he concept of energy can be calculated in multiple ways. Which units are used for energy? Check all that apply.

joules
kilogram meters2/seconds2
newtons
kilojoules
meters/seconds2

Answer:

The answer is "Including all three studies of 0s to 2s, that shift in momentum is equal".

Explanation:

Its shift in momentum doesn't really depend on the magnitude of its cars since the forces or time are similar throughout all vehicles.

Let's look at the speed of the car

[tex]F = m a\\\\a =\frac{F}{m}[/tex]

We use movies and find lips

[tex]\to v = v_0 + a t\\\\\to v = v_0 + (\frac{F}{m}) t[/tex]

The moment is defined by

[tex]\to p = m v[/tex]

The moment change

[tex]\Delta p = m v - m v_0[/tex]

Let's replace the speeds in this equation

[tex]\Delta p = m (v_0 + \frac{F}{m t}) - m v_0\\\\\Delta p = m v_0 + F t - m v_0\\\\\Delta p = F t[/tex]

They see that shift is not directly proportional to the mass of cars since the force and time were the same across all cars.

Answer:

1. Mechanical energy = 298.4 Joules.

2. Mechanical energy = 2140 Joules.

3. Mechanical energy = 0.2838 Joules.

Explanation:

Kinetic energy can be defined as an energy possessed by an object or body due to its motion.

Mathematically, kinetic energy is given by the formula;

[tex] K.E = \frac{1}{2}MV^{2}[/tex]

Where;

K.E represents kinetic energy measured in Joules.

M represents mass measured in kilograms.

V represents velocity measured in metres per seconds square.

Potential energy can be defined as an energy possessed by an object or body due to its position.

Mathematically, potential energy is given by the formula;

[tex] P.E = mgh[/tex]

Where,

P.E represents potential energy measured in Joules.

m represents the mass of an object.

g represents acceleration due to gravity measured in meters per seconds square.

h represents the height measured in meters.

Given the following data;

1. Kinetic energy = 182.2 J

Potential energy = 116.2 J

To find the mechanical energy;

Mechanical energy = kinetic energy + potential energy

Mechanical energy = 182.2 + 116.2

Mechanical energy = 298.4 Joules.

2. Mass = 40kg

Velocity = 3m/s

Height = 5m

We know that acceleration due to gravity is equal to 9.8m/s²

To find the mechanical energy;

We would determine the kinetic and potential energy respectively.

K.E = ½mv²

K.E = ½*40*3²

K.E = 20*9

K.E = 180 Joules.

P.E = mgh

P.E = 40*9.8*5

P.E = = 1960 Joules

Mechanical energy = K.E + P.E

Mechanical energy = 180 + 1960

Mechanical energy = 2140 Joules.

3. Mass = 0.002kg

Height = 3m

Velocity = 15m/s

To find the mechanical energy;

K.E = ½mv²

K.E = ½*0.002*15²

K.E = 0.001*225

K.E = 0.225 Joules.

P.E = mgh

P.E = 0.002*9.8*3

P.E = = 0.0588 Joules

Mechanical energy = K.E + P.E

Mechanical energy = 0.225 + 0.0588

Mechanical energy = 0.2838 Joules.

D

Explanation

Given,

Distance covered in 1 lap = 400m

= Distance covered in 2 laps = 400 × 2

=800m

If Jermaine runs 2 whole laps, she comes back to her starting point.

So the answer is 0m

Answer:

Force = 504.6 N

Explanation:

Weight, W = mg

Weight of object = 87 N

Effort length = 9.2 m

Resistance length = 3.4 m

The required length, h = Effort length - Resistance length

                                      = 9.2 - 3.4

                                      = 5.8 m

But,

F = mgh

  = W x h

F = 87 x 5.8

  = 504.6 N

The value of force required to lift the weight is 504.6 N.

