how many seconds does it take an object to fall 98m if it start from the rest .(using gravity 10m/s²?
Answer:
Neither.
Explanation:
After 10 seconds the object will have travelled 490.5m, not 98.1. The vertical distance covered in freefall by an object in time t is given by Distance= 1/2 x 9.81 x t^2. Simply multiplying 9.81 by the time will NOT give the distance covered.
The acceleration of the object will not change, it will always be 9.81 m/s^2. Its speed will keep increasing by 9.81 m/s every second, thats what the ‘per second squared*’ means. The speed after 10 seconds will be 98.1 m/s
To summarise, after 10 seconds, the object will have covered 490.5 metres, and it will have a final speed of 98.1 m/s. It’s acceleration will remain 9.81 m/s^2 at all times
Help help fast please first answer gets brainiest also needs to be clearly stated
consider the hypothetical observation irregular galaxies outside the local group are moving toward us. from part a, this observation would contradict the idea of an expanding universe. why?
Answer:
spiral galaxies move away from us 10% faster than elliptical galaxies at the same distances; irregular galaxies outside the Local Group are moving toward us; galaxy speeds are faster in summer than in winter
Explanation:
This may help I'm not sure.
how much force is required to accelerate a 12 kg mass at 5 m/s 2
Answer:
60 N
Explanation:
This is just Newton's Second Law
F = m*a
F = ?
m = 12 kg
a = 5 m/^2
F = 5*12 = 60 Newtons
Estimate under what set of conditions it is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment.
When the experimental measurements diverge at very low values of the voltages. When the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100. When there is a finite current at Voltage
V = 0
Diffusion will have influence on current - voltage curve in the working electrode which is ionization detector.
The estimation under set of conditions that is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment will be:
When the experimental measurements diverge at very low values of the voltageswhen the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100When there is a finite current at Voltage V = 0Where
i = electric current
I = saturated current
V = voltage supplied
The curve expected will therefore give exponential curve from positive to negative domain because of the diffusion of ions from different directions
Learn more here: https://brainly.com/question/23985719
The ______ of Saturn vary in thickness and are composed of icy chunks ranging in size from sand to boulders (and even larger).
Answer:
"rings" - viewed from a distance, Saturn appears to be surrounded by rings
What symbols are these?
Answer:
the bottom one is wollsiegel
How to solve projectile motion problems with angles.
Answer:
R=v2isin2Big R
=v I 2 sin 2 B I g
NO LINKS! What are the definitions of initial horizontal velocity and initial vertical velocity? Please help! This like is my 10th time asking this question because many people have been scamming me.
Explanation:
Initial horizontal velocity
If a projectile is launched at an angle to the horizontal, then the initial velocity of the projectile has both a horizontal and a vertical component. The horizontal velocity component (vx) describes the influence of the velocity in displacing the projectile horizontally.
The initial horizontal velocity can also be determined by measuring the diameter d of the ball and dividing by the time t that it takes for the ball to move across the photogate. That is Vo = d/t.
Initial vertical velocity
Vertical velocity refers to the speed of an object's movement in a vertical direction.The initial vertical velocity is the vertical component of the initial velocity: v 0 y = v 0 sin θ 0 = ( 30.0 m / s ) sin 45 ° = 21.2 m / s .
when a mechanical wave travels through a medium, how does the wave affect the medium's particles?
thanks ;w;
Answer:
PLEASE MAARK ME BRAINLEST!!!
Explanation:
The particles of the medium just vibrate in place. As they vibrate, they pass the energy of the disturbance to the particles next to them, which pass the energy to the particles next to them, and so on.
