Answer:
For a: Lead iodide is a yellow precipitate.
For b: Barium sulfate is a white precipitate.
For c: Ferric hydroxide is a brown precipitate.
For d: Copper (II) hydroxide is a blue precipitate.
Explanation:
Precipitation reaction is defined as the reaction where a solid precipitate (solid substance) is formed at the end of the reaction. It is insoluble in water.
For the given options:
For (a):The chemical reaction between KI and lead (II) nitrate follows:
[tex]2KI(aq)+Pb(NO_3)_2(aq)\rightarrow PbI_2(s)+2KNO_3(aq)[/tex]
The iodide of lead is generally insoluble in water. Thus, lead iodide is a yellow precipitate.
For b:The chemical reaction between barium chloride and sulfuric acid follows:
[tex]BaCl_2(aq)+H_2SO_4(aq)\rightarrow BaSO_4(s)+2HCl(aq)[/tex]
The sulfate of barium is insoluble in water. Thus, barium sulfate is a white precipitate.
For c:The chemical reaction between NaOH and ferric chloride follows:
[tex]3NaOH(aq)+FeCl_3(aq)\rightarrow Fe(OH)_3(s)+3NaCl(aq)[/tex]
The hydroxide of iron is insoluble in water. Thus, ferric hydroxide is a brown precipitate.
For d:The chemical reaction between NaOH and copper sulfate follows:
[tex]CuSO_4+2NaOH\rightarrow Cu(OH)_2+Na_2SO_4[/tex]
The hydroxide of copper is insoluble in water. Thus, copper (II) hydroxide is a blue precipitate.
(a) The yellow precipitate formed in the reaction between KI and Pb(NO3)2 would be PbI2 according to the equation:
[tex]Pb(NO_3)_2(aq) + 2KI(aq) ---> PbI2(s) + 2KNO_3(aq)[/tex]
(b) The white precipitate formed in the reaction between BaCl2 and H2SO4 would be BaSO4 according to the equation:
[tex]BaCl_2 (aq) + H_2SO_4 (aq) ---> BaSO_4 (s) + 2 HCl (aq)[/tex]
(c) The brown precipitate formed in the reaction between NaOH and FeCl3 would be Fe(OH)3 according to the equation:
[tex]FeCl_3 (aq) + NaOH (aq) ---> Fe(OH)_3 (s) + NaCl (aq)[/tex]
(d) The blue precipitate formed in the reaction between CuSO4 and NaOH would be Cu(OH)2 according to the equation:
[tex]CuSO_4(aq) + 2 NaOH (aq) ---> Cu(OH)_2 (s) + Na_2SO_4 (aq)[/tex]
More on precipitation reaction can be found here: https://brainly.com/question/24846690
A cylinder contains 3.1 L of oxygen at 300 K and 2.7 atm. The gas is heated, causing a piston in the cylinder to move outward. The heating causes the temperature to rise to 610 K and the volume of the cylinder to increase to 9.4 L.
How many moles of gas are in the cylinder?
Express your answer using two significant figures.
Answer: The moles of gas present in the cylinder is 0.34 moles.
Explanation:
Given: [tex]P_{1}[/tex] = 2.7 atm, [tex]V_{1}[/tex] = 3.1 L, [tex]T_{1}[/tex] = 300 K
[tex]P_{2}[/tex] = ?, [tex]V_{2}[/tex] = 9.4 L, [tex]T_{2}[/tex] = 610 K
Formula used to calculate the final temperature is as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{2.7 atm \times 3.1 L}{300 K} = \frac{P_{2} \times 9.4 L}{610 K}\\P_{2} = \frac{5105.7}{2820} atm\\= 1.81 atm[/tex]
Now, moles present upon heating the cylinder are as follows.
