Help please all of the numbers b4 the equal sign are wrong

This question is incomplete, the complete question is;

Determine the greatest pressure drop allowed over the 10-m-long pipe caused by viscous friction, so the flow remains laminar.

The 125-mm-diameter smooth pipe is transporting SAE 10W-30 oil with ρ=920 kg/m3 and µ=0.2 N.s/m2 .

Answer: the greatest pressure drop allowed is 14247 Pascals

Explanation:

LAMINAR FLOW INF PIPE

greatest pressure drop

(P1 - P2) = pressure drop

(P1 - P2) = 32uvl / D²

so (P1 - P2) ∝ V

greatest pressure drop is only at very high velocity

now Re (Reynold Number = svd / u

Re ∝ V

so velocity is high when Re is high

Re = 2000 ( Highest for LAMINAR)

Re = 2000 = svd / u

now in the question we were given that

s = 920 kg/m³, u = 0.2 NS/m², d = 125mm = 0.125m, l = 10m

so we substitute;

2000 = (920 × v × 0.125) / 0.2

v = 3.48 m/s

now pressure drop = (P1 - P2) = 32UVL / d²

we substitute

(P1 - P2)  = (32(0.2) (3.48)(10)) / (0.125)²

(P1 - P2) = 14247 Pascals

therefore the greatest pressure drop allowed is 14247 Pascals

Answer:

The answer is "828.75"

Explanation:

Please find the correct question:

For W21x93 BEAM,

[tex]Z_x = 221.00 in^3 \\\\\to \frac{b_t}{2t_f} =4.53\\\\\to \frac{h}{t_w}=32.3[/tex]

For A992 STREL,

[tex]F_y= 50\ ks[/tex]

Check for complete section:

[tex]\to \frac{b_t}{2t_f} =4.53 < \frac{65}{\sqrt{f_y = 9.19}}\\\\\to \frac{h}{t_w} =32.3 < \frac{640}{\sqrt{f_y = 90.5}}[/tex]

Design the strength of beam =[tex]\phi_b Z_x F_y\\\\[/tex]

                                                [tex]=0.9 \times 221 \times 50\\\\=9945 \ in \ \ kips\\\\=\frac{9945}{12}\\\\= 828.75 \ft \ kips \\[/tex]

Answer:

C₁₀ = 6.3 KN

Explanation:

The catalog rating of a bearing can be found by using the following formula:

C₁₀ = F [Ln/L₀n₀]^1/3

where,

C₁₀ = Catalog Rating = ?

F = Design Load = 2.75 KN

L = Design Life = 1800 rev/min

n = No. of Hours Desired = 10000 h

L₀ = Rating Life = 500 rev/min

n₀ = No. of Hours Rated = 3000 h

Therefore,

C₁₀ = [2.75 KN][(1800 rev/min)(10000 h)/(500 rev/min)(3000 h)]^1/3

C₁₀ = (2.75 KN)(2.289)

C₁₀ = 6.3 KN

Answer:

1) titration

2) titrand

3) equivalence point

4) titrant

5) Burette

6) Indicator

Explanation:

The process in which a known volume of a standard solution is added to another solution so that the standard solution can react with the solution of unknown concentration such that its concentration is determined  can be referred to as titration.

The solution which is added to another solution  is called the titrant.  The titrand is the solution of unknown concentration

A burette is a glassware used to slowly add a known volume of the titrant to the titrand.

The indicator used signals the point when the reaction is complete by a color change. At this point, a stoichiometric amount of titrant has been added to the titrand. This is also referred to as the equivalence point.

Answer:

science is hard but human cloning this is legendary but still its up to the government but me i would allow this because its something that science can upgrade to

Explanation:

Answer:

Draw up the contract for construction management.

Answer:

Work with construction management to solve specific problems as they arise.

Ensure compliance with safety standards.

