A slide projector has a magnification of 50. How wide will the projected image be if the slide is 2.8 cm wide?
Answer:
hi = 12mm or 1.2cm
Explanation:
XOXO
Kit ^w^
A slide projector has a magnification of 50. 12mm or 1.2cm.
What is Magnification?Bringing an object as close to the eye as feasible when wishing to observe an object's details is instinctual. The angle that an object subtends at the eye increases with proximity to the eye, making it appear larger.
However, if an item is too near, the eye will no longer be able to generate a distinct image. The creation of a "virtual image" that may be comfortably observed is made possible by the use of a magnifying lens between the observer and the object.
The magnifier should be positioned exactly in front of the eye to provide the clearest image possible. Once a clear image of the thing is present, the object of interest is brought closer to the eye.
Therefore, A slide projector has a magnification of 50. 12mm or 1.2cm.
To learn more about magnification, refer to the link:
https://brainly.com/question/28957672
#SPJ2
Which statements about nonrenewable resources are correct? Check all that apply.
Nonrenewable resources form rapidly.
Even though fossil fuels can still form in nature, fossil fuels are considered nonrenewable resources.
Nonrenewable resources include cotton and wool.
Nonrenewable resources are in limited supply.
Once nonrenewable resources run out, they cannot be replaced.
Answer:
Nonrenewable resources are in limited supply.
Once nonrenewable resources run out, they cannot be replaced.
Even though fossil fuels can still form in nature, fossil fuels are considered nonrenewable resources.
Answer:
Even though fossil fuels can still form in nature, fossil fuels are considered nonrenewable resources. Nonrenewable resources are in limited supply. Once nonrenewable resources run out, they cannot be replaced.
Explanation:
What is the starting and final form of energy for someone playing the piano
When electromagnetic (EM) radiation is explained using the particle model, which particle-like behavior could be described?
a. EM radiation has a wavelength.
b. EM radiation has a frequency.
c. EM radiation can exhibit interference patterns.
d. EM radiation can move through space without a medium.
Answer:
EM radiation has a wavelength.
Explanation:
When electromagnetic (EM) radiation is explained using the particle model, the EM radiation has a wavelength.
According to De Broglie, all matter has an associated wavelength which is better known as the De Broglie wavelength.
This wavelength is given by; given by λ=h/p
Where;
p = mv
h = Plank's constant
m= mass of the body
v = velocity of the body
p = momentum of the body
Electromagnetic energy travels in waves and spans a broad spectrum from very long radio waves to very short gamma rays.Electromagnetic radiation has a wavelength.
What is electromagnetic waves?Electromagnetic energy travels in waves and spans a broad spectrum from very long radio waves to very short gamma rays
When electromagnetic (EM) radiation is explained using the particle model, the EM radiation has a wavelength.
According to De Broglie, all matter has an associated wavelength which is better known as the De Broglie wavelength.
This wavelength is given by; given by
[tex]\lambda=\dfrac{h}{p}[/tex]
Where;
p = mv
h = Plank's constant
m= mass of the body
v = velocity of the body
p = momentum of the body
Hence Electromagnetic energy travels in waves and spans a broad spectrum from very long radio waves to very short gamma rays.Electromagnetic radiation has a wavelength.
To know more about electromagnetic waves follow
https://brainly.com/question/1968356
What happens to the force between two charges when each charge is doubled and the distance between them is 1/4 its original
magnitude?
Answer:
F' = 64 F
Explanation:
The electric force between charges is given by :
[tex]F=\dfrac{kq_1q_2}{r^2}[/tex]
Where
q₁ and q₂ are charges
r is the distance between charges
When each charge is doubled and the distance between them is 1/4 its original magnitude such that,
q₁' = 2q₁, q₂' = 2q₂ and r' = (r/4)
New force,
[tex]F'=\dfrac{kq_1'q_2'}{r'^2}[/tex]
Apply new values,
[tex]F'=\dfrac{k\times 2q_1\times 2q_2}{(\dfrac{r}{4})^2}\\\\=\dfrac{k\times 4q_1q_2}{\dfrac{r^2}{16}}\\\\=64\times \dfrac{kq_1q_2}{r^2}\\\\=64F[/tex]
So, the new force becomes 64 times the initial force.
If we want to apply Gauss's Law on an infinite length line of charges, how much open surfaces we can obtain in the closed cylindrical Gaussian surface?
Answer:
2
Explanation:
There are two open surfaces obtained in a closed cylindrical Gaussian surface when we apply Gauss's Law on an infinite length line of charges. The two surfaces are the upper circular base and the lower circular base.
