given : 25, : 25, and p. do you reject or fail to reject at the 0.01 level of significance?

Based on the change in momentum of the bowling ball, the force the pillow exerts on the bowling ball to stop it is 12.15 N.

The force the pillow exerts on the bowling ball to stop it is calculated as follows:

Force * time = change in momentum

F * t = mv - mu

where;

F is stopping force

t is the stopping time = 0.67 seconds

m is the mass of the ball = 3.7 kg

v is the initial velocity of the ball = 2.2 m/s

u is the final velocity = 0 m/s

F = m(v - u)/t

F = 3.7(0 - 2.2)/0.67

F = -12.15 N

Learn more about force and momentum at: https://brainly.com/question/29268524
#SPJ1

Complete question:

A bowling ball of mass 3.7 kg is rolled down the lane with a velocity of 2.2 m/s. Further down the lane, the bowling ball from problem 3 gets stopped by a pillow in a total of 0.67 seconds. What force did the pillow exert on the bowling ball to bring it to rest?

The speed of an object at the bottom of a vertical drop is calculated to be 24.3 m/s.

The speed of an object at the bottom of a vertical drop can be determined using the equation of motion,

v = √(2gh), where

v is the final velocity (speed),

g is acceleration due to gravity (9.8 m/s²), and

h is the height of the drop (30.0 m).

Plugging in the values, we get,

v = √(2 × 9.8 × 30)

v = √(588)

v ≈ 24.3 m/s

So, the speed of the car at the bottom of the drop is approximately 24.3 m/s.

To know more about speed:

https://brainly.com/question/30465884

#SPJ4

[tex]F = ma[/tex], or force is equal to mass times acceleration, is the second of Newton's second laws of motion, discovering the acceleration calculation formula.

Newton's second law provides a precise explanation of the adjustments that a force can make to a body's motion. According to this law, a body's momentum changes at a rate that is proportional to the force acting on it, both in magnitude and direction.

According to Newton's Second Law of Motion, when a force applies on a mass, the mass accelerates (gains speed) (object). A nice illustration of this rule of motion in action is while you are riding your bicycle. Your bicycle makes up the mass. The force is generated by your leg muscles pressing against the bicycle pedals. One more illustration is pulling a cart. In a grocery store, an empty cart is simpler to maneuver than one that is filled, and heavier loads need for greater acceleration.

Learn more about Newton's second law of motion here https://brainly.com/question/13447525

#SPJ4

The sinusoidal curve of the downstroke of a piston is different from the upstroke because the downstroke is powered by the pressure of the combustion chamber, while the upstroke is powered by the spring force of the valve.

This means that the downstroke will have a higher peak pressure than the upstroke, resulting in a sinusoidal curve with a larger amplitude. Additionally, the downstroke will have a faster acceleration than the upstroke due to the higher pressure in the combustion chamber, resulting in a steeper slope in the sinusoidal curve.

To know more about pressure please refer:

https://brainly.com/question/29341536

#SPJ4

The total force of the atmosphere on a 6x8 inch rubber square at sea level is approximately 14.7 pounds, due to atmospheric pressure.

The total force of the atmosphere on a 6x8 inch rubber square at sea level is due to atmospheric pressure, which is caused by the weight of the air above it. The standard atmospheric pressure at sea level is 14.7 pounds per square inch (psi).

So, the total force on the rubber square would be 6 x 8 x 14.7 = 705.6 pounds. It's important to note that atmospheric pressure can vary depending on altitude, temperature, and other factors, but at sea level it is commonly taken to be 14.7 psi.

Additionally, the smooth and thin nature of the rubber square means that it will be affected very little by surface tension or other forces, so the pressure alone will be the dominant force acting on it.

To know more about  atmospheric pressure click on the link below:

https://brainly.com/question/28310375#

#SPJ11

In the "Properties" tab, solid, liquid, and gas states are differentiated based on the physical state of the element at room temperature, 298K.

The "Properties" tab in the temperature conversion tool provides information on the physical state of elements at a specific temperature. By default, the temperature is set to room temperature, 298K.

