The magnitude and direction of the resultant vector force, F, obtained by the vector addition of the two forces F1 and F2 with magnitudes of 30.0 N and 40.0 N, respectively, and an angle of 60 degrees between them, are F = 65.5 N and an angle of 33.3 degrees. Answer is Option b.
To solve this problem, we need to use vector addition. We can break down each force into its horizontal and vertical components using trigonometry, and then add the corresponding components together to get the components of the resultant vector. Finally, we can use the Pythagorean theorem and trigonometry to find the magnitude and direction of the resultant vector.
Using trigonometry, we find that the horizontal component of F1 is 15 N and the vertical component is 25.98 N. Similarly, the horizontal component of F2 is 20 N and the vertical component is 34.64 N.
Adding the horizontal components,
F_horizontal = 15 N + 20 N = 35 N
Adding the vertical components,
F_vertical = 25.98 N + 34.64 N = 60.62 N
Using the Pythagorean theorem, we can find the magnitude of F,
|F| = sqrt((35 N)^2 + (60.62 N)^2) = 65.5 N
To find the angle between F and the x-axis,
tan(theta) = F_vertical/F_horizontal
theta = atan(F_vertical/F_horizontal) = 33.3 degrees
Option b is the final answer.
To know more about the force, here
brainly.com/question/13191643
#SPJ4
(ii) two charged dust particles exert a force of 4.6 * 10-2 n on each other. what will be the force if they are moved so they are only one-eighth as far apart?
The force if they are moved so they are only one-eighth as far apart will be 2.688 N.
What is force?Objects' velocities can be changed by the concepts of thrust, drag, and torque.
Thrust causes an object to move faster, while torque causes an object to move slower.
Each part of an extended body typically exerts forces on its neighbouring sections; the internal mechanical stress in the body is the result of the distribution of these forces.
As the forces balance, the internal mechanical stresses have no effect on the body's acceleration.
The expression for the electric force is as follows,
F= kQ1Q2/r²
The new force between the dust particles after they moved.
F′ = kQ1Q2/(r/8)²
F′/F = {kQ1Q2/(r/8)²}/kQ1Q2/r²
F′/F = 1/(1/64)
F′ = 64F
Substitute 4.2×10⁻²N for F in the equation F′ =64F to find F1.
F′ =64(4.2×10⁻² N)
= 2.688 N
To know more about force, click the link given below:
https://brainly.com/question/13191643
#SPJ4
what does angular resolution measure? group of answer choices the angular size of the smallest features that the telescope can see the brightness of an image the size of an image the number of electromagnetic waves captured by an image
The Angular Resolution measures the (a) the angular size of the smallest features that the telescope can see .
The Angular resolution is defined as a measure of the ability of an imaging device, such as a telescope or a camera, to distinguish fine details in an image.
It is expressed as an angle and represents the smallest separation between two objects that can still be distinguished as separate by the imaging device.
The Angular Resolution of a telescope is limited by the size of its aperture, the wavelength of the light it is observing, and the quality of its optics.
A Telescope with a larger aperture and high-quality optics will typically have a higher angular resolution, allowing it to see smaller and finer details.
The given question is incomplete , the complete question is
What does angular resolution measure ?
(a) the angular size of the smallest features that the telescope can see
(b) the brightness of an image
(c) the size of an image
(d) the number of electromagnetic waves captured by an image .
Learn more about Angular Resolution here
https://brainly.com/question/25014179
#SPJ4
a 0.105-kg hockey puck moving at 29.0 m/s is caught and held by a 61.0 kg goalie at rest. with what speed does the goalie slide on the ice?
The goalie slides on the ice with the speed of 0.0498 m/s. The result is obtained by using the Law of Conservation of Momentum.
What is the Law of Conservation of Momentum?The Law of Conservation of Momentum states that the total momentum in a closed system before and after the collision is constant.
It can be expressed as
m₁v₁ + m₂v₂ + ... = m₁v₁' + m₂v₂' + ...
Where
m₁ and m₂ = mass of objectsv₁ and v₂ = initial speed of objectsv₁' and v₂' = final speed of objectsA 0.105-kg hockey puck moving at 29.0 m/s is caught and held by a 61.0 kg goalie at rest. Find the speed does the goalie slide on the ice!
