Answer: lysocline
Explanation:
Lysocline is the depth in the ocean at which calcareous skeletal material first begins to dissolve. It is the depth of the ocean whereby the dissolution rate of calcite has a dramatic rise.
Lysocline is also referred to as the transition zone upper bound where the CaCO3 content drops.
As electrons are passed down the electron transport chain, the molecules are first ______ as they pick up electrons, and then ______ as they release the electrons.
Answer:
reduced; oxidized
Explanation:
An electron transport chain can be defined as a series of redox reactions (electron transporters or proton complexes) that are saddled with the responsibility of transferring electrons from electron donors to electron acceptors through a membrane in order to produce a protein gradient that creates energy or adenosine triphosphate (ATP).
Generally, as these electrons are transferred through the electron transport chain, the molecules are first reduced as they pick up electrons, and then oxidized as they release the electrons.
Cellular respiration can be defined as a series of metabolic reactions that typically occur in cells so as to produce energy in the form of adenosine triphosphate (ATP). During cellular respiration, high energy intermediates are created that can then be oxidized to make adenosine triphosphate (ATP). Therefore, the intermediary products are produced at the glycolysis and citric acid cycle stage.
Additionally, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.
How did Rutherford's gold foil experiment show that Thomson's plum pudding model of the atom was
incorrect?
Answer:
He blasted alpha rays at the gold foils. The Alpha rays are charged positive. When he blasted them the protons deflected and changed the course of them and the electrons surrounding the atom let them through. In the plum pudding model they were supposed to be sprinkled on which was clearly wrong according to that experiment.
Explanation:
Which would most likely be reduced when combined with Cu(s)?
A. Hg
B. Mg2+
C. Au+
D. Zn2+
Answer:
mg2+ because it is a very good idea
How is the relation between the volume and temperature? Explain.
1:Which one of the following solutions shows no current flow in an electrolytic cell?
A: water solution of table salt
B: molten sodium chloride
C: hydrochloric acid solution
D: sugar solution
Answer: Sugar solution shows no current flow in an electrolytic cell.
Explanation:
Electric current is the flow of ions or charged species from one point to another.
A solution that does not contain any ions is not able to conduct electric current.
Water solution of table salt (NaCl) contains sodium and chlorine ions. So, an electric current can pass through it.Molten sodium chloride also contains sodium and chlorine ions. Hence, an electric current can pass through it.Hydrochloric acid solution contains [tex]H^{+}[/tex] and [tex]Cl^{-}[/tex] ions. So, an electric current can pass through it.Sugar solution does not contain ions as sugar only dissolves in water but do not dissociate into ions. Hence, current cannot flow through sugar solution.Thus,, we can conclude that sugar solution shows no current flow in an electrolytic cell.
A student makes several observations about a piece of iron. Which observation describes a chemical property of the iron?
Answer:
An example of a chemical property of iron would be that it is capable of combining with oxygen to form iron oxide, or rust.
Explanation:
You have no choice listed, so I provided an example.
There are two types of automatic exposure control: photodiode and the more common parallel plate ionization chamber. How are they positioned
Answer:
Following are the response to the given question:
Explanation:
In the given question the automatic exposure is used as the management which is offered in two distinct methods: photodiode as well as the parallel ionizing tank. In both are positioned as the absolute pressure type is between the patient as well as the receptor, behind the image receptor the photoelectric is placed.
List twelve types of industry
Answer:
-Aerospace Industry.
-Transport Industry.
-Computer Industry.
-Telecommunication industry.
-Agriculture industry.
-Construction Industry.
-Education Industry.
-Pharmaceutical Industry.
-Food Industry
-Health Care Industry
-Hospitality Industry
-Entertainment Industry
Help asappppp quickly only right answers aloud
Answer:
Inference
Explanation:
A conclusion reached on the basis of evidence and reasoning is called an inference.
According to kinetic-molecular theory, which of the following would not be considered an ideal gas? Check all that apply.
a gas at very high temperatures, when gas particles are moving very quickly
a gas at very low volumes, when gas particles are very close together
a gas at very low temperatures, when gas particles have very little kinetic energy
a gas at very low pressures, when gas particles are very far apart
a gas with highly polar molecules that have very strong intermolecular forces
Answer:
a gas at very low temperatures, when gas particles have very little kinetic energy
Explanation:
Answer:
B, C, and E!
Explanation:
got it correct on edge! :)
2. Which ions will form an ionic bond?
A. two negative ions
B. a positive and a neutral atom
C. two positive ions
D. a positive ion and a negative ion
Answer:
D. a positive ion and a negative ion
Explanation:
Ionic bonds is formed from the attraction of opposite full charges. So a positive ion and a negative ion will make a ionic bond (Similar to how Na+ and Cl- ions make salt - which is basically a crystal of ions bonded via ionic bonds)
Can someone please do a True or false for these PLEASE
Answer:
true
false
false
true
false
true
true
false
false
true
true
Write the test for the following Gases.
