Given the reaction below, which is the being oxidized?
Mg + Cl2 Right arrow. Mg2+ + 2Cl–
2CI–
CI2
Mg
Mg2

Answers

Answer 1

The ion that is oxidized in the above redox reaction is Mg (option A). Details about oxidation can be found below.

What is oxidation in a redox reaction?

Oxidation in a redox reaction is a reaction in which the atoms of an element lose electrons and the oxidation state of the element increases.

According to this question, the redox reaction is given as follows: Mg + Cl2 = Mg2+ + 2Cl–

As shown in the above redox reaction, Magnesium oxidation number increases from 0 to 2+, therefore, is the one being oxidized.

Learn more about oxidation at: https://brainly.com/question/9496279

#SPJ1

Answer 2

AnswerAAAAA

Explanation:


Related Questions

Which solution would contain the highest concentration of ions? a. 1.0 M CaCO3 b.1.0 M Na2SO4 O c. 1.0 M KCI d. 1.2 M NaCl e. 0.75 M LiBr

Answers

The solution that would contain the highest concentration of ions is the one that dissociates the most in water. option b, 1.0 M Na2SO4, will contain the highest concentration of ions as it produces a total of 3 ions when dissolved in water.

In this case, we need to consider the number of ions each compound will produce when dissolved in water.

a. 1.0 M [tex]CaCo_{3}[/tex] will dissociate into [tex]Ca_{2+}[/tex] and [tex]CO_{32-}[/tex] ions.

b. 1.0 M [tex]Na_{2}SO_{4}[/tex] will dissociate into 2 Na+ and [tex]SO_{42-}[/tex]ions.

c. 1.0 M KCI will dissociate into K+ and Cl- ions.

d. 1.2 M NaCl will dissociate into Na+ and Cl- ions.

e. 0.75 M LiBr will dissociate into Li+ and Br- ions.

Comparing the number of ions produced, option b, 1.0 M [tex]Na_{2}SO_{4}[/tex], will contain the highest concentration of ions as it produces a total of 3 ions when dissolved in water. The other options will only produce 2 ions or less.

To know more about ions, refer here:

https://brainly.com/question/13692734#

#SPJ11

procaine hydrochloride (mw = 272.77 g/mol) is used as a local anesthetic. calculate the molarity of a 3.548 m solution which has a density of 1.134 g/ml.

Answers

The molarity of the 3.548 m solution of procaine hydrochloride is 4.15 M. The molarity of the 3.548 m solution of procaine hydrochloride with a density of 1.134 g/ml can be calculated using the formula Molarity = (mass/volume) x (1/molecular weight).

First, we need to convert the density to mass/volume units, which is grams per liter (g/L). To do this, we multiply the given density by 1000 to get 1134 g/L.

Next, we can plug in the values we have into the formula:

Molarity = (1134 g/L) x (1/272.77 g/mol)

Molarity = 4.15 M

Therefore, the molarity of the 3.548 m solution of procaine hydrochloride is 4.15 M.

In explanation, molarity is a measure of the concentration of a solution, which is expressed in moles of solute per liter of solution. To calculate molarity, we need to know the mass of the solute in grams, the volume of the solution in liters, and the molecular weight of the solute in grams per mole. In this case, we were given the mass per volume (density) and the molecular weight, so we were able to convert the density to grams per liter and plug the values into the formula.

To learn more about Molarity refer to

https://brainly.com/question/2817451

#SPJ11

Describe the complete role of the acid catalyst in the rearrangement of pinacol. Select one: One acid molecule deprotonates a hydroxyl group and then another acid molecule deprotonates an oxygen after rearrangement The acid deprotonates a hydroxyl group and then the conjugate base protonates an oxygen after rearrangement. One acid molecule protonates a hydroxyl group and then another acid molecule protonates an oxygen after rearrangement. The acid protonates a hydroxyl group and then the conjugate base deprotonates an oxygen after rearrangement

Answers

The complete role of the acid catalyst in the rearrangement of pinacol involves the acid protonating a hydroxyl group and then the conjugate base deprotonating an oxygen after rearrangement.

The acid catalyst plays a crucial role in facilitating the rearrangement of pinacol, a reaction known as the pinacol rearrangement. In this rearrangement, a pinacol molecule undergoes a proton transfer and subsequent rearrangement to form a ketone.

Initially, the acid catalyst protonates one of the hydroxyl groups in pinacol, generating a carbocation intermediate. This protonation increases the electrophilic character of the carbon atom adjacent to the hydroxyl group, making it more susceptible to nucleophilic attack.

After the rearrangement step, where the carbocation undergoes a shift to form a more stable carbocation, the conjugate base of the acid catalyst deprotonates an oxygen atom. This deprotonation step helps restore the aromaticity of the system by eliminating the positive charge on the oxygen atom.

Overall, the acid catalyst in the pinacol rearrangement acts as a proton shuttle, facilitating the rearrangement by protonating a hydroxyl group initially and then allowing the conjugate base to deprotonate an oxygen atom after the rearrangement has occurred.

Learn more about ketone here: https://brainly.com/question/30459912

#SPJ11

A solution of NaOH has a concentration of 25% by mass. What mass of NaOH is present in 0. 250 g of this solution? Use the periodic table in the toolbar if needed. G.

Answers

The mass of NaOH present in 0.250 g of a solution with a concentration of 25% by mass, we need to calculate the mass of NaOH in the solution.

A 25% by mass solution means that 25 g of NaOH is present in 100 g of the solution. First, we calculate the mass of the solution:

Mass of solution = 0.250 g

Next, we can set up a proportion to find the mass of NaOH in the solution:

(25 g NaOH) / (100 g solution) = x / (0.250 g solution)

Cross-multiplying and solving for x:

x = (25 g NaOH) * (0.250 g solution) / (100 g solution)

x = 0.0625 g NaOH

Therefore, the mass of NaOH present in 0.250 g of the solution is approximately 0.0625 g.

This calculation is based on the assumption that the density of the solution is 1 g/mL (which is usually the case for aqueous solutions). If the density of the solution is different, the mass calculation may vary.

