Half-reaction for the oxidation of the manganese in MnCO3 to MnO2 in neutral groundwater is : MnCO₃ + 2H₂O → MnO₂ + HCO₃⁻ + 2e- + 3H+
What is half reaction?A half-reaction is the part of overall reaction that represents, either oxidation or a reduction.
MnCO₃ → MnO₂ + HCO₃⁻
This equation is not balanced.
Oxidation number of Mn changes from +2 in MnCO₃ to +4 in MnO₂ , thus two electrons must be added to the right.
Then the equation becomes; MnCO₃ → MnO₂ + HCO₃⁻ + 2e-
In terms of electrons, now the reaction is balanced. But, in terms of charges it is not.
In reactant side, total charge = 0 and in the product side, total charge = -1 + (-2) = -3
To balance the excess negative charge, add add 3 H+ on the product side; MnCO₃ → MnO₂ + HCO₃⁻ + 2e- + 3H+
In terms of charges, now the reaction is balanced but in terms of atoms it is not.
There is excesses of Hydrogen and Oxygen atoms. So, to balance this, add H20 to the reactant side to balance H and O atoms
This gives; MnCO₃ + 2H₂O → MnO₂ + HCO₃⁻ + 2e- + 3H+
Now, the equation is balanced.
To know more about half reaction, refer
https://brainly.com/question/2491738
#SPJ1
hybridization is the process of mixing atomic orbitals as atoms approach each other to form a bond.
TRUE OR FALSE
the above statement is true which defines the hybridization as The process of blending atomic orbitals as atomic nuclei approach each other to form a bond
The process of blending atomic orbitals as atomic nuclei approach each other to form a bond is known as hybridization. In this process, atomic orbitals of similar energy combine to form new hybrid orbitals that are more stable and have specific geometric shapes. This enables the atoms to form chemical bonds with other atoms in a specific way, which helps to account for the observed molecular geometry of many compounds. The type of hybridization that occurs depends on the number of atoms and electrons involved in the bonding process.
Learn more about atomic orbitals here:
https://brainly.com/question/29561958
#SPJ4
What hybridization do you expect for the atom indicated in each of the following species? Explain. A) CH 3 CO 2 − for the last C B) PH 4 + for P C) AlF 3 for Al D) H 2 C=CH-CH 2 + for the last C
A) CH3CO2 for the last C- sp2 hybridization.
B) PH4+ for P: sp3 hybridization.
C) AlF3 for Al: sp3d2 hybridization.
D) H2C=CH-CH2+ for the last C: sp hybridization.
What is hybridization ?
Hybridization is the process by which atomic orbitals combine to form new hybrid orbitals with different energy levels and geometric shapes. These hybrid orbitals are used to form chemical bonds between atoms. The type of hybridization depends on the number of atoms and lone pairs of electrons surrounding the central atom in a molecule. Some common types of hybridization include sp3 (four orbitals), sp2 (three orbitals), and sp (two orbitals) hybridization.
A) CH3CO2- for the last C: The last C atom in CH3CO2- is bonded to one O atom and two C atoms. In order to form these bonds, the C atom needs to have three orbitals available for bonding, which means it is in sp2 hybridization.
B) PH4+ for P: The P atom in PH4+ is bonded to four H atoms. In order to form these bonds, the P atom needs to have five orbitals available for bonding, which means it is in sp3 hybridization.
C) AlF3 for Al: The Al atom in AlF3 is bonded to three F atoms. In order to form these bonds, the Al atom needs to have six orbitals available for bonding, which means it is in sp3d2 hybridization.
D) H2C=CH-CH2+ for the last C: The last C atom in H2C=CH-CH2+ is bonded to one H atom and one C atom. In order to form these bonds, the C atom needs to have two orbitals available for bonding, which means it is in sp hybridization.
To know more about Hybridization ,visit: https://brainly.in/question/7201042
#SPJ4
there are ________ molecules of methane in 0.123 mol of methane (ch4).
There are 7.4 x 10²² molecules of methane in 0.123 mole of methane (ch4).
Methane is a substance that has the chemical formula CH4 (one carbon atom bonded to four hydrogen atoms). It is the simplest alkane, a group-14 hydride, and the primary component of natural gas. Methane is very abundant on Earth, making it an economically appealing fuel, but due to its gaseous nature at standard temperatures and pressure, its capture and storage present technical problems. Methane is a naturally occurring gas that can be found underground and beneath the bottom.