[tex]P_{2}V_{2} = n_{2}RT_{2}\\1.81 atm \times 9.4 L = n_{2} \times 0.0821 L atm/mol K \times 610 K\\n_{2} = \frac{17.014}{50.081} mol\\= 0.34 mol[/tex]
Thus, we can conclude that moles of gas present in the cylinder is 0.34 moles.
determine the number of moles of Cl in 1.9 mol of CaCl2
Explanation:
In the formula of [tex]CaCl_2[/tex] we can see that there are 2mol Cl in 1 molecule of CaCl2. So, now we can do some math to find out how many mol of Cl there are in 1.9mol CaCl2!
[tex]1.9molCaCl_2*\frac{2molCl}{1molCaCl_2}[/tex]
So, there are 3.8mol Cl
this was in my science test just want to see if anyone knows?? the wording is so confusing
the relative atomic mass of an element compares the mass of an atom of an element with the mass of an atom of.......
Answer:
the molar mass of the element
When 1-methylcyclopentene undergoes acid catalyzed hydration, the major product formed is 1-methylcyclopentanol. What change(s) in the reactants would result in 2-methylcyclopentanol being the major product
Answer:
Conversion of 1-methyl cyclopentene to 2-methyl cyclopentanol.
Explanation:
When alkenes react with diborane followed by the reaction with hydrogen peroxide and NaOH then the least substituted carbon in the double bond will be substituted.
The formation of 2-methyl cyclopentanol from 1-methyl cyclopentene is shown below:
Diethyl ether (C2H5 )2O vaporizes at room temperature. If the vapor exerts a pressure of 233 mm Hg in a flask at 25 °C, what is the density of the vapor?
Answer: The density of the given vapor is 0.939 g/L.
Explanation:
Given: Pressure = 233 mm Hg (1 mm Hg = 0.00131579 atm) = 0.31 atm
Temperature = [tex]25^{o}C[/tex] = (25 + 273) K = 298 K
According to the ideal gas equation,
[tex]PV = \frac{m}{M}RT[/tex]
where,
P = pressure
V = volume
m = mass
M = molar mass
R = gas constant = 0.0821 L atm/mol K
T = temperature
This formula can be re-written as follows.
[tex]PM = \frac{m}{V}RT[/tex] (where, [tex]Density = \frac{mass (m)}{Volume (V)}[/tex] )
Hence, formula used to calculate density of diethy ether (molar mass = 74.12 g/mol) vapor is as follows.
[tex]d = \frac{PM}{RT}[/tex]
Substitute values into the above formula as follows.
[tex]d = \frac{PM}{RT}\\= \frac{0.31 atm \times 74.12 g/mol}{0.0821 L atm/mol K \times 298 K}\\= \frac{22.9772}{24.4658}\\= 0.939 g/L[/tex]
Thus, we can conclude that the density of the given vapor is 0.939 g/L.
1. Calculate the percent recovery of benzoic acid, naphthalene and 3-nitroaniline if you were able to collect 10.75 g of benzoic acid, 5.41 g of naphthalene, and 7.81 g of 3-nitroaniline from a set of extractions. The starting mass of the mixture was 25.04 g. (0.6 pt) 2. Describe why it is important to use sodium hydroxide and hydrochloride acid in this experiment. Why was it necessary to initially start off with a 5% solution of the acid or base for this experiment
Explanation:
1.)
mass = 25.04
percentage recovery
[tex]benzoic acid = \frac{10.75}{25.04} = 0.4293*100 = 42.93%\\[/tex]
[tex]naphtalene =\frac{5.41}{25.04} = 0.2160*100 = 21.60\\3-nitroaniline=\frac{7.81}{25.04} =0.3119*100=31.19[/tex]
2. This experiment has these compounds, benzoic acid (which is an acid), naphthalene (this is neutral) and 3-nitroaniline (this is a base).
to extract, 5 percent of NaOH has to be used in order for benzoic acid to become with sodium hydroxide. the salt would then dissolve in H2O, the other two remaining are going to dissolve in organic layer. and this would make benzoic acid to leave the mix.
we make use of 5 percent of HCl so that the 3-nitroaniline will turn into ammonium salt with the hcl, then the ammonium salt would dissolve in water and naphtalene would become soluble in organic layer. when this happens we would then have the three compounds separated.