Moreover, Gauss Law states that the net electric flow outside to a closed surface is proportional to the electric charge within the closed surface.
Explain why there is a voltage between the two terminals of the secondary coil
Answer:
The coils are not electrically connected. ... the primary coil current produces a magnetic field, which changes as the current changes. the iron core increases the strength of the magnetic field. the changing magnetic field induces a changing potential difference (voltage) in the secondary coil.
There is a voltage between the two terminals of the secondary coil because the magnetic field/magnetic flux is strengthened by the iron core. The secondary coil's potential difference (voltage) changes as the magnetic field changes. Energy is transferred by law of conversation .
What is magnetic flux?
Magnetic flux is the number of magnetic field lines passing through a closed surface.
What is electromagnetic induction?There is a change in magnetic flux associated with a coil it gives rise to an induced current and hence an induced EMF in the coil. This phenomenon is called electromagnetic induction.
What is law of conservation of energy?Law of conservation of energy states that energy can neither be created nor be destroyed . It can only be converted from one form to another form.
To know more about electromagnetic induction here
https://brainly.com/question/24214683
#SPJ2
__________ is the
process by which populations change over
time.
Evolution, is a process that results in changes in the genetic material of a population over time.
Can someone please help me with science
Answer:
Gravity as well as electrostatic and magnetic attraction and repulsion provide real life examples of forces being exerted by one object on another without them being in contact with each other.
Explanation:
Hope that helps!:)
What could you have done to reduce those errors?
an archer shot a 0.06 kg arrow at a target. the arrow accelerated at 5,000 m/s^2 as it left the bow.
What is the force of the arrow?
Answer:
The force of the arrow was 300N.
Explanation:
Geologists know the past temperature of the planet based on rock and fossil evidence. Why do you think it is difficult to determine what has caused climate change in the distant past?
Answer:
I think it is difficult to determine what has caused climate change in the distant past because it must have been a long time ago so geologists can't carry out different experiments and figure out what gases the planet had conjured, so geologists can only make predictions based off the evidence they currently have from what the planet looked like before. The planet must have changed over the years, therefore the climate has also changed in the future, so they cannot work with how the planet looked in the past.
A 2kg rock is dropped from a height of 10m and hits the ground going 11m/s. How much work was done by air resistance as it fell?
Answer: 0.24 kg/m
Explanation: use k = ρ * A * C / 2 as the formulaThis problem has been solved! See the answer A 21.5 kg person climbs up a uniform 85 N ladder. The upper end of the ladder rests on a frictionless wall. The bottom of the ladder rests on a floor with a rough surface. The angle between the horizontal and the ladder is 59 ◦. The person can climb 78 % up the ladder before the base of the ladder slips on the floor. What is the coefficient of static friction µs between the base of the ladder and the floor? The acceleration of gravity is 9.8m/s 2 .
Answer:
μ = 0.179
Explanation:
For this exercise we use the rotational equilibrium condition, where we set a reference system at the top of the ladder where it is in contact with the parent, we will assume the counterclockwise rotations as positive
∑ τ = 0
W_stairs x/2 + W_man x’+ fr y - N x = 0
fr y = -W_stairs x/2 - W_man x’ + N x
let's use trigonometry for distances
* the man up the ladder 78%
l ’= 0.78 L
cos 59 = x ’/ l’
x’= 0.78 L cos 59
* the horizontal distance
cos 59 = x / L
x = L cos 59
* vertical distance
sin 59 = Y / L
y = L sin 59
we substitute
fr L sin 59 = -W_stairs Lcos59 / 2 - W_man 0.78 L cos59 + N L cos59
fr sin 59 = - ½ W_stairs cos 59 - 0.78 W_man cos 59 + N cos 59
fr = ctan 59 (N - ½ W_stairs - 0.78 W_man) (1)
Let's write the translational equilibrium equations
Y axis
N -W_stairs - W_man = 0
N = W_stairs + W_man
N = 85 + 21.5 9.8
N = 295.7 N
we substitute in 1
fr = ctg 59 (295.7 - ½ 85 - 0.78 21.5 9.8)
fr = 0.6 (295.7 - 42.5 - 164.346)
fr = 52.89 N
the expression for the friction force is
fr = μ N
μ = fr / N
μ = 52.89 / 295.7
μ = 0.179
A wave has a wavelength of 0.98 m and travels 2.0x10^2 m in 0.78 s. What is the frequency of the wave?
