Answer:
Kf = 0.389.
Explanation:
Hello there!
In this case, it turns out possible for us to solve this problem by firstly writing the equilibrium chemical equation and equilibrium expression for the formation of this complex:
[tex]B+C\rightleftharpoons BC\\\\Kf=\frac{[BC]}{[B][C]}[/tex]
Thus, we firstly calculate the concentrations at equilibrium, knowing that the reaction extent in this case is 0.00500mol (same as the formed moles of BC):
[tex][B]=[C]=\frac{0.0350L*1.00mol/L-0.00500mol}{0.0700L} =0.429M[/tex]
[tex][BC]=\frac{0.00500mol}{0.0700L} =0.0714M[/tex]
And finally, the equilibrium constant:
[tex]Kf=\frac{0.0714}{[0.429][0.429]}\\\\Kf=0.389[/tex]
Regards!
Ion R2+ có phân lớp ngoài cùng là 3p6
a.Viết cấu hình electron của R và R2+ dưới dạng chữ và ô obitan.
b.Xác định Z, chu kỳ, nhóm, phân nhóm và tên nguyên tố R.
c.Viết công thức oxit cao nhất của R
d.Nêu bộ trị số có thể có của 4 số lượng tử đối với R
CAN SOMEONE HELP ME PLZ AND THANKS WILL MARK U AS BRAINLIEST
Explanation:
2. [tex]2C_2H_6 + 7O_2 \rightarrow 4CO_2 + 6H_2O[/tex]
First, we need to find the number of moles of [tex]CO_2[/tex] at 300K and 1.5 atm using the ideal gas law:
[tex]n= \dfrac{PV}{RT}= \dfrac{(1.5\:\text {atm})(33\:L)}{(0.082\:\text{L-atm/mol-K})(300K)}[/tex]
[tex]=2.0\:\text{mol}\:CO_2[/tex]
Now use the molar ratios to find the number of moles of ethane to produce this much [tex]CO_2[/tex].
[tex]2.0\:\text{mol}\:CO_2 \times \left(\dfrac{2\:\text{mol}\:C_2H_6}{4\:\text{mol}\:CO_2}\right)[/tex]
[tex]=1.0\:\text{mol}\:C_2H_6[/tex]
Finally, convert this amount to grams using its molar mass:
[tex]1.0\:\text {mol}\:C_2H_6 \times \left(\dfrac{30.07\:\text g\:C_2H_6}{1\:\text{mol}\:C_2H_6} \right)[/tex]
[tex]=30.1\:g\:C_2H_6[/tex]
3. [tex]3Zn + 2H_3PO_4 \rightarrow 3H_2 + Zn_3(PO_4)_2[/tex]
Convert 75 g Zn into moles:
[tex]75\:\text g\:Zn \times \left(\dfrac{65.38\:\text g\:Zn}{1\:\text{mol}\:Zn}\right)=1.1\:\text{mol}\:Zn[/tex]
Then use the molar ratios to find the amount of H2 produced.
[tex]1.1\:\text{mol}\:Zn \times \left(\dfrac{3\:\text{mol}\:H_2}{3\:\text{mol}\:Zn}\right)=1.1\:\text{mol}\:H_2[/tex]
Now use the ideal gas law [tex]PV=nRT[/tex] to find the volume of H2 produced at 23°C and 4 atm:
[tex]V= \dfrac{nRT}{P}= \dfrac{(1.1\:\text{mol}\:H_2)(0.082\:\text{L-atm/mol-K})(296K)}{4\:\text{atm}}[/tex]
[tex]=8.9\:\text L\:H_2[/tex]
Calculate the energy in kj/mol of photon in red light of wavelength 656nm
Answer:
you don't know the answer?ha me too
Identify which of the compounds below are amphoteric.
a. hydrogen sulfide ion
b. sulfuric acid
c. dihydrogen phosphate
d. water
e. carbonate ion
Hydrogen sulfide ions, dihydrogen phosphate, and water are amphoteric. Therefore, option (a), (c), and (d) are correct.
What is amphoteric?Amphoteric can be stated as any compound that can be mixed with other compounds both as a base and an acid. Water is amphoteric as it can be transformed into a compound that can be mixed as an alkali or an acid.
Amphoterism is explaining the reactivity of a compound that indicates alkaline nature when mixed with an acid and describes acidic characteristics in an alkaline environment.
When acid reacts with water, it forms H₃O⁺ ion adding an H⁺ ion from the acid. When water is combined with a base, it donates a hydrogen H⁺ ion to the base and releases a hydroxide ion.
Besides water, there are many oxides and hydroxides are utilized in amphoterism. The substances that have both characteristics acids are proton donors and bases are proton acceptors are identified as amphoteric substances.