Explanation:

Answer:

1) ∀x [ Tiger(x) → Fast(x) ]

2) эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) ∀x [ Prime(x) → Odd(x) ]

4) ∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) ∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) ∀xэy [ I(x) → greater (y, x) ]

Explanation:

Translating the statements into first Order Logic and their negations

1)   All tigers are fast. Domain: animals.

∀x [ Tiger(x) → Fast(x) ]

2)  Some tigers are fierce and dangerous. Domain: animals

эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) Every prime number is odd. Domain: positive integers

∀x [ Prime(x) → Odd(x) ]

4)  All prime numbers except two are odd. Domain: positive integers

∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) All fruits are either yellow or red. Domain: produce.

∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) For every integer number, there exist a bigger integer. Domain: integers.

∀xэy [ I(x) → greater (y, x) ]

Answer:

Answer:

1) ∀x [ Tiger(x) → Fast(x) ]

2) эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) ∀x [ Prime(x) → Odd(x) ]

4) ∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) ∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) ∀xэy [ I(x) → greater (y, x) ]

Explanation:

Translating the statements into first Order Logic and their negations

1)   All tigers are fast. Domain: animals.

∀x [ Tiger(x) → Fast(x) ]

2)  Some tigers are fierce and dangerous. Domain: animals

эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) Every prime number is odd. Domain: positive integers

∀x [ Prime(x) → Odd(x) ]

4)  All prime numbers except two are odd. Domain: positive integers

∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) All fruits are either yellow or red. Domain: produce.

∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) For every integer number, there exist a bigger integer. Domain: integers.

∀xэy [ I(x) → greater (y, x) ]

Explanation:

Answer:

1) titration

2) titrand

3) equivalence point

4) titrant

5) Burette

6) Indicator

Explanation:

The process of adding a known volume a standard solution to another solution to react with it in order to determine the concentration of the unknown solution is known as titration.

The solution to which another solution of known concentration is added is called the titrand while the solution of known concentration is called the titrant.

A burette is a glassware used to slowly add a known volume of the titrant to the titrand. An indicator shows the point when the reaction is complete by a color change. This is the point when the required amount of one solution has been added to the second solution. It is also called the equivalence point.

I. The process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them: Titration.

II. A solution of an unknown concentration that has another solution slowly added to it: Analyte.

III. When the required amount of one solution has been added to the second solution to complete the reaction: Endpoint.

IV. A solution of known concentration that is slowly added to a solution of unknown concentration: Titrant.

V. A glassware that allows a solution to be precisely and slowly added to another solution: Burette.

VI. A reagent added to the analyte solution that changes color when the reaction is complete: Indicator.

Titration is also referred to as titrimetry or volumetric analysis and it can be defined as a chemical process in which a solution of known concentration is slowly added to a solution of unknown concentration, in order to determine the concentration or quantity of the analyte (solution of an unknown concentration)

For example, titration can be used to determine the concentration of a basic solution by titrating it with an acid solution of known concentration that is required to neutralize the basic solution.

In Chemistry, the following terms and apparatus are used for the titration of solutions:

Read more: https://brainly.com/question/23307058

Answer:

The outer diameter of the ball is 6.2138 cm

Explanation:

The formula to apply is ;

Heat loss ,

[tex]Q/t=kA*\frac{( T_1-T_2)}{d}[/tex]

where ;

Q/t=total heat loss from the ball = 1600 w

k=coefficient of heat transmission through the ball= 2.75 W/m.˚C

A=area in m² of the ball with the coefficient of heat transmission

T₁=Hot temperature

T₂=Cold temperatures

d=thickness of the ball

Area of spherical ball using internal diameter, 3cm= 0.03 m will be

Radius = half the diameter = 0.03/2 = 0.015

Area = 4 *π*r²

Area = 4*π*0.015² = 0.002827 m²

Apply the formula for heat loss to get the thickness as:

1600 = {2.75 * 0.002827 *(250-30 ) }/d

1600 =1.711/d

1600d = 1.711

d=1.711/1600 = 0.001069 m

d= 0.1069

Using internal radius and the thickness to get outer radius as;

3 + 0.1069 = 3.1069 cm

Outer diameter will be twice the outer radius

2*3.1069 = 6.2138 cm

Answer:

1. They needed to develop multiple components in software programs.

2. The ability to overlap the development to be more evolutionary in nature.

3. The need to be more risk-averse or the unwillingness to take risks led to the use of a spiral model.

Explanation:

Software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications.

