give me a fully balanced equation of lead monoxide and nitric acid​

Answer:

The conditions for the formation of an electrovalent bond are as follows: The atom which changes into cation (+ ive ion) should possess 1,2 or 3 valency electrons. It will loose these electrons to form cation with +1,+2 or +3 charge

Answer:

0.535 atm

Explanation:

Since the volume of the tank is constant, we use Gay- Lussac's law to find the pressure at 180°C.

So, P₁/T₁ = P₂/T₂ where P₁ = pressure at S.T.P = 1 atm, T₁ = temperature at S.T.P = 273.15 K, P₂ = pressure of gas at 180 °C and T₂ = 180 °C = 273.15 + 180 K = 453.15 K

So, P₁/T₁ = P₂/T₂

P₂ = P₁T₂/T₁

Substituting the values of the variables into the equation, we have

P₂ = P₁T₂/T₁

P₂ = 1 atm × 453.15 K/273.15 K

P₂ = 1 atm × 1.66

P₂ = 1.66 atm

We now need to find the total number of moles of each gas present

number of moles of nitrogen = mass of nitrogen, m/molar mass of nitrogen molecule M

n = m/M

m = 2.5 g and M = 2 × atomic mass of nitrogen (since it is diatomic) = 2 × 14 g/mol = 28 g/mol

So, n = 2.5 g/28 g/mol

n = 0.089 mol

number of moles of chlorine, n' = mass of chlorine, m'/molar mass of chlorine molecule M'

n' = m'/M'

m' = 13.3 g and M = 2 × atomic mass of chlorine (since it is diatomic) = 2 × 35.5 g/mol = 71 g/mol

So, n' = 13.3 g/71 g/mol

n' = 0.187 mol

So, the total number of moles of gas present is n" = n + n' = 0.089 mol + 0.187 mol = 0.276 mol

So, the partial pressure due to nitrogen gas, P = mole fraction of nitrogen × pressure of gas at 180 °C

P = n/n" × P₂

P = 0.089 mol/0.276 mol × 1.66 atm

P = 0.322 × 1.66 atm

P = 0.535 atm

Answer:

[tex] moles = \frac{ number \: of \: particles}{6.02 \times {10}^{23} } [/tex]

=1.806×10^22/6.02×10^23

=0.03 moles

hope this helps :)

Answer:

Chemical potential energy being converted to kinetic energy

Explanation:

Answer:

Heat is absorbed.

Explanation:

Endothermic reactions: Heat is absorbed.

When there is a change in the endothermic chemical so here heat is absorbed.

It is the type of the chemical reaction that absorbed the heat from the environment. The absorbed energy that gives the activation energy for the reaction to arise.

hence, When there is a change in the endothermic chemical so here heat is absorbed.

Therefore, the first option is correct.

Learn more about heat here: https://brainly.com/question/1488118

Answer: The molecular weight of the dibasic acid is 89.6 g/mol

Explanation:

Normality is defined as the amount of solute expressed in the number of gram equivalents present per liter of solution. The units of normality are eq/L. The formula used to calculate normality:

[tex]\text{Normality}=\frac{\text{Given mass of solute}\times 1000}{\text{Equivalent mass of solute}\times \text{Volume of solution (mL)}}[/tex]      ....(1)

We are given:

Normality of solution = [tex]\frac{1}{20}=0.05N[/tex]

Given mass of solute = 0.56 g

Volume of solution = 250 mL

Putting values in equation 1, we get:

[tex]0.05=\frac{0.56\times 1000}{\text{Equivalent mass of solute}\times 250}\\\\\text{Equivalent mass of solute}=\frac{0.56\times 1000}{0.05\times 250}=44.8g/eq[/tex]

Equivalent weight of an acid is calculated by using the equation:

[tex]\text{Equivalent weight}=\frac{\text{Molar mass}}{\text{Basicity}}[/tex]   .....(2)

Equivalent weight of acid = 44.8 g/eq

Basicity of an acid = 2 eq/mol

Putting values in equation 2, we get:

[tex]44.8g/eq=\frac{\text{Molar mass}}{2eq/mol}\\\\\text{Molar mass}=(44.8g/eq\times 2eq/mol)=89.6g/mol[/tex]

Hence, the molecular weight of the dibasic acid is 89.6 g/mol

Answer:g

Explanation:

Answer:

ouch......it's kinda a practical question..

Answer: ?

Explanation: what was the answer?

Answer:

In complete combustion, there is a sufficient supply of oxygen which is able to react with the burning hydrocarbon allowing the reaction products H2O and CO2 to be formed. In incomplete combustion there is a lack of oxygen so when heat is applied carbon monoxide is released.

I hope this will help you......

Answer:

Inference

Explanation:

I mean, it's not difficult.

A theory is an unproven explanation.

An inference is a guess/educated guess where you don't have all the facts.

For example, if "Bob" is caught in the kitchen with a ketchup stain on his shirt, you are inferencing that he used the ketchup.

However, if you see a ketchup bottle nearby or saw it earlier, then it is not, because you already have the facts that ketchup was used.

Answer:

They are chemically bonded to one another

Answer:

they can be classified as elements

Answer:

C

they store genetic information

B. They speed up chemical reactions

Answer:

The color of the solution turned a clear brown sort of a copper color

Explanation:

The color of the solution turned a clear brown sort of a copper color.