We have
m₁ = 0.105 kgv₁ = 29.0 m/sm₂ = 61.0 kgv₂ = 0 (at rest)They are collided inelastically. The hockey puck eventually moves with the goalie at the same speed, v.
So,
m₁v₁ + m₂v₂ = (m₁ + m₂)v'
0.105(29) + 0 = (0.105 + 61.0)v'
3.045 = (61.105)v'
v' = 0.0498 m/s
Hence, the speed of the goalie sliding after holding the hockey puck is 0.0498 m/s.
Learn more about conservation of momentum here:
brainly.com/question/30432677
#SPJ4
a 15 pf capacitor is charged to 1 kv and then removed from the battery and connected in parallel to an uncharged 65 pf capacitor. what is the new charge on the second capacitor? answer in units of nc.
The new charge on the second capacitor when two capacitors are connected in parallel is calculated to be 611× 10⁻¹⁴ C.
The formula Q = C V = C E d describes the charge held in a capacitor.
where,
C is capacitance
V is the potential across the capacitor
E is the uniform electric field
d is the distance between the plates
The energy stored in a capacitor is given by,
U = 1/2 C V² = 1/2 Q²/C = 1/2 A ε₀ E² d
where,
C is the capacitance
V is the voltage
Q is the charge stored
A is the area of the plates
ε₀ is 8.85 × 10⁻¹² F/m is the permittivity free space
E is the electric field
d is the distance
C₁ is given as 15 × 10⁻¹² F
C₂ is given as 65 × 10⁻¹² F
V₁ is given as 5 × 10³ V
Initial charge on the first capacitor is,
Q' = C₁ V₁ = 15 × 10⁻¹² × 5 × 10³ = 75× 10⁻⁹ C
When two capacitors are connected together, the equivalent capacitance of the new system is,
C = C₁ + C₂ = 15 × 10⁻¹² + 65 × 10⁻¹² = 80 × 10⁻¹² F
Voltage for the new system is, V = Q'/C = (75× 10⁻⁹)/(80 × 10⁻¹²) = 9.4× 10⁻² V
Charge on the second capacitor is,
Q₂ = C₂ V = 65 × 10⁻¹² × 9.4× 10⁻² = 611× 10⁻¹⁴ C
To know more about charge:
https://brainly.com/question/27883618
#SPJ4
do you see any evidence that the coefficient of restitution depends on the intial velocity of the cart?
Newton's law of restitution is expressed in this formula. The restitution coefficient always fulfills 0e1. The balls continue to be in contact after the impact when e=0.
What is the height equivalent of the coefficient of restitution formula?The equation yields the coefficient of restitution. Speed increase/decrease is the Coefficient of Restitution. We had to use the average height that we measured and enter it into the calculation in order to calculate speed. v = √(2gh) (2gh) where v = speed, g = 9.8 m/s2, and h = measured average height.
What is the collision's coefficient of restitution?The coefficient of restitution is a value that ranges from 0 to 1. The difference between the velocity of two objects following a collision in a perfectly inelastic collision is zero because they things cling to one another.
To know more about initial velocity visit:-
https://brainly.com/question/20339740
#SPJ4
A 1 m spring requires 10 J to stretch the spring to 1. 1 m. How much work would it take to stretch the spring from 1 m to 1. 2 m
It would take 8 J of work to stretch the spring from 1 m to 1.2 m.
The work required to stretch a spring is given by the formula:
[tex]W = (1/2)kx^2,[/tex] where W is the work done, k is the spring constant, and x is the distance the spring is stretched or compressed.
Given that the spring requires 10 J of work to stretch from 1 m to 1.1 m, we can calculate the spring constant as follows:
[tex]10 J = (1/2)k(0.1 m)^2[/tex]
[tex]k = 200 J/m[/tex]
Using this spring constant, we can calculate the work required to stretch the spring from 1 m to 1.2 m:
[tex]W = (1/2)(200 J/m)(0.2 m)^2[/tex]
[tex]W = 8 J[/tex]
Therefore, it would take 8 J of work to stretch the spring from 1 m to 1.2 m.