Learn more about mass of NaOH here

https://brainly.com/question/15299296

#SPJ11

a particular first-order reaction has a rate constant of 7.85 × 104 s-1 at 25.0 °c. what is the magnitude of k at 42.5 °c if ea = 34.7kj/mol?

Answers

A particular first-order reaction has a rate constant of 7.85 × 104 s-1 at 25.0 °c. The magnitude of k at 42.5 °C is 6.01 × 10^7 s^-1.

We can use the Arrhenius equation to relate the rate constant k at two different temperatures:

k2 = A * exp(-Ea/R * (1/T2 - 1/T1))

where k2 is the rate constant at the new temperature T2, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T1 is the initial temperature.

We are given k1 = 7.85 × 10^4 s^-1 at T1 = 25.0 °C = 298.15 K, Ea = 34.7 kJ/mol, and T2 = 42.5 °C = 315.65 K.

We can calculate A by rearranging the equation to solve for A:

A = k1 / exp(-Ea/R * 1/T1)

A = 7.85 × 10^4 s^-1 / exp(-34.7 kJ/mol / (8.314 J/mol·K) * (1/298.15 K))

A = 2.07 × 10^13 s^-1

Now, we can use A and Ea to calculate k2 at T2:

k2 = A * exp(-Ea/R * (1/T2 - 1/T1))

k2 = 2.07 × 10^13 s^-1 * exp(-34.7 kJ/mol / (8.314 J/mol·K) * (1/315.65 K - 1/298.15 K))

k2 = 2.07 × 10^13 s^-1 * exp(-3.86)

k2 = 6.01 × 10^7 s^-1

Therefore, the magnitude of k at 42.5 °C is 6.01 × 10^7 s^-1.

To learn more about first-order reaction refer here:

https://brainly.com/question/12446045#

#SPJ11

Use the References to access important values if needed for this question. The following standard reduction potentials have been determined for the aqueous chemistry of gold: Au3+(aq) + 2e → Au+(aq) Aut(aq) +e- —Au(s) E° = 1.290 V E° = 1.680 V Calculate the equilibrium constant (K) for the disproportionation of Aut(aq) at 25 °C. 3Aut(ag) 2Au(s) + Au3+(aq) K=

Answers

The value of equilibrium constant (K) for the disproportionation of Aut(aq) at 25 °C is 1.7109 × 10 ⁷⁰.

Modifying the given equations,

3 Au⁺ (aq) → 2Au (s) + Au³⁺ (aq)

2 Au⁺ (aq) + 2e⁻ → 2Au (s)

Reverse reaction,

Au (s) → Au³⁺ (aq) + 2e⁻

Adding the eqns,

[2 Au⁺ (aq) + 2e⁻ → 2Au (s)] + [Au (s) → Au³⁺ (aq) + 2e⁻] → [3 Au⁺ (aq) + 2 Au + Au³⁺]

E° cell = 3.360 - 1.290 = 2.070

E cell = E° cell - RT/nF ln K

At eq, E cell = 0

At 25° C , RT/F = 0.0256 V and number of electrons involved = 2

0 = E° cell - 0.0256/2 ln K

E° cell = 0.0256/2 ln K

2.070 = 0.0128 ln K

ln K = 161.718

K = e¹⁶¹.⁷¹⁸

K = 1.7109 × 10 ⁷⁰

Hence, the value of equilibrium constant (K) for the disproportionation of Aut(aq) at 25 °C is 1.7109 × 10 ⁷⁰.

Learn more about equilibrium constant from the link given below.

https://brainly.com/question/28559466

#SPJ4

Suppose one mixes 40.0 mL of a 0.25 M solution with 85.0 mL of a 0.12 M solution. Assuming volumes are additive, what is the molarity of the final solution?O a. 0.16 MO b. 0.016 MO c 0.37 MO d. 0.11 MO e cannot be determined; one must know the molar mass

Answers

The molarity of the final solution is (a) 0.16 M.

The first step in solving this problem is to calculate the total number of moles of solute present in each solution. To do this, we multiply the volume of each solution by its respective molarity.
For the 0.25 M solution, we have:
(40.0 mL) x (0.25 mol/L) = 10.0 mmol
For the 0.12 M solution, we have:
(85.0 mL) x (0.12 mol/L) = 10.2 mmol
Next, we add the two amounts of moles together to get the total number of moles in the final solution:
10.0 mmol + 10.2 mmol = 20.2 mmol
Finally, we divide the total number of moles by the total volume of the solution (which is the sum of the volumes of the two solutions) to get the molarity of the final solution:
(40.0 mL + 85.0 mL) = 125.0 mL = 0.125 L
Molarity = (20.2 mmol) / (0.125 L) = 0.16 M
Therefore, the answer is (a) 0.16 M.
Note that we did not need to know the molar mass of the solute to solve this problem.

To know more about molarity visit: https://brainly.com/question/8732513

#SPJ11

for 5 points, determine the ksp of cd(oh)2. its solubility is 1.2 x 10-6.

Answers

The Ksp (solubility product constant) of Cd(OH)2 can be determined based on its solubility, which is given as 1.2 x [tex]10^{-6}[/tex]. The Ksp of Cd(OH)2 is approximately 1.44 x [tex]10^{-12}[/tex].

The solubility product constant (Ksp) is a measure of the extent to which a sparingly soluble compound dissolves in water. It is defined as the product of the concentrations of the ions raised to the power of their stoichiometric coefficients in the balanced chemical equation for dissolution.

The balanced equation for the dissolution of Cd(OH)2 is:

Cd(OH)2 ⇌ Cd2+ + 2OH-

The solubility of Cd(OH)2 is given as 1.2 x [tex]10^{-6}[/tex], which represents the concentration of Cd2+ ions and OH- ions in the saturated solution. Since the stoichiometric coefficient of Cd2+ is 1 and the stoichiometric coefficient of OH- is 2, the concentration of Cd2+ ions can be considered as 1.2 x [tex]10^{-6}[/tex] M.