In SDLC, a waterfall model can be defined as a process which involves sequentially breaking the software development into linear phases. Thus, the development phase takes a downward flow like a waterfall and as such each phase must be completed before starting another without any overlap in the process.

An incremental model refers to the process in which the requirements or criteria of the software development is divided into many standalone modules until the program is completed.

Also, a spiral model can be defined as an evolutionary SDLC that is risk-driven in nature and typically comprises of both an iterative and a waterfall model. Spiral model of SDLC consist of these phases; planning, risk analysis, engineering and evaluation.

What motivated software engineers to move from the waterfall model to the incremental or spiral model is actually due to the following fact;

Answer:

The wind turbine has little impact on the environment compared to conventional power plants. Meanwhile the Wind turbine can affect the wildlife meaning birds are being harmed by the blades.

Explanation: Hope that helps:)

Answer:

Yes, this is completely independent.

Explanation:

Yes, this is completely independent. Even though there are no South American individuals that are majoring in biomedical engineering in this party it is still a completely independent factor. The origin of birth of an individual does not tie them to a specific degree or field of expertise, therefore a South American individual can study anything they want including mechanical engineering, electrical engineering, or biomedical engineering.

Answer:

cubes

Explanation:

Design for software engineering does not need special care for the placement of dimensions. Software engineering generally deals with arranging lines of coding.

In order to achieve a software's goal by using lower-level, machine-understandable algorithms and a set of parameters based on project requirements or environmental constraints, software design is the process of outlining solutions, planning, and specifying a method of implementation based on the needs of the user.

Software engineering is the application of engineering principles, which are often employed in the design, development, testing, deployment, and management of physical systems to the design.

Therefore, the main focus of software engineering is organizing coded lines that are kept in a device's or computer's memory rather than in actual physical space.

Learn more about design, here:

https://brainly.com/question/14099501

#SPJ2

Answer:

Hello your question is incomplete attached below is the missing part and answer

options :

Effect A

Effect B

Effect C

Effect D

Effect AB

Effect AC

Effect AD

Effect BC

Effect BD

Effect CD

Answer :

A  = significant

 B  = significant

C  = Non-significant

D  = Non-significant

AB  = Non-significant

AC  = significant

AD  = Non-significant

BC  = Non-significant

 BD  = Non-significant

 CD = Non-significant

Explanation:

The dependent variable here is Time

Effect of A  = significant

Effect of B  = significant

Effect of C  = Non-significant

Effect of D  = Non-significant

Effect of AB  = Non-significant

Effect of AC  = significant

Effect of AD  = Non-significant

Effect of BC  = Non-significant

Effect of BD  = Non-significant

Effect of CD = Non-significant

Answer:

It's indeed safer to suggest a 150 VA transformer. Following table however is the clarification given.

Explanation:

For 2 motors with 0.1 A, the Power will be:

P = [tex]2\times 120\times 0.1[/tex]

  = [tex]24 \ W[/tex]

For 4 motors with 0.18 A, the Power will be:

P = [tex]4\times 120\times 0.18[/tex]

  = [tex]86.4 \ W[/tex]

As we know, for 6 pilot lamps, the power is "5 W".

So,

The total power will be:

⇒ P = [tex]24+86.4+5[/tex]

       = [tex]115.4 \ W[/tex]

Now,

Consider the power factor to be "0.95"

VA of transformer is:

= [tex]PF\times Power[/tex]

= [tex]115.4\times 0.9[/tex]

= [tex]109.63 \ VA[/tex]

Answer:

a

Explanation:

just took the quiz

Answer:

is it multiple choice or....