Answer:

A. The angle with which the light passes from glass into water is approximately 31.97°

B. The image formed is, real, inverted, and smaller than the object

C. The image distance is 53.2[tex]\overline 6[/tex] cm

The image is real

D. The magnification is approximately 0.182

E. The type of lens required is a concave lens which corrects the focus of a powerful eye lens or a long eyeball

Explanation:

The given parameters for the light wave are;

The refractive index of the glass medium, n₁ = 1.5

The angle of incidence of the light, θ₁ = 28°

The refractive index of water, n₂ = 1.33

A. Let θ₂ represent the angle with which the light passes from glass into water

Snell's law is mathematically stated as follows;

n₁·sin(θ₁) = n₂·sin(θ₂)

According to Snell's law, we have;

1.5 × sin(28°) = 1.33 × sin(θ₂)

sin(θ) = (1.5 × sin(28°))/1.33 = 0.52947920615

∴ θ₂ = arcsin(0.52947920615) ≈ 31.97°

The angle with which the light passes from glass into water, θ₂ ≈ 31.97°

B. Please find attached the drawing of the image created with Microsoft Visio

From the drawing, we have that the image formed is real inverted smaller than the object and between the focus and radius of curvature

C. The location of the object from the mirror, u = 94.0 cm

The focal length of the mirror, f = +34.0 cm

The mirror formula for a concave mirror is given as follows;

[tex]\dfrac{1}{f} = \dfrac{1}{u} + \dfrac{1}{v}[/tex]

Therefore, we have;

[tex]\dfrac{1}{34.0} = \dfrac{1}{94.0} + \dfrac{1}{v}[/tex]

[tex]\dfrac{1}{v} = \dfrac{1}{34.0} - \dfrac{1}{94.0} = \dfrac{15}{799}[/tex]

[tex]\therefore \dfrac{v}{1} = v =\dfrac{799}{15} = 56.2\overline 6[/tex]

The image distance, v = 799/15 = 53.2[tex]\overline 6[/tex] cm

Therefore the image is in front of the mirror, which is a real image

The image is real

D. The given parameters of the object and lens are;

The distance of the object from the lens, u = 65.0 cm

The distance of the image formed from the lens, i = -18 cm

The magnification, M, is given as follows;

[tex]M = \dfrac{-v}{u}[/tex]

Therefore;

[tex]M = \dfrac{-(-11.8)}{65.0} = \dfrac{59}{325} \approx 0.18153846153[/tex]

The magnification, M ≈ 0.182

E. For a person who is near sighted, the light from objects from distant location are almost parallel and are brought to a focus in front of the retina and therefore, they appear blurred

The use of a concave lens is required to correct nearsightedness as it causes the light to appear come from a point before the focus such that the divergent rays of the object refracted through the concave lens comes to a focus at the.

Answer:

B.) a stretched rubber band

Explanation:

-

Answer:

As the phase changes occur, the freedom of motion of the particles increases

Explanation:

In thermodynamics the state of matter: solid, liquid and gaseous.

We can characterize them, the solid state maintains a certain shape, which is why particles are tightly bound and can hardly move from their equilibrium positions.

The liquid state does not hold its shape, so the particles have more energy and can move a lot from their equilibrium position.

The gaseous state does not maintain the shape or the volume, so the interaction between the particles is very small, so they can move almost freely.

When examining the answer, the correct one is: As the phase changes occur, the freedom of motion of the particles increases.

Answer: One of the factors of the rate of heat transfer is the amount of surface area contact of the thermometer and the object whose temperature is being measured. By using a cylindrical bulb, rather than a spherical bulb, the time to get an accurate temperature is reduced. hope this helps. Can u give me brainliest

Explanation:

Answer:

it is because by using a cylindrical bulb,rather than a spherical bulb,the time to get to an accurate temperature is reduced. If you place the bulb of a mercury thermometer made of glass in boiling water you can see that the column of the mecury falls before rising

Answer:

d. changing refractive index of gases in the atmosphere

Explanation:

light from a star passes through the atmosphere to reach our eyes. however, the layers of gases in the atmosphere are in constant motion, so the light gets bent and appears to be flickering.

i hope this helps! :D

Answer:

A bomb that is dropped from a moving helicopter doesn't fall directly downward rather it follows the parabolic path as it were thrown horizontally from a height with certain initial velocity. Therefore, the bomb should be dropped from farther distance equal to the horizontal range before the helicopter reaches above the target.

Answer: force is 0.42 N

Explanation: F = l·v·B

Answer:

[tex]mv \div r \\ mass \times velocity \div radius[/tex]

Answer:

The answer would be 450 m kg/s

Explanation/ Explanation / Example:

Provided an object traveled 500 meters in 3 minutes , to calculate the average velocity you should take the following steps: Change minutes into seconds (so that the final result would be in meters per second). 3 minutes = 3 * 60 = 180 seconds , Divide the distance by time: velocity = 500 / 180 = 2.77 m/s .

