H2 gas and N2 gas were placed in a rigid vessel and allowed to reach equilibrium in the presence of a catalyst according to the following equation. 3 H2(g) + N.(g) + 2 NH,(g) The diagram below shows how the concentrations of H, N. and NH, in this system changed over time N Concentration NA Time N Concentration NH 0 10.5 Time Tim 17 12 3. H2 gas and N2 gas were placed in a rigid vessel and allowed to reach equilibrium in the presence of a catalyst according to the following equation. 3 H2(g) +N (g) = 2 NH,(g) The diagram below shows how the concentrations of H2 , N, , and NH, in this system changed over time
Answers
In the given system, the concentrations of H2, N2, and NH3 would change over time as the system approaches equilibrium, with the rates of the forward and reverse reactions becoming equal at equilibrium. The specific concentrations of H2,
In a chemical reaction, reactants are transformed into products, and the reaction can proceed in both the forward and reverse directions. At some point, the rates of the forward and reverse reactions become equal, and the system reaches a state of dynamic equilibrium.
At equilibrium, the concentrations of the reactants and products remain constant over time.The specific concentrations of the reactants and products at equilibrium depend on the equilibrium constant (K), which is a measure of the ratio of the concentrations of the products to the concentrations of the reactants at equilibrium.
If the initial concentrations of the reactants are known, the concentrations of the reactants and products at equilibrium can be calculated using the equilibrium constant.
To know more about equilibrium here
https://brainly.com/question/11336012
#SPJ4
Related Questions
isotopes are different forms of an element that have different blank . multiple select question. atomic weights atomic numbers numbers of neutrons numbers of protons
Answers
Same number of protons but different numbers of neutrons is the correct answer.
What are isotopes ?
Isotopes are variants of a chemical element that have the same number of protons in their atomic nucleus but differ in the number of neutrons. Isotopes of the same element have the same atomic number, but different atomic masses. For example, carbon-12, carbon-13, and carbon-14 are three isotopes of the element carbon.Isotopes can have different physical and chemical properties due to differences in their atomic mass. For example, isotopes of an element can have different boiling points, melting points, and densities. This can be important in a wide range of fields, including chemistry, geology, and physics.Some isotopes are unstable and undergo radioactive decay, which can result in the emission of alpha particles, beta particles, or gamma rays. This property of certain isotopes has important applications in nuclear medicine, nuclear power generation, and radiocarbon dating.
To learn more about the Isotopes, click the given link ;
https://brainly.com/question/14220416
#SPJ4
Describe the biochemical role of coenzyme Q10 and how supplementation may impact metabolism. Be sure to address the key terms listed below as part of your discussion; you may address additional etiologies as well. • coenzyme Q
• Electron transport chain • Complex II • Reactive oxygen species • Complex I
• Oxidative phosphorylation
• Complex III
• ubiquinone
• ubiquinol
Answers
Coenzyme Q10's main biochemical function is as a cofactor in the electron-transport chain, which is one of the series of redox processes required for the creation of adenosine triphosphate.
What is coenzyme ?A coenzyme is a chemical that collaborates with an enzyme to start or support the enzyme's operation. It may be viewed as a supporting molecule in a biological process.
Coenzyme Q10 is crucial for the functioning of all human tissues and organs since the majority of cellular processes depend on an appropriate supply of adenosine triphosphate (ATP).
A fat-soluble substance produced by the body, coenzyme Q10 can only be found in trace amounts in the food.
Coenzyme Q10 is essential for the formation of adenosine triphosphate and mitochondrial oxidative phosphorylation (ATP).
While its amount in our bodies declines with advancing age, it is crucial for optimum bodily functioning and must be consumed through a healthy diet.
Coenzyme Q10 regulates the different mediated inhibition, which enhances lipid metabolism and reduces obesity.
Thus, sufficient Q10 consumption prevents oxidative stress and delays the progression of aging.
To learn more about the coenzyme, follow the link;
https://brainly.com/question/29386956
#SPJ1
azulene and naphthalene (below) are cyclic, conjugated constitutional isomers with very different properties. naphthalene is colorless with no net dipole, while azulene is a bright blue compound with a very strong dipole. explain why the electronic properties of these molecules are so different. (this will require at least one resonance structure).
Answers
The differences in electronic properties between azulene and naphthalene can be ascribed to differences in their resonance structures, which influence and charge distribution in the molecule.
Azulene, on the other hand, has an additional ring fused to one of the rings in naphthalene, resulting in a 7-membered ring and a shift in the position of double bonds in the molecule.
: :
H2C=CH- -CH=CH2
|| \ / ||
H2C=CH CH=CH2
: \ / :
: C :
: // \\ :
: / \ :
: CH CH :
: \ / :
: \\ // :
: C :
: / \ :
H2C=CH CH=CH2
|| / \ ||
H2C=CH- -CH=CH2
: :
One of the azulene resonance structures has one carbon atom with a positive charge and one nitrogen element with a negative charge. Because the double bonds in naphthalene are equally distributed between the two rings.
