used the fact that t is a linear transformation, which means that it can be represented by a matrix. The matrix [3 0; 0 4] is the matrix representation of t with respect to the standard basis of R2.

Now, we can use the formula for the determinant of a 2x2 matrix to find det a:

det a = ad - bc

where a, b, c, and d are the entries of the matrix a. In this case, we have:

a = 3, b = 0, c = 0, and d = 4

Plugging these values into the formula, we get:

det a = (3)(4) - (0)(0) = 12

So, we can say that det a = 12.

To justify this answer, we can use the fact that the determinant of a matrix represents the factor by which the matrix scales the area of any given shape in R2. Since det a is positive (since it is the product of two positive numbers), we know that the linear transformation represented by a preserves orientation (i.e., it does not reflect shapes). Furthermore, since det a is greater than 1, we know that the transformation stretches shapes by a factor of det a. Specifically, any shape in R2 that has area A under the transformation t will have area det a * A after the transformation. In this case, since det a = 12, we know that t stretches shapes by a factor of 12.

Know more about linear transformation here;

https://brainly.com/question/30514241

#SPJ11

The probability that the driver has no accidents in the next 365 days, but then has at least one accident in the 365-day period that follows this initial 365-day period, is approximately 0.204.

Let X be the time until the next accident for the driver. We know that X is exponentially distributed with a mean of 200 days, which means that its probability density function (PDF) is:

[tex]$f(x) = \frac{1}{200} e^{-\frac{x}{200}} \text{ for } x > 0$[/tex]

We want to calculate the probability that the driver has no accidents in the next 365 days (i.e., from day 0 to day 365), but then has at least one accident in the 365-day period that follows (i.e., from day 366 to day 730). We can express this probability as:

P(no accidents in first 365 days) * P(at least one accident in next 365 days | no accidents in first 365 days)

The probability of having no accidents in the first 365 days is simply the cumulative distribution function (CDF) of X evaluated at x = 365:

[tex]$F(365) = \int_{0}^{365} f(x) dx = 1 - e^{-\frac{365}{200}} \approx 0.451$[/tex]

The probability of having at least one accident in the next 365 days, given that there were no accidents in the first 365 days, can be calculated using the memoryless property of the exponential distribution:

P(at least one accident in next 365 days | no accidents in first 365 days) = P(X < 365) = F(365) ≈ 0.451

Therefore, the probability we are interested in is:

P(no accidents in first 365 days) * P(at least one accident in next 365 days | no accidents in first 365 days)

= 0.451 * 0.451 ≈ 0.204

To learn more about probability

https://brainly.com/question/30034780

#SPJ4

They are both the points on the sphere that are farthest from the point (1, -1, 1).To find the point on the sphere x^2 + y^2 + z^2 = 4 that is farthest from the point (1, -1, 1), we need to first find the center of the sphere.

The center of the sphere is the origin (0, 0, 0) since the equation is in the form x^2 + y^2 + z^2 = r^2 where r is the radius, and r is equal to 2 in this case.

Next, we need to find the vector that connects the center of the sphere to the point (1, -1, 1). This vector is given by (1, -1, 1) - (0, 0, 0) = (1, -1, 1).

To find the point on the sphere that is farthest from the point (1, -1, 1), we need to find the point on the sphere where the vector from the center of the sphere to that point is orthogonal (perpendicular) to the vector that connects the center of the sphere to the point (1, -1, 1).

Since the center of the sphere is the origin, the vector from the center of the sphere to the point we're looking for is simply a scalar multiple of the vector (1, -1, 1).

Let the point we're looking for be (x, y, z). Then, the vector from the center of the sphere to that point is given by (x, y, z), and we need to find a scalar k such that (x, y, z) dot (1, -1, 1) = k * (1, -1, 1) dot (1, -1, 1), where "dot" represents the dot product.

Expanding this equation, we get x - y + z = k * 3.

Since the point (x, y, z) is on the sphere x^2 + y^2 + z^2 = 4, we also have x^2 + y^2 + z^2 = 4.

Substituting x - y + z = k * 3 into x^2 + y^2 + z^2 = 4, we get (k * 3)^2 + 2y^2 = 4.

Solving for y, we get y = +/- sqrt((4 - 9k^2)/2).

Since we want the point on the sphere that is farthest from the point (1, -1, 1), we want the value of k that maximizes the distance between the point (1, -1, 1) and the point (x, y, z) on the sphere.

The distance between two points (x1, y1, z1) and (x2, y2, z2) is given by the formula sqrt((x2 - x1)^2 + (y2 - y1)^2 + (z2 - z1)^2).

Substituting in our values, we get the distance between the points as sqrt((x - 1)^2 + (y + 1)^2 + (z - 1)^2).

To maximize this distance, we want to minimize the square of the distance, which is given by (x - 1)^2 + (y + 1)^2 + (z - 1)^2.