Co2, H2,Cl2, Br2,
SO2,
NO2,
Answer:
oh no!! I can't do this ;(
Explanation:
oopsie "BrO" I can't do this pleaseee.
don't be selfish next time and maybe people will help you...
Balance the equation of. _C + _O2 -- _CO
Explanation:
2C +O2 = 2CO
this will be the answer
Which statement is not true about the periodic table?
A. Elements in the same family have the same number of protons.
B. An element of the table is represented by a box with a symbol in it.
C. Elements in the same period of the periodic table have the same
number of electron shells.
D. It is organized by atomic number.
Elements in the same family have the same number of protons. This statement is not true about the periodic table. Therefore, option A is correct.
What is periodic table ?The chemical elements are arranged in rows and columns in the periodic table, sometimes referred to as the periodic table of the elements. It is frequently used in physics, chemistry, and other sciences and is frequently regarded as a symbol of chemistry.
The table can be used by scientists to anticipate chemical reactions, study trends in the periodic properties of certain elements, and speculate on the properties of yet-to-be-discovered elements. The elements are arranged in the contemporary periodic table according to their atomic numbers and periodic characteristics.
The periodic table has changed to represent more than 150 years of chemical and physics research and development.
Thus, option A is correct.
To learn more about the periodic table, follow the link;
https://brainly.com/question/11155928
#SPJ2
how many moles are in 6.4grams of copper
Answer:
One mole of copper atoms has Avogadro number of copper atoms i.e. 6.022×10
23
atoms.
Given the mass of Copper is 6.4g
Number of Copper atoms in 6.4g =
molar mass
given mass
×Avogadro number
=
63.55
6.4
×6.022×10
23
copper atoms
=6.064×10
22
copper atoms
Explanation:
Nung hoàn toàn 173,8g Kali pemanganat để điều chế khí oxi. a/ Tính thể tích khí oxi thu được (đktc). b/ Đốt 12,4g photpho trong lọ chứa khí oxi trên. Sau khi phản ứng kết thúc đưa que đóm còn tàn đỏ vào ống nghiệm thì que đóm có bùng cháy không? Vì sao
Answer:
45
Explanation:
because the number is right
solve this question please! it have 3 options which one of them is correct option
Answer:
I think option two (2) is the correct answer
.
Unlike a theory, a scientific law describes an observed pattern without attempting to _____ it.
explain
prove
test
verify
classify each of the following solids as ionic,metallic, molecular, network (covalent)or amorphous?
1) Tetra phosphorous deicide(P4O10)
2)Graphite
3) Ammonium phosphate (NH4)3po4
4) Brass
5)SiC
6)Rb
7)l2
8)LiBr
9)P4
10) Plastic
11)Si
Answer;
P4O10 - molecular solid
Graphite - network solid
Ammonium phosphate - ionic
Brass - metallic
SiC - network solid
Rb- metallic
I2 - molecular
LiBr- ionic
P4 - molecular
Plastic - amorphous
Si - network
Explanation:
An ioinc solid is made up of a pair of oppositely charged ion held together by electrostatic interaction between the bonding species.
A covalent solid is a solid in which the atoms involved in the solid are bonded together by covalent bonds. Covalent solids are also molecular.
Metals are held together by interaction of metal ions and a sea of electrons. This is called the metallic bond.
A network solid is composed of covalently bonded atoms that repeat itself in a definite manner. E.g SiC
Which refers to substances that are complex molecules and contain carbon atoms bonded to hydrogen atoms?
o
O organic
O inorganic
ionic
metallic
Answer:
organic
Explanation:
Organic substances are those which contains covalently linked carbon to hydrogen (C-H) bonds in their structure. In other words, organic compounds or substances are uniquely composed of carbon and hydrogen atoms covalently linked together.
These substances usually contain a long chain of these bonds, hence, making them complex. Therefore, according to this question, substanves that are complex molecules and contain carbon atoms bonded to hydrogen atoms are referred to as ORGANIC SUBSTANCES.
Answer:
A. Organic
Explanation:
What is the most important criteria for using chromatography to separate components from a mixture
Answer:
this is your answer i hope it will help you if this answer is right then folow meChromatography can be quantitatively found by the retention factor. Therefore, the important criterion to use chromatography for separating components of a mixture is the difference in solubility of the liquids.
How to find the percentage abundance of isotope
Answer:
Answer below (in explanation)
Explanation:
First find the average atomic mass of the element in question (on the periodic table)
Set up the relative abundance formula: (M1)(x) + (M2)(1-x) = M(E)
Where M1 = Mass of the first isotope, X = Relative abundance, M2 = mass of the second isotope, M(E) = Atomic mass of the element
Plug in your values (i'll use nitrogen as an example) :
(background info: The mass of one isotope, nitrogen-14, is 14.003 amu and another isotope, nitrogen-15, is 15.000 amu, find the relative abundance of the isotopes.