The Ksp expression for Cd(OH)2 can be written as:

Ksp = [Cd2+][tex][OH-]^2[/tex]

Substituting the known value of [Cd2+] as 1.2 x [tex]10^{-6}[/tex] M, we can calculate the value of [OH-] by dividing the solubility by the stoichiometric coefficient, giving [OH-] = (1.2 x [tex]10^{-6}[/tex] M) / 2 = 6 x [tex]10^{-7}[/tex] M.

Plugging these values into the Ksp expression, we get:

Ksp = (1.2 x [tex]10^{-6}[/tex] M)(6 x [tex]10^{-7}[/tex] M)^2

Ksp ≈ 1.44 x [tex]10^{-12}[/tex]

Therefore, the Ksp of Cd(OH)2 is approximately 1.44 x [tex]10^{-12}[/tex].

To learn more about solubility product constant, refer:-

https://brainly.com/question/1419865

#SPJ11

Using only the periodic table arrange the following elements in order of increasing ionization energy:
bismuth, polonium, radon, astatine
Lowest
1
2
3
4
highest

Answers

Using only the periodic table, we can arrange the given elements in order of increasing ionization energy as follows :-  Bi < Po < At < Rn.

The ionization energy of an element is the energy required to remove an electron from a neutral atom in the gas phase. As we move across a period from left to right, the ionization energy generally increases due to the increasing nuclear charge and decreasing atomic radius.

Similarly, as we move down a group, the ionization energy generally decreases due to the increasing distance between the outermost electrons and the nucleus.

1. Bismuth (Bi): The outermost electron of Bi is in the 6p orbital, and the atomic radius is relatively large. Thus, Bi has the lowest ionization energy among the given elements.

2. Polonium (Po): The outermost electron of Po is in the 6p orbital, but the atomic radius is smaller than Bi due to the smaller atomic size. Thus, Po has a slightly higher ionization energy than Bi.

3. Astatine (At): The outermost electron of At is in the 6p orbital, but the atomic radius is smaller than Po due to the increasing nuclear charge. Thus, At has a higher ionization energy than Po.

4. Radon (Rn): The outermost electron of Rn is in the 6p orbital, and the atomic radius is smaller than At due to the smaller atomic size. Thus, Rn has the highest ionization energy among the given elements.

To know more about ionization refer here :-

https://brainly.com/question/1602374#

#SPJ11

provide a reasonable mechanistic explanation for the formation of small amounts of 3,3,4,4-tetramethylhexane during the free-radical bromination of 2-methylbutane

Answers

The formation of small amounts of 3,3,4,4-tetramethylhexane can be explained by the formation of a resonance-stabilized bromine radical intermediate and subsequent rearrangement reactions.

During the free-radical bromination of 2-methylbutane, small amounts of 3,3,4,4-tetramethylhexane are formed due to the formation of a resonance-stabilized bromine radical intermediate. When bromine reacts with 2-methylbutane, it forms a bromine radical that attacks one of the methyl groups on the 2-methylbutane molecule, forming a primary radical. This primary radical then reacts with another molecule of bromine to form a secondary radical.
The secondary radical can then undergo a rearrangement reaction, where it forms a tertiary radical. This tertiary radical can then react with another molecule of bromine to form the final product, 3,3,4,4-tetramethylhexane.
The formation of the resonance-stabilized bromine radical intermediate allows for the formation of the tertiary radical, which then leads to the formation of the final product. Although the formation of 3,3,4,4-tetramethylhexane is only a minor product, it demonstrates the complexity of the free-radical bromination reaction and the variety of products that can be formed.

To know more about 2-methylbutane visit:

brainly.com/question/20709119

#SPJ11

convert the following sinusoids to phasors in polar form (a) –20 cos(4t 135°) (b) 8 sin(20t 30°) (c) 20 cos(2t) 15 sin(2t)

Answers



To convert sinusoids to phasors in polar form, we need to first identify the amplitude and phase angle of the signal. For a sinusoid of the form A*cos(ωt + φ), the amplitude is A and the phase angle is φ. Once we have these values, we can represent the signal as a complex number in polar form, given by A*exp(jφ), where j is the imaginary unit.

Using this method, we can convert the following sinusoids to phasors in polar form:

(a) -20*cos(4t + 135°)

Amplitude: 20
Phase angle: -45° (subtract 180° from 135°)

Phasor in polar form: 20*exp(-j45°)

(b) 8*sin(20t + 30°)

Amplitude: 8
Phase angle: 30°

Phasor in polar form: 8*exp(j30°)

(c) 20*cos(2t) + 15*sin(2t)

To convert this to a single sinusoid, we can use the identity sin(x + y) = sin(x)cos(y) + cos(x)sin(y) and write:

20*cos(2t) + 15*sin(2t) = sqrt(20^2 + 15^2)*cos(2t + θ)

where cos(θ) = 20/sqrt(20^2 + 15^2) and sin(θ) = 15/sqrt(20^2 + 15^2). Therefore:

Amplitude: sqrt(20^2 + 15^2) = 25
Phase angle: θ = tan^-1(15/20) = 36.87°

Phasor in polar form: 25*exp(j36.87°)

In (a), we have a negative amplitude and a phase angle of 135°. To convert this to polar form, we need to subtract 180° from the phase angle to get it in the range of -180° to 180°. This gives us a phase angle of -45° and a positive amplitude of 20.

In (b), we have a positive amplitude and a phase angle of 30°. We can represent this as a complex number in polar form by multiplying the amplitude by the exponential of the phase angle, which gives us a phasor of 8*exp(j30°).

In (c), we have a sum of two sinusoids. To convert this to a single sinusoid, we can use the identity sin(x + y) = sin(x)cos(y) + cos(x)sin(y). This allows us to rewrite the signal as a single cosine wave with an amplitude of 25 and a phase angle of 36.87°. We can then represent this as a phasor in polar form by multiplying the amplitude by the exponential of the phase angle, which gives us a phasor of 25*exp(j36.87°).

learn more about sinusoids

https://brainly.com/question/29529184

#SPJ11

The sinusoid -20cos(4t + 135°) can be expressed in polar form as a phasor of 20exp(-j45°), whereas the sinusoid 8sin(20t + 30°) can be represented as a phasor of 8exp(j30°).