At this temperature, elements can be in a solid, liquid, or gas state, depending on their physical properties. In the "Properties" tab, the physical state of each element is indicated with a corresponding icon or symbol, such as a snowflake for solid, a droplet for liquid, or a cloud for gas.

This view allows users to quickly determine the physical state of an element at room temperature and provides valuable information for various applications, such as chemical reactions, phase changes, and material science.

By selecting a different temperature, users can also observe how the physical state of an element changes with temperature, providing insights into the behavior of materials and the effects of temperature on their properties.

To know more about   physical properties click on the link below:

https://brainly.com/question/18327661#

#SPJ11

The answer is option B. A graph with skewness -1.8 would be highly skewed to the left.

Skewness- it is a measure of asymmetry in a distribution. Asymmetry in a distribution is when the left and right sides are not mirror images of each other. A distribution can be positively skewed, negatively skewed or have zero skewness.

The left tail of a histogram contains the lower values whereas the right tail of histogram contains the higher values. In skewed left histogram, the left tail is longer than the right tail. The observations in a skewed left histogram, the observations are either medium or large.

Learn more about skewness here brainly.com/question/12812772

#SPJ4

Solutions are mixtures where the solute is evenly distributed throughout the solvent. Examples of solutions in daily life include mouthwash, vinegar, rubbing alcohol, tea, and table salt in water.

A solution is a sort of mixture in which a solute and a solvent are dissolved into one another to create a homogenous combination. The solute is that which dissolves, whereas the solvent is that which causes the solute to dissolve. For instance, table salt is a typical solute that can be dissolved in water to create a saltwater solution. In a similar way, vinegar is an acetic acid and water solution. Tea is a mixture of several chemicals, whereas rubbing alcohol is an isopropyl alcohol in water solution.

Learn more about Rubbing alcohol here:

https://brainly.com/question/14344278

#SPJ4

Electrically, potassium is configured as [Ne] 3s2 3p6 4s1. One electron will be removed from the fourth subshell of the outermost shell, or 4s, to produce a +1 cation.

Potassium is an element with the chemical symbol K and atomic number 19. (which stands for kalium in Neo-Latin).Potassium has an electron structure of 1s 2 2s 2 2p 6 3s 2 3p 6 4s in its ground state. This electron configuration demonstrates that the potassium atom's final shell contains an unpaired electron. One electron of potassium (Z=19) is located in the 4s subshell.Therefore, potassium has a valency of 1. In response to energy stimulation, potassium atom absorb energy. An important cation is potassium (k+).

learn more about atom Refer:brainly.com/question/11166120

#SPJ4

The coaster's maximum height will be equal to the height at point A. The conservation of energy principle asserts that a system's total mechanical energy is preserved.

if no non-conservative forces operate on it. The frictionless roller coaster in this context is a system with only conservative forces operating on it. As a result, when the coaster lands on the ramp, the initial potential energy at point A equals the end potential energy.The coaster's maximum height will be equal to the height at point A. The conservation of energy principle asserts that a system's total mechanical energy is preserved.  At the coaster's greatest height, the potential energy is maximal and the kinetic energy is zero. Because the system's entire mechanical energy is preserved, the potential energy at the greatest height is equal to the starting potential energy at the start.

learn more about energy  here:

https://brainly.com/question/1932868

#SPJ4

The minimum surface charge density for producing a spark is 0.0000354.

We consider the tip of a metal to have a negligible surface area and in Metals, due to repulsion the charges try to be at the maximum possible distance and hence accumulate at the surface of the tip.

We know Field strength at the surface of tip

[tex]E= \frac{charge density on tip}{∈)}[/tex]

E=  4.00×106N/C

∈ = 8.85*10-12

minimum charge density to get a spark = E x  ∈

                                                               = 0 .0000354

To learn more about  Field strength

brainly.com/question/14486469

#SPJ4

A transition in the Balmer series for hydrogen has an observed wavelength of 434 nm. This transition is from the n=5 energy level to the n=2 energy level.