: :
H2C=CH- -CH=CH2
|| \ / ||
H2C=CH CH=CH2
: || :
: || :
: C :
: || :
: C :
: || :
H2C=CH-CH=CH-CH=CH2
: || :
: C :
: || :
H2C=CH-CH=CH-CH=CH2
|| / \ ||
H2C=CH CH=CH2
: :
This results in the formation of a very strong dipole in the molecule, which adds to its bright blue color. Naphthalene, on the other hand, has two resonance patterns.
Learn more about Resonating structures
https://brainly.com/question/12193515
#SPJ4
this reaction has first order kinetics and a rate constant of 0.00151 s-1. if one starts with 3.489 m of p at time zero, what molarity of p will one have after 10.677 minutes?
Answers
The molarity of p after 10.677 minutes is approximately 1.950 M.
What is first-order kinetics ?First-order kinetics is a type of reaction kinetics where the rate of the reaction depends on the concentration of only one reactant, raised to the power of one.
If the reaction has first-order kinetics, the rate of the reaction can be described by the following equation:
rate = k[A]
Where
k is the rate constant [A] is the concentration of reactant AThe integrated rate law for a first-order reaction is:
ln([A]t/[A]0) = -kt
Where
[A]t is the concentration of A at time t [A]0 is the initial concentration of A k is the rate constant, and t is the time elapsedTo find the concentration of p after 10.677 minutes, we can plug in the values we have:
ln([A]t/[A]0) = -kt
ln([p]t/3.489 M) = -(0.00151 s^-1)(10.677 min)(60 s/min)
ln([p]t/3.489 M) = -1.026
Taking the exponential of both sides gives:
[p]t/3.489 M = e^-1.026
[p]t = (e^-1.026)(3.489 M) = 1.950 M
Therefore, the molarity of p after 10.677 minutes is approximately 1.950 M.
Learn more about first-order kinetics here : brainly.com/question/29734262
#SPJ1
CAN SOMEONE HELP WITH THIS QUESTION?✨
Answers
The quantity of the product obtained from the reaction is generally expressed in terms of the yield of the reaction. The amount obtained actually is called the actual yield.
What is theoretical yield?The amount of the product which is predicted by the stoichiometry is called the theoretical yield. A reaction yield is reported as the percentage of the theoretical amount.
The percentage yield is the ratio of actual yield to the theoretical yield.
% yield = Actual yield / Theoretical yield × 100
a. Molar mass of PbCO₃ = 267.21 g/mol
Molar mass of PbCl₂ = 278.1 g/mol
2.871 g of PbCO₃ gives:
2.871 × 278.1 / 267.21 = 2.988 g PbCl₂
b. % yield = 2.385 / 2.988 × 100 = 79.82 %
Thus the theoretical yield is 2.988 g and the % yield is 79.82 %.
To know more about % yield , visit;
https://brainly.com/question/29714892
#SPJ1
Draw the structure of the major organic product of the reaction below.CH3​CH2​OCH2​CH2​CH=CH2​+CH2​I2​ Zn(Cu)/ether. ​−- Use the wedge/hash bond tools to indicate stereochemistry where it exists. - Show stereochemistry in a meso compound. - If the reaction produces a racemic mixture, just draw one stereoisomer.
Answers
The major organic product of the reaction is a disubstituted dihalomethane, with a structure of [tex]CH3-CH(CH3)-CH-I-CH3[/tex]. This compound is optically inactive, and thus a meso compound.
The reaction of [tex]CH3-CH(CH3)-CH=CH2[/tex] with [tex]CH2I2[/tex] upon reacting with Zn(Cu) produces a meso compound, meaning that the molecule contains two or more identical groups attached to opposite sides of a stereocenter. Stereochemistry is not applicable here, so the structure does not need to be drawn with wedge/hash bonds. The reaction produces a racemic mixture, which means that the product is an equal mixture of two stereoisomers that are mirror images of each other. As such, since only one stereoisomer needs to be drawn, the structure of [tex]CH3-CH(CH3)-CH-I-CH3[/tex] is sufficient to represent the major organic product.
To learn more about meso compound click here https://brainly.com/question/12973507
#SPJ4
Which of the following structural features allow an alcohol to exhibit intermolecular hydrogen bonding? Select all that apply. Check all that apply. The presence of hydrogen atoms bonded to carbon The polar bond between oxygen and carbon The presence of nonbonding electron pairs on the oxygen atom A hydrogen atom bonded to a highly electronegative oxygen atom
Answers
An alcohol can display intermolecular hydrogen bonding if it has the following structural characteristics:
the oxygen atom having non-bonding electron pairs
An oxygen atom with a strong electronegative connection to a hydrogen atom
What is Bonding?