Therefore, HS⁻, H₂O, and H₂PO₄⁻ are amphoteric in nature.
Learn more about amphoteric, here:
https://brainly.com/question/2908795
#SPJ5
PLZZZ HELPPPPPPPPPPPPPPPP
Rank each of the following gases in order of increasing Urms assuming equivalent amounts and all gases are at the same temperature and pressure where 1 is the lowest Urms Gas 1: H2S Gas 2: He Gas 3: NF3 Gas 4: H20
Answer:
NF3< H2S< H2O< He
Explanation:
The average speed of a gas depends on the relative molecular mass of the gas. Lighter gases have a greater average speed and move faster than heavier gases.
Hence, we need to arrange these gases listed in the question in order of decreasing molecular mass in order to obtain the order of increasing Urms assuming equivalent amounts and all gases are at the same temperature and pressure.
Hence; NF3< H2S< H2O< He
which is the correct orbital diagram for carbon
Answer:
Below
Explanation:
Got it right
Check the periodic table, then click electrons
Determine whether each melting point observation corresponds to a pure sample of a single compound or to an impure sample with multiple compounds.
a. Wide melting point range __________
b. Experimental melting point is close to literature value _________
c. Experimental melting point is below literature value _________
d. Narrow melting point range __________
Answer:
Wide melting point range - impure sample with multiple compounds
Experimental melting point is close to literature value - pure sample of a single compound
Experimental melting point is below literature value - impure sample with multiple compounds
Narrow melting point range - pure sample of a single compound
Explanation:
The melting point of substances are easily obtainable from literature such as the CRC Handbook of Physics and Chemistry.
A single pure substance is always observed to melt within a narrow temperature range. This melting temperature is always very close to the melting point recorded in literature for the pure compound.
However, an impure sample with multiple compounds will melt over a wide temperature range. We also have to recall that impurities lower the melting point of a pure substance. Hence, the experimental melting point of an impure sample with multiple compounds is always below the literature value.
What is the IUPAC name for this organic molecule?
Answer:
2–methylbutane
Explanation:
To name the compound given above, the following must be obtained:
1. Determine the longest continuous carbon chain. This gives the parent name of the compound.
2. Determine the substituent group attached.
3. Determine the position of the substituent group by giving it the lowest possible count..
4. Combine the above to obtain the name of the compound.
With the above information, we can name the compound as follow:
1. The longest continuous carbon chain of the compound is 4. Thus, the parent name is butane.
2. The substituent group attached to the compound is methyl (–CH₃).
3. The methyl (–CH₃) group is located at carbon 2 (i.e counting from the left side).
4. The name of the compound is:
2–methylbutane
Which diagram shows the correct direction of electron flow in an electrolytic cell?
1)
2)
3)
4)
Sorry I couldn't put the diagram in, Thanks.
Answer:
A
Explanation:
Write a formula for the ionic compound that forms from magnesium
and oxygen.
Answer:
MgO
Explanation:
What is the purpose of the scientific method?
Answer:
C. To remove any source of bias in an experience
How do we fix climate change?
The biggest problem of course is conspiracy theorys. Some say it is just a hoxe when really their chidrin or grandchidrin will sufer greatly from it. How do we educate ourselfs better?
Answer:
Hi so your answer is that to helping fix the climate change you have to : speak up , power your home with renewable engery , reduce water waste , dont waste food , and finally invest energy .
Explanation:
Really hope i helped , have a nice day :)
Answer:
we can reduce air pollution,which is one of the main cause of climate change.Climate change is not a hoxe if it is not attending the upcoming generations will suffer greatly.
22)
)
Limestone can form as a result of
A)
metamorphosis of conglomerate rock
B)
cooling of molten rock under the oceans
C)
precipitation from evaporating water
D)
radioactive decay of dolostone
Answer:
tge answer is a
Explanation:
I'm smart like that
A certain shade of blue has a frequency of 7.16x10^14Hz. What is the energy of exactly one photon of this light? Planck’s constant h=6.626x10^-34 j•s.
Explanation:
the answer is in the image above
the total pressure in a mixture of gases is equal to the partial pressures of
Answer:
"The total pressure in a mixture of gases is equal to the sum of partial pressures of each gas"
Explanation:
Dalton's law of partial pressures state that, in a mixture of gases, the total pressure is equal to the sum of the partial pressure exerted by each gas of the mixture. The equation is:
Total pressure = Partial pressure Gas 1 + Partial pressure Gas 2 + .... + Partial pressure Gas n
To complete the sentence we can say:
"The total pressure in a mixture of gases is equal to the sum of partial pressures of each gas"
Considering the Dalton's partial pressure, the total pressure in a mixture of gases is equal to the sum of partial pressures of each gas.