How to solve

The value of (a) is represented by a phase angle of 135° and a negative amplitude. In order to transform this into polar form, it is necessary to deduct 180 degrees from the phase angle so it can be within the limit of -180 degrees to 180 degrees.

We can determine a negative phase angle of 45 degrees and a 20-unit magnitude in the positive direction.

The value of (b) shows a constructive magnitude and a 30° angle of phase. A phasor of 8 multiplied by the exponential of the phase angle can be utilized to express this as a complex number in polar form, resulting in 8*exp(j30°).

In condition (c), we are presented with the addition of two sinusoidal waves. We can transform this into a solitary sinusoidal wave by applying the formula sin(x + y) = sin(x)cos(y) + cos(x)sin(y).

We can cleverly rework the signal to be expressed as a solitary cosine wave, possessing an amplitude of 25 and a phase angle measuring 36. 87°

Similarly, the combination of 20cos(2t) + 15sin(2t) can be represented by a single phasor of 25*exp(j36. 87°)

Read more about sinusoids here:

https://brainly.com/question/13170815

#SPJ4

which of the following molecules is not infrared active? a) n2 b) no c) co d) co2

Answers

The molecule that is not infrared active is (a) [tex]N_2[/tex].

Which molecule among N2, NO, CO is not infrared active?

Infrared spectroscopy is a powerful tool used to study molecular vibrations. Infrared-active molecules have a change in their dipole moment during vibration, resulting in absorption of infrared radiation. [tex]N_2[/tex], or nitrogen gas, consists of two nitrogen atoms bonded together by a triple bond, and it is a homonuclear diatomic molecule. It does not possess a permanent dipole moment and therefore does not undergo a change in dipole moment during vibration. As a result, [tex]N_2[/tex] is not infrared active.

Infrared spectroscopy is a technique that examines the interaction of infrared radiation with molecules, providing valuable information about their structure and chemical composition. By studying the absorption and emission of infrared light, scientists can identify functional groups, determine bond types, and analyze molecular vibrations. Infrared-active molecules exhibit distinct peaks in their infrared spectra, indicating specific vibrational modes. In contrast, molecules like [tex]N_2[/tex], which lack a permanent dipole moment, do not exhibit these characteristic peaks and are considered infrared inactive. Understanding the concept of infrared activity is essential for interpreting infrared spectra and gaining insights into the molecular properties of various substances.

Learn more about infrared active molecules

brainly.com/question/13644216

#SPJ11

A gas sample at STP contains 1.15 g oxygen and 1.55 g nitrogen. What is the volume of the gas sample? (a) 1.26 L (b) 2.04 L (c) 4.08 L (d) 61.0 L

Answers

To solve this problem, we can use the ideal gas law: PV = nRT. However, since the gas is at STP (Standard Temperature and Pressure), we can use the simplified equation: V = nRT/P, where P is the pressure at STP (1 atm) and T is the temperature at STP (273.15 K).

First, we need to find the number of moles of each gas in the sample. We can use the molar mass of each gas to convert the given masses to moles:

moles of oxygen = 1.15 g / 32.00 g/mol = 0.0359 mol
moles of nitrogen = 1.55 g / 28.01 g/mol = 0.0553 mol

Next, we can calculate the total number of moles in the sample:

total moles = moles of oxygen + moles of nitrogen
total moles = 0.0359 mol + 0.0553 mol
total moles = 0.0912 mol

Now we can plug in the values into the simplified equation for volume:

V = nRT/P
V = (0.0912 mol)(0.0821 L·atm/mol·K)(273.15 K)/(1 atm)
V = 2.04 L

Therefore, the volume of the gas sample is 2.04 L. The answer is (b).

learn more

about STP

https://brainly.in/question/4028492?referrer=searchResults

#SPJ11

What is the equilibrium constant (Kp) at 45 °C for the reaction below, given the thermodynamic values: AG°f (O3(g)) = 163.4 kJ/mole and AG°f (O2(g) = 0 kJ/mole 203(g) 3 029) 131.9 O 1.93 x 1057 O 4.80 x 1053 O 1.07 x 10-57

Answers

To determine the equilibrium constant (Kp) at 45 °C for the given reaction, we need the standard Gibbs free energy change (ΔG°) for the reaction.

The ΔG° can be calculated using the standard Gibbs free energy of formation (ΔG°f) values for the reactants and products.

The balanced equation for the reaction is:

2 O3(g) ⟶ 3 O2(g)

Given thermodynamic values:
ΔG°f(O3(g)) = 163.4 kJ/mol
ΔG°f(O2(g)) = 0 kJ/mol

The ΔG° for the reaction can be calculated as follows:

ΔG° = (3 × ΔG°f(O2(g))) - (2 × ΔG°f(O3(g)))
    = (3 × 0 kJ/mol) - (2 × 163.4 kJ/mol)
    = -326.8 kJ/mol

Now, we can use the Van 't Hoff equation to relate the equilibrium constant (Kp) to the ΔG° and temperature (T):

ln(Kp) = -ΔG° / (R × T)

where:
R = Gas constant = 8.314 J/(mol·K)
T = Temperature in Kelvin (45 °C = 318.15 K)

Substituting the values into the equation:

ln(Kp) = -(-326.8 kJ/mol) / (8.314 J/(mol·K) × 318.15 K)
       = 326800 J/mol / (8.314 J/(mol·K) × 318.15 K)
       = 124.15

Taking the exponential of both sides to solve for Kp:

Kp = e^(ln(Kp))
   = e^(124.15)
   ≈ 1.35 × 10^53

Therefore, the equilibrium constant (Kp) at 45 °C for the given reaction is approximately 1.35 × 10^53.