In chemistry, bonding refers to the formation of chemical bonds between atoms or molecules, resulting in the creation of a stable compound. Chemical bonding occurs when two or more atoms share, donate, or receive electrons in order to achieve a more stable electronic configuration.
The most common types of chemical bonding include covalent bonding, ionic bonding, and metallic bonding.
In covalent bonding, atoms share one or more pairs of electrons to form a molecule. Covalent bonds can be polar or nonpolar, depending on the electronegativity difference between the atoms.
In ionic bonding, one or more electrons are transferred from one atom to another, resulting in the formation of positive and negative ions that are attracted to each other.
These two features allow alcohols to form strong intermolecular hydrogen bonds between neighboring alcohol molecules. The polar bond between oxygen and carbon and the presence of hydrogen atoms bonded to carbon are important features of alcohol molecules, but they do not directly contribute to the ability of alcohols to exhibit intermolecular hydrogen bonding.
Learn more about Bonding from given link
https://brainly.com/question/819068
#SPJ4
Scottish physician and chemist William Cullen introduced bonding brackets and ____ to enable chemists to pictorially represent affinity reactions, and develop chemical reaction equations.
Answers
Scottish physician and chemist William Cullen introduced bonding brackets and affinity arrows to enable chemists to pictorially represent affinity reactions, and develop chemical reaction equations.
What did William Cullen introduce?William Cullen was a Scottish physician and chemist who lived from 1710 to 1790. He made significant contributions to the field of chemistry, including the development of the theory of "affinity," which helped explain chemical reactions.
Cullen's ideas were important precursors to the modern understanding of chemical bonding and reactions. His use of arrows to represent affinity is similar to the modern use of arrows to represent electron movement in chemical reactions. His use of brackets to represent the structure of molecules is also similar to modern notation.
Learn more about chemical bonds:https://brainly.com/question/15444131
#SPJ1
At a certain temperature, the equilibrium constant, Kc, for this reaction is 53.3.
H2 (g) + I2 (g) <----> 2HI (g) Kc=53.3
At this temperature, 0.500 mol of H2 and 0.500 mol of I2 were placed in a 1.00-L container to react. What concentration of HI is present at equilibrium?
HI = ....M
Answers
The concentration of HI present at equilibrium is 0.516 M when 0.500 mol of H2 and 0.500 mol of I2 were placed in a 1.00-L container to react.
The balanced chemical equation for the reaction is:
H2 (g) + I2 (g) ⇌ 2HI (g)
The initial molar concentrations are:
[H2] = 0.500 mol/1.00 L = 0.500 M
[I2] = 0.500 mol/1.00 L = 0.500 M
[HI] = 0 M (since there is no HI initially)
Let x be the change in concentration of H2, I2 and HI at equilibrium. Since 2 mol of HI is formed for every 1 mol of H2 or I2 reacted, the equilibrium concentrations can be expressed as:
[H2] = 0.500 - x
[I2] = 0.500 - x
[HI] = 2x
Substitute these expressions into the equilibrium constant expression:
[tex]Kc = [HI]^2 / ([H2] *[I2])[/tex]
[tex]53.3 = (2x)^2 / ((0.500 - x) * (0.500 - x))[/tex]
Solving for x using quadratic formula gives x = 0.258 M.
Therefore, the concentration of HI at equilibrium is:
[HI] = 2x = 2(0.258) = 0.516 M.
So the concentration of HI present at equilibrium is 0.516 M.
Learn more about equilibrium :
https://brainly.com/question/3920294
#SPJ4
Two different substances contain molecules of similar molar mass. However, one substance exhibits hydrogen bonding, while the other does not. Which of the following statements is true?
A. Both substances will have the same viscosity.
B. The substance that contains molecules that exhibit hydrogen bonding is non-polar.
C. The substance with molecules that do not exhibit hydrogen bonding will have a lower vapor pressure than the substance with molecules that do not exhibit hydrogen bonding.
D. The substance with molecules that exhibit hydrogen bonding will have a higher boiling point than the substance with molecules that do not exhibit hydrogen bonding.
Answers
It is true that the substance with hydrogen-bonded molecules will have a greater boiling point than the substance with non-hydrogen-bonded molecules.
Which substance will have molecules bound together by hydrogen?Hydrogen bonds can form in any molecule where an oxygen or nitrogen atom is directly connected to a hydrogen atom. Despite the absence of the HF group in other compounds, hydrogen bonds can still form when hydrogen is linked to fluorine.
What circumstances would hydrogen bonding exist in?An electronegative atom from another molecule, such as nitrogen, oxygen, or fluorine, interacts with a hydrogen atom to form a hydrogen bond. To establish the link, the hydrogen has to build a covalent bond with an additional electronegative atom.
To know more about hydrogen-bonded visit:-
https://brainly.com/question/17659933
#SPJ1
I need to know this question
Answers
The balanced chemical equation of the above reaction with the coefficients are as follows:
2CO₂ + 3H₂O → C₂H₅OH + 3O₂
What is a balanced equation?A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.