Transitions in the Balmer series all terminate in n=2, which is the lowest energy level of the hydrogen atom.

The four Balmer lines (Hα, Hβ, Hγ, and Hδ) are typically the brightest in the visible spectrum and are observed in the emission spectra of many elements. The Rydberg equation can be used to calculate the wavelength of the Balmer series lines:

\lambda = R \Big(\dfrac{1}{m^2}-\dfrac{1}{n^2}\Big)

Where R is the Rydberg constant (1.097 x 10-2 nm-1), m is the lower energy level (n=2), and n is the upper energy level (n>2). In the case of the 434 nm Balmer line, the transition is from n=5 to n=2, so the equation would be:

\lambda = 1.097 x 10-2 \Big(\dfrac{1}{2^2}-\dfrac{1}{5^2}\Big) = 4.34 x 10-2 nm

Since the wavelength of the Balmer line is 434 nm, the transition is from n=5 to n=2, as expected.

Learn more about the balmer series:

https://brainly.com/question/14767916

#SPJ4

The Pythagorean theorem may be used to calculate the size of the resultant force given two forces, f1 = 300 N and f2 = 460 N. R = √(f1^2 + f2^2) When we plug in the values.

we get: R = √(300^2 + 460^2) R = √(90000 + 211600) R = √(301600) R ≈ 550 N As a result, the resulting force is 550 N to three significant digits.  the magnitude of the resultant force if f1 = 300 n and f2 = 460 n . express your answer to three significant figures and include the appropriate units.The Pythagorean theorem may be used to calculate the size of the resultant force given two forces, f1 = 300 N and f2 = 460 N. R = √(f1^2 + f2^2) When we plug in the values.we get: R = √(300^2 + 460^2) R = √(90000 + 211600) R = √(301600) R ≈ 550 N As a result, the resulting force is 550 N to three significant digits.  the magnitude.

learn more about magnitude  here:

https://brainly.com/question/14452091

#SPJ4

The movement of a positive charge particle all along electric field, either from greater potential to lower potential. That is a drop in the charge's electric potential energy.

Potential energy being a form of battery bank that depends on how various system elements interact with one another. A spring's potential energy rises when it is crushed or stretched. Potential energy is something that is not transformed to kinetic energy.

Everything with mass naturally possesses potential energy, which is a product of matter. But an elastomeric or gravitation force is needed to add energy potential into the substance. Without forces, gravitational potential wouldn't exist.

To know more about potential energy visit:

https://brainly.com/question/11791883

#SPJ4

The required wavelength for the photon necessary to induce the given transition is calculated to be 5.163 × 10⁻³¹ m.

The energy difference between the ground state and an excited electronic state is 3.85 × 10⁵ j/mol.

ΔE = 3.85 × 10⁵ j/mol

We know that,

Planck's constant h = 6.626 × 10⁻³⁴ Js

Speed of light c = 3 × 10⁸ m/s

The formula for ΔE is known as, ΔE = E₂ - E₁ = h c/λ

where, λ is the wavelength

Making λ as subject in the above formula, we have,

ΔE = h c/λ

λ = h c/ΔE

λ = (6.626 × 10⁻³⁴ × 3 × 10⁸)/(3.85 × 10⁵) = 5.163 × 10⁻³¹ m

To know more about wavelength:

https://brainly.com/question/2094945

#SPJ4

To convert from meters per second (m/s) to miles per hour (mi/hr), the conversion factors needed are:

B. 60 minutes = 1 hour

F. 1 km = 0.6214 miles

First, the velocity in m/s needs to be converted to km/hr, then to mi/hr.

Convert m/s to km/hr :

3.00 x 10⁸ m/s * (1 hr/3600 s) * (1 km/1000 m) = 83333.33 km/hr

Convert km/hr to mi/hr:

83333.33 km/hr * 0.6214 mi/km = 51667.07 mi/hr

Velocity is a physical quantity that describes the rate of change of an object's position with respect to time. It is a vector quantity that has both magnitude and direction. The magnitude of velocity is the speed of an object, while the direction of velocity indicates the direction of an object's motion. The unit of velocity is typically meters per second (m/s) or miles per hour (mi/hr).