According to the following pKa values listed for a set of acids, which would lead to the strongest conjugate base?
a. -2.
b. 1.
c. 7.
d. 25.
e. 50.
Which of the following can be determined from the frequency of a light wave?
O A. The height of the wave
O B. The direction of the wave
O C. The source of the wave
O D. The energy of the wave
I Am Thinking A.
Answer:
The answer is d because the light is energy of wave
The frequency of a light wave can be determined
The energy of the wave.So, option D is correct one.
What is frequency?
The number of occurrence of repeating events per unit time is called frequency.The units of frequency is per second or Hertz(Hz).The frequency is used to calculate energy of light .The frequency is directly proportional to the energy. So, if frequency increases the energy also increases.Energy equation,
[tex]E= hv[/tex]
where,
[tex]E[/tex] = Energy of light
[tex]h[/tex]= Planks constant
[tex]v[/tex] = Frequency of wave.
To learn more about frequency,
https://brainly.com/question/14320803
#SPJ2
The size of an atomic orbital is associated with:______________
a. the magnetic quantum number (ml).
b. the spin quantum number (ms).
c. the angular momentum quantum number (l).
d. the angular momentum and magnetic quantum numbers, together.
e. the principal quantum number (n).
Answer:
e. the principal quantum number (n).
Explanation:
The size of the orbital is governed and decided by the principal quantum number n, which is dependent on the overall average distance between the number of electrons as well as the nucleus. The orbital's shape is explained by the angular quantum number. The magnetic quantum number is concerned with the orbital's orientation in space. The quantum number's spin explains the spin of the electrons.
Draw 2,3-dichloro octane
Answer:
Hi friend
I hope this image will help you if not I'm sorry
if this help you please mark me as brinalist or vote me.
Thankyou
A chemist combines 33 g of methane with 289 g of oxygen to from 189 g of carbon dioxide and 30 g of water. Determine if the results of the following word problem adheres to the Law of Conservation of Mass.
Answer:
The correct answer is - no not adhere to the law of mass conservation.
Explanation:
According to the law of mass conservation in an isolated system, the mass can not be created or destroyed and in a chemical or physical change, the mass of products should be always equal to the mass of reactants.
On the basis of the law the mass of the chemical reaction-
Mass of products = mass of reactants
33 g of methane + 289g of oxygen = 189g of carbon dioxide + 30g of water
322g ≠ 219 g
which means this reaction does not adhere to the law of conservation.
What is unit? Write down the units of mass, temperature and power
Explanation:
a single thing, person, or group forming part of a whole There are 36 units in my apartment building. the least whole number : one. a fixed quantity (as of length, time, or value) used as a standard of measurement An inch is a unit of length.mass=kilogram (kg)
temperature=kelvin
power=watt
hope it helps
stay safe healthy and happy..What is the
energy
2) The energy transition from n = 1 →n= 3 in hydrogen is 12.09 eV (1.6022 X 10J= 1 eV)-
of light emitted from n = 3 →n=1?
E e fiz
Answer:
energy is the ability to do work
Explain carefully what happen to the propanol-water system if approximately
50% of propanol by mass is fractionally distilled. What will be the distillate and
the residue?
Answer:
In the case of mixtures of ethanol and water, this minimum occurs with 95.6% by mass of ethanol in the mixture. The boiling point of this mixture is 78.2°C, compared with the boiling point of pure ethanol at 78.5°C, and water at 100°C. You might think that this 0.3°C doesn't matter much, but it has huge implications for the separation of ethanol / water mixtures. The next diagram shows the boiling point / composition curve for ethanol / water mixtures. I've also included on the same diagram a vapor composition curve in exactly the same way as we looked at on the previous pages about phase diagrams for ideal mixtures.