Coefficients are used to balance chemical equation by placing them in front of the substances involved in the reaction.
According to this question, carbondioxide reacts with water to produce ethanol and oxygen gas as follows:
2CO₂ + 3H₂O → C₂H₅OH + 3O₂
Learn more about balanced equation at: https://brainly.com/question/28294176
#SPJ1
for a 0.18m solution fo hno3, calculate [h }, ph, poh, and [oh-} determine all ph and poh values to two decimal places
Answers
HNO3 is a strong acid that dissociates completely in water, producing H+ and NO3- ions. Therefore, in a 0.18 M solution of HNO3, the concentration of H+ is also 0.18 M.
[H+] = 0.18 M
To calculate the pH of the solution, we use the formula:
pH = -log[H+]
pH = -log(0.18)
pH = 0.74
To calculate the pOH of the solution, we use the fact that pH + pOH = 14:
pOH = 14 - pH
pOH = 14 - 0.74
pOH = 13.26
To calculate the concentration of OH- ions, we use the formula:
[OH-] = Kw / [H+]
where Kw is the ion product constant of water, which is 1.0 × 10^-14 at 25°C.
[OH-] = 1.0 × 10^-14 / 0.18
[OH-] = 5.56 × 10^-14 M
Therefore, the [OH-] concentration is 5.56 × 10^-14 M.
To check our results, we can verify that pH + pOH = 14:
pH + pOH = 0.74 + 13.26 = 14.00
Therefore, our results are consistent with each other and with the principles of acid-base chemistry.
To learn more about Concentration :
https://brainly.com/question/3045247
#SPJ4
Select the correct answer.
A satellite completes one revolution of a planet in almost exactly one hour. At the end of one hour, the satellite has traveled 2.0 x 107 meters and is only 10
meters away from its starting point. What is the numerical value of the satellite's average velocity after that one hour?
Answers
A satellite terminates one revolution of a planet in one hour. At the end of one hour, the satellite has moved 2.0 x 10⁷ meters and is only 10 meters away from its starting point. After one hour, the average velocity of the satellite is 2.7 × 10 ⁻² m/s.
What is an average velocity?Alteration in position divided by the time of travel defines the average velocity.
Given:
Distance = 2.0 x 10⁷ meters
Time = 1 hour
Average speed is calculated as:
Average speed = distance covered by the object ÷ Time to cover the distance
= 2.0 x 10⁷ ÷ 1
= 2.0 x 10⁷ meters ÷ hour
= 5,555 and 5/9 meters/second.
Now,
The term velocity is defined as the ratio of displacement to the time for the displacement.
Velocity = Displacement / Time
= 10 meters/hour
= 0.002777 meters/second
= 2.7 × 10 ⁻² m/s
Thus, 2.7 × 10 ⁻² m/s is the satellite's average velocity after one hour.
To learn more about the average velocity, follow the link;
https://brainly.com/question/862972
#SPJ9
Radioactive decay follows first-order kinetics. If sodium-24 has a half-life of 14.96 hours, what is its rate constant, k?a. 4.63 × 10^−2 hr−1b. 4.36 × 10^−2 hr−1c. 4.93 × 10^−2 hr−1
Answers
If sodium-24 has a half-life of 14.96 hours then rate constant K is 0.0463 hr²−1 Rounded to two significant figures, the answer is (a) 4.63 × 10²−2 hr²−1.
The first-order rate equation is given by:
ln(N_t/N_0) = -kt
where N_0 is the initial amount of the substance, N_t is the amount of substance at time t, k is the rate constant, and ln is the natural logarithm.
The half-life of sodium-24 is given as 14.96 hours, which means that after 14.96 hours, the amount of sodium-24 will be reduced to half of its initial amount. Therefore, we can write:
N_t = (1/2)N_0
Substituting this into the first-order rate equation, we get:
ln(1/2) = -k(14.96)
Solving for k, we get:
k = [ln(1/2)]/14.96
k ≈ 0.0463 hr²−1
Therefore, the rate constant for the radioactive decay of sodium-24 is approximately 0.0463 hr²−1. Rounded to two significant figures, the answer is (a) 4.63 × 10²−2 hr²−1.
Learn more about sodium here:
https://brainly.com/question/29327783
#SPJ4
Which of the following compounds will hydrogen bond with water (H2O)? Select all that apply.
Answers
Only ethanol is among the possibilities given that can dissolve in water. This is because ethanol has an alcoholic functional group that will create a hydrogen bond with the proton in water.
Where can one locate hydrogen?Underground is where one can find the sole free hydrogen on earth. Stars and gas giant planets are where you'll find the majority of hydrogen. Hydrogen atoms are changed into helium atoms in the core of stars due to the intense pressure there.
