Answer:
Gases do not have a definite shape or volume because the molecules in gases are very loosely packed, they have large intermolecular spaces and hence they move around. ... The particles of solid are closely packed and occupy less space while particles of gases are loosely packed and occupy the complete space available.
Explanation:
Please Mark me brainliest
the chemicals used in the preparation of carbondioxide gas are???
Answer:
Calcium carbonate and hydrochloric acid
Explanation:
The reaction of Calcium carbonate and Hydrochloric acid leads to the formation of Calcium Chloride and Carbon (IV) Oxide gas.
CaCO3 + 2HCl => CaCl2 + CO2 + H2O
Hydrogen gas (H2) is a promising alternative to fossil fuels. How many molecules are present in 1.0 kg of hydrogen gas
Answer:
3.01×10²⁶ molecules
Explanation:
From the question given above, the following data were obtained:
Mass of H₂ = 1 Kg
Number of molecules =?
From Avogadro's hypothesis,
1 mole of H₂ = 6.02×10²³ molecules
But 1 mole of H₂ = 2 × 1 = 2 g
Now, we shall determine the number of molecules present in 1 Kg (i.e 1000 g) of H₂ as follow:
From Avogadro's hypothesis,
2 g of H₂ = 6.02×10²³ molecules
Therefore,
1000 g of H₂ = 1000 × 6.02×10²³ / 2
1000 g of H₂ = 3.01×10²⁶ molecules
Thus, the number of molecules present in 1 Kg (i.e 1000 g) of H₂ is 3.01×10²⁶ molecules
Cuando aumenta la temperatura dentro de un recipiente cerrado que contiene un gas este se expande/comprime por que las partículas la forman se alejan/acercan
Tachar lo que no corresponda
Answer:
expande
forman se alejan
Explanation:
Según las leyes de los gases ideales;
La ley de Charles establece que el volumen de una masa dada de gas ideal es directamente proporcional a su temperatura a la presión simultánea.
Esto significa que cuando se calienta una masa dada de gas ideal, el gas se expande y las moléculas de gas se alejan unas de otras de acuerdo con la ley de Charles.
Explain Garri industry
Answer:
In West Africa, garri refers to the creamy granular flour obtained by processing the starchy tuberous roots of freshly harvested cassava. ... Flour foodstuffs mixed with cold or boiled water are a major part of the diet amongst the various ethnicities of Nigeria, Benin Republic, Togo, Ghana, Guinea, Cameroon and Liberia.
Explanation:
Hydrogen fluoride, HF exist as liquid at room temperature. Explain this phenomenon based on the formation of hydrogen bonds.
Explanation:
The hydrogen fluoride molecule is highly polar, in the liquid and gaseous phases, HF prone to formation hydrogen bonds. ... These hydrogen bonds are strong, their energy is 41.5 kj/mol.Hydrogen fluoride can be a liquid or gas at room temperature; it has a boiling point of 19.5 ºC. It is corrosive, colourless and has a very strong odour.The gaseous compound formed when dry fluorine gas reacts with dry Hydrogen, gas is called hydrogen fluoride. Hydrogen fluoride gas on condensation forms liquid hydrogen fluoride which is also referred to as anhydrous hydrogen fluoride or anhydrous hydrofluoric acidhope it helps
stay safe healthy and happy..Which is producer gas? a) CO+H2 b) CO+N2 c) CO+ O2 d) CO+H20
Answer:
co + H2 it is the answer may it helpfull
Answer:
d
Explanation:
because CO mixes with H2O
Why do strong bonds exist between water molecules?
They have nonpolar structure.
They are held together by hydrogen bonds.
The hydrogen end of a water molecule is weakly negative.
The shared electrons are more attracted to the hydrogen atom.
Answer: they are held together by hydrogen bonds I believe
Explanation:
The strong bonds exist between water molecules.Because they are held together by hydrogen bonds. Option B is correct.
What is a hydrogen bond?Hydrogen bonding is a bond between hydrogen atom, but rather a sort of dipole-dipole attraction between molecules.
The attractive force between a hydrogen atom covalently bound to a very electronegative atom such as an N, O, or F atom and another extremely electronegative atom causes it.
The strong bonds exist between water molecules.Because they are held together by hydrogen bonds. Hence,option B is correct.
Hence,option B is correct.
To learn more about hydrogen bond, refer:
https://brainly.com/question/10904296
#SPJ2
(d) (i) How can the water molecules from the iceberg end up as water in the lake?
Explanation:
If the iceberg is near the lake and the water molecules melt, then the molecules will slide down. The iceberg could be melting for many reasons - it can be purposely destroyed, the sun could be melting it, or it might naturally fall in. So, this is the answer to your question. Hope it helps!
