Answers
Single replacement/displacement
Further explanationGiven
Type involves free element
Required
Type of reaction
Solution
Single replacement/displacement occurs when a more active element replaces another less active element in the compound to form a new compound
The activity of this element can be seen from the voltaic series
Li-K-Ba-Ca-Na-Mg-Al-Mn- (H2O) -Zn-Cr-Fe-Cd-Co-Ni-Sn-Pb- (H) -Cu-Hg-Ag-Pt-Au
The more to the left, the element is more reactive (easily release electrons) and the stronger reducing agent
The general formula for single replacement :
A + BC ⇒ AC + B
From this general formula shows that there are 2 free elements on both sides (reactants and products)
Related Questions
If 525 N of force is applied to a 4.5
kg mass, how fast will it accelerate?
Answers
Answer:
121.11m/s²
Explanation:
Given parameters:
Force = 525N
Mass = 4.5kg
Unknown:
Acceleration = ?
Solution:
From Newton's second law of motion, we can find the solution to this problem. Using the expression below:
F = m x a
F is the force
m is the mass
a is the acceleration
So'
525 = 4.5 x acceleration
Acceleration = 121.11m/s²
What is the main difference between physical and chemical changes
versus nuclear changes? *
A.Nuclear changes do not involve the subparticles- protons, neutrons, or electrons.
B.Nuclear changes release less energy than chemical and physical changes.
C.Nuclear changes result in the formation of a different element while physical and
chemical changes involve the same elements from start to finish.
D.There are no differences.
Answers
Answer:
B
Explanation:
Because nuear changes release less negeyr than a chmeicsl and phsycial change
please help this is for a really big grade thanks whoever gets it correct will be given brainliest and 50pts
Answers
Answer: Humans have increased the global temperature due to fossil fuel burning and are negatively contributing to the increase of CO2 emissions and greenhouse gases.
Explanation:
#1 Over the past century humans have negatively impacted the environment by increasing the global temperature due to fossil fuel emissions and a steady increase in the human population which has led to more resources being extracted and used.
#2 Human activities have brought a sudden increase in the global temperature recently due to the increase in greenhouse gas emissions from factories, automobiles, and homes. While we are beginning to use renewable resources, a large portion of our energy consumption still comes from the production and burning of fossil fuels.
#3 Some ways we can start to put a stop to global warming are by using renewable energy resources and decreasing the use of fossil fuel emissions. We can also decrease our carbon footprint by using electric powered vehicles and devices instead of petroleum burning automobiles and home appliances, and by riding bikes and walking over short distances.
Note: Please reword this a bit so you don't get in trouble for plagiarism.
A spring toy is moving down steps, What happens to the energy of the toy?
Answers
Hope this helps
Help me please if your good at science :)*me over here struggling about to cry*
During which time period does the car have the greatest acceleration?
A. Between 2 and 4 seconds
B. Between 1 and 6 seconds
C. Between 0 and 1 seconds
D. Between 1 and 2 seconds
Answers
Answer:
C. Between 0 and 1 seconds
Explanation:
Since 0 - 1 seconds the car accelerates to 20mph. The rest each second the car accelerates 5mph.
Answer:
c
Explanation:
a p e x!
How many liters are in 27.6 g of copper phosphate with a molarity of 6.03 ?
Answers
Answer:
Volume in L = 0.028 L
Explanation:
Given data:
Mass of copper phosphate = 27.6 g
Molarity solution = 6.03 M
Volume of solution = ?
Solution:
First of all we will calculate the number of moles of copper phosphate.
Number of moles = mass/molar mass
Number of moles = 27.6 g/ 159.61 g/mol
Number of moles = 0.17 mol
Volume of solution:
Molarity = number of moles / volume in L
By putting values,
6.03 M = 0.17 mol / volume in L
Volume in L = 0.17 mol / 6.03 M
Volume in L = 0.028 L
what is k more reactive than li?
Answers
Choose the correct missing coefficient to balance the following equation:
___NO + O2 ---> 2NO2 *
1
2
3
4
Answers
Answer:
the answer is 2 hope this helps
Which of the following is an example of erosion in action?
a) Rock on the edge of river
b) Soil material being moved downstream carried by water
c) A desert valley
d) A tree growing next to a lake
Answers
Answer:
b) Soil material being moved downstream carried by water
Explanation:
Erosion can be defined as a geological process which typically involves the wearing out of earthen (soil) materials and the transportation of these materials by natural forces like water, wind, etc. Soil erosion is greatest when the soil is steep.
The steepness of a body such as river or stream refers to the downward slope or gradient of the body of water.
Generally, the steepness of a body affects the rate at which other materials would flow or move around. Thus, the steeper a river or stream, the greater would be its rate of erosion.
An example of erosion in action is soil material being moved downstream carried by water.
why can't copper sulphate be prepared by adding copper metal to dilute sulphuric acid
Answers
Answer:
Copper metal will not react with sulfuric acid . ( Copper metal is too unreactive / it is " below hydrogen in the reactivity series " ). So use copper carbonate, it reacts easily to give copper sulfate ( and carbon dioxide and water ) .