Answer:

a) the rate of heat transfer from the pipe to the air is 23.866 watts

b) YES, the rate of heat transfer changes to 3518.61 watt

Explanation:

Given that:

steam is saturated at 17.90 bar.

the pipe is stainless steel and has an outside diameter of 6.75 cm

length = 34.7 m

Air flows over the pipe at 7.6 m/s

Bulk fluid temperature of 27°C

we know that

hD/k = 0.028 (Re)^0.8 (Pr)^0.33

Outside diameter of pipe = 6.75 cm

length of the pipe = 34.7 m

velocity of air = 7.6 m/s

Cp of air = 1.005 kJ/Kgk

viscosity of air = 1.81 × 10⁻⁵ kg/(m.sec)

thermal conductivity of air = 2.624 × 10⁻⁵ kw/m.k

so as

hD/k = 0.028 (Re)^0.8 (Pr)^0.33

hD/k = 0.028 (Dvp / u)^0.8 (Cpu / k)^0.33

(h × 0.0675 / 2.624 × 10⁻⁵) = (0.028 ([0.0675 × 7.6 × 1.225] / [1.81 ×10⁻⁵])^0.8) (((1.005 × 1.81 × 10⁻⁵) / (2.624 × 10⁻⁵))^0.33))

h = 0.0414 w/m².k

a)

Now to find the rate of heat transfer Q

Q = hAΔT

Q = 0.0414 × (2π × 0.03375 × 34.7) × (105.383 - 27)

Q = 23.866 watts

therefore the rate of heat transfer from the pipe to the air is 23.866 watts

b)

Now the flow direction changes to parallel flow, then

(h × 0.0675 / 2.624 × 10⁻⁵) = (0.028 ([34.7 × 7.6 × 1.225] / [1.81 ×10⁻⁵])^0.8) (((1.005 × 1.81 × 10⁻⁵) / (2.624 × 10⁻⁵))^0.33))

h = 6.1036 w/m².k

so from the steam table, saturated steam at 17.70 bar, temperature of steam will be 105.383°C

so to find the rate of heat transfer Q

Q = hAΔT

Q = 6.1036 × (2π × 0.03375 × 34.7) × (105.383 - 27)

Q = 3518.61 watt

Therefore the rate of heat transfer changes to 3518.61 watt

Answer: the cancer risk for an adult male drinking the water for 10 years is 2.88 × 10⁻⁶

Explanation:

firstly, we find the time t required to travel for the contaminant to the well;

Given that, contamination flowing rate = 0.5 ft/day

Distance of well from the site = 1 mile =  5280 ft

so t = 5280 / 0.5 = 10560 days

k is given as 1.94 x 10⁻⁴ 1/day

next we find the Pollutant concentration Ct in the well

Ct = C₀ × e^-( 1.94 x 10⁻⁴ × 10560)

Ct = 0.3 x e^-(kt)  

Ct= 0.0386 mg/L

next we determine the chronic daily intake, CDI

CDI =  (C x CR x EF x ED) / (BW x AT)

where C is average concentration of the contaminant(0.0368mg/L), CR is contact rate (2L/day), EF is exposure frequency (350days/Year), ED is exposure duration (10 years), BW is average body weight (70kg).

now we substitute  

CDI = (0.0368 x 2 x 350 x 10) / ((70x 365) x 70)

= 257.7 / 1788500

= 0.000144 mg/Kg.day

CDI = 1.44 x 10⁻⁴ mg/kg.day  

Finally we calculate the cancer risk, R

Slope factor SF is given as 0.02 Kg.day/mg

Risk, R = I x SF

= 1.44 x 10⁻⁴ mg/kg.day  x 0.02Kg.day/mg    

R = 2.88 × 10⁻⁶

therefore the cancer risk for an adult male drinking the water for 10 years is 2.88 × 10⁻⁶

Answer:

attached below is the detailed solution and answers

Explanation:

Attached below is the detailed solution

C(iii) : versus the parameter C

The parameter C is centered in a nonlinear equation, therefore the standard locus will not apply hence when you use a polynomial solver the roots gotten would be plotted against C

Answer: a(s) is of degree n and b(s) is of degree n-1.

a)Characteristic equation in form suitable for Evans's root-locus method is given by a(s) + b(s)K = 0, where a(s) and b(s) are polynomials of s with real coefficients. Now, given equation can be represented as: s + (1/τ) = 0 => s + (1/τ) = 0s + (1/τ)K = 0=> K = -τs/τ + 0Thus, L(s) = s, a(s) = 1, b(s) = 1 and K = -τ.

b)The characteristic equation is given by:s^2 + cs + c + 1 = 0For the root-locus method, we have to write the characteristic equation in the form a(s) + b(s)K = 0. Since the degree of a(s) is 2, we select K such that the degree of b(s) is also 2, and so b(s) will be monic.s^2 + cs + c + 1 = 0=> (s + c/2)^2 + 1/4 - c^2/4 + c = 0=> s^2 + (2c)s + (1 + c - c^2/4) = 0Now, taking a(s) = s^2 + (2c)s + (1 + c - c^2/4) and b(s) = 1 with K = -1/c^2, we have:a(s) + b(s)K = s^2 + (2c)s + (1 + c - c^2/4) - 1/c^2 = 0

c) The characteristic equation is given by:(s + c)3 + A(Ts + 1) = 0

i. versus parameter A:s = -c is a repeated root of multiplicity 3 when A = 0For s = -c, the characteristic equation becomes:-A(Tc + 1) = 0If A = 0, the characteristic equation will be (s + c)^3 = 0 and will have a repeated root at s = -c with a multiplicity of 3.

ii. versus parameter T:s = -c is a repeated root of multiplicity 3 when T = 0.For s = -c, the characteristic equation becomes:3c^2s + A = 0If A = 0, the characteristic equation will be (s + c)^3 = 0 and will have a repeated root at s = -c with a multiplicity of 3.

iii. versus the parameter c:We cannot draw the root locus of (s + c)3 + A(Ts + 1) = 0 with respect to the parameter c because there is no c term in the characteristic equation; it only contains c cubed.

d) The characteristic equation is given by:1 + (kp + k1/s + kDs/Ts + 1)G(s) = 0Assuming G(s) = Ac(s)/d(s), where c(s) and d(s) are monic polynomials with the degree of d(s) greater than that of c(s), the characteristic equation becomes:

d(s) + kp d(s) + k1 d(s)/s + kDs c(s)/T = 0.

Thus, a(s) = d(s) + k1 d(s)/s and b(s) = kDc(s)/T + kp d(s) with K = -1.

Therefore, a(s) is of degree n and b(s) is of degree n-1.

Learn more about root-locus : https://brainly.com/question/18406313

#SPJ11

Answer:

hello your question lacks the required diagram attached below is the diagram

answer : 58.47 N

Explanation:

The magnitude of the force acting on the Pin D

Fd = [tex]\sqrt{Dx^2 + Dy^2}[/tex]

    = [tex]\sqrt{16.80^2 + 56^2}[/tex]

    = 58.465 N

Dx = 16.80 N

Dy = 56 N

hello attached below is the detailed solution

Answer:

axial stress in bar B = 25Mpa.

Deformation of bar A = 0.4mm.

Explanation:

PS: Kindly check the attached picture for the diagram showing the two bars that is to say the bar A and the bar B.

So, we are given the following data or information or parameters which we are going to use in solving this particular question or problem. Here they are;

The cross-sectional areas of Bars A and B =  400 mm2, the  modulus of elasticity of  bar A and bar B = 200 GPa, applied force = 10kN.

STEP ONE: The first step is to determine or calculate the axial stress in bar B. Therefore,

Axial stress in bar B = 10 × 10³ ÷ 400 × 10⁻⁶ = 25 Mpa.

