g 1-1 Which network model layer provides information about the physical dimensions of a network connector like an RJ45

Answer:

The answer is "False"

Explanation:

It is put to use Six Sigma had 3.4 defects per million opportunities (DPMO) from the start, allowing for a 1.5-sigma process shift. However, the definition of zero faults is a little hazy. Perhaps the area beyond 3.4 DPMO is referred to by the term "zero faults.", that's why Before being released, large computer programs, such as operating systems, must have no faults the wrong choice.

Answer:

Following are the code to the given question:

user_num = int(input())#defining a variable user_num that takes input from user-end

x = int(input())#defining a variable x that takes input from user-end

for j in range(3):#defining for loop that divides the value three times

   user_num = user_num // x#dividing the value and store integer part

   print(user_num)#print value

Output:

2000

2

1000

500

250

Explanation:

In the above-given program code two-variable "user_num and x" is declared that inputs the value from the user-end and define a for loop that uses the "j" variable with the range method.

In the loop, it divides the "user_num" value with the "x" value and holds the integer part in the "user_num" variable, and prints its value.  

Answer:

Authorization

Explanation:

The kind of service that they are requesting is known as Authorization. This is basically when a user, such as the DevOps team in this scenario, is requesting permission to access a certain service or function that is locked. In this scenario, the services being requested are the read/write access which would allow the DevOps team to manipulate the data in the storage bucket. This is usually locked because the data is sensitive and innapropriate changes can cause many errors in the system. Therefore, authorization is needed to make sure that only specific users have access.

Answer:

if (numCycles < 1){

        System.out.println("Too few.");

     }

     else if (numCycles > 4){

        System.out.println("Too many.");

        }    

  else{

     for(int i = 1; i <= numCycles; i++)

  {

     System.out.println(i + ": Lather and rinse.");

  }

     System.out.println("Done.");

  }

Explanation:

Answer:

c. Bond Spread

Explanation:

An interactive chart is used to show all the details in the chart and the user can extend or shrink the details that is presented in the charts by using the slider control.

The bond spread in an interactive is a chart that is used to compare and chart the current spread between the corporate bond as well as the benchmark government bond.

In Interactive Charting, the chart type that give room for charting the current spread between a corporate bond and a benchmark government bond is C:Bond Spread.

An interactive charts serves as a chart that give room to the user to carry out zooming actions as well as hovering a marker to get a tooltip and avenue to choose variable.

One of the notable type of this chart is Bond Spread, with this chart type, it is possible to charting the current spread that exist between a corporate bond as well as benchmark government bond.

Therefore, option C is correct because it allows charting of the current spread between a corporate bond.

Learn note about interactive charts at:

https://brainly.com/question/7040405

Answer:

b. The constructor for the parent class is called.

Explanation:

In this case this specific piece of code is calling the constructor for the parent class. Since a MountainBike object is being created. This creation uses the MountainBike class constructor but since this is a subclass of the Bicycle class, the super() method is calling the parent class constructor and passing the variables startCadence, startSpeed, startGear to that constructor. The Bicycle constructor is the one being called by super() and it will handle what to do with the variables inputs being passed.

Answer:

1. Identification of a vacancy and development of the job description.

2. Recruitment planning

3. Advertising

4. Assessment and Interview of applicants

5. Selection and Appointment of candidates

6. Onboarding

Explanation:

The Recruitment process refers to all the stages in the planning, assessment, and absorption of candidates in an organization. The stages involved include;

1. Identification of a vacancy and development of the job description: This is the stage where an obvious need in the organization is identified and the duties of the job requirement are stipulated.

2. Recruitment planning: This is the stage where the HR team comes together to discuss the specific ways they can attract qualified candidates for the job.

3. Advertising: The HR team at this point seeks out job sites, newspapers, and other platforms that will make the opportunities accessible to applicants.

4. Assessment and Interview of applicants: Assessments are conducted to gauge the candidates' knowledge and thinking abilities. This will provide insight into their suitability for the job.

5. Selection and Appointment of candidates: Successful candidates are appointed to their respective positions. A letter of appointment is given.

6. Onboarding: Candidates are trained and guided as to the best ways of discharging their duties.

Automation tools allow applications, businesses, teams or organizations to automate their processes which could be deployment, execution, testing, validation and so on. Automation tools help increase the speed at which processes are being handled with the main aim of reducing human intervention.

Linkedln automation tools are designed to help automate certain processes in Linkedln such as sending broadcast messages, connection requests, page following and other processes with less or no human or manual efforts. Some of these automation tools include;

i. Sales navigator for finding right prospects thereby helping to build and establish trusting relationships with these prospects.

ii. Crystal for providing insights and information about a specified Linkedln profile.

iii. Dripify used by managers for quick onboarding of new team members, assignment of roles and rights and even management of subscription plans.  

Answer:

Well, for me I personally use LinkedCamap to drive more LinkedIn connections, hundreds of leads, sales, and conversions automatically.  