A two-dimensional crystal has a rectangular unit cell, with spacings between the centers of the atoms of 0.5 nm in one direction (e.g., the x direction), and 0.4 nm in the other direction (e.g., the y direction). Presuming that the crystal has 1000 unit cells in each direction, sketch a representative portion of the reciprocal lattice on a scale drawing, showing the dimensions, units, and directions (i.e., kx and ky)
So directly the cell density value in a rectangle is:
[tex]5*10^{17} cells/cm^{2}[/tex]
In this exercise, we must first calculate the area of the rectangle, remembering that you need to convert from nm to cm is:
[tex]A=B*H\\A=(0.4*10^{-7})*(0.5*10^{-7})= 2*10^{-15}[/tex]
Next, let's calculate the density from the calculated area:
[tex]\frac{N}{A} = \frac{1000}{2*10^{-15} } = 5*10^{17}[/tex]
In this way, the calculation represents that there is:
[tex]5*10^{17} cells/cm^{2}[/tex]
Learn more: brainly.com/question/18320053
what characteristic of liquids makes them pourbale
Liquids are pourable because they do not maintain a "solid" structure as solids do, but still have structure, unlike gasses. Why is this? The forces between liquid particles are weaker than the forces between solid particles. The particles are further apart and move around more easily.
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Lacie kicks a football from ground level at a velocity of 13.9 m/s and at an angle of 25.0° to the ground. You have determined that the football would travel 15.1 m before landing.
How would this value change if the football was kicked at an angle of 35.0°?Complete all equations without rounding and then round to the nearest tenth at the end.
From edge
Answer:
like 23 or something
Explanation:
How does the radius of a string affect centripetal force.
Answer:
because a raduis is half of 25% of a cicrle.
Explanation:
A crane lifts a 10000 N load through a distance of 30mins in 40s calculate work done
Given,
Force = 10,000 N
Distance = 30 m
Time = 40 s
Work done = force × distance
Work = 10,000 × 30
Work = 300,000 J
______
꧁✿ ᴿᴬᴵᴺᴮᴼᵂˢᴬᴸᵀ2222 ✬꧂
The work done on the object is equal to the power it experiences which is equal to 735 watts.
What is work done?Work done is defined as the product of force applied and the distance over which the force is applied on the object. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.
The time rate of doing work is called as power, which is designated by the symbol P. It is measured in the units of watts, where one watt is equal to one joule energy applied per second time.
Work done on an object is equal to the force (F) multiplied by the distance d in the direction of the force. Where, time interval is Δt.
P = W/Δt = F × d/Δt = m × g × h/Δt = 100 × 9.8 × 30 / 40
Power = 735 watts
The power of the object is 735 watts.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ2
A transformer is being built to triple the voltage produced. Which data are collected to investigate whether the transformer can achieve the goal? (1 point)
A) the ratio of the number of turns in the primary and secondary coils
B) only the number of turns in the secondary coil and the magnetic field of the core
C) only the number of turns in the primary coil and the magnetic field of the core
D) the ratio of the number of turns in the primary and secondary coils and the magnetic field of the core
Answer:
the ratio of the number of turns in the primary and secondary coils.
Explanation:
hope i'm not too late!!
An example of a conversation killer is?
making eye contact.
encouraging another person
talking about others
sharing your ideas and feelings
Answer: talking about others
What happens when a red blood cell takes in helium
Answer:
It can cause death by asphyxiation in minutes or a gas/air embolism. This can cause the blood vessels to rupture and cause hemorrhage
Explanation:
Inhaling helium from a pure helium pressurized tank can cause something called an 'air embolism'. This is eventually a bubble that was trapped in a blood vessel, and therefor blocks it. The blood vessels can then rupture and hemorrhage.
Short answer: The results of breathing in 100% pure helium is asphyxiation, which eventually causes death.
I hope this helps! (If this was a question which had multiple choice answers, feel free to post them in the comment section and I would be more than happy to give you a direct answer to the test.)
6. Explain the importance of the law of conservation of mass.
Answer:
According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants. The law of conservation of mass is useful for a number of calculations and can be used to solve for unknown masses, such the amount of gas consumed or produced during a reaction.
Explanation:
<3
If a powerful gravitational wave passed through you body, moving from your back to your chest, what would happen to your body
Answer:
If a powerful gravitational wave passed through you body, moving from your back to your chest, what would happen to your body? Your width and height would both oscillate in such a way that you would get taller as you got narrower and shorter as you got wider.