Could hydrogen explode?Incorrect handling of the highly flammable gas utilized in fuel cells, hydrogen, can result in flames and explosions. A worker should always assume that a flame is present if they suspect a hydrogen leak because hydrogen fires are undetectable.
To know more about Hydrogen visit:
https://brainly.com/question/29765115
#SPJ1
Write symbols for four elements that may have ions with the following electron configuration: 1s22s22p6. (Include the charge of the ion with the symbol. For example, if "Ca2+" is the correct answer enter "Ca2+" in the box.) Write the most positive ion first and the most negative ion last.
Answers
The electron configuration 1s22s22p6 corresponds to the noble gas neon (Ne), which has a completely filled valence shell.
What is Electric Configuration?
The placement of electrons around the nucleus of a specific atom or molecule is known as its electronic configuration.
Protons, neutrons, and electrons are the minuscule components that make up an atom. There are the same number of protons and electrons in a neutral atom. The quantity and location of an atom's electrons are revealed by its electronic configuration.
We say that electrons orbit the nucleus of an atom, like the rings of Saturn orbit the planet. Electrons move in orbitals that can accommodate a specific number of electrons as they circle the nucleus.
Four elements that may have ions with this electron configuration are:
Fluorine (F-) - gains one electron to achieve a noble gas configuration (1s22s22p6)
Oxygen (O2-) - gains two electrons to achieve a noble gas configuration (1s22s22p6)
Sodium (Na+) - loses one electron from the valence shell to achieve a noble gas configuration (1s22s22p6)
Magnesium (Mg2+) - loses two electrons from the valence shell to achieve a noble gas configuration (1s22s22p6)
Therefore, the symbols for these ions are:
Na+, Mg2+, F-, O2-.
Learn more about Electronic Configuration from given link
https://brainly.com/question/26084288
#SPJ4
the phenol used in some mouthwashes and throat lozenges is . selected answer: correctc. hexylresorcinol answers: a. cannabinol b. cresol correctc. hexylresorcinol d. hexachlorophene
Answers
The correct answer to the question about the phenol used in some mouthwashes and throat lozenges is option C, hexylresorcinol.
This compound is a type of phenol that is used as an antiseptic and disinfectant in various products, including mouthwashes and throat lozenges.
It is effective in killing bacteria and other microorganisms that can cause infections and other health problems.
Therefore, the correct answer to this question is hexylresorcinol.
Hexylresorcinol is a substituted phenol with bactericidal, antihelminthic and potential antineoplastic activities.
Hexylresorcinol is used as an antiseptic in mouthwashes and skin wound cleansers.
The antibacterial effects of hexylresorcinol in vivo may be mediated through several mechanisms including reducing bacterial adherence to the pharynx, inhibiting bacterial biofilm formation, disrupting bacterial cell chain formation, and modifying cell surface hydrophobicity
To know more about phenol, refer here:
https://brainly.com/question/30650792#
#SPJ11
What type of radiation is released during this reaction?
Answers
This radiation can be emitted in the form of positively charged alpha particles, negatively charged beta particles, gamma rays, or x-rays, as explained below.
What is a gamma rays simple definition?Gamma rays are a type of electromagnetic radiation that results from a redistribution of electric charge within a nucleus. Gamma rays are essentially very energetic X rays ; the distinction between the two is not based on their intrinsic nature but rather on their origins.
Who invented gamma rays?chemist Paul Villard Gamma radiation is one of the three types of natural radioactivity discovered by Becquerel in 1896. Gamma rays were first observed in 1900 by the French chemist Paul Villard when he was investigating radiation from radium .
To know more about gamma rays visit
https://brainly.com/question/12528914
#SPJ1
Classify the strongest type of intermolecular force in the following interactions: solvent-solvent, solvent-solute, and solute-solute when solid glucose (C6H12O6) is placed in the water. Drag the terms on the left to the appropriate blanks on the right to complete the sentences
hydrogen bonding
dipole-dipole forces
London dispersion forces
ion-dipole forces
Solute-solute is .
Solvent-solvent is .
Solvent-solute is .
please fill one sentence for each blank
Answers
The interaction between polar water molecules and the partially charged ions of glucose, resulting in ion-dipole forces, is the strongest inter molecular force in the solvent-solute interaction.
What is the solute interaction?Solute interaction is the interaction between two or more solutes in a solution. This interaction can be either physical or chemical in nature. Physical interactions involve the solutes having an effect on each other due to their shape, size or charge. Chemical interactions involve the solutes reacting with each other to form new compounds. In either case, the solutes will have an effect on the properties of the solution such as viscosity, boiling point, freezing point, and solubility. Solutes can also interact with each other when they are mixed together, as in a mixture of two liquids or a mixture of two solids.
