HELP ME PLS!!!!
Find the location of beryllium (Be) on the periodic table. What type of ion will
beryllium form?
A. An ion with a -2 charge
B. An ion with a +6 charge
C. An ion with a +2 charge
D. An ion with a -6 charge

Answer:

Loudness of the second sound is more than the first one.

Explanation:

There are two sounds, the second sound is identical to first but the loudness of second is more than the first one.

As the frequency is same so the itch is same for both the sounds.

As the loudness depends on the amplitude of the sound so the loudness of the second sound is more than the first sound.

Answer:

because density of iron is more than that of water but less then that of Mercury

hope it's helpful

Answer:

-30 N/C

Explanation:

Since the potential changes from 0.90 V to 1.2 V when I move the probe 1 cm closer to the non-grounded electrode, the electric field is the gradient between the two points is given by E = -ΔV/Δx where ΔV = change in electric potential and Δx = distance of potential change = 1 cm = 0.01 m

Now ΔV = final potential - initial potential = 1.2 V - 0.90 V = 0.30 V

Since E = -ΔV/Δx

substituting the values of the variables into the equation, we have

E = -ΔV/Δx

E = -0.30 V/0.01 m

E = -30 V/m

Since 1 V/m = 1 N/C.

E = -30 N/C

So, the average electric field is -30 N/C

Answer:

An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume. ... In electric circuits the charge carriers are often electrons moving through a wire.

Answer:

The flow of moving electrons

Answer:

B

Explanation:

B

Answer:

wind

Explanation:

just a possible answer.

Answer:

The answer should be clenching fists

Answer:

The acceleration is a negative as the ball is now moving in the opposite direction.

The velocity would decrease as the ball moves upward

Acceleration remains constant and velocity is negative and decreasing as per the given scenario. The correct option is B.

In mechanics, acceleration is defined as the rate of change of an object's velocity with respect to time.

Vector quantities are accelerations. The orientation of an object's acceleration is determined by the orientation of its net force.

Velocity is the directional speed of a moving object as an indication of its rate of change in position as observed from a specific frame of reference and measured by a specific time standard.

The rate of displacement of an entity known as its velocity. It is measured in meters per second. The rate of change in velocity of an object is defined as acceleration.

According to the scenario, acceleration remains constant while velocity decreases and is negative.

Thus, the correct option is B.

For more details regarding acceleration, visit:

https://brainly.com/question/12550364

#SPJ2

Your question seems incomplete, the missing options are:

Answer:

◆ See the attachment photo.

◆ Don't forget to thanks

◆ Mark as brainlist.

Answer:

a. 1 Newton = 100000 Dyne

b. a represents acceleration.

Explanation:

Newton is the standard unit (S.I) of measurement of force. Converting 1 Newton to dyne we have;

1 Newton = 10⁵ Dyne

1 Newton = 100000 Dyne

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

Force = mass * acceleration

[tex] F = ma[/tex]

Hence, we can deduce that a represents the acceleration of an object and it's measured in meters per seconds square.

Answer:

b is correct.

Explanation:

because of the question you have given

Answer:

Explanation:

Here's what we know and in which dimension:

y dimension:

[tex]v_0=30[/tex] m/s

v = 0 (I'll get to that injust a second)

a = -9.8 m/s/s

The final velocity of 0 is important because that's the velocity of the ball right at the very top of its travels. If we knew how long it takes to get to that max height, we can also use that to find out how long it will take to hit the ground. Therefore, we will find the time it takes to reach its max height and pick up with the investigation of what this means after.

x dimension:

Δx = 70 m

v = ??

Velocity is our unknown.

Solving for the time in the y dimension:

[tex]v=v_0+at[/tex] and filling in:

0 = 30 + (-9.8)t and

-30 = -9.8t so

t = 3.1 seconds

We know it takes 3.1 seconds to get to its max height. In order to determine how long it will take to hit the ground, just double the time. Therefore, it will take 6.2 seconds for the ball to come back to the ground, which is where the persom trying to catch the ball comes in. We will use that time in our x dimension now.