To know more about velocity, visit:

https://brainly.com/question/28738284

#SPJ4

A meteor that lands on earth. they are usually rock, but occasionally they are made of iron or nickel called a meteorite.

A meteorite is a solid piece of debris from an object that starts in space, such as a comet, asteroid, or meteoroid, and survives its passage through the atmosphere to reach the surface of a planet or moon.

A meteorite is any relatively tiny natural object from interplanetary space that survives its passage through Earth's atmosphere and settles on the surface. In current usage, the phrase refers to comparable things that settle on the surface of other, larger entities.

Meteorites have a high monetary worth to collectors and a high scientific value to researchers. The value of a meteorite can range from a few dollars to hundreds of thousands of dollars.

For more questions on meteorite

https://brainly.com/question/7993266

#SPJ4

Explanation:

If Earth did not rotate or revolve, there would be no day or night, and no seasons. The lack of tilt would result in a constant and uniform distribution of sunlight, leading to a lack of temperature variation and climatic zones.

It's possible that life could still exist in such conditions, but it would likely be limited to areas with constant access to sunlight and warm temperatures. The absence of climatic zones would also lead to a lack of diversity in species, as many would not be able to adapt to the uniform conditions.

It's not possible to say where one would want to live in such conditions, as the lack of variation would make the entire planet similar in terms of climate and habitat.

If the cells are left at room temperature after lysing and adding ONPG, the reaction between ONPG and the remaining active beta-galactosidase in the lysed cells may proceed too slowly or not at all, leading to inaccurate results.

The reaction between ONPG and beta-galactosidase is an exothermic reaction and is temperature dependent, meaning that it proceeds more rapidly at higher temperatures.

Placing the lysed cells back in the water bath after lysing and adding ONPG ensures that the reaction is taking place at a consistent temperature, allowing for accurate and reproducible results.

Leaving the cells at room temperature may result in variations in reaction rate, leading to inconsistencies in the data. To ensure accurate results, it is important to control the temperature during the reaction.

To know more about  exothermic reaction  click on the link below:

https://brainly.com/question/10373907#

#SPJ11

Their wavelengths for an FM radio frequency of 88 MHz is 34.1 cm and for a frequency of 108 MHz 27.8 cm.

The wavelength of an electromagnetic wave is inversely proportional to its frequency. So, the higher the frequency, the shorter the wavelength.

what is The formula to calculate the wavelength (λ) of an electromagnetic wave is ?

λ = c / f

where c is the speed of light (3 x 10^8 meters per second) and f is the frequency in hertz.

So, for an FM radio frequency of 88 MHz, the wavelength can be calculated as follows:

λ = c / f = 3 x 10^8 / 88 x 10^6 = 0.0341 meters = 34.1 cm

And for a frequency of 108 MHz:

λ = c / f = 3 x 10^8 / 108 x 10^6 = 0.0278 meters = 27.8 cm

These are the approximate wavelengths for FM radio frequencies in the range of 88 MHz to 108 MHz.

To learn more about wavelength follow the given link: https://brainly.com/question/29790283

#SPJ4

An alarm clock and a blinding light are under a glass jar that is filled with air. you can see the light and hear the alarm. If all the air is removed from the jar by the vacuum pump the sound about an alarm clock cannot be heard at all.

Draining the air out of a plastic bottle gradually will lower the sound's volume. Since sound cannot travel in a vacuum, the sound of an alarm clock cannot be heard at all.

When air is carefully removed out of the vicinity and a glass jar is placed underneath it, an alarm clock will gradually get quieter. This is true because sound is a mechanical wave that propagates through a medium.

The air molecules in the jar vibrate as sound waves pass through them, which allows us to hear the sound. When air is removed, there are fewer air particles available to vibrate and transmit sound waves, which weakens the sound.