Some other LinkedIn automation tools are;  

Hope this helps!

Answer:

caca

Explanation:

Answer:

see the code snippet below writing in Kotlin Language

Explanation:

fun main(args: Array<String>) {

   sumOfNumbers()

}

fun sumOfNumbers(): Int{

   var firstNum:Int

   var secondNum:Int

   println("Enter the value of first +ve Number")

   firstNum= Integer.valueOf(readLine())

   println("Enter the value of second +ve Number")

   secondNum= Integer.valueOf(readLine())

   var sum:Int= firstNum+secondNum

  println("The sum of $firstNum and $secondNum is $sum")

   return sum

}

Answer:

The Rich Text Format is a proprietary document file format with published specification developed by Microsoft Corporation from 1987 until 2008 for cross-platform document interchange with Microsoft products.

Answer:

Hence the answer is top and peek.

Explanation:

In a stack, we insert and delete an item from the top of the stack. So we use variables top, peek to stay track of the position.

The insertion operation is understood as push and deletion operation is understood as entering stack.

Hence the answer is top and peek.

Answer:

Explanation:

Freeware and shareware programs are softwares which are either free of charge or consist of a free version for a certain trial period. These programs pose a threat of habouring malware or viruses which could damage one's computer and important files and programs. Therefore, it is imperative that carefulness is maintained when trying to get these softwares.

Some of the necessary safety conditions that should be taken include;

1) Appropriate research about the software including taking more about the vendors and reviews.

2.) Once, a healthy review has been identified ; the download can begin with the Downloader ensuring that the download is from the recommended site.

3) Prior to installation the software should be scanned with an active anti-virus program to determine if there is possibility that a virus has creeped in.

4.) Some softwares may require that computer anti-virus be turned off during installation, this is not always a good idea as this act leaves the system vulnerable a d badly exposed.

Answer:

A.

the final keyword is used to denote constants. It can be used with variables, methods, and classes. Once any entity (variable, method or class) is declared final , it can be assigned only once.

B.

Static variables are declared in the same place as instance variables, but with the keyword 'static' before the data type. While instance variables hold values that are associated with an individual object, static variables' values are associated with the class as a whole.

Answer:

In addition, a few modern printers can directly interface to electronic media such as memory cards, or to image capture devices such as digital cameras, scanners; some printers are combined with a scanners and/or fax machines in a single unit, and can function as photocopiers.

Answer:

A heading style to add a document title

The feature can she use to add a document title at the top of each page is - Heading style. Therefore option A is the correct resposne.

A footer is a text that is positioned at the bottom of a page, whereas a header is text that is positioned at the top of a page. Usually, details about the document, such as the title, chapter heading, page numbers, and creation date, are inserted in these spaces.

A piece of the document that appears in the top margin is called the header, while a section that appears in the bottom margin is called the footer. Longer papers may be kept structured and made simpler to read by including more information in the headers and footers, such as page numbers, dates, author names, and footnotes. Each page of the paper will have the header or footer text you input.

To read more about Header and Footer, refer to - https://brainly.com/question/20998839

#SPJ2

Answer:

Hence the answer is a sum.

Explanation:

Here the statement shows that the dashboard should show the sum and average as two separate columns if we name measure names because the column field then for marks we'll use the sum. Since the sum displays the sum of the values of all the fields, which refers to the marks of the person.

Therefore the answer is a sum.

If we use measure names as the column field, we should use "the sum".

A set of cells that are support equipment on about a similar vertical line, is considered as a column.

The preceding reply is thus right.

Learn more:

https://brainly.com/question/17271202

Answer. Network

Explanation:

Answer:

"Warm; Cool/receding" is the correct answer.

Explanation:

Thus the above is the right answer.

From method names, I am compelled to believe you are creating some sort of a Lexer object. Generally you implement Lexer with stratified design. First consumption of characters, then tokens (made out of characters), then optionally constructs made out of tokens.

Hope this helps.

Answer:

Explanation:

#include <stdarg.h>  

main()  

{  

display("Hello", 4, 12, 13, 14, 44);  

}  

display(char *s,...)  

{  

va_list ptr;  

va_start(ptr, s);  

show(s,ptr);  

}  

show(char *t, va_list ptr1)  

{  

int a, n, i;  

a=va_arg(ptr1, int);  

for(i=0; i<a; i++)  

 {  

n=va_arg(ptr1, int);  

printf("\n%d", n);  

}  

}

Answer: is this a real question but I think it would be Ip address hope this helps :)))

Explanation:

Answer:

i hope you understand

mark me brainlist

Explanation:

Explanation:

#include <iostream>

#include <vector>

using namespace std;

void vector_sort(vector<int> &vec) {

int i, j, temp;

for (i = 0; i < vec.size(); ++i) {

for (j = 0; j < vec.size() - 1; ++j) {

if (vec[j] > vec[j + 1]) {

temp = vec[j];

vec[j] = vec[j + 1];

vec[j + 1] = temp;