STEP TWO: The second step here is to determine or calculate the deformation of bar A. Therefore,

The deformation of bar A = 20 × 10³ ×1.5 ÷ 400 × 10⁻⁶ × 200 × 10³ = 0.375 mm.

Answer:

changes of Mass affect the planet because... I'm sorry If this didn't help.

Answer:

Explanation:

The situation being described completely fails in regard to the importance of metrology. This is because the main importance of metrology is making sure that all of the measurements in a process are as accurate as possible. This accuracy allows an entire process to function efficiently and without errors. In a food production plant, each individual department of the plant relies on the previous function to have completed their job with the correct and accurate instructions so that they can fulfill their functions correctly and end up with a perfect product. If the oven (like in this scenario) is a couple of degrees off it can cause the product to come out burned or undercooked, which will then get transferred to the next part of production which will also fail due to the failed input (burned or undercooked product). This will ultimately lead to an unusable product at the end of the process and money wasted. Which in a large production plant means thousands of products in a single batch are thrown away.

In terms of the necessity of metrology, the situation stated absolutely fails. This is because metrology's primary goal is to ensure that all measurements in a process are as precise as feasible. This precision allows a whole process to run smoothly and error-free. If the oven temperature is wrong by a few degrees, the product will come out charred or undercooked, and the product will be sent to the next step of the process, which will also fail owing to the failed input. This will result in a useless product and a waste of money at the end of the procedure. In a big manufacturing facility, this means thousands of goods are discarded in a single batch.

Answer:

fggffgethjbdxvgrsbjb you are my world I see the attached resume

Answer:

Explanation:

From the given information;

The first objective is to derive an expression for the execution time in cycles

For an execution time T for the non-pipelined processor;

[tex]T = \dfrac{N \times S}{R}[/tex]

where

N = instruction count

S = average number of clock cycles to fetch & execute an instruction

R = clock rate

From the average number of clock

[tex]S = 1 + \delta _{branch\_penality }[/tex]

where;

[tex]\delta _{branch\_penality }= {Dynamic \ count \times Delay \ Slots}[/tex]

Similarly, we are given that the dynamic count is 20%

∴

The execution time required for all the delayed slots that is filled with NOP instructions can be estimated as:

[tex]\delta _{branch\_penality }=0.20 \times 1.00[/tex]

[tex]\delta _{branch\_penality }=0.20[/tex]

Therefore;

S = 1 + 0.20

S = 1.2

Recall that:

For an execution time T for the non-pipelined processor;

[tex]T = \dfrac{N \times S}{R}[/tex]

[tex]T = \dfrac{N \times 1.2}{R}[/tex]

[tex]T = \dfrac{ 1.2 \ N}{R}[/tex]

To derive another expression that reflects the execution time of 70% delay; we have:

[tex]\delta_{branch\_penality} = 0.20 \times ( 1-0.7)[/tex]

[tex]\delta_{branch\_penality} = 0.20 \times ( 0.3)[/tex]

[tex]\delta_{branch\_penality} = 0.06[/tex]

S = 1 + 0.06

S = 1.06

For an execution time T for the non-pipelined processor;

[tex]T = \dfrac{N \times S}{R}[/tex]

[tex]T = \dfrac{N \times 1.06}{R}[/tex]

[tex]T = \dfrac{ 1.06 \ N}{R}[/tex]

Finally, the compiler's contribution to the increase in speed up percentage for the above two cases is:

[tex]=\begin {pmatrix}\dfrac{T_{all \ delay \ slots }}{T_{70\% \ delay \ slots } } -1 \end {pmatrix} \times 100[/tex]

[tex]= \begin {pmatrix}\dfrac{1.2 }{1.06 } -1 \end {pmatrix} \times 100[/tex]

= (1.1320 - 1) × 100

= 0.1320 × 100

= 13.20%

Therefore, the compiler's contribution to increasing performance as expressed as speed up percentage is 13.20%