This is because ASA and the FeCl3 are reacting in a manner that it is resulting in the creation of a metal.

Answer: A volume of 1.16 L hydrogen is produced at a pressure of 2 atm and a temperature of 298 K.

Explanation:

Given: Mass of Mg = 2.3 g

Pressure = 2 atm

Temperature = 298 K

The reaction equation is as follows.

[tex]Mg + 2HCl \rightarrow MgCl_{2} + H_{2}[/tex]

This shows that 1 mole of Mg gives 1 mole of [tex]H_{2}[/tex].

Hence, moles of Mg for the given mass is calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{2.3 g}{24.30 g/mol}\\= 0.095 mol[/tex]

Hence, 0.095 moles of Mg will give 0.095 moles of [tex]H_{2}[/tex].

Formula used to calculate volume is as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into the above formula as follows.

[tex]PV = nRT\\2 atm \times V = 0.095 mol \times 0.0821 L atm/mol K \times 298 K\\V = \frac{0.095 mol \times 0.0821 L atm/mol K \times 298 K}{2 atm}\\= 1.16 L[/tex]

Thus, we can conclude that a volume of 1.16 L hydrogen is produced at a pressure of 2 atm and a temperature of 298 K.

Answer:

no lo se yo hablo en español no en ingles

Answer:

Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.

Explanation:

Answer:

anthropogenic sources like landfills, agricultural activities,coal mining and combustion and some sources are natural ones

Answer:

This is a chemical symbol for Potassium Bromide

Answer:

Option B.

C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O

Explanation:

To know which option is correct, we shall write the balanced equation for the combustion of cellulose. This is illustrated below:

C₆H₁₀O₅ + O₂ —> CO₂ + H₂O

There are 6 atoms of C on the left side and 1 atom on the right side. It can be balance by writing 6 before CO₂ as shown below:

C₆H₁₀O₅ + O₂ —> 6CO₂ + H₂O

There are 10 atoms of H on the left side and 2 atoms on the right side. It can be balance by writing 5 before H₂O as shown below:

C₆H₁₀O₅ + O₂ —> 6CO₂ + 5H₂O

There are a total of 7 atoms of O on the left side and a total of 17 atoms on the right side. It can be balance by writing 6 before O₂ as shown below:

C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O

Now, the equation is balanced.

Thus, option B gives the correct answer to the question.

Answer:

answers:

1.b

2.d

3.b

4. c

5.c

6.d

7.c

Explanation:

I think this is the correct answer pls mark brainliest and like..

19. place moth balls in the closet and observe after several days.

20. whenever wax or a candle burns it turns from solid to liquid but again at room temperature it turns to solid

21. evaporation, condensation, precipitation

22. it produces new substances

23. vinegar Bubbles when baking soda is added.

24. steam

Answer:

This reaction is exothermic because the system shifted to the left on heating.

Explanation:

2NO₂ (g) ⇌ N₂O₄(g)

Reactant => NO₂ (dark brown in color)

Product => N₂O₄ (colorless)

From the question given above, we were told that when the reaction at equilibrium was moved from room temperature to a higher temperature, the mixture turned dark brown in color.

This simply means that the reaction does not like heat. Hence the reaction is exothermic reaction.

Also, we can see that when the temperature was increased, the reaction turned dark brown in color indicating that the increase in the temperature favors the backward reaction (i.e the equilibrium shift to the left) as NO₂ which is the reactant is dark brown in color. This again indicates that the reaction is exothermic because an increase in the temperature of an exothermic reaction will shift the equilibrium position to the left.

Therefore, we can conclude that:

The reaction is exothermic because the system shifted to the left on heating.

The reaction is exothermic and the equilibrium position shifted to the left hand side.

An exothermic reaction is one in which heat is given out. Hence, the equilibrium position moves towards the left when the temperature is increased in an exothermic reaction.

Given the reaction, 2NO2(g) ⇌ N2O4(g) the appearance of a dark brown gas at high temperature implies that the reaction is exothermic and the equilibrium position shifted to the left hand side.

Learn more about exothermic reaction: https://brainly.com/question/15308590

Answer: A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.

Explanation:

When average temperature of Earth keeps on increasing for a longer period of time due to greenhouse gases, increased level of carbon dioxide and other gases etc then it is called global warming.

As humans use oxygen to sustain which is present in the air. So, when there will occur decrease in air quality that results from global warming then it means more illness or diseases will be there.

Hence, people will tend to die more often because of decrease in the air quality their health is getting affected.

Thus, we can conclude that a decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.

Answer:

A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.

Explanation:

Hope this helps.

Answer:

466J (c)

Explanation:

Mechanical Energy= Kinetic+Potential

Potential energy= mgh

Plug in givens

mgh=2.5*18*9.8=441J

Kinetic Energy = 1/2mv^2

Plug in givens

1/2mv^2= 1/2(2.5)(4.5)^2= 25.3125J

Mechanical energy= 441J+25.3125J=466.3125J or 466J

Answer:

v = 3,000,000,000 m/s

Explanation:

v = f *L

v = 3,000,000 * 1000

v = 3,000,000,000 m/s