}

}

}

}

int main() {

int size, n;

vector<int> v;

cin >> size;

for (int i = 0; i < size; ++i) {

cin >> n;

v.push_back(n);

}

vector_sort(v);

for (int i = 0; i < size; ++i) {

cout << v[i] << " ";

}

cout << endl;

return 0;

}

Answer:

Explanation:

The following Java program has the method calcAverage(). It creates a sum variable which holds the sum of all the values in the array and the count variable which holds the number of elements in the array. Then it uses a For Each loop to loop through the array and go adding each element to the sum variable. Finally it calculates the average by dividing the sum by the variable count and returns the average to the user. A test case has been created in the main method using the example in the question. The output can be seen in the image attached below.

class Brainly {

   public static void main(String[] args) {

       int[] myArr = {1, 2, 3, 4, 5};

       System.out.println(calcAverage(myArr));

   }

   public static double calcAverage(int[] myArr) {

       double sum = 0;

       double count = myArr.length;

       for (int x: myArr) {

           sum += x;

       }

       double average = sum / count;

       return average;

   }

}

Answer:

An input size of N = 128 makes the algorithm run for 14 milliseconds

Explanation:

O(log2N)

This means that the running time for an algorithm of length N is given by:

[tex]F(N) = c\log_{2}{N}[/tex]

In which C is a constant.

Runs for 10 milliseconds when the input size (N) is 32.

This means that [tex]F(32) = 10[/tex]

So

[tex]F(N) = c\log_{2}{N}[/tex]

[tex]10 = c\log_{2}{32}[/tex]

Since [tex]2^5 = 32, \log_{2}{32} = 5[/tex]

Then

[tex]5c = 10[/tex]

[tex]c = \frac{10}{5}[/tex]

[tex]c = 2[/tex]

Thus:

[tex]F(N) = 2\log_{2}{N}[/tex]

What input size makes the algorithm run for 14 milliseconds

N for which [tex]F(N) = 14[/tex]. So

[tex]F(N) = 2\log_{2}{N}[/tex]

[tex]14 = 2\log_{2}{N}[/tex]

[tex]\log_{2}{N} = 7[/tex]

[tex]2^{\log_{2}{N}} = 2^7[/tex]

[tex]N = 128[/tex]

An input size of N = 128 makes the algorithm run for 14 milliseconds

Answer:

Code:-

// Program takes a hot dog order

// And determines price  

using System;

using static System.Console;  

class DebugFour1

{

   static void Main()

   {

       const double BASIC_DOG_PRICE = 2.00;

       const double CHILI_PRICE = 0.69;

       const double CHEESE_PRICE = 0.49;

       String wantChili, wantCheese;

       double price;

       Write("Do you want chili on your dog? ");

       wantChili = ReadLine();

       Write("Do you want cheese on your dog? ");

       wantCheese = ReadLine();

       if (wantChili == "Y")

       {

           if (wantCheese == "Y")

               price = BASIC_DOG_PRICE + CHILI_PRICE + CHEESE_PRICE;

           else

               price = BASIC_DOG_PRICE + CHILI_PRICE;

       }

       else

       {

           if (wantCheese == "Y")

               price = BASIC_DOG_PRICE + CHEESE_PRICE;

           else

               price = BASIC_DOG_PRICE;

       }

       WriteLine("Your total is {0}", price.ToString("C"));

   }

}

Base to be converted to was not included but we would assume conversion to base 10(decimal)

Answer and Explanation:

The 3DF in base 16 is a hex number so we need to convert to its equivalent binary/base 2 form:

We therefore each digit of given hex number 3DF in base 16 to equivalent binary, 4 digits each.

3 = 0011

D = 1101

F = 1111

We then arrange the binary numbers in order

3DF base 16 = 1111011111 in base 2

We then convert to base 10 =

= 1x2^9+1x2^8+1x2^7+1x2^6+0x2^5+1x2^4+1x2^3+1x2^2+1×2^1+1×2^0

= 991 in base 10

Answer:

Explanation:

The following code is written in Java. It creates a loop within a loop that plays the game 10 times. As soon as the inner loop tosses a Heads (represented by 1) the inner loop breaks and the cost of that game is printed to the screen. A test case has been made and the output is shown in the attached image below.

import java.util.Random;

import java.util.Scanner;

class Brainly {

   public static void main(String[] args) {

       int count = 0;

       int loopCount = 0;

       while (loopCount < 10) {

           while (true) {

               Random rand = new Random();

               int coinFlip = rand.nextInt(2);

               count++;

               if (coinFlip == 1) {

                   System.out.println("Cost: $" + 2*count);

                   count = 0;

                   break;

               }

               loopCount++;

           }

       }

   }

}

Answer:

15

Inside the type declaration, you specify the maximum length the entry can be. For branch, it would be 15.

I can't seem to type the full "vc(15)" phrase because brainly won't let me.