A mole is a measurement unit for numerous particles (atoms, molecules, and ions), where 1 mole equals the number of particles in a substance as the number of atoms in 12 grams of C-12.
1 mole [tex]= 6.02*10^{23}[/tex] particles
Can be formulated :
N = [tex]n *[/tex] No
N = number of gas particles
No = Avogadro number ([tex]6.02*10^{23}[/tex])
n = number of moles
Input the value :
N [tex]= 0.123 * 6.02*10x^{23}[/tex]
N [tex]= 7.4 * 10^{22}[/tex]
Learn more about methane here
https://brainly.com/question/29196051
#SPJ4
if 75.0 g of water at 30.0°c absorbs 900 calories, the new temperature will be
If 75.0 g of water at 30.0°c absorbs 900 calories, the new temperature will be 42°C.
What is specific heat?In thermodynamics, the specific heat of a substance (symbol cp) is the heat capacity of a sample of the substance divided by the mass of the sample, sometimes called the mass heat capacity. Informally, it is the amount of heat that must be added to a unit mass of a substance to cause a unit temperature rise. The SI unit for specific heat capacity is Joule/Kelvin/Kilogram, J kg⁻¹ K⁻¹. For example, it takes 4184 Joules of heat to raise the temperature of 1 kg of water by 1 K, so the specific heat capacity of water is 4184 J kg⁻¹ K⁻¹.
Q = mcΔT
1 Kcal. = 4184 J
0.9 K Cal. = 4184 × 0.9
0.9 K Cal. = 3765.6 J
3765.6 = 75 × 4.186 × ΔT
ΔT = 3765.6/(75 × 4.186)
ΔT = 3765.6/313.95
ΔT = 11.99
T₂ - T₁ = 11.99
T₂ = 11.99 + T₁
T₂ = 11.99 + 30
T₂ = 41.99°C
T₂ ≈ 42°C
To learn more about specific heat, here:
https://brainly.com/question/11297584
#SPJ4
The complete question is as follows:
if 75.0 g of water at 30.0°c absorbs 900 calories, the new temperature will be ________.
Which of the following is an aromatic compound that contributes to the beautiful scent of bacon? Your answer O a. Me N Me 2,5-dimethylpyrazine O b. Me Me Et 'N 2-ethyl-3,5-dimethylpyrazine O c. Both (a) and (b) O d. Neither (a) and (b)
2,5-dimethylpyrazine (a) is an aromatic compound that contributes to the beautiful scent of bacon.
What is 2,5-dimethylpyrazine?2,5-dimethylpyrazine is a compound that is known to contribute to the smoky, meaty aroma of cooked bacon. It is created by the Maillard reaction, which occurs when the sugars and amino acids in the bacon are heated, creating a complex mixture of flavors and aromas.
2-ethyl-3,5-dimethylpyrazine (b) is not an aromatic compound that contributes to the beautiful scent of bacon. It is a different compound that can be found in other food items, such as coffee, chocolate and roasted nuts.
So the answer is (a) and not (c) or (d)
To know more about aromatic compound visit: https://brainly.com/question/1351407
#SPJ4
categorize the given phrases as descriptions of α‑keratin, collagen, or fibroin.
A robust and pure protein called alpha keratin can find harm in your hair.
What is Alpha Keratin ?Alpha keratin is a strong and pure protein that can hunt out damage in your hair. Once the damage has been located, it bonds to it and fills in any weak areas to make repairs. You'll have gorgeous, unbelievably healthy hair once it repairs damaged hair.
Proteins in the body include collagen (KOL-uh-jin). Numerous biological parts, including the hair, skin, nails, bones, ligaments, tendons, cartilage, blood vessels, and intestines, contain different forms of collagen.
Silk fibres are made up of proteins called fibroins. Even though the precise structural features of the huge, complex proteins that make up the many varieties of silk vary, all fibroins have a few traits. additionally see fibrous proteins.
To learn more about Alpha Keratin refer to:
https://brainly.com/question/28837380
#SPJ4
What happens to the potential energy as the wand moved closer to the VDG?
