help me get a answer ​

Answer:

Explanation:

A television set is plugged into a 120 V outlet. The television circuit carries a current equal to 0.75 A. What is the overall resistance of the television set?​

V = IR

120 volt = 0.75A * R

R = 160 Ω

Answer:

p = rho× g × h

Explanation:

p: pressure

rho : density

g : gravity acceleration

h : height

Answer:

A bar of soap when weighed in air has a weight of 5,2N . When completely immersed in water , however it has a weight of 3,7N . What is the volume of the bar of soap

Answer:

If an object is electrically neutral it has no net charge becuase it has the same number of protons as it does electrons, which are opposite charges that offset each other. No, that just means that the sum of all its positive and negative amounts of charge equals zero.

Explanation:

The momentum, in the x-direction, that was transferred to the more massive cart after the collision is 19.38 kgm/s.

The momentum transfered to the more massive cart is determined by applying the principle of conservation of linear momentum as shown below;

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

where;

⁻ΔP₁ = ΔP₂

ΔP₂ = m₂v₂ - m₂u₂

ΔP₂ = m₂(v₂ - u₂)

ΔP₂ = 3m₁(v₂ - u₂)

ΔP₂ = 3 x 3.8 x (1.7 - 0)

ΔP₂ = 19.38 kgm/s

Thus, the momentum, in the x-direction, that was transferred to the more massive cart after the collision is 19.38 kgm/s.

The complete question is beblow

A cart of mass 3.8 kg is traveling to the right (which we will take to be the positive x-direction for this problem) at a speed of 6.9 m/s. It collides with a stationary cart that is three times as massive. After the collision, the more massive cart is moving at a speed of 1.7 m/s, to the right.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

All of the following are examples of physical properties except tearing.

This is used to describe the state of a physical system and is usually measurable.

Examples include:

Tearing isn't an example of a physical property which was why option A was chosen as the most appropriate choice.

Read more about Physical property here https://brainly.com/question/17436856

Answer:

electromagnetic radiation moves at the speed of light

Answer:

C

because urine is waste product

The final temperature of the mixture is 33.123 °C.

Temperature can be defined as the hotness or coldness of a thing or place.

To calculate the final temperature of the mixture, we use the formula below.

Formula:

Where:

make t₃ the subject of the equation

From the question,

Given:

Substitute these values into equation 2

Hence, The final temperature of the mixture is 33.123 °C.

Learn more about temperature here: https://brainly.com/question/24746268

Answer:

For B it is 0

Explanation:

I think

Question :-

Answer :-

Explanation :-

As per the provided information in the given question, The Resistance is given as 330 Ohm . The Voltage is given as 5 Volt . And, we have been asked to calculate the Current .

For calculating the Current , we will use the Formula :-

[tex] \bigstar \: \: \: \boxed{ \sf{ \: Current \: = \: \dfrac{Voltage}{Resistance} \: }} [/tex]

Therefore , by Substituting the given values in the above Formula :-

[tex] \dag \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]

[tex] \longmapsto \: \: \: \sf {Current \: = \: \dfrac {5}{330} } [/tex]

[tex] \longmapsto \: \: \: \sf {Current \: = \: \dfrac {1}{66} } [/tex]

[tex] \longmapsto \: \: \: \textbf {\textsf {Current \: = \: 66 }} [/tex]

Hence :-

[tex] \underline {\rule {180pt} {4pt}} [/tex]

Additional Information :-

[tex] \Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]

[tex] \Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]

[tex] \Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]

The material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.

Latent heat is defined as the thermal energy absorbed or released during a phase change of a substance.

Latent heat can also be explained as the energy in hidden form which is supplied or extracted to change the state of a substance without changing its temperature.

From the above explanation, we can conclude that, the material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.