Answer:
261.64 hz
Explanation:
speed = distance/ time
s= 200/0.78= 256.41 ms^-1
by using v= (f) x ( lambda)
256.41/ 0.98 = f = 261.64 hz
The frequency of the wave with the given wavelength, traveling the given distance at the given time is 261.6 Hertz.
What is the frequency of the wave?
Wavelength is the distance over which the shapes of waves are repeated.
From the wavelength, frequency and speed relation,
λ = v ÷ f
Where λ is wavelength, v is velocity/speed and f is frequency.
Given that;
Wavelength λ = 0.98mDistance traveled d = 2.0×10²mTime elapsed t = 0.78sFrequency = ?First, we determine the speed.
Speed = Distance / time
Speed = 2.0×10²m / 0.78s
Speed = 256.4m/s
Now, we find the frequency.
λ = v ÷ f
f = v ÷ λ
f = 256.4m/s ÷ 0.98m
f = 261.6s⁻¹
f = 261.6Hz
Therefore the frequency of the wave with the given wavelength traveling the given distance at the given time is 261.6 Hertz.
Learn more about Speed, Frequency and Wavelength here: brainly.com/question/27120701
#SPJ2
X=Y=MC scourer that would be the answer for you mam or sir
Me das mas información?
Answer:
jello
Explanation:
it jiggles
When heat is added to ice, the first change it goes through will be which of the following?
It will begin to boil.
It will melt into a liquid.
It will turn into steam.
It will become a vapor.
Answer:
it will begin to melt into a liquid
Explanation:the ice will melt first before turning into a liquid.
please help me out on this...
Only dogs
Only reptiles
Both cats and dogs
Both amphibians and reptiles
Why is this statement false?
As the temperature of water is decreased from 4C to 0C contraction occurs.
The statement is false because as the temperature of water is decreased from 4C to 0C, expansion occurs.
You should understand that this is very weird behavior for any compound ... within a small temperature range, the stuff actually gets bigger as it gets colder. That's why cubes float in your sody, and bergs float in the ocean.
Water is one of only two known substances that do this. And if water didn't do it, then life on Earth would not be possible.
Hmmm....
There is not contraction, Instead expansion occurs .
We know density of water is temperature dependant .
at 4°C water has max density so least volume as density is indirectly proportional to volume.
at 0°C density decreases so volume increases
A 0.035 bullet strikes a 5kg wooden block that is stationary and gets stuck inside the block. The block and bullet move together at 8.6 m/s. What is the initial velocity of the bullet?
Answer:
1240 m/s
Explanation:
[Do you mean 0.035 kg bullet?]
Since the momentum of the system is conserved,
Let u m/s be the initial velocity of the bullet
0.035u = 8.6(5+0.035)
u ~= 1237.1714 m/s
u = 1240 m/s (3 sig. fig.)
is doc mcstuffins the best
pretty cool not gonna lie
The charges of two particles are as follows: Q1=2 x 10 -8 C and Q2 = 3 x 10 -7 C. Find the magnitude of the force between these charges if Q1 is located at (2, 5, 1) and Q2 is located at (3, 2, 3).
Answer:
F = 3.86 x 10⁻⁶ N
Explanation:
First, we will find the distance between the two particles:
[tex]r = \sqrt{(x_{2}-x_{1})^2+(y_{2}-y_{1})^2+(z_{2}-z_{1})^2}\\[/tex]
where,
r = distance between the particles = ?
(x₁, y₁, z₁) = (2, 5, 1)
(x₂, y₂, z₂) = (3, 2, 3)
Therefore,
[tex]r = \sqrt{(3-2)^2+(2-5)^2+(3-1)^2}\\r = 3.741\ m\\[/tex]
Now, we will calculate the magnitude of the force between the charges by using Coulomb's Law:
[tex]F = \frac{kq_{1}q_{2}}{r^2}\\[/tex]
where,
F = magnitude of force = ?
k = Coulomb's Constant = 9 x 10⁹ Nm²/C²
q₁ = magnitude of first charge = 2 x 10⁻⁸ C
q₂ = magnitude of second charge = 3 x 10⁻⁷ C
r = distance between the charges = 3.741 m
Therefore,
[tex]F = \frac{(9\ x\ 10^9\ Nm^2/C^2)(2\ x\ 10^{-8}\ C)(3\ x\ 10^{-7}\ C)}{(3.741\ m)^2}\\[/tex]
F = 3.86 x 10⁻⁶ N
Does anybody know this ???
Una pelota recorre 20 m hacia la derecha y luego 10 m hacia la izquierda, todo en un lapso de tiempo de 10 s , cual es si velocidad y rapidez?