By bringing the wand close to the generator, you will alter the electric field, increasing the electric potential on the generator. More energy will then be dissipated in any arc or corona discharge.
What is potential energy?Potential energy in physics is the energy that an item retains as a result of its position in relation to other objects, internal tensions, electric charge, or other elements.
Similar to this, when a spring is moved away from its equilibrium position, it gains some energy, which we can notice by the stress our hands experience when we stretch it.
Potential energy is a type of energy that arises from a change in its position or state, according to our definition.
The different types of potential energy are:
Gravitational potential energyElastic potential energyChemical potential energyElectrical potential energyNuclear potential energyLearn more about potential energy here https://brainly.com/question/14427111
#SPJ1
draw tryptophan and select the chiral carbon atom. a selected atom will turn green.
A carbon atom that is joined to four separate atom kinds or groups is known as an asymmetric carbon atom.
What is chiral carbon atom?A carbon atom that is joined to four separate atom kinds or groups is known as an asymmetric carbon atom. As a general rule, chiral carbon center's are carbon atoms positioned at the four corners of a tetrahedron and attached to four distinct substituents. Steatogenic carbons and asymmetrical carbon atoms are other names for chiral carbon atoms. Search for carbons that are bonded to four different substituents if you want to find chiral carbons. Any carbon atoms with double bonds or two hydrogen atoms connected can be promptly removed. We discover that there are three chiral carbons as a result of this.Tryptophan is the only amino acid that has two rings on it. At pH 7.4, it looks like this,
You can see the chiral carbon highlighted. You can tell that it's an [tex]$s p^3$[/tex]carbon and that it has four different substituents on it [tex]( $\mathrm{H}, \mathrm{NH}_3^{+}, \mathrm{COO}^{-}$, and $\mathrm{CH}_2-$ stuff).[/tex]
Therefore it's chiral.
To learn more about chiral carbon atom refer to:
https://brainly.com/question/9522537
#SPJ4
When a valid electron dot structure is written, how many double bonds will the molecule contain? A) 0 B) 1 C) 2 D) 4
Answer: I need to know what the molecule is probably A or C
Explanation:
Which of the following is an advantage that ectotherms have over endotherms of the same size?
a. They require much less food.
b. They are less vulnerable to predation events during cold weather.
c. They can remain active in cold weather or at nighttime-when temperatures cool.
d. They have higher metabolic rates and grow much more quickly.
a. They require much less food.
of the following is an advantage that ectotherms have over endotherms of the same size
Why do ectotherms use significantly less energy than endotherms do?Another crucial fact is that endotherms often have far greater metabolic rates than ectotherms. This is due to the fact that they must consume a lot of fuel (food) to keep their internal body temperature stable.
The same amount of food can support a bigger population of similarly sized ectotherms than endotherms because endotherms use more energy than ectotherms.
learn more about ectotherms
https://brainly.com/question/13871042
#SPJ4
What is the hydronium ion concentration of an acid rain sample that has a pH of 3.45?
A) 2.82 × 10-11 M
B) 3.55 × 10-4 M
C) 3.45 M
D) 10.55 M
The hydronium ion concentration of an acid rain sample that has a pH of 3.45 is 3.55 × 10-4 M.
Given the pH of hydronium ion = 3.45
The hydronium ion concentration can be calculated from the pH using the exact opposite mathematical procedure. The conjugate acid of H2O is H3O+. In aqueous solutions, a proton is denoted by the symbol H3O+. The proton would create a different structure in a non-aqueous solution. H2O(l) → H+(aq) + OH-(aq).
Because hydrogen ions bond to water molecules to generate hydronium ions, the equations pH = -log[H3O+] and pH = p[H3O+] can be used to compute a solution's pH.
pH + pOH = 14 then [H+] = 10^-pH
So the concentration of hydronium ion = 10^-3.45 = 3.55 × 10-4 M
To learn more about hydronium ion click here https://brainly.com/question/14619642
#SPJ4
Part A Provide the structure of the tripeptide val-gly-ser at pH 2 Draw the molecule on the canvas by cho sing buttons from the T The single bond is active by default.