Substituting in our values for y and simplifying, we get (x - 1)^2 + (4 - 9k^2)/2 + (z - 1)^2 = 9k^2/2 - 3.

Since x^2 + y^2 + z^2 = 4, we also have x^2 + (4 - 9k^2)/2 + z^2 = 4.

Substituting in our value for y, we get x^2 + (4 - 9k^2)/2 + z^2 = 4 - (9k^2/2).

Simplifying, we get x^2 + z^2 = 9/2 - (5k^2/2).

Since we want to maximize the distance between the point on the sphere and the point (1, -1, 1), we want to minimize the value of k^2.

The minimum value of k^2 occurs when y = 0, which means that x - y + z = 0.

Substituting in x^2 + y^2 + z^2 = 4, we get x^2 + z^2 = 2.

To find the point on the sphere that is farthest from the point (1, -1, 1), we need to solve the system of equations x - y + z = 0, x^2 + z^2 = 2.

Solving for x, y, and z, we get (x, y, z) = (sqrt(2)/2, -sqrt(2)/2, sqrt(2)/2) or (-sqrt(2)/2, sqrt(2)/2, -sqrt(2)/2).

Since both of these points are equidistant from the point (1, -1, 1), they are both the points on the sphere that are farthest from the point (1, -1, 1).

learn more about Sphere here: brainly.com/question/10171109

#SPJ11

The solution of the function, f( )  = -8 is f(1) = -8.

A function relates input to output. A function assigns exactly one output to each input of a specified type.

In other words, a function is a relationship between two or more variables, such that each input has only one output.

Therefore, let's solve the function as follows:

f(x) = -7x - 1

Hence,

f(x)  = -8

Let's find x as follows:

-7x - 1 = - 8

-7x = -8 + 1

-7x = -7

divide both sides by -7

x = -7 / -7

x = 1

Hence,

f(1) = -8

learn more on function here: https://brainly.com/question/12431044

#SPJ1

The sum of the series is [[tex]e^a - 1]/(1+a).[/tex]

For the first question, we have:

(1) (2) () 10).(-1)*(0) = (1) * (2) * (0) * (-10) = 0

Therefore, the answer is 0.

For the second question, the Taylor series of the given expression is:

[tex]f(x) = 1 + x^2/2! + x^3/3! + ... + x^n/(n+1)![/tex]

We want to find the sum of this series evaluated at a particular value of x. Let's call this value a. Then:

[tex]f(a) = 1 + a^2/2! + a^3/3! + ... + a^n/(n+1)![/tex]

To find the sum of this series, we need to take the limit as n approaches infinity. Using the ratio test, we can show that the series converges for all values of x. Therefore:

sum = lim (n -> infinity) f(a)

sum = lim (n -> infinity) [[tex]1 + a^2/2! + a^3/3! + ... + a^n/(n+1[/tex])!]

We can rewrite the series as:

sum = lim (n -> infinity) [[tex]1 + a^2/2! + a^3/3! + ... + a^n/(n+1)![/tex]]

sum = lim (n -> infinity) [tex][(a^(n+1)/(n+1)!) + (a^n/n!) + (a^(n-1)/(n-1)!) + ... + (a^2/2!) + 1][/tex]
Using the formula for the sum of an infinite geometric series, we can simplify this expression to:

sum = lim (n -> infinity) [tex][a^(n+1)/(n+1)!] * [1/(1-a)][/tex]

We can now use the fact that [tex]e^x = 1 + x/1! + x^2/2! + x^3/3![/tex]+ ... to rewrite the expression as:

[tex]sum = [e^a - 1]/(1+a)[/tex]

Learn more about series here :-

https://brainly.com/question/4617980

#SPJ11

It takes approximately 19.26 hours for the size of the sample to double.

N(t) = N0 * [tex]e^(rt)[/tex]

2N0 = N0 * [tex]e^(rt)[/tex]

Dividing both sides by N0, we get:

2 = [tex]e^(rt)[/tex]

Taking the natural logarithm of both sides, we get:

ln(2) = rt

Solving for t, we get:

t = ln(2) / r

Substituting r = 0.036 (since the growth rate parameter is 3.6% per hour), we get:

t =  [tex]\frac{ln(2)}{0.036}[/tex]

t ≈ 19.26 hours

A logarithm is a mathematical function that represents the relationship between two quantities that are related by a constant ratio. In other words, it is the inverse operation of exponentiation. The logarithm of a number is the power to which another fixed number (called the base) must be raised to produce that number. For example, if the base is 10, the logarithm of 100 is 2 because 10 raised to the power of 2 equals 100.

Logarithms are useful in many areas of mathematics, science, and engineering because they allow for the simplification of complex mathematical expressions and the comparison of quantities that vary over a wide range of magnitudes. They are also used in the study of growth and decay processes, such as population growth and radioactive decay.