Due to the virtually complete elimination of the air, there won't be much of it left to vibrate, therefore the sound will be essentially imperceptible.

To know more about vacuum :

brainly.com/question/29242274

#SPJ1

The observed speed of the ball can be calculated by dividing the distance it moves by the time it takes to move that distance. Using the given measurements, we have:

Speed = Distance / Time = 33.3 cm / 16.35 s = 2.037 cm/s

The most probable uncertainty in this calculation can be estimated by propagating the uncertainties in the measurement of distance and time. Using standard error propagation techniques, we get:

Uncertainty = sqrt( (0.1/33.3)^2 + (0.04/16.35)^2 ) * 2.037 = 0.008 cm/s

So, the best estimate for the observed speed of the ball is (2.037 ± 0.008) cm/s.

This answer corresponds to option D.

To Learn More About measurement click

https://brainly.com/question/4725561

#SPJ4

"The diode model which includes the large reverse resistance is the complete model."

The barrier potential, the modest forward dynamic resistance, and the huge internal reverse resistance make up the entire concept of a diode. Because it provides a pathway for the reverse current, which is taken into account in this diode model, the reverse resistance is taken into consideration.

The complete diode model is the most accurate approximation and includes the barrier potential, the small forward dynamic resistance and the large internal reverse resistance.

The diode functions as a closed switch when it is forward-biased.

In parallel with the substantial internal reverse resistance, the diode functions as an open switch when it is reverse-biased.

To know more about diodes:

https://brainly.com/question/28498991

#SPJ4

20Km/h is  the velocity of B with respect to A.

What is meant by relative velocity?

The velocity of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's relative location changes in relation to another object over time.

Only possible to quantify with our current knowledge and technology is the relative velocity of an object. The pace at which an object's position changes over time in relation to its absolute spatial coordinates is known as absolute velocity. Any frame of reference is irrelevant to absolute velocity.

Va is 40Km/h

Vb is 60 Km/h

Vba will be Vb - Va i.e. 60-40 Km/h

Vba is 20Km/h

To learn more about relative velocity use link below:

https://brainly.com/question/17228388

#SPJ4

The large intestine contains large pouch like structures called haustra. Haustra are sections of the large intestine that are separated by bands of muscle called taeniae coli.

These bands of muscle contract and relax, creating the haustra which help to move material through the large intestine. Haustra are large pouch-like projections found in the large intestine, also known as the colon. These haustra serve to increase the surface area of the colon, allowing for greater absorption of water and electrolytes from the remaining food matter. Additionally, the haustra can also help to mix and move the contents of the colon, promoting the elimination of waste from the body. The haustra are a characteristic feature of the large intestine, and their presence helps to distinguish it from the small intestine, which does not have these pouch-like projections.

To know more about intestine please refer: https://brainly.com/question/1751875

#SPJ4

The correct option is (a)Tragus. The wedge-shaped prominence that projects from the cheek over the ear passage for protection is commonly referred to as the Tragus.

It is located at the opening of the ear canal and helps to protect the ear from external damage and debris. The tragus is a small, fleshy structure with a rounded or pointed tip that can be felt when pressing on the ear. It plays an important role in hearing as it helps to direct sound into the ear canal, and it is also a common site for ear piercings. One of the main functions of the tragus is to protect the ear from external damage and debris. It acts as a barrier, helping to prevent foreign objects from entering the ear canal and potentially causing harm. This is especially important given the delicate and sensitive nature of the structures within the ear, including the eardrum and delicate bones of the middle ear. In addition to its protective function, the tragus also plays an important role in hearing. By directing sound into the ear canal, the tragus helps to improve the quality of sound that is received by the ear. This improved sound quality can result in better hearing and a clearer perception of the sounds around us. Finally, the tragus is a common site for ear piercings. Given its fleshy nature and relatively prominent position, it is an ideal location for piercing and can provide a visually appealing accent to the ear. There are many different styles and types of jewelry that can be used with a tragus piercing, allowing individuals to express their unique sense of style.