The tripeptide val-gly-ser at pH 2 is composed of three amino acids: Valine, Glycine and Serine. The overall structure is shown below:
What is molecules?Molecules are the smallest unit of matter that can exist and still retain the properties of the material from which it came. Molecules are made of two or more atoms that are bonded together. Each molecule has its own distinct characteristics, depending on the types of atoms it contains and the way they are bonded. Molecules are the building blocks of all matter in the universe, from the air we breathe to the food we eat.
Valine:
H2N-CH(CH3)-CH2-COOH
Glycine:
H2N-CH2-COOH
Serine:
H2N-CH(OH)-CH2-COOH
The overall structure of the tripeptide val-gly-ser at pH 2 is shown below:
H2N-CH(CH3)-CH2-COOH ------ H2N-CH2-COOH ------ H2N-CH(OH)-CH2-COOH
To know more about molecules click-
https://brainly.com/question/26044300
#SPJ4
MULTIPLE CHOICE QUESTION
How many grams of Al203 were
decomposed?
287.13
200g
888g
1148.52g
287.13 grams of Al₂O₃ were decomposed. Therefore, option A is correct.
What is molar mass ?The term molar mass is defined as the mass in grams of one mole of the compound. A mole of any substance is 6.022 × 10²³ molecules. It is called as Avogadro's number. The molar mass is a bulk property, it is not molecular, property of a substance.
2Al₂O₃ ⇒ 4Al + 3O₂
Thus, 4 mol of Al combine with 3 mol of oxygen to form 2 mol of Al₂O₃.
2 mol of Al corresponds to 2 × 27 = 54g
Thus, the weight of Al used in the reaction is 108 g.
Molar mass of Al₂O₃ is 101.96g/mol.
5.63 moles of Al = 5.63 × 54 / 101.96
= 287.13 grams
Thus, 287.13 grams of Al₂0₃ were decomposed, option A is correct.
To learn more about the molar mass, follow the link;
https://brainly.com/question/12127540
#SPJ1
as a soap bubble (n=1.333) evaporates and thins, the reflected colors gradually disappear. What are (a) the bubble thickness just as the last vestige of color vanishes and (b) the last color seen?
The bubble thickness just as the last vestige of color vanishes and (b) the last color seen is 75.02nm
A pattern of interference is what?A pattern of conflict (plural interference patterns) The phase difference between two waves is depicted as a series of light and dark bands that vary in space. Thomas Young demonstrated how the interaction of two sources of light in the same medium results in an interference pattern.
In an interference pattern formed due to a thin film, the bright bands occur when constructive interference takes place. Constructive interference in a thin film is calculated as follows:
2nd = (m + 1/2)λ
d = (m + 1/2)λ/2n = (0+1/2)400nm/2(1.333)
d = 75.02nm
Here n is the refractive index of medium, 2 is the wavelength, m is the order, and d is the thickness of the film.
The wavelength of the light is considered 400 nm because the last color that appears is violet.
Therefore, the thickness of the film is 75.02 nm.
To know more about interference visit:
https://brainly.com/question/16098226
#SPJ4
would ethanol (ch3ch2oh) be a suitable solvent in which to perform the following proton transfer?
No, ethanol is not a better solvent for the following reaction. because ethanol is more acidic then alkyne. so NH2- abstracts proton from ethanol insted of alkyne. so expected reaction will not proceed if we use ethanol. CH3CH2OH + NH2- -----------> CH3CH2O- + NH3
Ethanol is a polar solvent, which means that it has a partial positive charge on one end and a partial negative charge on the other end. This polarity allows ethanol to dissolve polar compounds, such as acids and bases, which are commonly involved in proton transfer reactions. Ethanol also has a relatively low boiling point and is relatively less toxic than other solvents, making it a convenient choice for many laboratory procedures.
Learn more about polar solvents here:
https://brainly.com/question/3184550
#SPJ4
The complete question is:
would ethanol (ch3ch2oh) be a suitable solvent in which to perform the following proton transfer?
CH3CH2OH + NH2- -----------> CH3CH2O- + NH3
Predict the products when cyclohexanol is heated in the presence of H . Show all hydrogen atoms.
The product cyclohexanol with all hydrogen atoms is attached below.
cyclohexanol is alcohol?A single hydroxyl group is added to cyclohexane to create the alcohol cyclohexanol. the ancestor of the cyclohexanol class. It plays the part of a solvent. It belongs to the class of cyclohexanols and is a secondary alcohol.