If an object has a mass of 243.8 g and occupies a volume of 0.125L, what will be the density of this object in gm/cm3?
Answer:
it might reach to 4g per L
A chemical reaction occurring in a cylinder equipped with a moveable piston produces 0.601 mol of a gaseous product. If the cylinder contained 0.300 mol of gas before the reaction and had an initial volume of 2.16 L, what was its volume after the reaction
Answer:
4.33 L
Explanation:
Assuming ideal behaviour and that all 0.300 moles of gas reacted, we can solve this problem using Avogadro's law, which states that at constant temperature and pressure:
V₁n₂ = V₂n₁Where in this case:
V₁ = 2.16 Ln₂ = 0.601 molV₂ = ?n₁ = 0.300 molWe input the given data:
2.16 L * 0.601 mol = V₂ * 0.300 molAnd solve for V₂:
V₂ = 4.33 L3. A 3.455-g sample of a mixture was analyzed for barium ion by adding a small excess of sulfuric acid to an aqueous solution of the sample. The resultant reaction produced a precipitate of barium sulfate, which was collected by filtration, washed, dried, and weighed. If 0.2815 g of barium sulfate was obtained, what was the mass percentage of barium in the sample
Answer:
[tex]Ba\ percentage\ in\ Mass=4.8\%[/tex]
Explanation:
From the question we are told that:
Mass of mixture [tex]m=3.455g[/tex]
Mass of Barium [tex]m_b=0.2815g[/tex]
Equation of Reaction is given as
[tex]Ba2+ + H2SO4 => BaSO4 + 2 H+[/tex]
Generally the equation for Moles of Barium is mathematically given by
Since
[tex]Moles of Ba^{2+} = Moles of BaSO_4[/tex]
Therefore
[tex]Moles of Ba^{2+} = \frac{mass}{molar mass of BaSO4}[/tex]
[tex]Moles of Ba^{2+} = \frac{0.2815}{233.39}= 0.0012061 mol[/tex]
Generally the equation for Mass of Barium is mathematically given by
[tex]Mass\ of\ Ba^{2+} = Moles * Molar mass of Ba^{2+}[/tex]
[tex]Mass\ of\ Ba^{2+} = 0.0012061 * 137.33 = 0.1656 g[/tex]
Therefore
[tex]Ba\ percentage\ in\ Mass = mass of Ba^{2+}/mass of sample * 100%[/tex]
[tex]Ba\ percentage\ in\ Mass= \frac{0.1656}{ 3.455 }* 100%[/tex]
[tex]Ba\ percentage\ in\ Mass=4.8\%[/tex]
meeet.gooogle.com/ttp-wdqt-pad
Por favor, me ajudem.
Please, help me.
Someone can teach me English, because I'm from Brazil and if you know how to speak Spanish, it's better for me.
What types of house are found in very cold regions
Answer:
the house found in a very cold are Igloos or the ice house
Can someone please please help
Answer:
oxidizer
Explanation:
an example of an oxidizers are oxygen and hydrogen peroxide
A chemistry student needs 90.0mL of carbon tetrachloride for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of carbon tetrachloride is 1.59g*cm3- Calculate the mass of carbon tetrachloride the student should weigh out. Be sure your answer has the correct number of significant digits.
Answer:
volume = mass/density
Here, volume = 80g/1.59gcm-3 → 50.314 cm3
Explanation:
How many carbon atoms are there in 15 lbs of sugar, C12H22O11?
Answer:
A molecule of sucrose (C12H22O11) has 12 carbon atoms, 22 hydrogen atoms and 11 oxygen atoms.
Explanation:
if this does not help let me know :)
There are 1.4376 × 10²⁶ carbon atoms in 15 lbs of sugar (C12H22O11).