14.003x + 15.000(1-x) =14.007
Use algebra and solve for X. First use distributive property, combine like terms, and solve for X.
It would equal X = 0.996. Multiply by 100 to get a proper percentage and the percentage abundance of Nitrogen-14 is 99.6%
This way of solving is limited to 2 isotopes only.
Done
How many ATP molucules may by synthesed in the case of full methabolism in MUSCULE of oligosaccharide which molucular weight is 48942?
Answer:
About 96 to 256 ATP molecules are produced.
Explanation:
About 96 to 256 ATP molecules may be synthesized in the full metabolism in oligosaccharide because one oligosaccharide molecule has 3 to 8 glucose atoms. About 30 to 32 ATP are produced from one glucose molecule so from three glucose molecule, 96 ATP produced whereas 256 ATP molecules are produced from 8 glucose molecules so we can say that About 96 to 256 ATP molecules from one oligosaccharide.
Arrange Cu, Ca, Na, Zn and Au on the basis of their decreasing reactivity.
Answer:
1. Sodium (Na) is the most reactive due to its lower number of shells which enables the protons in it's nucleus to attract more electrons.
2. Calcium (Ca) is next as it is a group 2 element and they can be quite reactive.
3. Zinc (Zn) is the third reactive as transition metals are not very reactive.
4. Copper (Cu) is less reactive than Zinc because it is closer to the center of the periodic table and therefore has more stability.
5. Gold (Au) is the least reactive.
¿Cuáles son las características del átomo de carbono?
Someone plz help me here are the photos, I need the last one
Answer:
(6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol) - (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)
Explanation:
Question; From the given options, the chemical reaction in the question is presented as follows;
C₆H₁₂O₆(s) + 6O₂(g) → 6CO₂(g) + 6H₂O(l), given that we have;
[tex]\Delta \text H _f^{\circ}[/tex] for C₆H₁₂O₆ = -1,273.02 kJ/mol
[tex]\Delta \text H _f^{\circ}[/tex] for O₂(g) = 0 kJ/mol
[tex]\Delta \text H _f^{\circ}[/tex] for CO₂(g) = -393.5 kJ/mol
[tex]\Delta \text H _f^{\circ}[/tex] for H₂O(l) = -285.83 kJ/mol
The heat or enthalpy of a reaction, is given as follows;
[tex]\Delta\text H_{rxn}^{\circ} = \sum \text n \cdot \Delta \text H _f^{\circ}(\text {products}) - \sum \text m \cdot \Delta \text H _f^{\circ}(\text {reactants} \text)[/tex]
Therefore, the equation which should be used to calculate [tex]\Delta\text H_{rxn}^{\circ}[/tex], is given as follows;
[tex]\sum \text n \cdot \Delta \text H _f^{\circ}(\text {products})[/tex] = (6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol)
[tex]\sum \text m \cdot \Delta \text H _f^{\circ}(\text {reactants} \text)[/tex] = (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)
Therefore;
[tex]\Delta\text H_{rxn}^{\circ}[/tex] = (6 mol)·(-393.5 kJ/mol) + (6 mol)·(-285.83 kJ/mol) - (1 mol)·(-1,273.02 kJ/mol) + (6 mol)·(0 kJ/mol)
If I have 9.7 moles of gas at a pressure of 0.12 atm and at a temperature of 46°C, what is the volume of the
container that the gas is in?
Answer:
2117.02 litres
Explanation:
Using the ideal gas equation as follows;
PV = nRT
Where:
P = pressure of the gas (atm)
V = volume of the gas (L)
n = number of moles (mol)
R = gas law constant (Latm/molK)
T = temperature (K)
According to the information given in this question,
P = 0.12 atm
V = ?
n = 9.7moles
T = 46°C = 46 + 273 = 319K
R = 0.0821 Latm/molK
Using PV = nRT
0.12 × V = 9.7 × 0.0821 × 319
0.12V = 254.04
V = 254.04 ÷ 0.12
V = 2117.02 litres
Help me with this question
Prove that:-
1.The unit of pressure is a derived unit?
2.The unit of work is a derived?
Answer:01
When you describe nature, and you need standard, useful units for everything you will see that these units are linked. So you start with defining base units that are simple:
kg, meter, second, Kelvin, …
Now other units will be automatically derived:
speed = distancetime , so the unit is ms
acceleration = speedincreasetime , so the unit is ms2
Force = Mass x acceleration, so the unit is kg.ms2
Pressure is Force/surface, so the unit is kgm.s2
You can define new simple units for this, but they are still derived from the base units:
Force: 1N=1kg.ms2
Pressure: 1Pa=1kgm.s2
2 Answer
In mechanics, work is defined as “force x distance”. Since energy can be measured as work, we can write energy = force x distance. Thus SI derived unit of energy has the units of newtons x meter or kg m2/s
What element has 9 electrons, and 11 neutrons?
fluorineelement has 9 electrons, and 11 neutrons