Help me please I need to write the number of atoms

Answer:

Improving the habitats of herring thereby increasing their population.

Explanation:

First, two consumers (Steller sea lion and  Pollock) are both competing for common prey (herring). Since the question only asked what could be done to increase the decreasing Steller sea lion population of Alaska, the focus would be made only on the Steller sea lion.

The Steller sea lion population would increase if:

1. The herring population should be increased by improving the food available for them to feed on, and improving their reproduction capacities to enable them to reproduce efficiently.

2. Since there are 2 predators. If the population of the prey is fixed, then Pollock should be more hunted by farmers or other biological means to eliminate competition.

This answer is not a whole number due to the fact that it is a decimal form.

A whole number would be 635, it would not be 63.5. Therefore this number is not whole.

Answer:

3.06 g/L

Explanation:

Taking into account the definition of density and ideal gas law, the density of aluminum chloride vapor (AlCl₃) at 498 K and 0.939 atm is 3.06 g/L.

Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.

In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance. Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

[tex]density=\frac{mass}{volume}[/tex]

Ideal gases are a simplification of real gases that is done to study them more easily. It is considered to be formed by point particles, do not interact with each other and move randomly. It is also considered that the molecules of an ideal gas, in themselves, do not occupy any volume.

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of gases:

P×V = n×R×T

From the Ideal gas law, you can get that:

[tex]\frac{n}{V} =\frac{P}{RxT}[/tex]

On the other side, the molar mass of substance is a property defined as the amount of mass that a substance contains in one mole. It can be expressed as:

[tex]molar mass= \frac{mass}{number of moles}[/tex]

Then, the number of moles n can be calculated as:

[tex]n=\frac{mass}{molar mass}[/tex]

So:

[tex]\frac{\frac{mass}{molar mass} }{V} =\frac{P}{RxT}[/tex]

Solving you get the expression:

[tex]\frac{mass }{V} =\frac{Pxmolar mass}{RxT}[/tex]

Considering the definition of density, you finally get:

[tex]density=\frac{Pxmolar mass}{RxT}[/tex]

In this case, you know:

Replacing in the previous expression for the calculation of the density:

[tex]density=\frac{0.939 atmx133.35\frac{g}{mol} }{0.082\frac{atm L}{molK} x498 K}[/tex]

and solving you get:

density= 3.06 g/L

Finally, the density of aluminum chloride vapor (AlCl₃) at 498 K and 0.939 atm is 3.06 g/L.

Learn more about

density:

brainly.com/question/952755

brainly.com/question/1462554

ideal gas law:

https://brainly.com/question/4147359

Answer:

To determine if the forces acting upon an object are balanced or unbalanced, an analysis must first be conducted to determine what forces are acting upon the object and in what direction. If two individual forces are of equal magnitude and opposite direction, then the forces are said to be balanced

Explanation:

Answer:

Transverse!

Explanation:

Transverse is a more direct moving wave

The wave which is generated by moving a spring toy up and down is transverse wave. An electromagnetic wave is a transverse wave. The correct option is C.

A transverse wave is a progressive wave. The direction of propagation of a transverse wave is always perpendicular to its direction of vibration. They are non-mechanical waves which do not need a medium for propagation and they consists of crests and troughs.

When a toy spring is moved up and down, the generating waves that propagate in the horizontal direction while disturbing the toy spring in the vertical direction. In physics transverse wave is considered as a moving wave where oscillations are perpendicular to the direction of the wave.

The transverse waves are found commonly in elastic solids, oscillations, etc. The waves generated by moving a spring toy up and down is transverse wave.

Thus the correct option is C.

To know more about transverse wave, visit;

https://brainly.com/question/13863548

#SPJ2

Answer:

When it is more reactive according to the reactivity series.

Explanation:

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\[/tex]

1 kg = 1000 g

2.06 kg = 2060 g

1 L = 1000 cm³

2 L = 2000 cm³

mass = 2060 g

volume = 2000 cm³

We have

[tex]density = \frac{2060}{2000} = \frac{103}{100} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

The density of milk is 1.03 g/cm³.

Explanation:

Given data:

Volume of milk = 2.00 L

Mass of milk = 2.06 kg

Density of milk = ?

Solution:

We know that density is equal to the mass divided by volume.

we will convert the unit first because we require the density in g/cm³.

2.06 kg ×1000 g/ 1 kg = 2060 g

2.00 L × 1000 mL / 1L = 2000 mL

d = m/v

d = 2060 g/2000 mL

d = 1.03 g/mL

mL = cm³

d = 1.03 g/cm³

Thus, density of milk is 1.03 g/cm³.

Answer:

The answer is A!!!

Explanation:

just took the quiz on edge:)

Answer:

The answer that you are looking for is A.) wool, silkworm cocoon, and cellulose

Explanation:

I got it right on edge 2020. 100%

Answer:

The way its parts are arranged

Explanation:

it will become a solution.hope this helps!

Answer:

Asexual reproduction

Explanation:

for microorganism to reproduce and spread, the microorganism uses a process of cell division called mitosis, where the microorganism divides it self into two individual microorganism by mitosis using Asexual reproduction (an organism dividing itself into 2 individual organism not involving sexual activities, called Asexual reproduction). for these microorganisms to be able to reproduce Asexually that makes it much faster for these organisms to spread much more faster then mammals of other Sexually reproductive organisms.

Answer:

Most chemical weathering takes place only on the outer surface of a rock. Therefore, rocks with a lot of surface area weather faster than rocks with little surface area. However, if a rock has a large volume as well as a large surface area, it takes longer for the rock to wear down.