Answer:
v = 1 i ^ m / s, v = 1 m / s
Explanation:
In this problem we show the difference between vectors and scalars.
The average speed is
v = Δx / Δt
The bold are vectors
Δx = 20-10 = 10 i^ m
v = 10/10
v = 1 i ^ m / s
the unit vector indicates that the velocity is on the x-axis
The average speed is
v =Δx / Δt
v = 10/10
v = 1 m / s
in this case we have a scalar
Ocean breezes are due to which method of heat transfer?
A. conduction
B. convection
C. greenhouse gases
D. radiation
E. geothermal energy
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. The correct option is B.
What is convection?Convection is a method of heat transfer that occurs in fluids (liquids and gases) and involves the movement of material carrying thermal energy. In convection, heat is transferred by the movement of hot fluid from one place to another, which then causes the transfer of heat from the hot fluid to the cooler fluid or surface it comes into contact with.
Convection can occur in two ways:
Natural convection: It occurs due to the density differences caused by temperature variations within a fluid. When a fluid is heated, its density decreases, making it lighter and causing it to rise. As it rises, it cools, becomes denser and falls back down, creating a cycle that is known as a convection current.
Forced convection: In this type of convection, a fluid is forced to flow over a surface or through a channel, by an external agent like a fan or pump. The forced flow enhances the rate of heat transfer from the surface or through the channel, as compared to natural convection, where the fluid flow is driven only by buoyancy forces.
Convection is a very important process for heat transfer in many natural and industrial applications, including heating and cooling systems, meteorology, oceanography, and more.
Here in the Question,
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. As the sun heats up the surface of the ocean, the air above it also heats up and rises. This creates a low pressure area that draws in cooler air from over the land, resulting in a breeze that blows from the ocean towards the shore. This is why sea breezes are generally felt during the day, when the land is warmer than the sea, and why they tend to die down at night, when the opposite occurs.
Therefore, The correct answer is B i.e convection.
To learn about the difference between conduction and convection click:
https://brainly.com/question/13104912
#SPJ7
what is vector product B×A of two vectors A=7i+4j-8k and B=3i-3j+5k
Answer:
[tex]4i+59j+33k[/tex]
Explanation:
Given that,
Vector A = 7i+4j-8k
vector B = 3i-3j+5k
We need to find B×A. It can be calculated as follows :
[tex]B\times A=(3i-3j+5k)\times (7i+4j-8k)\\\\=i (24 - 20) - j (-24 - 35) + k (12 + 21) \\\\=4i+59j+33k[/tex]
So, the value of vector product is [tex]4i+59j+33k[/tex].
If you add more hot water than cold water, will the temperature of the cold water change more?
Answer:
Yes because of the temputer
Explanation:
yes cause of the tempture
Which chemical change describes the reactions of elements and compounds that, in general, do not involve carbon and typically take place in laboratories or industries?
Answer:
Inorganic.
Explanation:
The chemical change which describes the reactions of elements and compounds that, in general, do not involve carbon and typically take place in laboratories or industries is inorganic.
In Chemistry, an inorganic chemical reaction can be defined as a type of chemical reaction that occurs without a carbon-hydrogen bond.
On the other hand, organic chemistry deals with reaction that occur in the presence of carbon-hydrogen bonds such as hydrocarbons.
What can astronomical objects that have changing magnetic fields do
ok byy make me brilliant
Escriba un texto sobre el significado que ha tenido para la humanidad la utilización de la electricidad
Explanation:
La electricidad fue uno de los mayores inventos tecnológicos y científicos del mundo que permitió una gran evolución de la sociedad.
Es a través de la electricidad que podemos realizar tareas que parecen tan habituales en la actualidad, como usar luz eléctrica, usar internet, conservar alimentos, tomar baños calientes, y otras tareas que forman parte de la rutina diaria de miles de personas alrededor del mundo. mundo.
Por tanto, es importante observar en un contexto general cómo la electricidad ha traído beneficios a la humanidad, como la conservación de los alimentos por ejemplo, que ha facilitado la vida cotidiana.
En el entorno empresarial, la electricidad posibilitó la creación de máquinas, la automatización del trabajo, lo que facilita las funciones de los empleados, aumenta la seguridad de la empresa, permite el crecimiento empresarial y la aparición de muchos productos y servicios que existen en la economía actual.
En medicina ayudó en el tratamiento de enfermedades, en la creación de medicamentos, etc.
En la sociedad, la electricidad hace posible el saneamiento, permite una mejor calidad de vida para las personas, un mayor intercambio de información y varios otros desarrollos que tienen un impacto directo en la vida de cualquier persona.