If a substance contains ionic bonds, then its properties would include
Answer:
If the substance has high melting/boiling point, if it requires high temperature to dissociate into simpler particles, if it's structure is hard and if it conducts heat and electricity quite frequently, then it would be "Ionic compound" otherwise, it will be covalent compound.Explanation:
If a substance contains ionic bonds, then it’s properties would include high melting and boiling points, a crystalline structure, the ability to dissolve quite easily in water, the ability to conduct electricity, have good insulation and lastly be quite hard and brittle.
If my answer was helpful, would you consider giving me a “Brainliest”?. Thank you :)
Aluminum hydroxide, with heat, creates__
Which of the following
Combination,decomposition,
Single replacement,
Double replacement,
Combustion
Answer: Decomposition is the answer
Explanation: why because aluminium hydroxide would decomposes in the presence of heat and would form an oxide which is aluminium oxide and would also form water as a product.
HOPE THIS HELPS!!
A chemical bond formed when two atoms share two pairs of electrons is a ________ bond; it is best described as ________.
Answer:
A chemical bond formed when two atoms share two pairs of electrons is a double bond; it is best described as a covalent bond.
Explanation:
A chemical bond in which two pairs of electrons are shared has to be defined as covalent since ionic bonds don't involve electron sharing. They consist only of electrostatic attraction between ions.
3. According to the Arrhenius theory, which list of compounds includes only acids?
A) HF, H2CO3, and HNO3
B) LiOH, HNO3, and CH3OH
C) H2PO4, HCO3, and NH4Cl
D) HNO3, H2SO4, and C6H12O6
Answer:
C) H2PO4, HCO3, NH4Cl
Explanation:
Because all of the above compounds on reaction with water liberate H+ ion which is the identification of an acid acc to Arhenius Theory
What is matter mad of?
Answer:
Matter is made up of many elements
Answer:
matter is made of smallest tiniest invisible particles.
need help really quickly!!
so how do you predict products when only reactants are given?
i can do everything else that’s asked for the hw but i don’t know how to do this one.
the first pair of reactants is calcium hydroxide + ammonium chloride.
Answer: so in this question are reactants are calcium hydroxide and ammonium chloride
Explanation: first of all know that a salt would be formed so here the salts present are calcium and chloride so they would react to form the salt calcium chloride, then since ammonium ions are present ammonia gas would be formed then, hydroxide ions (OH) are also present so water would be formed so our final products would be calcium chloride , ammonia and water .
WORD EQUATION
calcium hydroxide+ ammonium chloride⇒ calcium chloride+ ammonia+ water
CHEMICAL EQUATION
CA(OH)2+2NH4CL⇒ CACL2+2NH3+2H2O
Calculate the Empirical Formula for the following compound:
0.300 mol of S and 0.900 mole of O.
Answer:
[tex]\boxed {\boxed {\sf SO_3}}[/tex]
Explanation:
An empirical formula shows the smallest whole-number ratio of the atoms in a compound.
So, we must calculate this ratio. Since we are given the amounts of the elements in moles, we can do this in just 2 steps.
1. DivideThe first step is division. We divide the amount of moles for both elements by the smallest amount of moles.
There are 0.300 moles of sulfur and 0.900 moles of oxygen. 0.300 is smaller, so we divide both amounts by 0.300
Sulfur: 0.300/0.300= 1 Oxygen: 0.900/0.300= 3 2. Write Empirical FormulaThe next step is writing the formula. We use the numbers we just found as the subscripts. These numbers go after the element's symbol in the formula. Remember sulfur is S and there is 1 mole and oxygen is O and there are 3 moles.
S₁O₃This formula is technically correct, but we typically remove subscripts of 1 because no subscript implies 1 representative unit.
SO₃[tex]\bold {The \ empirical \ formula \ for \ the \ compound \ is \ SO_3}}[/tex]
(6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)= ?kj
Answer:
-2,802.960 kJ
Explanation:
The dimensional equation of the given quantities is presented as follows;
(6 mol) × (-393.5 kJ/mol) + (6 mol) × (-285.83 kJ/mol) - (1 mol) × (-1,273.02 kJ/mol) = ? kJ
The equation, can be written as follows;
[tex]\left (6 \times (-393.5) \, mol \times \dfrac{kJ}{mol} \right ) + \left(6 \times (-285.83) \, mol \times \dfrac{kJ}{mol} \right) - \left (1 \times (-1,273.02) \, mol \times \dfrac{kJ}{mol} \right) = ?[/tex]We note that [tex]mol \times \dfrac{kJ}{mol} \right) = kJ[/tex], therefore, the above equation becomes;
[tex]\left (6 \times (-393.5) \ kJ\right ) + \left(6 \times (-285.83) \ kJ \right) - \left (1 \, \times (-1,273.02) \ kJ \right) = -2,802.960 kJ[/tex]
Answer:
C. ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)
Explanation:
Got it right on edge.