Explanation:
i hope it's help you
Copper sulphate cannot be prepared by adding copper metal to dilute sulphuric acid because copper is below hydrogen in the reactivity series of metals.
What is copper sulphate?Copper sulphate is an inorganic compound formed by the reaction of copper and sulphur.
What is sulphuric acid?Sulphuric acid is a strong acid that are made by the oxidizing solutions of sulphur dioxide.
Copper is below hydrogen in the reactivity series of metals, so it is unable to displace hydrogen from dil. sulphuric acid.
However, it reacts with conc. sulphuric acid to form copper sulphate.
Cu + conc. 2H2SO4 → CuSO4 + 2H2O + SO2
To learn more about copper sulphate and sulphuric acid here
https://brainly.com/question/21011057
#SPJ2
Convert this temperature from °F to °C. Explain how pls?
-2.2 C
10.6°C
2.2°C
33.3°C
Answers
Answer:
Start with the temperature in Fahrenheit (e.g., 100 degrees).
Subtract 30 from this figure (e.g., 100 - 30 = 70).
Divide your answer by 2 (e.g., 70 / 2 = 35).
What type of stress results when two plates converge? Compression Shear Hot spot
Answers
Answer:
Compression
Explanation:
Hi! When two convergent plates collide, they should create compressive pressure, or compression.
Deuterium is an isotope of hydrogen (H) that has:
A. 1 proton and 1 neutron
B. 1 proton and 2 neutrons
C. 1 proton and O neutrons
D. 2 protons and 1 neutron
Answers
Answer: B. 1 proton and 1 neutron(s)
Explanation: Founders Educere answer.
I love you, fellow summer school students good luck!
Please rate and vote and mark brainliest, I want a rank up.
The molar masses of four unknown gases are shown in the table.
Molar Mass of Unknown Gases
Gas Molar Mass
A 44 g/mol
B 20 g/mol
C 30 g/mol
D 32 g/mol
Which gas is likely to have the lowest rate of diffusion?
a. Gas A
b. Gas B
c. Gas C
d. Gas D
Answers
a. Gas A has the lowest rate of diffusion
Further explanationGiven
The molar masses
Required
the lowest rate of diffusion
Solution
Graham's law: the rate of effusion of a gas is inversely proportional to the square root of its molar masses or
the effusion rates of two gases = the square root of the inverse of their molar masses:
[tex]\rm \dfrac{r_1}{r_2}=\sqrt{\dfrac{M_2}{M_1} }[/tex]
So :
[tex]\tt r\approx \dfrac{1}{\sqrt{M} }[/tex]
The greater the molar mass, the smaller the rate
So gas A has the lowest rate
Which would aid a student in preparedness for a lab?
O using a fire extinguisher if there is a fire
O reading the lab manual before class
O telling the teacher about a chemical spill
O cleaning up after the lab
Answers
Answer: cleaning up after the lab, D.
Explanation:
silver bromide (AgBr) has a solubility of 7.07 × 10^-7 mol/L
a. write the dissolution reaction of Abraham, including all states.
b. write the expression for ksp for AgBr
c. calculate the solubility product constant of AgBr
Answers
a. AgBr(s)⇒ Ag⁺(aq) + Br⁻(aq)
b. Ksp AgBr = s²
c. 5 x 10⁻¹³ mol/L
Further explanationGiven
solubility AgBr = 7.07 x 10⁻⁷ mol/L
Required
The dissolution reaction
Ksp
The solubility product constant
Solution
a. dissolution reaction of AgBr
AgBr(s)⇒ Ag⁺(aq) + Br⁻(aq)
b. Ksp
Ksp AgBr = [Ag⁺] [Br⁻]
Ksp AgBr = (s) (s)
Ksp AgBr = s²
c. Ksp AgBr = (7.07 x 10⁻⁷)² = 5 x 10⁻¹³ mol/L
Balance this equation-
Fe + O2 Fe3 O4
Answers
The table shows index fossils.
A 4 row table. Row 1, CENOZOIC ERA. It is split into Quaternary Period, Pecten gibbus, and Tertiary Period, Calyptraphorus velatus. Row 2, MESOZOIC ERA. It is divided into Cretaceous Period, Scaphites hippocrepis, Jurassic Period, Perisphinctes tiziani, and Triassic Period, Trophites subbullatus. Row 3, PALEOZOIC ERA. It is divided into Permian Period, Leptodus americanus, Pennsylvanian Period, Dictyoclostus americanus, Mississippian Period, Cactocrinus multibrachiatus, Devonian Period, Mucrospirifer mucronatus, Silurian Period, Cystiphyllum niagarense, Ordovician Period, Bathyurus extans, and Cambrian Period, Paradoxides pinus. Row 4, PRECAMBRIAN, has no additional information.