To know more about Work, here
https://brainly.com/question/18094932
#SPJ4
erin walks 50.0 meters west in 60.0 seconds. she then walks 25.0 meters east in 40.0 seconds. what is her average velocity for the trip?
The average velocity for this trip is calculated by taking the total displacement (the difference between the final and initial positions) and dividing it by the total time.
In this case, the total displacement is 25 meters (50 meters west minus 25 meters east) and the total time is 100 seconds (60 seconds plus 40 seconds). Therefore, the average velocity for this trip is 0.25 meters per second.
Average velocity is a measure of the rate of change in an object's displacement over a period of time. It is calculated by dividing the change in an object's displacement by the time it took for the change to occur. Average velocity can be used to measure the speed of an object in a particular direction.
Learn more about average velocity:
https://brainly.com/question/26384204
#SPJ4
Answer: .250m/s
Explanation:
the distance from the sun is 93,000,000 miles and is called 1 au. what is the distance in miles to a star that is
The distance from star A to star B is about 3.999 billion miles.
AU stands for "astronomical unit". It is a unit of measurement used in astronomy and represents the average distance from the Earth to the Sun, which is about 93 million miles (or 149.6 million kilometers).
If the average distance from star A to star B is 43 AU, then we can find the distance in miles by multiplying 43 by the distance of 1 AU from the sun, which is about 93 million miles:
Distance from star A to star B = 43 x 93,000,000 miles
Distance from star A to star B = 3,999,000,000 miles
Therefore, the distance from star A to star B is about 3.999 billion miles (or 3.999 x 10^9 miles).
To know more about the astronomical unit, here
brainly.com/question/28710024
#SPJ4
--The complete question is, The distance from Earth to the sun is defined as 1 astronomical unit, or AU. It is about 93 million miles, The average distance from star A to star B is 43AUs.
Find this distance in miles.--
You are running with a carry-on suitcase through the airport. Where should the center-of-mass of the suitcase ideally be located
The center of mass is usually near the middle of the suitcase and about halfway up its height and at a height that allows you to maintain good balance and control while running.
For a carry-on suitcase,. Keeping the center of mass low and close to your body can help reduce the amount of effort required to carry the suitcase, as well as improve stability and control while running.
When running with a suitcase, it's important to keep your upper body as upright and relaxed as possible, while allowing your legs and arms to move freely. This will help you maintain balance and reduce the strain on your muscles and joints. Additionally, it's helpful to grip the handle of the suitcase firmly, but not too tightly, so that you have control over its movement.
To learn more about Center of mass :
https://brainly.com/question/30389896
#SPJ4
derive an expression for the force experienced by a conductor carrying current when placed in a uniform magnetic field.
a spring requires a force of 3 n to stretch to 20 cm beyond its original length. the amount of work required to stretch the spring to 40 cm beyond its original length is
The amount of work required to stretch the spring to 40 cm beyond its original length is 5333 J.
Spring is defined as an elastic object which gets deformed from its original shape when an external force is applied to it and again reverts back to its original shape when the external force is removed. When a force is placed on a material, the material stretches or compresses in response to the force. The length of the extension is directly proportional to the amount of force applied to it. Hence more the extension more the force is applied. Force and stretch are proportional to one another such that if you double the force applied, the amount of stretching of the spring will also be double. F 1 =kx 1, 3=k×20. This spring constant k= 20/3 N/m. Now, W= ½ k x^2 =1/2×20/3×40×40= 5333 J.
For further learning about spring force, refer to the link: https://brainly.com/question/16158585
#SPJ4
an elevator suspended by a cable is descending at constant velocity.part ahow many force vectors would be shown on a free-body diagram?how many force vectors would be shown on a free-body diagram?012345
Two force vectors would be shown on a free-body diagram for an elevator descending at a constant velocity: the gravitational force and the tension force in the cable.
What are the forces of the free body diagram?In a free-body diagram, the forces acting on an object are represented as vectors pointing in the direction that the force is acting. When an elevator is suspended by a cable and is descending at a constant velocity, there are two main forces acting on the elevator:
gravity and tension.Gravity is a force that acts downward on all objects and is equal to the mass of the object times the acceleration due to gravity (g). The force of gravity on an elevator can be represented as a downward-pointing vector.