: the one after is -2803.
thank you so much for putting all the answers in there
Answer:
[tex]\huge\color{cyan}{\colorbox{magenta}{Answer}}[/tex]
thank you
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place over the next few minutes? Molecules in both the metal and the surrounding air will start moving at lower speeds. Molecules in both the metal and the surrounding air will start moving at higher speeds. The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up. The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down. Mark this and return
(Please help)
1.what is the most common isotope for element x
2.calculate the average atomic mass for element x
Answer:
1. Isotope with mass number 39.
2. 39.02g/mol
Explanation:
1. The most common isotope is the isotope in the higher proportion, that is:
Isotope with mass number 39.
2. The average atomic mass is the sum of the masses times their abundance. For the element X:
Average atomic mass:
38*0.0967 + 39*0.7868 + 40*0.1134 + 41*0.0031
= 39.02g/mol
Help me and I'll make u Brainly eat and follow u
19. moth balls in the closet and observe after several days.
20. whenever wax or a candle burns it turns from solid to liquid but again at room temperature it turns to solid
21. evaporation, condensation, precipitation
22. it produces new substances
23. vinegar Bubbles when baking soda is added
24. steam
What is the Law of Octaves?
A. The rule used to compose a poem of eight lines
B. Law describing the special properties of elements within eight electrons in the outer shell.
C. Each note has a series of eight sub notes increasing in variation between it and the next notes.
D.When ordered by atomic mass every eight elements has similar properties
i believe the answer would be D. When ordered by atomics mass every eighth element has similar properties.
What type of a liquid will have a pH value equal to 7? (1 point)
Which of the following is the empirical formula for C4H8?
A. CH4
B. C6H6
C. C2H2
D. CH2
alculating Displacement under Constant Acceleration
Use the information from the graph to answer the
question
What is the total displacement of the object?
m
Velocity vs. Time
40
30
Velocity (m/s)
20
10
0
0
5
10
15
20
25
Time (s)
Intro
Done
ODO
ODDO
tivity
Answer:
[tex]10 {7}^{2} = [/tex]
What are the values of the solute amount in moles and the solution volume in liters.
Answer:
0.250L of solution. 0.250 moles of solute.
Explanation:
As you can see in the image, there is a beaker with an amount of solution. 1/2L are 500mL and each line of the beaker represents 100mL. That means the volume of the solution is approximately 250mL = 0.250L
Molarity is an unit of concentration defined as the moles of solute per liter of solution. A solution that is 1.000M contains 1.000 moles of solute per liter of solution.
As the volume of the solution is 0.250L, the moles are:
0.250L * (1.000mol/L) = 0.250 moles of solute
True or false, The mass of an electron is equal to the mass of a neutron.
Answer:
False
Explanation:
No, the mass of an electron is not equal to the mass of a neutron. Mass of neutron is greater than the mass of an electron.
Raw material for rayon comes from
a.cellulose
b.coal
c.petroleum
d.animal bones
Explanation:
the raw material for the rayon come from is cellulose
ASAP :))
How would a reaction that occurs without the addition of energy be
described?
A. At equilibrium
B. Spontaneous
C. Nonspontaneous
D. Not at equilibrium
Answer:
B
Explanation:
Exergonic reactions are also called spontaneous reactions, because they can occur without the addition of energy. ... In this case, the products, or final state, have more free energy than the reactants, or initial state. Endergonic reactions are non-spontaneous, meaning that energy must be added before they can proceed.
Exergonic reactions were often known as spontaneous reaction. since they can take place without the expenditure of energy.
What is exergonic reactions?
A reaction wherein energy is emitted mostly in presence of light or heat was known as just an exothermic reaction.
What is spontaneous reaction?
A spontaneous process would be one that happens without the system receiving any outside input.
Because exergonic events could proceed without the supply of energy, they are sometimes known as spontaneous reactions. The products possess greater free energy as compared to the reactants example. Endergonic reactions were non-spontaneous, which means they require the addition of energy before they can begin.
To know more about spontaneous reactions and exergonic reactions
https://brainly.com/question/13790391
#SPJ2
alguien que me pase una pagina para mirar nopor
Answer:
no pues nadie te pasa la pagina
When a theory is disposed by further evidence, which of the following occurs
Answer:
it adds to scientific knowledge