The complete question is:

The wedge shaped prominence that projects from the cheek over the ear passage fro protection is identified as the:

(a)Tragus

(b)Antihelix

(c) Helix

(d) Concha

Learn more about tragus here :

https://brainly.com/question/15498565

#SPJ4

The answer is high susceptibility;  low retentivity. Iron is good for creating solenoids because its high susceptibility and low retentivity allow it to be magnetized and demagnetized quickly.

Its high compliance and low iron retention make it a good choice for making magnetic coils. These properties make iron easier to magnetize and demagnetize, making it an ideal material for making magnetic circuits and other magnetically sensitive devices.

Iron magnetizes faster, but loses its magnetism once the inductor magnet is removed. For example, soft iron should have high flexibility but low retention. This property of soft iron is very useful for making temporary electromagnets, where we need strong but temporary magnets.

To know more about Solenoids:

brainly.com/question/1873362

#SPJ4

The required radius of the sphere when density and mass of sphere are given is calculated to be 10.73 cm.

The mass of gold is given as 100 kg = 10⁵ g

Density of gold is given as 19.3 g/cm³.

Radius of the sphere = ?

We know the expression for density of gold as,

Density = mass of sphere/volume of sphere

Volume of sphere v = 4/3 π r³

Putting the values into the above equation, we have,

D = m/v

19.3 = 10⁵/(4/3 π r³)

4/3 π r³ = 10⁵/19.3

r³ = 10⁵/19.3 × 3/4π = 1236.95 cm³

r = (1237)^(1/3) cm = 10.73 cm

To know more about density:

https://brainly.com/question/5114842

#SPJ4

A solution contains 25.0 g of nano3 per 110.0 g of solution, then the concentration in ppm is 0.5 ppm.

Concentration in parts per million (ppm) indicates how many parts of solute are in 1,000,000 parts of solution. For example, saline is a dilute aqueous solution of sodium chloride NaCl(aq) with a concentration of 9,000 ppm.

The key point of PPM is to indicate how many "units" of substance A are for every million total units of solution or mixture. Percentages, in contrast, are very similar measures to PPMs, as they tell you how much there is "out of 100". Just like we can say we have a 7% solution, we can say we have a 36 PPM solution.

The most important thing to remember when performing PPM calculations is that the units you choose for the solution and the units of the substance of interest must be the same. For example, you cannot use solute mass and total solution volume. To get reasonable results, you should use mass and mass or volume.

It is the ratio of the number of grams of solute for every one million grams of solution

Therefore,

ppm = gram of solution/ grams of solute ×10⁶

= 5.0×10⁻⁵/100  ×10⁶

=0.5 ppm

Learn more about Concentration in PPM:

https://brainly.com/question/24491982

#SPJ4

The magnitude of the vector is [tex]44.20 units[/tex]

The direction of the vector is [tex]-56.34 deg[/tex]

Magnitude is simply "distance or quantity" in physics. It illustrates the absolute or relative size, direction, or motion of an object. It is employed to describe something's size or range. Magnitude in physics typically describes a size or quantity.

"How much of a quantity" is how the word "magnitude" is defined. The magnitude, for instance, can be used to explain a comparison of the speeds of a car and a bicycle. Additionally, it can be used to describe how far an object has travelled or how much of an object is represented by its magnitude.

let A = [tex]A_x i+A_y j[/tex]  is a vector.

x-component of the vector A is [tex]A_x =-24.5 i[/tex]

y-component of the vector A is [tex]A_y =32.8 j[/tex]

[tex]44.20 units[/tex][tex]44.20 units[/tex]

Magnitude of the vector A is

A = [tex]\sqrt(-24.5)^2+(36.2)^2[/tex]

  = [tex]43.71[/tex]

Direction θ = [tex]tan^-1(A_y/A_x)[/tex]

                  = [tex](36.8/-24.5)[/tex]

                 = [tex]-56.34 deg[/tex]

To learn more about Magnitude click the given link,

https://brainly.com/question/14452091

#SPJ4