From the given information,
Using the standard conversion method;
1 lbs = 453.592 gram
∴
15 lbs = (453.592 gram × 15 lbs/1 lbs)
= 6803.88 grams
Now, we will need to determine the molar mass of the sugar compound C12H22O11.
Molar mass of C12H22O11 = (12 × 12) +(1 × 22) + (16 × 11)
Molar mass of C12H22O11 = 144 + 22 + 176
Molar mass of C12H22O11 = 342 g/mol
Using the relation:
[tex]\mathbf{Number \ of \ moles = \dfrac{mass}{molar \ mass}}[/tex]
Number of moles = [tex]\dfrac{6803.88 }{ 342}[/tex]
Number of moles of C12H22O11 = 19.894 moles
Since we've known the number of moles present in C12H22O11, the next thing to do is determine the number of molecules of sugar by using Avogadro's constant:
i.e.
number of moles of sugar = [tex]19.894 moles \times \dfrac{6.023 \times 10^{23}}{mol}[/tex]
= 1.198 × 10²⁵ molecules of C12H22O11
Now to determine the number of carbon atoms in 15 lbs, we have:
= number of carbon atoms × amount of molecules
= 12 × 1.198 × 10²⁵ carbon atoms
= 1.4376 × 10²⁶ carbon atoms
Therefore, we can conclude that there are 1.4376 × 10²⁶ carbon atoms present in 15 lbs of sugar, C12H22O11
Learn more about atoms here:
https://brainly.com/question/657632?referrer=searchResults
NaCl is ___ formula of common salt
A. Empirical formula
B. Molecular formula
C. Both A and B
D. None of them
6. Which compound contains no ionic character?
Answer:
The compound which doesn't contains ionic character is HC, H-atom and CL- atom shares 1 electron a to form covalent bond....
A solution of hydrochloric acid had a hydrogen ion concentration of 1.0 mol/dm3
Water was added to hydrochloric acid until the ph increased by 1
What was the hydrogen ion concentration of the hydrochloric acid after had been added?
Answer:
pH = -log[H+]
Where [H+] = Hydrogen ion concentration
In this case,
[H+] = 1 × 10^(-2) = 10^(-2)
log{10^(-2)} = -2
-log{10^(-2)} = -(-2) = 2
pH = -log{10^(-2)} = 2
and hi.!!!
Answer:
0.1
Explanation:
Hydrogen ion concentration can be calculated using the formula [H+] = 10^-pH
pH can be concentrated using ph = -log[H+]
let's calculate the initial pH before anything was added: pH = -log(1) = 0
it increased by 1 so the final pH is 1.
Now we'll find the [H+] of a solution with a pH of 1:
concentration = 10^(-1) = 0.1
In the experiment "Preparation and Standardization of a Sodium Hydroxide Solution", why was the burette rinsed with NaOH before filling it to "zero" for the titration?
Answer: The correct option is ALL OF THE ABOVE.
Explanation:
TITRATION is a type of volumetric analysis which is used for determining the concentration of solutions. In this process a specific volume of a solution is placed in a conical flask by means of a pipette and small quantities of a second solution is slowly added from a burette until the end point is reached. This is determined by a means of an indicator which shows a characteristic colour change.
During titration, the following precautions should be followed to avoid errors and maintain standardisation in the experiment.
--> Any air bubble in the burette and pipette must be removed during measurement
--> the burette tap should be tightened to avoid leakage.
--> Remove the funnel from the burette before taking any reading to avoid errors in reading the volume.
--> use the base solution such as Sodium Hydroxide Solution to rinse the burette after washing with soap and tap water:
• to remove any air bubble and fill it's tip
• to remove any residual liquid from the water and soap solution which may interfere with the results of the experiment.
• to check if the burette is in good condition.
Therefore all of the above options to the question are correct.