To learn more about Logarithm visit here:

brainly.com/question/30085872

#SPJ4

Answer: y = -1/2x - 5

Step-by-step explanation: slope intercept form equals y=mx+b you are trying to put it in this form therefore you subtract 2x from each side and you get 4y= -2x-20 you then divide 4 from each side and you get the answer

To find the rate at which the diameter of the circle is changing, we'll first need to determine the relationship between the area of the circular ripple and its radius.

The area of a circle is given by the formula A = πr². In this problem, the area is increasing at a constant rate of 5 m²/second (dA/dt = 5).

Now, we'll use implicit differentiation with respect to time (t) to find the rate of change of the radius:

dA/dt = d(πr²)/dt

5 = 2πr(dr/dt)

Since we're interested in the rate of change of the diameter (D) when the radius (r) is 4 m, and D = 2r, we'll differentiate D with respect to time:

dD/dt = 2(dr/dt)

Now, we can solve for (dr/dt) when r = 4:

5 = 2π(4)(dr/dt)

5/(8π) = dr/dt

Finally, we find dD/dt:

dD/dt = 2(5/(8π))

dD/dt = 5/(4π)

So, when the radius of the circular ripple in the pond is 4 m, the diameter is changing at a rate of 5/(4π) meters per second.

learn more about radius here:brainly.com/question/13449316

#SPJ11

The calculated value of x in the expression x^(1/12) = 49^(1/24) is 7

From the question, we have the following parameters that can be used in our computation:

x^(1/12) = 49^(1/24)

Express 49 as 7^2

So, we have

x^(1/12) = 7^(2 * 1/24)

Evaluate the products

This gives

x^(1/12) = 7^(1/12)

When both sides of the equations are compared, we have

x = 7

Hence, the value of x in the expression is 7

Read more about expression at

https://brainly.com/question/15775046

#SPJ1

The simplified form of the given function f(g(x)) as required to be determined in the task content is; f (g(x)) = 3x² -24x + 50.

It follows from the task content that the expression which represents f (g(x)) as required in the task content is to be determined.

Given; f(x) = 3x^2+2 and g(x) = x - 4.

Therefore; f (g(x)) = 3 (x - 4)² + 2

= 3 (x² - 8x + 16) + 2

= 3x² - 24x + 48 + 2

f (g(x)) = 3x² -24x + 50.

Ultimately, the expression which represents the function f (g(x)) as required is; f (g(x)) = 3x² -24x + 50.

Read more on nested functions;

https://brainly.com/question/24748644

#SPJ1

The mean of X based on random samples of size 25 taken with replacement is also 75, and the standard deviation of X based on random samples of size 25 taken with replacement is 8/5.

When random samples are taken with replacement, the mean of the sample means is equal to the population mean, and the standard deviation of the sample means is equal to the population standard deviation divided by the square root of the sample size.

So, the mean of the sample means is 75, and the standard deviation of the sample means is:

[tex]standard deviation of sample means = standard deviation of population / \sqrt{(sample size)}[/tex]

[tex]= 8 / \sqrt{(25)}[/tex]

= 8/5

Therefore, the mean of X based on random samples of size 25 taken with replacement is also 75, and the standard deviation of X based on random samples of size 25 taken with replacement is 8/5.

for such more question on standard deviation

https://brainly.com/question/475676

#SPJ11

Using multiplication principle of counting,

There are 160 ways to select your dinner choice if you need to pick one menu item from each category.

We have,

To determine the total number of ways to select a dinner choice, we need to use the multiplication principle of counting, which states that if there are m ways to do one thing and n ways to do another thing, then there are m × n ways to do both things.

Using this principle, we can find the total number of ways to select a dinner choice as follows:

Number of ways to select an appetizer = 4

Number of ways to select a main course = 5

Number of ways to select a dessert = 8

Using the multiplication principle of counting, the total number of ways to select a dinner choice is:

= 4 × 5 × 8

= 160

Therefore,

There are 160 ways to select your dinner choice if you need to pick one menu item from each category.

Learn more about the multiplication principle of counting here:

https://brainly.com/question/29078133

#SPJ1

Answer: A

Step-by-step explanation:

p.s i am emo

We can say that approximately 36.45% of the adults in the sample support the practice of changing clocks twice a year in observance of Daylight Saving Time.

The sample proportion, denoted by p-hat, is a measure of the proportion of individuals in the sample who support the practice of changing clocks twice a year in observance of Daylight Saving Time. To find p-hat, we divide the number of individuals in the sample who support the practice by the total number of individuals in the sample.

In this case, we have 113 individuals who support the practice out of a total sample size of 310. Thus, the sample proportion (p-hat) is:

p-hat = 113/310

p-hat = 0.3645 (rounded to four decimal places)

To learn more about sample proportion click here

brainly.com/question/24232216

#SPJ11

Complete Question

Given that 1 13 out of a random sample of 310 adults indicated that they support the practice of changing clocks twice a year in observance of Daylight Saving Time, what will the sample proportion (or p) be? Please compute this value below and round your answer to three decimal places.