Which conclusion about Paradoxides pinus is supported by the information in the table?
Life forms existed during the Cambrian period.
Similar fossil species formed after the Devonian period.
This fossil species first appeared during the Cenozoic era.
Different life forms were surviving during Precambrian time.
Answers
Answer:
A. life forms existed during the Cambrian period
Explanation:
Answer:
A
Explanation:
Have a nice day!
3 difference between Homogeneous mixture and Heterogeneous Mixture
Answers
Answer:
Difference between Homogeneous mixture and Heterogeneous Mixture are as follows:
A mixture or sample that is consist of uniform composition and properties is called a homogeneous mixture while a mixture or sample that is consist of different composition and properties is called a heterogeneous mixture.Homogenous mixture has only single phase while heterogeneous mixture has two or more phases.Homogenous mixture can not be separated by physical methods while heterogeneous mixture can be separated out physically.Example of homogenous mixture is Water and sugar and heterogeneous mixture is oil and water.A chemist is identifying the elements present in a sample of a sea water. What characteristics of an element's
atoms always determines the element's identity?
A.
B
C.
D
The number of protons
The number of neutrons
The location of valence electrons
The number of valence electrons
Answers
Answer:
The number of valence electrons
b. How many grams of CO2 are produced from 36
grams of CH4?
Answers
Answer:
Ch4 G +2o2 g co2 G +2h2o g How many moles of methane are required to produce 22 g co2 G after combustion
Explanation:
it's 22 grams..
hope the answer was helpful ....
The radii of the atoms become smaller from sodium to chlorine across period 3. This decrease is primarily a result of
Answers
Answer:
Nuclear Charge
Explanation:
As we move from sodium to chlorine across, there's increase in atomic number (protons). This also means there is increase in the valence electrons (The valence electrons is denoted by the group).
As the number of protons increases, the nuclear energy also increases. Due to this, the electrons are attracted more strongly and pulled closely to the nucleus.
free 100 for the boys
Answers
What would be the anode
a magnesium and zinc galvanic cell?
Answers
Answer:
Magnesium Mg act as anode
Explanation:
Because its reduction potential is much less than zinc
Answer: C. Mg(s)
Explanation:
Which electron configuration is magnetic, paired or unpaired electrons
Answers
Answer:
paired electrons is magnetic configuration
Where does the energy required to break the interactions between butane molecules come from when butane boils?
Answers
Answer:
The properties of liquids are intermediate between those of gases and solids, but are more similar to solids. In contrast to intramolecular forces, such as the covalent bonds that hold atoms together in molecules and polyatomic ions, intermolecular forces hold molecules together in a liquid or solid. Intermolecular forces are generally much weaker than covalent bonds. For example, it requires 927 kJ to overcome the intramolecular forces and break both O–H bonds in 1 mol of water, but it takes only about 41 kJ to overcome the intermolecular attractions and convert 1 mol of liquid water to water vapor at 100°C. (Despite this seemingly low value, the intermolecular forces in liquid water are among the strongest such forces known!) Given the large difference in the strengths of intra- and intermolecular forces, changes between the solid, liquid, and gaseous states almost invariably occur for molecular substances without breaking covalent bonds.
Explanation:
im not sure this is what your looking for but i found this
Scientific notation
1.9 x 10^3 + 2.3 x 10^4
Answers
Which term is NOT submicroscopic?
A. atom
B. ion
C. pen
D. molecule
Answers
Describe a method to investigate how the temperature changes when
different masses of ammonium nitrate are dissolved in water.
You do not need to write about safety precautions.
(6marks)
Answers
Answer:
Decrease temperature with increase in ammonium nitrate concentration.
Explanation:
The temperature changes when different masses of ammonium nitrate are dissolved in water because the ammonium nitrate takes energy from the surrounding water environment for the breaking of ionic bonds as a result the temperature of water decreases. When more concentration of ammonium nitrate is added to water, more decrease occur in temperature of water and the water becomes cold.
Hotness or a cold state of a substance or a solution is measured physically by temperature. It is measured by a device called a thermometer and can be in the form of Kelvin, degree Celsius or degree Fahrenheit.
Decreasing the temperature with an upsurge in the ammonium nitrate concentration can be used in determining the change in the temperature.
The change can be explained as:The alteration in temperature can be seen after adding more ammonium nitrate with various concentrations to the water.Ammonium nitrate accepts energy from the water present in its surrounding solution for splitting the ionic bonds present.This energy acceptance from water reduces the temperature of the water and with the increase in concentration lowers the water temperature more.Therefore, increased concentration reduce temperature.
Learn more about temperature and here:
https://brainly.com/question/17203760
PLS HELP MEEEEEEEEEEEE
Answers
Answer:
108- Hassium
11- sodium
56- Barium
92- uranium
25- manganese
103- lawrencium
10- neon
22- titanium
8- oxygen
14- silicon
32- germanium
39- yttrium