Explanation:
Of the Three elements listed, which element is NOT present in the mixture?
Element D
Element A
Element Z
Answer:
element ammmkkkv was a very good
A particular roller coaster has a mass of 3500 kg, a height of 4.0 m, and a velocity of 12 m/s. What is the kinetic energy? If needed, use g= 10. m/s^2
Explanation:
given
m=3500kg,h=4.0m,v=12m/s
ke=½mv²
½×3500×12²=3500×144÷2
=252,000j or 252j
The c-c sigma bond in acetylene is formed by the overlap of which two orbitals.
Answer:When carbon atom tends to form single bonds then its hybridization is , when carbon atom tends to form double bond then its hybridization is and when a carbon atom is attached to a triple bond or with two double bonds then its hydridization is sp.
For example, in HCN molecule there is a triple existing between the carbon and nitrogen atom.
So, hybridization of carbon in this molecules is sp. Moreover, nitrogen atom is also attached via triple bond and it also has a lone pair of electrons. Hence, the hybridization of nitrogen atom is also sp.
Thus, we can conclude that s and p type of orbitals overlap to form the sigma bond between C and N in H−C≡N:
Explanation:
The right to gather to advance some political or social cause is known as
Answer:
the first amendment
Explanation:
the first amendment to the United States constitution allows the freedoms concerning religion, expression, assembly, and the right to gather and petition.
A girl pushes her little brother on his sled with a force of 300 N for 750 m.
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
Question 1 of 11
The book has a mass of 2.5 kg.
What net force must act on the book to make it accelerate to the left at a rate
of 7.0 m/s2? (Hint: Use F = ma.)
O A. F = 17.5 N right
OB. F = 2.8 N right
O C. F = 2.8 N left
O D. F = 17.5 N left
Answer:
D. F= 17.5 N left
Explanation:
I just took the quiz and got it correct!
the free body diagram shown above is for a 5 kg box on a rough surface being pulled to the right at a constant speed by a string that is at an angle of 30° above the horizontal. the coefficient of kinetic friction between the box and the surface is 0.30. the tension in this string is most nearly:
The tension in the string pulling the box is most nearly 17 N.
The given parameters;
mass of the box, m = 5 kginclination of the string, θ = 30°coefficient of kinetic friction, μ = 0.3The tension on the string is calculated by applying Newton's second law of motion as follows.
[tex]\Sigma F = ma[/tex]
at constant speed, acceleration, a, = 0
[tex]\Sigma F = 0\\\\T_x - \mu F_n = 0\\\\Tcos(\theta) - \mu F_n = 0\\\\Tcos(\theta)= \mu F_n\\\\T = \frac{\mu F_n}{cos(\theta)} \\\\T = \frac{0.3 \times 5 \times 9.8}{cos(30)} \\\\T = 16.97 \ N\\\\T \approx 17 \ N[/tex]
Thus, the tension in the string pulling the box is most nearly 17 N.
Learn more here:https://brainly.com/question/21040480
An irregularly shaped stone was lowered into a graduated cylinder holding a volume of water equal to 20L. The height of water rose to 30.2mL. If the mass of the stone was 25g what was its density?
Answer:
2.45 g/mL
Explanation:
(assuming that the original volume was 20 mL and not L)
Since you know the amount of water in the cylinder before and after you placed the rock in, you can subtract them to get the volume of the rock itself. [tex]30.2-20=10.2[/tex] mL.
To get the rock's density, use the equation [tex]d=\frac{m}{v}[/tex], where m is mass and v is volume.
[tex]d=\frac{25 g}{10.2mL}\\\\d=2.45 g/mL[/tex]
What does negative acceleration mean.
please help I'm stuck on this question
Answer:
increase
decrease
Explanation:
using formula
Vt=mg/6πηr
so if m increases V increases
r is the denominator so if r increases V decreases