My question today is : The reaction of 11.9g go CHCl3 with excess chlorine produced 10.2g of CCl4, carbon tetrachloride. What is the percent yield
Answer:
66.7%
Explanation:
Step 1: Write the balanced equation
CHCl₃ + Cl₂ ⇒ CCl₄ + HCl
Step 2: Calculate the theoretical yield of CCl₄ from 11.9 g of CHCl₃
According to the balanced equation, the mass ratio of CHCl₃ to CCl₄ is 119.38:153.82.
11.9 g CHCl₃ × 153.82 g CCl₄/119.38 g CHCl₃ = 15.3 g CCl₄
Step 3: Calculate the percent yield of CCl₄
Given the experimental yield of CCl₄ is 10.2 g, we can calculate the percent yield using the following expression.
%yield = (exp yield/theo yield) × 100%
%yield = (10.2 g/15.3 g) × 100% = 66.7%
Given 0.60 mol CO2, 0.30 mol CO, and 0.10 mol H20, what is the partial pressure of the CO if the total pressure of the mixture was 0.80 atm?
Answer:
Explanation:
/ means divided by
* means multiply
1. formula is
partial pressure = no of moles(gas 1)/ no of moles(total)
0.30 mol CO/0.60 mol CO2 + 0.30 mol CO + 0.10 mol H20 ->
.3/(.6+.3+.1) =
.3/1 =
.3 =
partial pressure of CO
2.
.3 * .8 atm = .24
khanacademy
quizlet
The partial pressure of the CO is 0.24 atm if the total pressure of the mixture was 0.80 atm.
Dalton's Law of Partial pressureDalton's Law of partial pressure states that the total pressure exerted by non reacting gaseous mixture at a constant temperature and given volume is equal to the sum of partial pressure of all gases.
Dalton's Law of partial pressure using mole fraction of gas
Partial pressure of carbon monoxide (CO) = Mole fraction of carbon monoxide (CO) × Total pressure
Now, we have to find the first mole fraction of CO
Mole fraction of carbon monoxide (CO) = [tex]\frac{\text{moles of solute}}{\text{total moles of solute}}[/tex]
= [tex]\frac{\text{moles of CO}}{\text{moles of CO}_2 + \text{moles of CO} + \text{moles of H}_{2}O}[/tex]
= [tex]\frac{0.30}{0.60 + 0.30 + 0.10}[/tex]
= [tex]\frac{0.30}{1}[/tex]
= 0.3
Now, put the value in above equation, we get that
Partial pressure of carbon monoxide (CO)
= Mole fraction of carbon monoxide (CO) × Total pressure
= 0.3 × 0.8
= 0.24 atm
Thus, the partial pressure of the CO is 0.24 atm is the total pressure of the mixture was 0.80 atm.
Learn more about the Dalton's Law of partial Pressure here: https://brainly.com/question/14119417
#SPJ2
Write an equilibrium expression for each chemical equation involving one or more solid or liquid reactants or products.
Answer:
a.
[tex]Keq=\frac{[HCO_3^-][OH^-]}{[CO_3^{2-}]}[/tex]
b.
[tex]Keq=[O_2]^3[/tex]
c.
[tex]Keq=\frac{[H_3O^+][F^-]}{[HF]}[/tex]
d.
[tex]Keq=\frac{[NH_4^+][OH^-]}{[NH_3]}[/tex]
Explanation:
Hello there!
In this case, for the attached reactions, it turns out possible for us to write the equilibrium expressions by knowing any liquid or solid would be not-included in the equilibrium expression as shown below, with the general form products/reactants:
a.
[tex]Keq=\frac{[HCO_3^-][OH^-]}{[CO_3^{2-}]}[/tex]
b.
[tex]Keq=[O_2]^3[/tex]
c.
[tex]Keq=\frac{[H_3O^+][F^-]}{[HF]}[/tex]
d.
[tex]Keq=\frac{[NH_4^+][OH^-]}{[NH_3]}[/tex]
Regards!
Que es la actividad física y en qué mejora