To learn more about solute interaction
https://brainly.com/question/14805127
#SPJ1
for each of the following pairs, predict which substance is more soluble in water. substance 1 compares to substance 2 ch3cho ch3ch2ch3 ch3co2h ch3(co)och3 (ch3)3cch2oh ch3(ch2)6oh ch3(ch2)4cooh (ch3)3ccooh ch3ch2oh ccl4 ch3oh ch3ch2oh
Answers
The soluble in water substances are:Ch3CHO is more soluble in water than CH3CH2CH3.
Ch3CO2H is more soluble in water than (CH3)3COCH3.
(CH3)3CCH2OH is more soluble in water than CH3(CH2)6OH.
In comparison to (CH3)3CCOOH, CH3(CH2)4COOH is more soluble in water.
CH3CH2OH is more soluble in water than CCl4.
CH3OH is more soluble in water than CH3CH2OH.
Ch3CHO (Acetaldehyde) is more soluble in water than Ch3CH2CH3 (Propane). This is due to Acetaldehyde containing a polar C=O bond which is hydrogen bonding with water molecules and is thus more soluble.
Ch3CO2H (Acetic Acid) is more soluble in water than Ch3(CO)OCH3 (Acetone). This is due to Acetic Acid containing an acidic hydrogen atom which is hydrogen bonding with water molecules and is thus more soluble.
(CH3)3CCH2OH (2-Methyl-2-propanol) is more soluble in water than Ch3(CH2)6OH (Hexanol). This is due to 2-Methyl-2-propanol containing a polar OH bond which is hydrogen bonding with water molecules and is thus more soluble.
Ch3(CH2)4COOH (Butyric Acid) is more soluble in water than (CH3)3CCOOH (2,2-Dimethylpropionic Acid). This is due to Butyric Acid containing an acidic hydrogen atom which is hydrogen bonding with water molecules and is thus more soluble.
Ch3CH2OH (Ethanol) is more soluble in water than CCl4 (Carbon Tetrachloride). This is due to Ethanol containing a polar OH bond which is hydrogen bonding with water molecules and is thus more soluble.
Ch3OH (Methanol) is more soluble in water than Ch3CH2OH (Ethanol). This is due to Methanol containing a strong hydrogen bond which is hydrogen bonding with water molecules and is thus more soluble.
learn more about Acetaldehyde Refer:brainly.com/question/15230495
#SPJ4
A student is provided an unknown hydrocarbon and perform a combustion experiment. Visually the result of the combustion experiment is a yellow flame that is not very intense and produced a small amount of smoke. Using techniques not discussed in the lab the student found that the combustion reaction produced 6 moles of carbon dioxide and 6 moles of water and that it is less than 5 carbons. Identify the name of the hydrocarbon used in this experiment and calculate the volume (mL) of the hydrocarbon starting material
Answers
The volume of the butane starting material is 24500 mL, or 24.5 liters.
We use the balanced chemical equation for the combustion of a hydrocarbon to determine the number of moles of the hydrocarbon that were used in the experiment:
Hydrocarbon + O₂ → CO₂ + H₂O
We know that 6 moles of CO₂ and 6 moles of H₂O were produced. This means that the hydrocarbon contained 6 carbon atoms (since each mole of CO₂ produced in the reaction comes from one carbon atom in the hydrocarbon).
Since we also know that the hydrocarbon has less than 5 carbons, this means that it must be either propane (C₃H₈) or butane (C₄H₁₀).
To determine which of these two hydrocarbons was used, we can calculate the theoretical yield of CO₂ for each one and compare it to the actual yield of 6 moles.
For propane, the theoretical yield of CO₂ would be 3 moles, while for butane, it would be 4 moles. Since the actual yield was 6 moles, it is more likely that butane was the hydrocarbon used.
To calculate the volume of the butane starting material, we need to use the ideal gas law:
PV = nRT
Rearranging the equation, we get:
V = nRT/P = (1 mol)(0.0821 L·atm/mol·K)(298 K)/(1 atm) = 24.5 L
Since the volume is in milliliters (mL), we can convert:
24.5 L x 1000 mL/L = 24500 mL
Therefore, the volume of the butane starting material is 24500 mL, or 24.5 liters.
To know more about volume here
https://brainly.com/question/1578538
#SPJ4
An average reaction rate is calculated as the change in the concentration of reactants or products over a period of time in the course of the reaction. An instantaneous reaction rateis the rate at a particular moment in the reaction and is usually determined graphically.
The reaction of compound A forming compound B was studied and the following data were collected:
Time (s) [A] (M)
0. 0.184
200. 0.129
500. 0.069
800. 0.031
1200. 0.019
1500. 0.016
Part A: What is the average reaction rate between 0. and 1500. s? Express your answer to three significant figures and include the appropriate units.
Part B: What is the average reaction rate between 500. and 1200. s ? Express your answer to three significant figures and include the appropriate units.
Part C: What is the instantaneous rate of the reaction at t=800. s? Express your answer to two significant figures and include the appropriate units.