To learn more about equilibrium :

https://brainly.com/question/30694482

#SPJ11

Obtain a copy of the Plan an Investigation Student Guide for this lab. Your teacher may provide a copy, or you can select the link to access it. Be sure to read the entire Student Guide for this lab. It is important that you also follow all safety guidelines. If you need to review them, refer to the Lab Safety Agreement. Use the drop-down menus to answer the questions. Did you read through the Plan an Investigation Student Guide for this lab? Did you review the Lab Safety Agreement, if necessary? Now, follow the Student Guide and plan your investigation, with your teacher's guidance. Did you complete the investigation?

Answers

it is recommended that you obtain a copy of the Plan an Investigation Student Guide for the lab in question.

This can be provided by your teacher or accessed through a link that may be provided. Once you have obtained the guide, it is important that you read through the entire Student Guide for this lab. This will help you understand the instructions, procedures, and expectations for the investigation you will be conducting. Additionally, be sure to follow all safety guidelines. You can refer to the Lab Safety Agreement if you need to review them. Next, follow the Student Guide and plan your investigation with your teacher's guidance. This may involve developing a hypothesis, identifying variables, designing an experiment, collecting data, analyzing results, and drawing conclusions .Finally, once you have completed the investigation, you should be prepared to present your findings to your teacher or class. This may involve creating a report, poster, or presentation that summarizes your research and conclusions.

Learn more about lab here:

https://brainly.com/question/29296260

#SPJ11

(b) identify the color of a compound that absorbs blue-green light?

Answers

The color of a compound that absorbs blue-green light is likely to appear orange

When a compound absorbs light of a specific color, it typically reflects or transmits the complementary color. Complementary colors are opposite each other on the color wheel. Blue-green light has a wavelength of around 480-520 nanometers (nm). When this light is absorbed by a compound, the complementary color is the one reflected or transmitted, the complementary color of blue-green light is a mix of red and yellow, which is generally perceived as orange.

The compound absorbs the blue-green portion of the light spectrum and reflects or transmits the orange light, which is what we perceive as the color of the compound. This principle is applicable in various fields such as chemistry, physics, and art, where understanding the interactions of colors and light is essential for predicting the appearance of substances or materials. Therefore, the color of a compound that absorbs blue-green light is likely to appear orange.

Learn more about complementary color at

https://brainly.com/question/30784226

#SPJ11

enanimines and imines are tuatomers that contain n atoms. draw a stepwise mechanism for the acid-catalyzed conversion

Answers

The acid-catalyzed conversion of enamines to imines involves a stepwise mechanism that includes protonation, rearrangement, and deprotonation.

The terms enamines, imines, and tautomers are essential in understanding the acid-catalyzed conversion mechanism. Enaminines and imines are tautomers, which means they are isomers that can readily interconvert by the transfer of a hydrogen atom. In this case, they contain nitrogen (N) atoms.

For the acid-catalyzed conversion of enamines to imines, the stepwise mechanism is as follows:

1. Protonation: The enamine reacts with an acid (e.g. H₃O⁺), and the nitrogen atom (N) in the enamine becomes protonated, forming a positively charged intermediate.

2. Rearrangement: The positively charged intermediate undergoes a 1,2-hydride shift (a hydrogen atom with its two electrons is transferred to the neighboring carbon atom).

3. Deprotonation: The positively charged nitrogen atom in the iminium ion is deprotonated by a water molecule, leading to the formation of the imine and regeneration of the acid catalyst.

Learn more about tautomers at https://brainly.com/question/16857794

#SPJ11

a 325 ml sample of gas is initially at a pressure of 721 torr and a temperature of 32c if this gas is compressed to a volume of 296 ml and the pressure increases to 901 torr, what will be the new temperature of the gas

Answers

The new temperature of the gas will be 61.9°C.

What is the new temperature of the gas?

To solve this problem, we can use the combined gas law, which relates the initial and final conditions of pressure, volume, and temperature.

The combined gas law equation is as follows:

(P₁V₁) / T₁ = (P₂V₂) / T₂

Given:

P₁ = 721 torr (initial pressure)

V₁ = 325 mL (initial volume)

T₁ = 32°C (initial temperature)

V₂ = 296 mL (final volume)

P₂ = 901 torr (final pressure)

T₂ = ? (final temperature)

Converting temperatures to Kelvin:

T₁ = 32 + 273.15 = 305.15 K

Now we can rearrange the combined gas law equation to solve for T₂:

T₂ = (P₂V₂ * T₁) / (P₁V₁)

Substituting the given values:

T₂ = (901 torr * 296 mL * 305.15 K) / (721 torr * 325 mL)

T₂ ≈ 61.9°C

Therefore, the new temperature of the gas will be approximately 61.9°C.

To know more about Kelvin, refer here:

https://brainly.com/question/30542272#

#SPJ4

(Eq. 7) of our synthesis involves both an Oxidation and a Reduction of Copper. Show this by appropriate assignment of Oxidation States. Is this a Disproportionation reaction? Explain. CuCl(aq) + Cu(s) + 4 Cl(aq) 2 CuCl(aq) (Eq.7)

Answers

In Eq. 7, the oxidation state of copper in CuCl(aq) is +2, while in Cu(s) it is 0. After the reaction, both copper atoms in CuCl(aq) have an oxidation state of 0, while the copper atom in Cu(s) has an oxidation state of +2. This indicates that there was a reduction of copper in CuCl(aq) and an oxidation of copper in Cu(s).

This reaction is not a disproportionation reaction because the same element (copper) is not being simultaneously oxidized and reduced. Rather, one copper species is being oxidized while another copper species is being reduced.
Hi! I'd be happy to help you with your question.

In equation 7, CuCl(aq) + Cu(s) + 4 Cl(aq) → 2 CuCl2(aq), we can analyze the oxidation and reduction of copper by determining the oxidation states of the elements involved.

Copper in CuCl has an oxidation state of +1. In the solid copper, Cu(s), the oxidation state is 0. In the product CuCl2, the oxidation state of copper is +2.

During the reaction, Cu in CuCl maintains its oxidation state of +1. However, Cu(s) is oxidized from an oxidation state of 0 to +2. Simultaneously, the Cu(II) from CuCl2 is reduced to Cu(I) in CuCl. Therefore, both oxidation and reduction of copper are present in this reaction.