The pressure exerted by a particular gas in a mixture is known as its partial pressure. So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
[tex]P_{T} =P_{A} +P_{B}[/tex]
This relationship is due to the assumption that there are no attractive forces between the gases.
Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.
So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:
[tex]P_{A} =x_{A} P_{T}[/tex]
In summary, the total pressure in a mixture of gases is equal to the sum of partial pressures of each gas.
Learn more:
https://brainly.com/question/14239096?referrer=searchResultshttps://brainly.com/question/25181467?referrer=searchResultshttps://brainly.com/question/14119417Draw the product formed when diene and dienophile react in a Diels–Alder reaction.
Answer:
Explanation:
Diels-Alder reactions are cyclo-additional reactions between conjugated dienes and a dienophile (a substituted alkene compound for example acrylic acid) to produce a ring structure of cyclohexene compounds.
From the image attached below, we will see the reaction between 2,3-dimethylbuta-1,3-diene which is a conjugated diene with acrylic acid to produce a Diel-Alder adduct as the product. From the reaction, a single new π-bond and two σ-bonds are produced.
How many liters of hydrogen gas are required to react with 3.5" liters of oxygen gas in the following reaction? 2H2(g)+O2(g) -->2H2O(g)
Answer:
7 L of H₂.
Explanation:
The balanced equation for the reaction is given below:
2H₂ + O₂ —> 2H₂O
From the balanced equation above,
1 L of O₂ required 2 L of H₂.
Finally, we shall determine the volume of H₂ required to react with 3.5 L of O₂. This can be obtained as follow:
From the balanced equation above,
1 L of O₂ required 2 L of H₂.
Therefore, 3.5 L of O₂ will require
= 3.5 × 2 = 7 L of H₂.
Thus, 7 L of H₂ is required to for the reaction.
Identify the Lewis acid and Lewis base from among the reactants in each of the following equations.
Part A
Ag+(aq)+2NH3(aq)⇌Ag(NH3)2+(aq)
a. Ag+ is the Lewis acid and NH3 is the Lewis base.
b. Ag+ is the Lewis base and NH3 is the Lewis acid.
Part B
AlBr3+NH3⇌H3NAlBr3
a. AlBr3 is the Lewis base and NH3 is the Lewis acid.
b. AlBr3 is the Lewis acid and NH3 is the Lewis base.
Part C
Cl−(aq)+AlCl3(aq)⇌AlCl4−(aq)
a. AlCl3 is the Lewis acid and Cl− is the Lewis base.
b. AlCl3 is the Lewis base and Cl− is the Lewis acid.
Answer:
Part A
Ag+ is the Lewis acid and NH3 is the Lewis base.
Part B
AlBr3 is the Lewis acid and NH3 is the Lewis base.
Part C
AlCl3 is the Lewis acid and Cl− is the Lewis base.
Explanation:
A Lewis acid is any specie that accepts a lone pair of electrons. Ag^+, AlBr3 and AlCl3 all accepted lone pairs of electrons according to the three chemical reaction equations shown. Hence, they are Lewis acids.
A Lewis base donates a lone pair of electrons. They include neutral molecules having lone pair of electrons such as NH3 or negative ions such as Cl- .
When aqueous solutions of potassium cyanide and hydrobromic acid are mixed, an aqueous solution of potassium bromide and hydrocyanic acid results. Write the net ionic equation for the reaction.
Answer:
hey there
Explanation:
CN- (aq) + H+ (aq) → HCN(I)
The reactants are aqueous solutions:
NaCN(aq) and HBr(aq)
When you mix these compounds you make pure HCN (I)
The molecular equation is:
NaCN(aq) + HBr(aq) → NaBr(aq) + HCN(I)
When you dissociate the reactants, you have: Nat(aq) +CN¯(aq) + H*(aq) + Br−(aq) → Nat(aq) + ->
Br (aq) + HCN(I)
Sodium bromide, it is a salt, that can also be
dissociated in the solution
To make, the net ionic equation you remove the repeated ions
CN- (aq) + H+ (aq) → HCN(I)
If you like my answer please mark as brainliest
cho 6,72 gam Fe tan hết trong dung dịch H2SO4 đặc nóng dư thu được V lít khí SO2. Giá trị của V là
4,032
BT electron
nSO2= 3nFe/
Soap
a. Assume that Crisco is a single triacylglyceride (it is actually a mixture of triacylglycerides) in which all acyl groups are palmitate (palmitic acid = CH,3(CH2)14CO2H). Draw the structure of this triacylglyceride.
b. Show the products that are generated when Crisco and sodium hydroxide react. Use the same assumption as in question a. b. Show the products that are generated when Crisco and sodium hydroxide react. Use the same assumption as in question a.
c. What is the purpose of adding ethanol in the preparation of soap?