Cyclohexanol is a very weak acidic compound that is soluble in water (based on its pKa). Garden tomato (variety), okra, and sweet basil contain the chemical cyclohexanol, which has the flavors of camphor, menthol, and phenol. This property makes cyclohexanol a potential biomarker for the consumption of these foods.
When cyclohexanol is heated with phosphoric acid in a catalytic amount, the result is cyclohexene because water is eliminated during dehydration. The phosphoric acid's function is to protonate the alcohol (described in "step a" below), making it a useful leaving group.
To know more about cyclohexanol visit:
https://brainly.com/question/14495488
#SPJ4
at what temperature are the liquid and solid phases of n-octane in equilibrium at 1 atm?
N-octane is a hydrocarbon with eight carbon atoms.
What is equilibrium?Equilibrium is a state of balance or stability between opposing forces or actions. It is a state in which there is no net change in a system and all forces are in balance. In economics, it is used to describe the situation in which supply and demand are equal, resulting in a stable market price and no tendency for it to change.
At 1 atm of pressure, the liquid and solid phases of n-octane are in equilibrium at a temperature of -164.8 °C (-258.6 °F). This is the melting point of n-octane, and is the temperature at which it transitions from solid to liquid. At temperatures below this, n-octane is in a solid state. At temperatures above this, n-octane is in a liquid state.
To know more about equilibrium click-
https://brainly.com/question/19340344
#SPJ4
A 250 -g sample of water at 80 C is mixed with 250 g of water at 10 c Find the entropy changes for (a) the hot water, (b) the cool water, and (c) the system.
A thermodynamic system's change in disorder or randomness is measured by a phenomena called entropy change.
What is a simple definition of entropy?The amount of thermal energy per unit of temperature in a system that cannot be used to carry out beneficial work is known as entropy. Since work is produced by ordered molecular motion, entropy also serves as a proxy for a system's molecular disorder or unpredictability.
Entropy Change is a phenomena that measures the evolution of randomness or disorder in a thermodynamic system. It has to do with the heat or enthalpy conversion that occurs during work. More randomness indicates a high entropy in a thermodynamic system.
The entropy grows from solid to liquid to gas, and by observing the phases of the reactants and products, you can determine if the change in entropy is positive or negative. Entropy will rise whenever there is a rise in gas moles.
To learn more about Entropy Change refer to:
https://brainly.com/question/6364271
#SPJ4
Draw a tetrahedral representation of (S)-3-methyl-1-hexyne.
A tetrahedral is an object that has a central atom surrounded by four other atoms.
What is tetrahedral representation?Bond angles of 109.5° are formed between each of the surrounding atoms and the centre atom. The tetrahedron, often known as a 3-simplex, is the three-dimensional manifestation of the more generic idea of a Euclidean simplex.
When four additional atoms are bound to the centre atom of a molecule, the geometry is known as tetrahedral. Tetrahedra have sp3 hybridised orbitals as their structure.
The centre atom in this scenario lacks a lone pair of electrons. The centre atom in this scenario lacks a lone pair of electrons. Complete response: Tetrahedral molecules are ones in which the centre atom is bound to four other atoms and lacks any lone pair of electrons.
To learn more about tetrahedral representation refer to:
https://brainly.com/question/11383496
#SPJ4
A mixture is made by combining 1.50 lb
of salt and 4.45 lb
of water. What is the percentage of salt (by mass) in this mixture?
The mass percent of a component in a mixture is the ratio of its mass to the total mass multiplied by 100. The mass percent of salt in the mixture is 25.2 %.
What is percentage composition ?The percentage composition of a component in a compound or mixture is the fraction of that component in the total amount of the mixture. Mass percent is a common term used to express the concentration of a solution as well.
The mass percent of a component in a mixture is the ratio of its mass to the total mass of the mixture multiplied by 100.
Given the mass of salt = 1.50 lb
mass of water = 4.45 lb
total mass = 1.50 + 4.45 = 5.95 lb
Mass percent of salt = mass of salt/total mass
= 1.50 / 5.95 × 100 = 25%.
Therefore, the mass percent of the salt in the mixture is 25%.
Find more on mass percent:
https://brainly.com/question/5394922
#SPJ1
write a bulleted list of the positive impacts of genetically modified foods on society and the environment.