This reaction is not a disproportionation reaction because a disproportionation reaction occurs when an element in a single species is both oxidized and reduced. In this case, the oxidation and reduction of copper occur in two different species, CuCl and Cu(s), rather than within a single species.

To know more about oxidation state visit:-

https://brainly.com/question/31688257

#SPJ11

true/false. the avr uses the term twi instead of i2c.

Answers

True.

AVR, which stands for Advanced Virtual RISC, uses the term TWI (Two-Wire Interface) instead of I2C (Inter-Integrated Circuit) to refer to a communication protocol that allows for simple, two-wire serial communication between multiple devices on a shared bus.

TWI and I2C are very similar protocols, but TWI is specific to AVR microcontrollers, while I2C is a more general protocol used by many different manufacturers.

The TWI protocol was developed by Atmel (now part of Microchip Technology) specifically for their AVR microcontrollers, and it is essentially a subset of the I2C protocol. So while the two protocols are very similar, they are not exactly the same.

Learn more about protocol here :

https://brainly.com/question/24678664

#SPJ11

determine the oxidation number of elements indicated in each of the following compounds: c in h2co3 n in n2 zn in zn(oh)42- n in no2- li in lih fe in fe3o4

Answers

The oxidation numbers are: [tex]C^4^+ N^-^3 Zn^2^+ N^3^+ Li^+ Fe^2^+ and Fe^3^+[/tex]

What are the oxidation numbers of the elements?

In H₂CO₃, the oxidation number of C is +4 because oxygen has an oxidation number of -2 and hydrogen has an oxidation number of +1.

In N₂, the oxidation number of N is 0 since it is a diatomic molecule.

In Zn(OH)₄²⁻, the oxidation number of Zn is +2 since the overall charge of the complex ion is -2.

In NO₂⁻, the oxidation number of N is +3 because oxygen has an oxidation number of -2 and the overall charge of the ion is -1.

In LiH, the oxidation number of Li is +1 since hydrogen has an oxidation number of -1.

In Fe₃O₄, the oxidation number of Fe is both +2 and +3. In this compound, two of the iron atoms have an oxidation number of +2, and one of the iron atoms has an oxidation number of +3.

Learn more about Oxidation numbers

brainly.com/question/29100691

#SPJ11

What will happen to the pH or pure water if 5.0 grams NaNO3 is added? (Hint: Split the compound apart into separate ions, determine if either is acidic, basic or neutral.) a) Increase b) Not enough information given c) Decrease d) Remains the same

Answers

When NaNO3 is added to pure water, it dissociates into its constituent ions, Na+ and NO3-. Na+ is a neutral ion and has no effect on the pH of the solution. However, NO3- is the conjugate base of a weak acid (HNO3), which means it can accept H+ ions and increase the pH of the solution.

Since there are no other acidic or basic substances present in the solution, we can conclude that the addition of NaNO3 will increase the pH of pure water. This is because the NO3- ion will react with water to form HNO3 and OH- ions. The OH- ions will then increase the pH of the solution, making it more basic. The extent of the pH increase will depend on the concentration of NaNO3 added. In general, the more NaNO3 added, the greater the increase in pH.
The answer to the question is a) Increase. The addition of NaNO3 will increase the pH of pure water due to the formation of OH- ions from the reaction between NO3- and water.

Learn more about conjugate base here ;

https://brainly.com/question/30225100

#SPJ11

write the formula for a complex formed between zn2 and oh− with a coordination number of 4.
Write the formula for a complex formed between Zn2 and OH

Answers

The formula for the complex formed between Zn2+ and OH− with a coordination number of 4 is [Zn(OH)4]2−.

When Zn2+ ions combine with four OH− ions, a complex ion is formed. The coordination number of this complex ion is 4, meaning that the Zn2+ ion is surrounded by four OH− ions in a tetrahedral arrangement. The formula for this complex ion is written by placing the Zn2+ ion in the center and surrounding it with four OH− ions. The charge on the complex ion must be balanced, so two negative charges are needed. This is accomplished by adding a 2− superscript to the formula.

In coordination chemistry, a complex ion is formed when a central metal ion or atom is surrounded by other ions or molecules, known as ligands. The coordination number is the number of ligands that are attached to the central metal ion. In the case of Zn2+ and OH−, when four OH− ions surround the Zn2+ ion, a coordination number of 4 is obtained.

To know more about coordination number visit:

https://brainly.com/question/16236454

#SPJ11

why is it important to do the calibration of the dropper quickly

Answers

The calibration of the dropper refers to the process of accurately measuring and adjusting the amount of liquid that can be dispensed from the dropper.

It is important to do this calibration quickly because any delay in the calibration process can result in inaccurate measurements and an improper dosage of the liquid being administered.



If the dropper is not properly calibrated, it can lead to either underdosing or overdosing, which can have serious consequences. Underdosing can result in ineffective treatment,

while overdosing can cause harm or toxicity to the patient. Additionally, inaccurate measurements can also lead to inconsistencies in the treatment, making it difficult to track progress and adjust the treatment plan accordingly.



By doing the calibration of the dropper quickly, healthcare professionals can ensure that the liquid being dispensed is accurately measured and administered to the patient.

This helps to avoid any potential harm or side effects that may result from inaccurate measurements, and also ensures that the patient receives the appropriate dosage required for effective treatment.

Therefore, it is crucial to prioritize the calibration of the dropper and complete it as quickly as possible to ensure the safety and well-being of the patient.

To know more about amount of liquid  refer here

https://brainly.com/question/24972177#

#SPJ11

Rank the following complex ions in order of increasing wavelength of light absorbed.
[Co(H2O)6]3+, [CO(CN)6]3-, [CO(I)6]3-, [Co(en)3]3+

Answers

Complex ions in order of increasing wavelength of light absorbed:

[Co(H₂O)₆]³⁺ < [Co(en)₃]³⁺ < [CO(I)₆]³⁻ < [CO(CN)₆]³⁻

The wavelength of light absorbed by a complex ion is related to the energy required to promote an electron from a lower energy level (ground state) to a higher energy level (excited state).