Learn more about latent heat here: https://brainly.com/question/87248

The angular momentum is 200 kg m^2 s^-1

Angular momentum is the product of  linear momentum and the perpendicular distance. Linear momentum is the product of mass and velocity, where radius is the perpendicular distance

Angular momentum = mass * velocity * radius

Angular momentum = 5 * 2 * 20

Angular momentum = 200 kg m^2 s^-1

read more about angular momentum here: https://brainly.com/question/4126751

Answer:

Isaac Newton came up with the 3 Laws of Motion

Answer:

Isaac Newton came up with three laws of motion

B. kilogram

I hope this helps you

:)

Answer:

B. kilogram

Explanation:

When stated in the unit J s, which is equal to kg m2 s1, the kilogram (kg) is defined by considering the fixed numerical value of the Planck constant h to be 6.62607015 1034 when expressed in the unit J s, which is equivalent to kg m2 s1. The United States Prototype Kilogram 20, a platinum-iridium cylinder held at NIST, is the country's principal mass standard. The kilogram was initially known as the Kilogram of the Archives, and it was defined as the mass of one cubic decimeter of water at its greatest density temperature. It was superseded by the International Prototype Kilogram following the International Metric Convention in 1875, which became the unit of mass without reference to the mass of a cubic decimeter of water or the Archives Kilogram. National Prototype Meters and Kilograms were allocated to each country that signed the International Metric Convention. Learn more about the kilogram's history and current definition. The kilogram (kg) is the only SI basic unit whose name and symbol incorporate a prefix for historical reasons. The SI prefix for 1000 or 103 is "kilo." Prefix names and symbols are attached to the unit name "gram," and prefix symbols are attached to the unit symbol "g," to create names and symbols for decimal multiples and submultiples of the unit of mass. Find out more about this historical oddity.

Units of Mass

10 milligrams (mg) = 1 centigrams (cg)

10 centigrams = 1 decigrams (dg) = 100 milligrams

10 decigrams = 1 gram (g)

10 decigrams = 1000 milligrams

10 grams = 1 dekagrams (dag)

10 dekagrams = 1 hectogram (hg)

10 dekagrams = 100 grams

10 hectograms = 1 kilogram (kg)

10 hectograms = 1000 grams

1000 kilograms = 1 megagram (Mg) or 1 metric ton (t)

A body's mass is a measurement of its inertial property, or the amount of stuff it contains. The force imposed on a body by gravity or the force required to maintain it is measured by its weight. On Earth, gravity accelerates a body downward at around 9.8 m/s2. In the context of weights and measurements, weight is frequently used as a synonym for mass. The verb "to weigh," for example, meaning "to ascertain the mass of" or "to have a mass of." Weight should be phased out in favor of mass, and the term mass should be used when mass is indicated. The kilogram is the SI unit of mass (kg). The weight of a body in a given reference frame is defined in science and technology as the force that causes the body to accelerate at the same rate as the local acceleration of free fall in that reference frame. As a result, the newton is the SI unit for the amount weight defined in this way (force) (N).

Voltage = 5 volts

[tex]\sf \dfrac{number \ of \ turns \ in \ primary \ coil}{voltage\ in \ primary \ coil} = \dfrac{number \ of \ turns \ in \ secondary\ coil}{voltage\ in \ secondary\ coil}[/tex]

[tex]\hookrightarrow \sf \dfrac{400}{100} = \dfrac{20}{V_2}[/tex]

[tex]\hookrightarrow \sf 400V_2}{} = 20*100[/tex]

[tex]\hookrightarrow \sf V_2 = 5 V[/tex]

Answer:

did you get it done if not lmk I will help you out tomorrow when I get up

Answer:

Explanation:

I don't think so. Think about it. To compress the volume by a factor of 2 it takes 956 Joules.

Now you come along and you want to get the pressure for 1/12 of the volume. It's going to take a huge pressure to do that.

I would suggest that you have to use a modified form of the formula.

PV = 956

You need to compress the volume by 1/6

P(V/6) = 956

6 * PV/6 = 6 * 956

PV = 5736 J

Why did I only take 1/6? Because. 956 represents the pressure needed for 1/2 the volume. You need to multiply 1/2 * 1/6 to get 1/12

Given that the function of the wave is f(x) = cos(π•t/2), we have;

a. The graph of the function is attached

b. 4 units of time

c. Even

d. 4.935 J/kg

e. 1.234 W/kg

a. Please find attached the graph of the signal created with GeoGebra

b. The period of the signal, T = 2•π/(π/2) = 4

c. The signal is even, given that it is symmetrical about the y-axis

d. The energy of the signal is given by the formula;

[tex] \frac{1}{2} \cdot \mu^{2} \cdot \omega ^{2} \cdot \: {a}^{2} \times \lambda[/tex]

Which gives;

E = 0.5 × 1.571² × 1² × 4 = 4.935 J/kg

e. The power of the wave is given by the formula;

E = 0.5 × 1.571² × 1² × 4 × 0.25 = 1.234 W/kg

Learn more about waves here:

https://brainly.com/question/14015797

The type of heat transfer occurs in your stomach when you eat hot soup and an ice cold beverage is Conduction.