Answers
The average reaction rate between 0 and 1500 s is -0.000105 M/s and the average reaction rate between 500 and 1200 s is -0.0000571 M/s
Part A: To calculate the average reaction rate, we can use the formula:
Average rate = (change in concentration)/(change in time)
The change in concentration of A is [A]t - [A]0, and the change in time is t - 0. Using the given data, we get:
Average rate = ([A]1500 - [A]0)/(1500 - 0) = (0.016 - 0.184)/(1500) = -0.000105 M/s
Therefore, the average reaction rate between 0 and 1500 s is -0.000105 M/s.
Part B: Following the same formula as above, we can calculate the average rate between 500 and 1200 s using the given data:
Average rate = ([A]1200 - [A]500)/(1200 - 500) = (0.031 - 0.069)/(700) = -0.0000571 M/s
Therefore, the average reaction rate between 500 and 1200 s is -0.0000571 M/s.
Part C: The instantaneous rate at t=800 s can be determined by drawing a tangent to the concentration vs. time plot at that point and finding its slope.
From the given data, we can plot [A] vs. time and draw a tangent at t=800 s
The slope of this tangent gives us the instantaneous rate at that point. Using a straight edge or ruler, we can estimate the slope to be approximately -0.0000575 M/s.
Therefore, the instantaneous rate of the reaction at t=800 s is approximately -0.0000575 M/s.
Learn more about reaction :
https://brainly.com/question/29039149
#SPJ4
When a spherical droplet of liquid is sheared into much finer droplets, which of the following statement is correct for the final droplets?
please explain your answer
a. The sum of the radii of all the droplets will be equal to the radius of the initial droplet
b. The mass of a single final droplet is same as that the initial droplet
c. The sum of the volume of all the final droplets is same as that of the initial droplet
d. The sum of the surface area of final droplets is same as that of the initial droplet
Answers
The sum of the volume of all the final droplets is the same as that of the initial droplet. So option C is correct.
When a spherical droplet of liquid is sheared into much finer droplets, the total volume of the initial droplet is conserved, but it is distributed among a greater number of smaller droplets.
Since volume is conserved, the sum of the volumes of all the final droplets is equal to the volume of the initial droplet.
Option a is incorrect because the sum of the radii of all the droplets will be greater than the radius of the initial droplet since the total surface area has increased due to the formation of additional droplets.
Option b is incorrect because when a droplet is sheared, it breaks up into smaller droplets, so the mass of each individual droplet will be less than the mass of the initial droplet.
Option d is incorrect because the surface area of the final droplets will be greater than the surface area of the initial droplet, as there are more droplets with a greater surface area in total.
To learn more about the surface area:
https://brainly.com/question/16519513
#SPJ4
Write the equation that models the alpha decay for plutonium-240.
Answers
Answer:
Explanation:
240 4 236
Pu ----> He + U
94 2 92
s 6 hno3 --> h2so4 6 no2 2 h2o in the above equation how many grams of water can be made when 8 grams of hno3 are consumed? use the following molar masses. if yo
Answers
For the given chemical equation, 8 grams of HNO₃ will produce 0.76 grams of water.
The chemical reaction is:
S + 6 HNO₃ → H₂SO₄ + 6 NO₂ + 2 H₂O
From the table we know that:
molar mass H = 1
molar mass N = 14
molar mass O = 16
Molar mass of water (H₂O) = 2 x molar mass H + molar mass O
= 2 + 16 = 18 gram/mole
Molar mass of HNO₃ = 1 + 14 + 3 x 16 = 63 gram/mole
8 gram HNO₃ is equivalent to 8/63 moles
6 moles HNO₃ produce 2 moles water
8/63 moles HNO₃ will produce (2/6) x (8/63) moles water
(2/6) x (8/63) moles H₂O is equivalent to (2/6) x (8/63) x 18 gram, which equals 0.76 gram water.
Your question is incomplete, most likely it was:
S + 6 HNO₃ → H₂SO₄ + 6 NO₂ + 2 H₂O
In the above equation how many grams of water can be made when 8 grams of hno3 are consumed? use the following molar masses
Element Molar Mass
Hydrogen 1
Nitrogen 14
Sulfur 32
Oxygen 16
Learn more about molar mass here:
https://brainly.com/question/21334167
#SPJ4
following is an equation for the reaction of diethyl ether and oxygen to form a hydroperoxide. reaction draw curved fishhook arrows to show the movement of electrons in this step of the reaction mechanism. assume that initiation is by a radical, .
Answers
The reaction of diethyl ether and oxygen to form a hydroperoxide can be represented as follows:
O2 + C2H5–O–C2H5 → C2H5–O–O–C2H5 + H2O
The curved fishhook arrows show the movement of electrons in this step of the reaction mechanism. The initiation of the reaction is by a radical, specifically a radical of the ether molecule. This radical abstracts an electron from the oxygen molecule, forming a new radical which reacts with the ether molecule, resulting in the formation of the hydroperoxide molecule and the release of water. The arrows indicate the movement of electrons from the oxygen molecule to the ether molecule.