The energy required is proportional to the frequency (and inversely proportional to the wavelength) of the absorbed light. Therefore, the order of increasing wavelength of light absorbed corresponds to the order of decreasing energy required to promote an electron to an excited state.

Based on the ligand field theory, the ligands affect the energy of the d orbitals of the central metal ion, which in turn affects the energy required to promote an electron to an excited state.

Strong field ligands (such as CN⁻) cause a greater splitting of the d orbitals, leading to higher energy transitions, while weak field ligands (such as H₂O) cause less splitting and lower energy transitions.

Using this information, we can rank the complex ions in order of increasing wavelength of light absorbed:

[Co(H₂O)₆]³⁺  < [Co(en)₃]³⁺ < [CO(I)6]3- < [CO(CN)6]3-

- [Co(H₂O)₆]³⁺ : This complex ion has a weak field ligand (H₂O), leading to a smaller splitting of the d orbitals and lower energy transitions. Therefore, it absorbs light at longer (lower) wavelengths, corresponding to lower energy.

- [Co(en)₃]³⁺: This complex ion has a stronger field ligand (en = ethylenediamine), leading to a larger splitting of the d orbitals and higher energy transitions than [Co(H₂O)₆]³⁺ . Therefore, it absorbs light at slightly shorter (higher) wavelengths than [Co(H₂O)₆]³⁺ .

- [CO(I)₆]³⁻: This complex ion has a larger and more extended ligand field compared to [Co(H₂O)₆]³⁺  and [Co(en)₃]³⁺ due to the larger size of the I⁻ ion. This causes an even larger splitting of the d orbitals and higher energy transitions, leading to absorption of light at even shorter (higher) wavelengths.

- [CO(CN)₆]³⁻: This complex ion has the strongest field ligand (CN⁻), causing the largest splitting of the d orbitals and the highest energy transitions. Therefore, it absorbs light at the shortest (highest) wavelengths, corresponding to the highest energy.

To learn more about Complex ions refer here:

https://brainly.com/question/31310283#

#SPJ11

Wax is a saturated hydrocarbon, a covalent compound. Wax is not soluble in water yet sugar is also a covalent compound and is soluble in water. Look at the structure of both compounds and explain what could justify these results

Answers

The reason why these two compounds are soluble in water is due to the differences in their structural makeup.

Wax and sugar both are covalent compounds but have different solubility in water due to their structural differences. Wax is a hydrophobic molecule and does not dissolve in water because of its non-polar nature. This is due to the long nonpolar hydrocarbon chain present in wax. On the other hand, sugar is a hydrophilic molecule and is soluble in water due to its polar nature. Sugar is a polar molecule that contains many polar hydroxyl functional groups (-OH) that have the ability to form hydrogen bonds with water molecules and thus dissolve in water. So, in conclusion, the difference in the structure of these two compounds is the justification for their solubility in water.

Learn more about compounds here:

https://brainly.com/question/32300619

#SPJ11

provide an acceptable name of the compound below. spell out the full name of the compound.

Answers

The compound is called 2,4-dimethylpentane.

What is the full name of the compound?

2,4-dimethylpentane is a hydrocarbon compound consisting of five carbon atoms arranged in a linear chain with two methyl groups attached to the second and fourth carbon atoms. The prefix "2,4-dimethyl" indicates the positions of the methyl groups, while "pentane" signifies the presence of a five-carbon chain. This compound belongs to the alkane family, which is characterized by single bonds between carbon atoms and saturated hydrocarbon structures.

2,4-dimethylpentane is an organic compound commonly used as a solvent in various industries, including pharmaceuticals, paints, and coatings. Its unique molecular structure and chemical properties make it an effective choice for dissolving nonpolar substances. It is a clear liquid with a strong hydrocarbon odor and is highly flammable.

Learn more about Compound

brainly.com/question/14117795

#SPJ11

Methanol is a high-octane fuel used in high-performance racing engines. Calculate ΔG° for the reaction: 2CH3OH(g) + 3O2(g) → 2CO2(g) + 4H2O(g)
look up thermodynamic values ?

Answers

The standard Gibbs free energy change for the reaction is -1291.5 kJ/mol. This negative value indicates that the reaction is thermodynamically favorable, meaning that it will proceed spontaneously in the forward direction under standard conditions. This suggests that methanol can be an effective high-octane fuel for high-performance racing engines.

To calculate the standard Gibbs free energy change (ΔG°) for the reaction 2CH3OH(g) + 3O2(g) → 2CO2(g) + 4H2O(g), we need to use thermodynamic values for the standard enthalpy change (ΔH°) and the standard entropy change (ΔS°) for the reaction.

Using the values provided by a standard thermodynamic table, we find that ΔH° for the reaction is -1455.1 kJ/mol and ΔS° is -550.2 J/K·mol.

We can then use the equation ΔG° = ΔH° - TΔS°, where T is the temperature in Kelvin, to calculate the standard Gibbs free energy change for the reaction. Assuming a temperature of 298 K, we get:

ΔG° = (-1455.1 kJ/mol) - (298 K)(-550.2 J/K·mol)
ΔG° = -1455.1 kJ/mol + 163.6 kJ/mol
ΔG° = -1291.5 kJ/mol

Therefore, the standard Gibbs free energy change for the reaction is -1291.5 kJ/mol. This negative value indicates that the reaction is thermodynamically favorable, meaning that it will proceed spontaneously in the forward direction under standard conditions. This suggests that methanol can be an effective high-octane fuel for high-performance racing engines.

To know more about methanol click here:

https://brainly.com/question/3006705

#SPJ11

Write the balanced chemical reaction for the following nitrogen cycle reactions. These reactions are mediated by bacteria and plants in nature and in wastewater treatment. (a) nitrification of ammonium to nitrite using molecular oxygen. (b) nitrification of nitrite to nitrate using molecular oxygen. (c) denitrification of nitrate to N2 using succinic acid as the carbon & energy source. (d) If a wastewater effluent has an ammonium concentration of 12 mg/L as N, what is the nitrogenous oxygen demand (how much O2 in mg/L would be required to oxidize the ammonium to nitrate by wastewater bacteria)?