This is the process by which heat energy is transmitted through collisions between neighboring atoms or molecules.

This happens when they are in close contact with each other which was why Conduction was chosen as the most appropriate choice.

Read more about Conduction here https://brainly.com/question/893656

The magnitude of the force each plate experiences due to the other plate as a function of V, the potential drop across the capacitor is determined as [tex]\frac{V^2 A \varepsilon _o }{2d^2}[/tex].

The magnitude of the force each plate experiences due to the other plate is determined as follows;

F = U/d

where;

[tex]F = \frac{1}{2} \frac{Q^2}{C} \times \frac{1}{d} \\\\[/tex]

Q = CV

[tex]F = \frac{1}{2} \frac{C^2V^2}{C d} = \frac{CV^2}{2d}[/tex]

where;

The capacitance is given as;

[tex]C = \frac{\varepsilon _o A }{d}[/tex]

[tex]F = \frac{\varepsilon _o A }{d} \times \frac{V^2}{2d} \\\\F = \frac{V^2 A \varepsilon _o }{2d^2}[/tex]

Thus, the magnitude of the force each plate experiences due to the other plate as a function of V, the potential drop across the capacitor is determined as [tex]\frac{V^2 A \varepsilon _o }{2d^2}[/tex].

Learn more about capacitance of parallel plate capacitors here: https://brainly.com/question/13578522

The balloon will attach to the wall because the balloon's negative charges will drive the electrons in the wall to shift to the other side of their atoms, leaving the wall's surface positively charged.

If a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr. Details about average speed can be found below.

Average speed can be calculated by dividing the distance moved by a body by the time taken. That is;

Average speed = Distance/Time

According to this question, a jogger runs a 10 kilometer race in 60 minutes. The average speed is calculated as follows:

Average speed = 10km/1hr

Average speed = 10km/hr.

Therefore, if a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr.

Learn more about average speed at: https://brainly.com/question/12322912

Answer:

50 N

Explanation:

Let the natural length of the spring = L

so

100 = k(40 - L)       (1)

200 = k(60 - L)       (2)

(2)/(1):   2 = (60 - L)/(40 - L)

60 - L = 2(40 - L)

60 - L = 80 - 2L

2L - L = 80 - 60

L = 20

Sub it into (1):

100 = k(40 - 20) = 20k

k = 100/20 = 5 N/in

Now

X = k(30 - L) = 5(30 - 20) = 50 N

Alpha

I hope this helps you

:)

The si unit of force is newton.

so, F is eqal to m*g

Answer:

F=ma

Explanation:

force is actually a derived quantity

newton is a unit derived from kg.m/s^2

This is from Newton's second law of motion

F=ma

(a) The force diagram of a coaster sitting under a cup of coffee includes the weight of the coater plus the weight of coffee acting downwards.

(b) The force diagram of a car slowing down as it approaches a stop sign includes force of the car and frictional force opposing the motion.

(c) The force diagram includes the force of the test and action of the fridge which are eqaul and opposite.

(d) The force diagram of baseball before it leaves the bat incudes only the weight of the baseball acting downwards.

The force diagram of a coaster sitting under a cup of coffee includes the weight of the coater plus the weight of coffee acting downwards.

                                        ↑ Fn

                                        Ф                  Fn = W

                                        ↓ W

Where;

The force diagram inlcudes the applied force and frictional force opposing the motion.

                                      Ff ←  Ф  → F

where;

The force diagram includes the force of the test and action of the fridge which are eqaul and opposite.

                               Fb ←  Ф → Fa

where;

The force diagram includes only the weight of the baseball acting downwards.

                                 Ф

                                  ↓

                                 W = mg

Learn more about force diagrams here: https://brainly.com/question/3624253

Explanation:

formula is ˠ=vf

f=1/T

1/7

f=0.14

wavelength=27Ⅹ0.14

=3.78m

OR

7Ⅹ27

=189m