In the x dimension, the equation we need is just a glorified d = rt equation since the acceleration in this dimension is 0.

Δx = vt and

70 = v(6.2) so

v = 11.3 m/s

Answer:

4.60 × 10⁻⁸

Explanation:

From the given information;

Assuming that q charges are transferred, then:

[tex]F = \dfrac{kq^2}{d^2}[/tex]

where;

k = 9 ×10⁹

[tex]900000 = \dfrac{9*10^9 \times q^2}{1.2^2}[/tex]

[tex]q = \sqrt{\dfrac{900000\times 1.2^2 }{9*10^9}}[/tex]

q = 0.012 C

No of the electrons transferred is:

[tex]= \dfrac{0.012}{1.6\times 10^{-19}} C[/tex]

[tex]= 7.5 \times 10^{16} \ C[/tex]

Initial number of electrons =  N × 47 × no  of moles

here;

[tex]\text{ no of moles }= \dfrac{6.2}{107.87}[/tex]

no of moles = 0.0575 mol

∴

Initial number of electrons =  [tex]6.023\times 10^{23} \times 47 \times 0.0575 mol[/tex]

= 1.63 × 10²⁴

The fraction of electrons transferred  [tex]=\dfrac{7.5\times 10^{16} }{1.6 3\times 10^{24}}[/tex]

= 4.60 × 10⁻⁸

Answer:

Boyle's law.

Explanation:

Robert Boyle was an Irish chemist and is famously referred to as the first modern chemist. He was born on the 25th of January, 1627 in Lismore, Ireland and died on the 31st, December 1691, London, United Kingdom.

Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.

Mathematically, Boyles law is given by;

[tex] PV = K[/tex]

[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]

Where;

P1 is the original pressure.

P2 is the final pressure.

V1 is the original volume.

V2 is the final volume.

Hence, when you release some of the paint from a spray paint can by applying an amount of pressure and the can remains at the same temperature, the gas law which this represent is Boyle's law.

Answer:

- the power to the air is 850 MW

- mass flow rate of the air is 84577.11 kg/s

Explanation:

Given the data in the question;

Net power generated; [tex]W_{net[/tex] = 150 MW

Heat input; [tex]Q_k[/tex] = 1000 MW

Power to air = ?

For closed cycles

Power to air Q₀ = Heat input; [tex]Q_k[/tex] - Net power generated; [tex]W_{net[/tex]

we substitute

Power to air Q₀  = 1000 - 150

Q₀ = 850 MW

Therefore,  the power to the air is 850 MW

given that ΔT = 10 °C

mass flow rate of air required will be;

⇒ Q₀ / CpΔT

we know that specific heat of air at p=c ; Cp = 1.005 kJ/kg.K

we substitute

⇒ ( 850 × 10³ ) / [ 1.005 × 10 ]

⇒ ( 850 × 10³ ) / 10.05

⇒ 84577.11 kg/s

Therefore, mass flow rate of the air is 84577.11 kg/s

Answer:

arge number of electrons free to move between the charged ions in the lattice.

Explanation:

The metallic bond occurs when an atom with few electrons is united in its last level, therefore the best way to decrease the total energy of the system is to lose all its electrons to remain with the configuration of a noble gas. The electrons that it loses cannot be acquired by other atoms since they all have few electrons, thus leaving a large number of electrons free to move between the charged ions in the lattice.

Some important characteristics emerge from this description of the metallic bond:

* It has many free electrons therefore its electrical conductivity is high

* As the charged ions are fixed, the material can be malleable, bent without breaking since the free electrons create the bond that keeps the system stable.

* As the electrons are free when heating a part of the material, these electrons acquire energy and rapidly propagate it to the other side, giving a high thermal conductivity

* As the temperature increases, the electrons acquire more kinetic energy, which is why there are more collisions between them and consequently the resistivity of the material increases.