Answer:
See below
Explanation:
Healthier due to added nutrientsCheaper to produce and as a result cheaper pricesResistance to insects other viruses/diseases and greater tolerance to herbicidesCan grow in harsher climates and poor soilLonger shelf lifeprepare a table and write the formula and important uses of:
A.sodium chloride
B.calcium carbonate
C.sodium bicarbonate
D.potassium nitrate
E.diammonium phosphate (DAP)
The prepared table and the formula and important uses of compounds listed is given in the table attached:
What are the compounds about?Sodium Chloride (NaCl), also known as table salt, is a chemical compound made up of one sodium (Na) ion and one chlorine (Cl) ion. It is a common seasoning and preservative in food and is also used in water treatment to remove impurities.
Calcium Carbonate (CaCO3) is a chemical compound made up of one calcium (Ca) ion, one carbon (C) ion and three oxygen (O) ions.
Sodium Bicarbonate (NaHCO3), also known as baking soda, is a chemical compound made up of one sodium (Na) ion, one hydrogen (H) ion, one carbon (C) ion and three oxygen (O) ions.
Potassium Nitrate (KNO3) is a chemical compound made up of one potassium (K) ion, one nitrogen (N) ion and three oxygen (O) ions.
Therefore, Diammonium Phosphate (DAP) is a chemical compound made up of two ammonium (NH4+) ions and one phosphate (PO4) ion.
Learn more about sodium chloride from
https://brainly.com/question/24878544
#SPJ1
Predict the product, if any, of reaction between methyl propanoate and LiAlH4, then H3O+.
Draw only the product derived from the acyl portion of methyl propanoate.
You do not have to consider stereochemistry.
If no reaction occurs, draw the starting material.
1) Propanyl chloride is an acid chloride. This propanyl chloride on reaction with LiAlH4 and H3O+ yield corresponding alcohol. 2. Methyl propanoate on reaction with aniline yield corresponding amide. 3. Amide on hydrolysis yield carboxylic acid.
When methyl propanoate reacts with lithium aluminum hydride (LiAlH4), the carbonyl group of the ester is reduced by the hydride ion (H-) from LiAlH4 to form an alcohol. The final product of this reaction would be the alcohol derived from the acyl portion of methyl propanoate. When this alcohol is then treated with hydrochloric acid (HCl) or another acid, it will undergo a protonation, forming the corresponding alkyl carbinol. The final product of this reaction is the carbinol and the carboxylic acid derived from the acyl portion of methyl propanoate.The product of the reaction between methyl propanoate and LiAlH4 then H3O+ would be the following structure:
H3C-C(=O)-O-CH2-CH3
| |
H H2O
The product of the reaction is the Carboxylic acid derived from the acyl portion of methyl propanoate.
Learn more about hydrolysis here:
https://brainly.com/question/1403345
#SPJ4
Properties of matter affect how people need to handle the different states of matter, such as the propane gas that is being carried inside this tanker truck. Look at the tank of the truck that contains the gas. Why is this tank design useful for transporting gas? Considering the volume and shape properties of each state of matter, how might the container on a truck carrying a liquid or a solid be designed differently?
Answer:
Explanation:
The tank design of the truck is useful for transporting gas because it is able to hold large volumes of gas while taking up minimal space. The container is typically long and cylindrical in shape, allowing the gas to be compressed and stored in a smaller space.
If the truck were carrying a liquid, the container would likely be designed differently. Liquids take the shape of their container, so the container would need to be able to hold the liquid in an upright position without spilling. This could be achieved through the use of a tank with a closed top and a small opening at the bottom for dispensing the liquid.
For a solid, the container would also need to be designed differently. Solids have a fixed shape and volume, so the container would need to be able to hold the solid without crushing or altering its shape. This could be achieved through the use of a container with walls that are thick and sturdy enough to support the weight of the solid.
Acids and alkalis have …………………….chemical properties or reactions.
Acids and alkalis have different chemical properties or reactions and even physical properties.
What are chemical properties?
These properties are defined as those properties which become evident during or after a chemical reaction after the identity of the substance is changed during chemical reaction.
These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and for building up chemical classifications.