The tension in the cable is the force exerted by the cable on the elevator that opposes the force of gravity. This force can be represented as an upward-pointing vector.
Learn more about free body diagram here: https://brainly.com/question/21691401
#SPJ1
which telescope has better resolution? group of answer choices the very large array which observes radio waves and has a diffraction limit of 1.5 arcseconds. the hubble space telescope which observes visible light and has a diffraction limit of 0.05 arcseconds.
The diffraction limit of the visible light observatory Hubble Space Telescope is 0.05 arcseconds.
What restricts a telescope's natural resolution?telescopic seeing. The lowest angle between close objects that can be seen to be distinctly separate is the telescope's angular resolving power (or resolution). The fact that light is a wave limits resolution.
Which telescope from the list below would have the worst angular resolution?Because radio waves have a significantly longer wavelength than optical waves, radio telescopes have a lower angular resolution than optical telescopes. In terms of design, all radio telescopes are reflectors.
To know more about arcseconds visit:
https://brainly.com/question/30506515
#SPJ4
two tuning forks are sounded at the same time. which tuning forks will give rise to a beat frequency of 20 hz 20 hz when sounded together with a 240 hz 240 hz tuning fork?
The tuning forks will give rise to a beat frequency are 220 Hz and 260 Hz.
Tuning forks are available in a wide range of frequencies (64 Hz to 4096 Hz); 128 Hz is a commonly used frequency for screening.
Beat frequency formed by the tuning fork is given by: [tex]f_{beat} = f_1 \pm f_2[/tex].
Here, the beat frequency, [tex]f_{beat} = 20 Hz[/tex].
The frequency of a tuning fork, [tex]f_2 = 270\ Hz[/tex].
If [tex]f_{beat} = f_1 + f_2[/tex],
[tex]f_1 = 20-240[/tex]
[tex]f_1 = 220\ Hz[/tex]
If [tex]f_{beat} = f_1 - f_2[/tex],
[tex]f_1 = 20+240[/tex]
[tex]f_1 = 260\ Hz[/tex]
So, the tuning forks will give rise to a beat frequency are 220 Hz and 260 Hz. Hence, this is the required solution.
To know more about the tuning forks, here
brainly.com/question/11811308
#SPJ4
--The complete question is, Two tuning forks are sounded at the same time. which tuning forks will give rise to a beat frequency of 20 hz when sounded together with a 240 hz tuning fork?--
what is the classical momentum pclass(t) for this classical particle? find an expression for ! such that
In classical physics, an object's momentum is calculated by multiplying its mass by its speed.
How do classical and relativistic momentum differ from one another?
Relativistic momentum is the same as classical momentum at slow speeds. As u moves closer to c, relativistic momentum grows infinitely large. This suggests that a mass-containing item cannot travel at the speed of light. As with classical momentum, relativistic momentum is conserved.
The two types of momentum are linear momentum and angular momentum. The three different types of inertia are inertia at rest, inertia in motion, and inertia in direction. Mass and speed are factors in momentum. An object moving with a velocity has linear momentum, but a spinning object has angular momentum.
To learn more about momentum use link below:
https://brainly.com/question/1042017
#SPJ4
determine how much impulse is needed bowling barry to stop a 10- kg bowling ball moving at 7.0 m/s .
The impulse required to stop the 10-kg bowling ball moving at 7.0 m/s is -70 kg m/s.
The impulse required to stop a moving object can be calculated using the principle of momentum conservation.
The formula for impulse can be given as:
I = Δp = mΔv
where I is the impulse, Δp is the change in momentum, m is the mass of the object, and Δv is the change in velocity.
In this case, the initial velocity of the 10-kg bowling ball is 7.0 m/s and it needs to be brought to a stop, so its final velocity is 0 m/s.
Therefore, the change in velocity can be given as:
Δv = vf - vi = 0 - 7.0 m/s = -7.0 m/s
Substituting the values in the formula for impulse, we get:
I = Δp = mΔv = 10 kg × -7.0 m/s = -70 kg m/s
So, the impulse required to stop the 10-kg bowling ball moving at 7.0 m/s is -70 kg m/s. The negative sign indicates that the impulse is acting in the opposite direction to the velocity of the ball.