Answer:
Explanation:
From the given information:
The structure of the triacylglyceride can be seen in the first image attached below and the products produced as the result of the reaction between Crisco and sodium hydroxide (NaOH) are Glycerol and 3-Palmitic acid as shown in the second image below.
Lastly, the purpose of the addition of ethanol is because water and oils are not miscible. Thus, ethanol has the potential to mix and dissolve in water as well as in oil on a selective partial level. This method aids in the formation of water, soap, salt, and fatty acids from the interaction between fatty acid and sodium hydroxide. As a result, ethanol improves the interaction between the water and the oil. It is less polar to water and aids in the dissolution of nonpolar fats such that sodium hydroxide may react with ethanol.
What are the main modifications of John Dalton's atomic theory
3 The questions refer to the substances in the table.
Melting point/°C
Boiling point/°C
A
-259
-253
B
0
100
C
3700 (sublimes)
D
-116
34.5
E
801
1413
a Write down the physical states of each compound at
i 30°C.
ii -100°C
iii 80°C
Explanation:
3 The questions refer to the substances in the table.
Melting point/°C
Boiling point/°C
A
-259
-253
Why can characteristics properties be used to identify unknown substances
Characteristic properties are used because the sample size and the shape of the substance does not matter.
Can someone help me answer this please
Answer:
A) 1.3 × 10⁻⁵ mol/L
Explanation:
Step 1: Write the balanced equation for the solution of AgCl
AgCl(s) ⇄ Ag⁺(aq) + Cl⁻(aq)
Step 2: Make an ICE Chart
AgCl(s) ⇄ Ag⁺(aq) + Cl⁻(aq)
I 0 0
C +S +S
E S S
If we replace the solubility (S) in the Ksp expression, we get,
Ksp = [Ag⁺] [Cl⁻] = S × S = S²
S = √Ksp = √1.8 × 10⁻¹⁰ = 1.3 × 10⁻⁵ mol/L
How many aluminum atoms are in 2.88 g of aluminum?
Express your answer to three significant figures.
Answer:
Explanation:
1 Mole of Aluminum with mass 26.98g contains 6.02*10^23 atoms.
In 2.88g of Aluminum, there are 2.88/26.98*6.02*10^23 = 6.426*10^22 atoms.
Answer:
Explanation:
no of Al atoms = 2.88/26.98*6.02*10^23
= 6.426*10^22
= 6.43*10^22
Select the correct answer.
What is the solution to the problem expressed to the correct number of significant figures?
(102,900 ÷ 12) + (170 × 1.27) = ?
Which of the following is a protein source of plant origin
Answer:
soy....plant protein also is found in vegtables and grain products.
The protein that is derived from the plant is soyabean. Protein-rich foods have a rich source of amino acids. Amino acids are required by the body for different cellular activities.
What are proteins?
Proteins are present in plant-based foods and animal-based foods. In nature, the plant-based foods that are rich in proteins are soybeans, beans etc. Animal products such as dairy products, milk, and cheese are rich sources of proteins.
Animal-based foods such as eggs, meat, and fish have a good amount of protein. The proteins are made up of amino acids. Peptide bonds connect each amino acid to the next.
Proteins are necessary for the body, as cells need amino acids for both structural and functional support. Not all cells of the body synthesise all amino acids. Some essential amino acids are required by the body and can be taken from external sources such as plants.
Hence, the plant-based protein is soyabean.
To learn more about the protein, here
https://brainly.com/question/17095120
#SPJ2.
The question is incomplete; the complete question may be the following:
1) Which of the following is a protein source of plant origin?
A)egg
B) Soyabean
C)cheese
D)Milk
What is the pH of a solution with a 7.8 × 10−13 M hydronium ion concentration?
A) 1.9
B) 2.8
C) 11
D) 12
Answer:
12Explanation:
The pH of a solution can be found by using the formula
[tex]pH = - log [ { H_3O}^{+}][/tex]
From the question we have
[tex]ph = - log(7.8 \times {10}^{ - 13} ) \\ = 12.1079...[/tex]
We have the final answer as
12Hope this helps you
The pH of this solution with a 7.8 × 10⁻¹³ M concentration of hydronium ion is equal to: D. 12.
Given the following data:
Concentration of hydronium ion = 7.8 × 10⁻¹³ M.
What is pH?pH is literally the power of hydrogen ions and it can be defined as a measure of the molar concentration of hydrogen ions in a given solution.
How to calculate the pH of a solution?We would determine the pH of this solution by using this formula;
pH = -log[H⁺]
pH = -log(7.8 × 10⁻¹³).
pH = -(-12.1)
pH = 12.1 ≈ 12.
Read more on pH here: brainly.com/question/24233266
#SJP2