Learn more about chemical properties,here:
https://brainly.com/question/1935242
#SPJ1
Passage 1
Passage 2
Dorothy Parker (1893-1967) was an American short-story
writer, poet, and critic best known for her satiric wit
This excerpt is from her essay titled Henry' in her book
Men Im Not Married To.
from "Henry"
by Dorothy Parker
You would really be surprised at the number of
things that Henry knows just a shade more
about than anybody else does. Naturally he
can't help realizing this about himself, but you
mustn't think for a minute that he has let it
spoil him. On the contrary... [w]hen it comes
to giving his time and his energy there is
nobody who could not admit that Henry is
Passage 1
Passage 2
Passage 1 Passage 2
Drag ONE sentence to EACH box to compare and
contr themes in Passage 1 and Passage 2.
Both
generous. To a fault, I have even heard people
go so far as to say.
... And that is the way Henry is about
everything. He will stroll over to a tennis court,
and stand on the side lines, at what I am sure
must be great personal inconvenience, calling
words of advice and suggestion for sets at a
stretch. I have even known him to follow his
friends all the way around a golf course,
offering constructive criticism on their form as
he goes. I tell you, in this day and generation,
you don't find many people who will go as far
out of their way for their friends as Henry does.
And I am far from being the only one who says
so, too.
strong friendships are based on emotion rather than
intellect.
Friends who remain detached from others may risk
friendships that expose their faults.
Friends who flaunt their perceived superiority may
risk losing friendships.
Most friendships are complicated because people are
imperfect.
What is the quotient 10 ÷ (-5)?
Answer:
-2
Explanation:
10 ÷ (-5) = -2
draw a diagram to show the equipment you might use to prevent energy being lost during the heating of the ice/water
The equipment you might use to prevent energy being lost during the heating of the ice/water is : calorimeter.
What is a calorimeter?A calorimeter is an object used for the process of measuring the heat of chemical reactions or physical changes and also heat capacity. Differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters and accelerated rate calorimeters are the most common types.
Device used to measure the amount of heat involved in a chemical or physical process is called calorimeter. For example, when exothermic reaction occurs in a solution in calorimeter, heat produced by the reaction is absorbed by solution, that results in increase in temperature.
To know more about calorimeter, refer
https://brainly.com/question/2963957
#SPJ1
classify the following aldehydes and ketones as soluble in water or not very soluble in water.
Drag the appropriate items to their respective bins.
Soluble Not very soluble
For the following aldehydes and ketones .1 , 4 , 5 are soluble and remaining are not very soluble . ether= CH3CH2OCH2CH3,diethyl ether. Ester= CH3COOCH3, ethyl hexanoate, methyl benzoate, remaining are neither ether nor ester
Aldehydes and ketones are two types of organic compounds that belong to a class of compounds known as carbonyl compounds. The defining feature of these compounds is the presence of a carbonyl group (C=O), which is a carbon atom double-bonded to an oxygen The general structural formula for an aldehyde is R-C(=O)-H, where R can be any organic group. Ketones, on the other hand, have the carbonyl group in the middle of the carbon chain and are characterized by the general structural formula R-C(=O)-R', where R and R' can be any organic group
know more about aldehydes here:
https://brainly.com/question/29756072
#SPJ4
the complete question is:
classify the following aldehydes and ketones as soluble in water or not very soluble in water.
Drag the appropriate items to their respective bins.
Soluble Not very soluble
draw all resonance structures for the nitric acid molecule, hno3 (no2oh).
Three oxygen atoms, one nitrogen atom, and one each of hydrogen and oxygen make up each nitric acid molecule.
How many resonance structures does HNO2 have?Three oxygen atoms, one nitrogen atom, and one each of hydrogen and oxygen make up each molecule of nitric acid. One of the oxygen atoms and the central nitrogen atom in HNO3 molecules are doubly bound. With the core nitrogen atom and a hydrogen atom, two additional oxygen atoms are singly linked.
The solution, however, demands the assumption that HNO2 only has one single bond (NO) and one double bond (N=O), and that these two bonds are not equivalent.
In HNO3, also known as nitric acid, H+ and NO3 ions are present in an aqueous solution of NO2 (nitrogen dioxide). Also triangular and flat in shape is the NO3 ion. So, nitric acid has a triangular planar form.
To learn more about nitric acid molecule refer to:
https://brainly.com/question/22698468
#SPJ4