Answers

(a) NH4+ + 2O2 → NO2- + 2H+ + H2O

(b) NO2- + ½O2 → NO3-

(c) 2NO3- + C4H6O4 → 2N2 + CO2 + 3H2O

(d) To oxidize 1 mg/L of ammonium to nitrate, 4.57 mg/L of dissolved oxygen is required. Therefore, to oxidize 12 mg/L of ammonium, the nitrogenous oxygen demand would be:

12 mg/L x 4.57 mg O2/mg NH4+ = 54.84 mg/L O2

To know more about ammonium to nitrate refer here

https://brainly.com/question/13915102#

#SPJ11

buffer contains 0.290 m of weak acid hy and 0.200 m y−. what is the ph change after 0.0015 mol of ba(oh)2 is added to 0.300 l of this solution?

Answers

The ph change after 0.0015 mol of ba(oh)2 is added to 0.300 l of this solution is 0.1 units.

To solve this problem, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

We can calculate the new concentrations of hy and y- after the addition of 0.0015 mol of [tex]Ba(OH)_2[/tex]. Finally, we can use the Henderson-Hasselbalch equation to calculate the new pH of the solution.

After the addition of[tex]Ba(OH)_2[/tex], the concentration of y- will increase, and the concentration of hy will decrease. The new concentrations are:

[tex][hy] = 0.290 - (0.0015/0.300) = 0.285 M\ and\ [y-] = 0.200 + (0.0015/0.300) = 0.205 M.[/tex]

Plugging these values into the Henderson-Hasselbalch equation, we get a new pH of approximately 7.4. Therefore, the pH change is 0.1 units.

To know more about Henderson-Hasselbalch equation, here

brainly.com/question/13423434

#SPJ4

Other Questions
the constitution was to be considered ratified as soon as it had been approved by nine of the states is...... Prior to embarking on supply chain design, operations managers must first consider:A) what kind of distribution to haveB) "make-or-buy" and outsourcing designsC) how to manage supply chain inventoryD) how to select suppliers modify the address class to only accept two characters for the state. also modify the class so that only five digits can be entered for the postalcode (no less than 5, no more than 5). Suppose the number of years that a computer lasts has density f(x) = { s 8x if x > 2 otherwise. 0 a) Find the probability that the computer lasts between 3 and 5 years. b) Find the probability that the computer lasts at least 4 years. c) Find the probability that the computer lasts less than 1 year. d) Find the probability that the computer lasts exactly 2.48 years. e) Find the expected value of the number of years that the computer lasts. Use the data tab of the graphing tool to display the data from Luthers table in a scatter plot, with x representing the number of pitches thrown and y representing the average speed of the pitches. Select the relationship tab to add the best fit linear function to the graph. What are the equation of the line of best fit and the absolute value of the correlation coefficient?line of best fit: y = x + |correlation coefficient| = f a user's computer becomes infected with malware and used as part of a botnet, which of the following actions can be initiated by the attacker? (Select all that apply.)Launch a Distributed Denial of Service (DDoS) attackLaunch a tailgating attackLaunch a mass-mail spam attackEstablish a connection with a Command and Control server Select the type of mutation that best fits the following description: A mutation moves genes that were found on a chromosome ' to chromosome 18. Translocation Frame shift Missense Nonsense Synonymous Duplication FILL IN THE BLANK most dental practices use ___-minute time units, because they provide maximal flexibility in scheduling, allowing for more productivity. What are the concentration of aluminium and sulfate in a 3.0M solution of aluminum sulfate Which of the following will not have a separate earnings per share calculation and disclosure under GAAP?I. Extraordinary items of the periodII. Discontinued operationsIII. Unrealized G/L on AFS Securities responsive supply chains work best when frequent product introduction exists.T/F Hot exhaust gases are used in shell and tube heat exchanger to heat 2.5 kg/s of water from 35 to 85 C. The gases, assumed to have the properties of air, enter at 200 C and leave at 93 C. The overall heat transfer coefficient is 180 W/m2-K. Using the effectiveness-NTU method, calculate the area of the heat exchanger. (between 37 and 43 m2) Mr. Rokum is comparing the costs for two different electrical providers for his home. Provider A charges $0. 15 per kilowatt-hour. Provider B charges a flat rate of $20 per month plus $0. 10 per kilowatt-hour d) Which amino acid(s) of the peptide are most plausible to be phosphorylated? e) Does the pl increase, decrease, or stay the same if all the possible amino acids you stated in you answer for part (d) from the sequence are phosphorylated? Explain why. Coronaviruses express a nucleocapsid protein that is needed for propagation, transcription, and assembly of the virus. The nucleocapsid protein must be phosphorylated by a kinase in the host cell to carry out these functions. One such kinase that has been recently reported is glycogen synthase kinase 3 or GSK-3. The following is the 10-letter sequence of the nucleocapsid protein that is recognized and phosphorylated by GSK-3: SSRGTSPARM. Note: pK, N-terminus = 9.3; pKa R = 12.5; pK, T = 13; pK, S = 13; pKC-terminus = 4.3 a) What is the sequence of the peptide using the three-letter amino acid abbreviations? b) Draw the chemical structure of the peptide when it is at pH 8. Assign charges and label the peptide bonds. c) What is the pl of the peptide? Do not use an online resource to calculate this value. Show your work to receive credit The client newly diagnosed with Parkinson disease is being discharged. Which instruction is best for the nurse to provide to the client's spouse? what are the four (4) major differences between goods and services? rle schemes often start each row with the number of white pixels, but he chose to start each row with the number of black pixels because most of his graphics start with black pixels. Choose one ad that you've seen recently. Describe the advertisement. What techniquesdoes the ad use to sell the product to you? 2. briefly explain how does it reduce the response time of query processing using b tree (or b tree) in a data base? A virus that kills its host is said to beA) lytic or virulent.B) temperate.C) lysogenic.D) virulent or lysogenic, but not temperate.