O2 → •O2
•O2 + C2H5–O–C2H5 → C2H5–O–O–C2H5 + H2O
learn more about hydroperoxide Refer:brainly.com/question/16234960
#SPJ4
in one trial, you dissolve 0.1052 g of na2co3 in approximately 25 ml of water. titrating with your solution of hcl requires 13.23 ml to reach the equivalence point. report the molar concentration of hcl to the correct number of significant figures. your solution of hcl is lot number b5.
Answers
Rounding to the correct number of significant figures, the molarity of the HCl solution is 0.150 mol/L.
The balanced chemical equation for the reaction between sodium carbonate (Na2CO3) and hydrochloric acid (HCl) is:
Na2CO3 + 2 HCl → 2 NaCl + H2O + CO2 :From the equation, we can see that 2 moles of HCl are required to react with 1 mole of Na2CO3.
First, we need to determine the number of moles of HCl used in the titration:
moles of HCl = volume of HCl (in L) × molarity of HCl
We know the volume of HCl used in the titration is 13.23 mL, or 0.01323 L. We need to find the molarity of the HCl solution to determine the number of moles of HCl used.
To do this, we need to know the mass of Na2CO3 used in the titration and the balanced chemical equation to find the number of moles of Na2CO3:
molar mass of Na2CO3 = 2 × atomic mass of Na + atomic mass of C + 3 × atomic mass of O
= 2 × 22.99 g/mol + 12.01 g/mol + 3 × 16.00 g/mol
= 105.99 g/mol
moles of Na2CO3 = mass of Na2CO3 / molar mass of Na2CO3
= 0.1052 g / 105.99 g/mol
= 0.000992 mol
Since 2 moles of HCl are required to react with 1 mole of Na2CO3, the number of moles of HCl used in the titration is:
moles of HCl = 2 × moles of Na2CO3
= 2 × 0.000992 mol
= 0.001984 mol
Now we can calculate the molarity of the HCl solution:
molarity of HCl = moles of HCl / volume of HCl (in L)
= 0.001984 mol / 0.01323 L
= 0.1499 mol/L
To know more about molarity here
https://brainly.com/question/27220536
#SPJ4
when an electron jumps from a larger orbit to a smaller orbit within an atom, it changes from a energy level to a energy level and a photon is .
Answers
The electron changes from a higher energy level to a lower energy level, and a photon is emitted.
What is electrons?
Electrons are the smallest and most fundamental particles that make up matter. They are negatively charged particles that exist in the orbits of atoms and molecules and that participate in chemical reactions. Electrons are found in all atoms, and determine the chemical properties of the atom. They are also responsible for electricity and magnetism, and can be used to create electrical current in circuits. Electrons have a very small mass and move around the nucleus of an atom very quickly. In addition, electrons can be excited by certain energies, causing them to move to higher energy levels, where they can then be used to create electrical current.
Therefore, The electron changes from a higher energy level to a lower energy level, and a photon is emitted.
To learn more about electrons
Here: https://brainly.com/question/26084288
#SPJ4
compare current renewable and non-renewable energy sources with statistics quantity available, cost, sustainability, pollution factor, safety factor
Answers
Renewable resources are defined as resources that cannot be depleted over time. Non-renewable resources are defined as resources that are deplete over time.
Renewable energy is defined as the energy that is derived from natural sources that are replenished at a higher rate than they are consumed. For example sunlight and wind are such sources that are constantly being replenished. Renewable energy sources are present plentiful and are available all around us. The cost of renewable energy sources are less in comparison to non-renewable energy sources. Renewable sources usually are pollution free and safe towards human life.
Non-renewable energy is defined as the energy that comes from sources that will run out or will not be replenished in our lifetimes, or even in many, many lifetimes. Most of the non-renewable energy sources are fossil fuels which includes coal, petroleum, and natural gas. Non-renewable energy sources are available in limited quantity. Non-renewable energy sources are comparably more costly than renewable resources. Coals, petroleum and natural resources usually increases pollution and are harmful to human being.
Learn more about energy resources from the link given below.
https://brainly.com/question/10402348
#SPJ4
Two observations that indicate an organic liquid is dry when using the drying agent:
Answers
Two observations that can indicate that an organic liquid is dry when using the drying agent are:
When it's observed that the drying agent no longer clumps.When the organic layer isn't cloudy anymore (has become clear).Organic liquid is liquid that contains volatile organic compounds (often shorten to VOCs), such as crude oils and petroleum distillates. It is used in many stuff, ranging from paints, lacquers, glues, and adhesives; even in the production of dyes, textiles, and pharmaceuticals.
Drying agents are things that absorb moisture from their vicinity. They can be used to remove trace amounts of water from an organic solution. Some examples of drying agents are sodium metal or calcium hydride.
Learn more about drying agents at https://brainly.com/question/24174657
#SPJ4