Answer:

[tex] = \frac{30 \times {10}^{ - 3} }{1} \\ = 0.03 \: km \: per \: second[/tex]

Answer:

108 km/hr or 0.03 km/s

Explanation:

conversion factor for m/s to km/hr is 5/18

conversion factor for m/s to km/s is 1/1000

Explanation:

The initial kinetic energy [tex]KE_0[/tex] for both blocks is zero. Let [tex]m_1= m[/tex] and [tex]m_2 =3m[/tex]. So using the conservation law of linear momentum, we can write

[tex]0 = m_1v_1 - m_2v_2[/tex]

or

[tex]v_2 = \dfrac{m_1}{m_2}v_1 = \dfrac{m}{3m}v_1 = \dfrac{1}{3}v_1[/tex]

The final kinetic energies for the two masses are

[tex]KE_1 = \frac{1}{2}m_1v_1^2 = \frac{1}{2}mv_1^2[/tex]

[tex]KE_2 = \frac{1}{2}m_2v_2^2 = \frac{1}{2}(3m)(\frac{1}{3}v_1)^2 = \frac{1}{2}m(\frac{1}{3}v_1^2)[/tex]

Therefore, the ratio of their kinetic energies is

[tex]\dfrac{\Delta KE_2}{\Delta KE_1} = \dfrac{\frac{1}{2}(\frac{1}{3}v_1^2)}{\frac{1}{2}v_1^2} = \dfrac{1}{3}[/tex]

Answer:

B

Explanation:

The liquid evaporates in the solid is left in the dish..

Answer:

Thus, the velocity at the time of strike is same as the velocity at the time of projection.

Explanation:

Let a projectile is projected vertically upwards with a speed of u and reaches to the maximum height H.

At maximum height , the speed is zero and then the projective comes back on the ground.

Use the third equation of motion

[tex]v^2 = u^2 + 2 g h \\\\0 = u^2 - 2 g H\\\\\u =\sqrt{2gH}[/tex]

Now let the velocity at the time of strike is v'.

Use third equation of motion, here initial velocity is zero.  

[tex]v'^2 = 0 + 2 g H \\\\v = \sqrt{2gH}[/tex]

Thus, the velocity at the time of strike is same as the velocity at the time of projection.

Answer:

below

Explanation:

Part A) This engine works  per cycle is 254.9 J.

Part B) The thermal efficiency is  23.42%

The thermal efficiency of any heat engine is represented in percentage of heat energy converted into work.

For isothermal expansion, work done is

W₁ =nRT₁ x ln(V₂/V₁)

W₁ = 0.1 x 8.314 x 800 x ln(5000/3000)

W₁ = 339.8 J =Q₁

For isochoric cooling ,

W₂ =0

Q₂ =nCvdT = 0.1 x 3R/2 x (T₂-T₁)

Q₂ = -748.3 J

For isothermal compression,

W₃ =nRT₂ ln (V₄/V₃)

W₃  = 0.1 x 8.314 x 200 x ln(3000/5000)

W₃ = -84.9J

For isochoric heating

W₄ =0

Q₄ =nCvdT = 0.1 x 3R/2 x (800-200)

Q₄  = -748.3 J

Total work done in all the process W = W₁ +W₂ +W₃ +W₄

W =254.9 J

Thus, the work done is 254.9 J

Thermal efficiency = Work done/Heat taken

η = W/ Q₁ +Q₄

η = [254.9 / 339.8 +748.3 ] x 100 %

η = 0.2342 x 100 %

η = 23.42%

Thus, the thermal efficiency is 23.42%

Learn more about thermal efficiency.

https://brainly.com/question/13039990

#SPJ2

'

two electrons are created from a quanta of kight

Answer:

Energy Bill fluctuations are inevitable and depend on a variety of different factors. Two of the most important are the current weather your home is experiencing and the current price per Kilowatt Hour (which fluctuates more than you might think).

Explanation:

ehb-pynw-ayo

joi n fast

Answer: Hmmm im not sure but i'd go with 3.80x10^5

Explanation: Like i mentioned im not very good at physics...sorry if its wrong

Answer:

Mm, thats the answer trust me men