Explanation:

Answer:

2nd one and last one

Explanation:

im just that smart

Answer:

DDT (dichloro-diphenyl-trichloroethane) was developed as the first of the modern synthetic insecticides in the 1940s. It was initially used with great effect to combat malaria, typhus, and the other insect-borne human diseases among both military and civilian populations.

Ozone is a naturally occurring molecule. An ozone molecule is made up of three oxygen atoms. It has the chemical formula O3.

Explanation:

It is commonly used as a fire extinguishing agent. The reason it has so much ozone depleting potential is because it contains bromine, which has many times the ozone depleting potential of chlorine.

Answer:

D. The kinetic energy is greater after a substance changes from a

solid to a liquid

Explanation:

During a phase change from solid to liquid, the particles making up the mobile becomes more mobile and as a result there is an increase in kinetic energy of the system.

Answer:

D. The kinetic energy is greater after a substance changes from a solid to a liquid

Explanation:

Benzene reacts with concentrated sulfuric acid to form benzene sulfonic acid .

The reaction attached

Answer:

See below ~

Explanation:

TRUE. BECAUSE : When an atom gains electrons (which are negatively charge), the ion formed is negatively charged and is called an anion. If an atom loses electrons, the ion formed in positively charged and is called a cation.

Answer:

lower

Explanation:

For a spontaneous process, the standard Gibbs free energy change has to be less than zero:

∆G° < 0 → spontaneous

∆G° > 0 → non- spontaneous

∆G° = 0 → system is at equilibrium

For a negative change in standard Gibbs free energy, the Gibbs free energy of the products has to be lower than that of the reactants since Gibbs free energy change is the standard Gibbs free energy of products minus that of the reactants.

[tex]\boxed{∆G= G°(products) -G°(reactants)}[/tex]

Mathematical derivation:

G°(products) -G°(reactants) < 0

G°(products) < G° (reactants)

✩ Note that in the image attached, the Gibbs free energy change is usually denoted by a single-headed arrow, from reactants to products.

What is free energy?

Standard state conditions

Spontaneity

Answer:

Explanation:

if you are wondering how you say that, you say "why the cat sits on the stove" but if it's a random question that has no sense to it my answer to you would be the cat needs some love and heat, the stove is the hottest thing it has right now. Give it some love!

Answer:

Earthquakes occur on faults - strike-slip earthquakes occur on strike-slip faults, normal earthquakes occur on normal faults, and thrust earthquakes occur on thrust or reverse faults. I hope this helps you :)

Answer:

o cany give because of i am in 9th

The mass of hydrogen reacted with nitrogen to give ammonia is 0.1 grams.

Mass of any substance will be calculated by using the moles as:

n = W/M, where

W = required mass

M = molar mass

Given chemical reaction is:

3H₂ + N₂ → 2NH₃

Moles of 0.575 g of NH₃ will be calculated as:

n = 0.575g / 17.03g/mol = 0.033 moles

From the stoichiometry of the reaction, it is clear that:

2 moles of NH₃ = produced by 3 moles of H₂

0.033 moles of NH₃ = produced by 3/2×0.033=0.0495 moles of H₂

Now we calculate the mass of hydrogen from the given moles and molar mass as:
W = (0.0495mol)(2.0158g/mol) = 0.09 grams = 0.10 grams

Hence, option (a) is correct i.e. 0.1 grams.

To know more about moles, visit the below link:

https://brainly.com/question/15374113

Answer:

a

Explanation:

An item which is experiencing a phase change is water boiling in a tea kettle.

The conversion of matter from one  state to another is called as phase change.The process is accompanied by a large amount of energy being evolved or absorbed during the process. It also depends on factors like temperature and pressure.

Each form of matter has it's own characteristic properties like specific heat, melting and boiling points . There are eight thermal processes through which matter undergoes phase change. They are as  follows:1) freezing 2) melting  3)vaporization 4)condensation 5)sublimation 6)deposition 7)ionization 8) recombination.

These eight phases exist at different temperatures  and pressures.The heat transfer process takes place in three ways which are conduction, convection and radiation.

Learn more about phase change, here:

https://brainly.com/question/671212

#SPJ5

The salivary amylase did not perform well if the pH becomes lower because it needs neutral pH for performing its functions.

We can say that the salivary amylase did not perform their function very well within the stomach due to unfavourable environment such as lower pH. Due to lower pH, the enzyme structure is damaged so unable to perform its function so we can conclude that the salivary amylase did not perform well if the pH becomes lower.

Learn more about pH here: https://brainly.com/question/172153

Answer:

Three Oxygen atoms gains two electrons each ( total of six) from two Al atoms, each Al atom loses three electrons (total of six) to three oxygen atom , in this process each Al atom becomes Al3+ ion and Oxygen atom after gaining two electrons becomes O2− ion

Explanation:

Three Oxygen atoms gains two electrons each ( total of six) from two Al atoms, each Al atom loses three electrons (total of six) to three oxygen atom , in this process each Al atom becomes Al3+ ion and Oxygen atom after gaining two electrons becomes O2− ion

Answer:

I think it is called a Mixture

Explanation:

Sorry if it is wrong

Color change, formation of a precipitate, formation of a gas, odor change, temperature change is the correct answer

What is Chemical Indicator ?

Chemical indicators are substances that change color in response to changes in a chemical environment, such as changes in pH, temperature, or the presence of certain ions. They are commonly used in a variety of applications, such as quality control in manufacturing, medical diagnostics, and laboratory research. There are many different types of chemical indicators, including pH indicators, which change color in response to changes in the acidity or alkalinity of a solution, and redox indicators, which change color in response to changes in the oxidation state of a substance.

To learn more about the Chemical Indicators , click the given link ; https://brainly.com/question/30038798

#SPJ1

Answer:

they're all right

Explanation:

on edge

Answer:

0.39 is the answer!