If this doesn't help let me know!

Answer:

I believe the correct answer is B.." 1 "

Explanation:

hope it helps! ;)

Answer:

water at high temperature

Explanation:

When heated, molecules move faster which results in the sound waves being transmitted faster.

Answer:

d

Explanation:

I can't tell right away.  The elevator's limit is given in terms of mass, but the four people are listed in terms of their weights.  In order to compare them, we'll have to convert one or the other.

The total of the four people's weights is:

John . . . . . . . 850N

Betty . . . . . . . 530N

Robert . . . . . . 740N

Alice . . . . . . . .610N

Total . . . . . . 2,730N

The elevator can't accept more than 300 kg of mass.

The weight of any mass is (mass) x (gravity).

On Earth, 300kg weighs (300kg) x (9.8 m/s²) = 2,940 N.

Wonderful !  

2,730N is less than 2,940N.

Yes ! According to Otis' engineers, John, Betty, Robert and Alice can safely ride the elevator together, (although Betty and Alice may have a different opinion).

The statement is false.

Answer:

4.02 s

Explanation:

From the question given above, the following data were obtained:

Angle of projection (θ) = 35°

Initial velocity (u) = 50 m/s

Acceleration due to gravity (g) = 10 m/s²

Time of flight (T) =?

The time of flight of the arrow can be obtained as follow:

T = 2uSineθ / g

T = 2 × 35 × Sine 35 / 10

T = 70 × 0.5736 / 10

T = 7 × 0.5736

T = 4.02 s

Therefore, the time taken for the arrow to return is 4.02 s

Choose the 2nd Option.....

Answer:

normal force, the pluck will move off in a different direction

Explanation:

Answer:

Normal force, the puck will move off in a different direction

Explanation:

Answer:

very low air pressure and that's not 100 points

Answer:

8173.8 km

Explanation:

Fg=G(M*m/r^2)

r=sqrt(G*M*m/Fg)

G=6.6743*10^-11

M(earth)=5.972*10^24kg

M(object)=352kg

Fg=-2100N

r=sqrt((6.6743*10^-11)*(5.972*10^24kg)*(352)/-2100)

r=8173808m

r=8173.8km

According to Newton's calculations, gravity reduces to a fourth of what it was at the surface of the Earth if the distance from the planet's centre is doubled. At the Earth's surface, a satellite with a mass of 1,000 kg exerts a weight force of 9,800 N.

Satellites are pulled toward Earth by its gravity, even when they are hundreds of kilometres distant. The satellite doesn't fall back to Earth; instead, it travels into orbit above it due to gravity and the velocity it acquired during launch into space.

A satellite that is in a steady circular orbit around the Earth is always falling. It encounters a gravitational pull toward the centre of Earth as it orbits, which forces it to shift course and “fall” towards Earth.

Therefore, Since gravity is the only force acting on a satellite in circular orbit, the centripetal force and gravity must be equal: Fc = Fg.

Learn more about satellite here:

https://brainly.com/question/9266911

#SPJ2

Answer:

I don't know if these are all right but these are my best answers. good luck and I hope you do well.

1. true

2. true

3. false

4. true

5. true

6. true

7. true

8. true

9. false

10. false

13. it stimulates the heart through chest compressions

14. on bare skin upper right shoulder and lower left ribs

15. no CPR

Explanation:

Answer:

the thermal energy absorbed is 46,893 J

Explanation:

Given;

mass of the water, m = 145 g = 0.145 kg

initial temperature of the water,  t₁ = 23 ⁰C

final temperature of the water, t₂ = 100 ⁰C

specific heat capacity of water, c = 4,200 J/kg.⁰C

The thermal energy absorbed is calculated as;

H = mcΔt

H = 0.145 x 4,200 x (100 - 23)

H = 46,893J

Therefore, the thermal energy absorbed is 46,893J

Answer:

0.5m or 50 cm

Explanation:

Answer:

C is the answer to your question

Answer:

D.

Kinetic energy is maximum and potential energy is minimum.

Explanation:

Explanation:

By using v=( f )x( lambda )

v= 45 s^-1 x 3 m

Therefore v = 135 ms^-1