To know more about initial velocity here
https://brainly.com/question/9365999
#SPJ4
perform a kline-mcclintock uncertainty analysis on the pump power calculation. what is the uncertainty of the pump power measurement in watt?
The Kline-McClintock uncertainty analysis is used to estimate the uncertainty associated with measurements of power output from a pump. The uncertainty is usually determined by analyzing the errors associated with the measurements taken and the accuracy of the equipment used.
The uncertainty of the pump power measurement in watt will depend on the accuracy of the measurements, the precision of the instruments used, and the degree of accuracy of the calculations. Generally, the uncertainty of the pump power measurement in watt can be estimated as the combined standard deviation of all measurement errors.
Learn more about kline-mcclintock uncertainty analysis:
https://brainly.com/question/3998745
#SPJ4
can a vector have a component equal to zero and still have nonzero magnitude? match the words in the left column to the appropriate blanks in the sentences on the right.
The statements stands true. A vector have a component which is equal to zero and still have nonzero magnitude.
In a 2-D plane a vector can be resolved into the rectangular components. These are rectangular components to each other. These are available at right angles to each other. One component is directed along x-axis. It is the termed as horizontal component. The other one is directed along y-axis. Is termed as vertical component.
Sometimes, the vector is directed entirely either along x-axis or y-axis. When the vector is along x-axis or parallel to x-axis, then the complete magnitude will be directed along horizontal component. The vertical component will be zero. For a vector which is along y-axis, the horizontal component will be zero. The entire magnitude will be along y-axis.
Learn more about vector:
brainly.com/question/29740341
#SPJ4
what is the frequency of the sound wave that a bicyclist hears if she is approaching the bagpiper at 10.0 m/s ?
As a result, the sound wave's frequency and wavelength are 440 Hz and 5.4 m, respectively, for a bike traveling at either 10.0 m/s toward the bagpiper or away from him.
How does frequency mean?The quantity of waves passing a fixed place in a unit of time is known as the frequency in physics. A body undergoing periodic motion undergoes how many cycles or vibrations in one unit of time, according to this definition.
Does frequency equate to energy?They have a relationship between frequency and amplitude and the quantity of energy they transport. Energy is inversely correlated with frequency and amplitude, increasing with higher frequency.
To know more about frequency visit:
https://brainly.com/question/2140860
#SPJ4
A spaceship hovering over the surface of Venus drops an object from a height of 24 m. How much longer does it take to reach the surface than if dropped from the same height on Earth? Neglect air resistance in both cases. [The acceleration due to gravity on Venus is 90.7% of that on Earth,
gVenus = (0.907)g.]
The time taken is 2.3s for a spaceship hovering over the surface of Venus to drop an object from a height of 24m, and 2.21s for the same spaceship hovering over the surface of Earth to drop an object from the same height.
What is the time taken?To solve this problem, we will use the motion equation to calculate the time of flight of an object on the surface of Venus and the Earth. The height is related by the following equation of motion:
h = v₀t + gt²/2
Because the object's initial velocity before dropping is zero, we can simplify the equation to:
h = gt²/2
We know the height h of the spaceship hovering, and Venus's gravity is g = 9.07m/s². Substituting the following values into the equation:
24m = (9.07 m/s²t²)/2
To calculate the time it takes an object dropped by a spaceship hovering from a height of 24m to reach the surface of Venus, we must remove t from the equation above, yielding:
t = [tex]\sqrt{2(24m)/9.07m/s^{2} }[/tex]
= [tex]\sqrt{48m/9.07m/s^{2} }[/tex]
= 2.3s
Similarly, to calculate the time it takes an object dropped from a height of 24m to reach the Earth's surface, and the gravity of the Earth is g = 9.81m/s² .
t = [tex]\sqrt{2(24m)/9.81m/s^{2} }[/tex]
= [tex]\sqrt{48/9.81m/s^{2} }[/tex]
= 2.21s
To learn more about time taken refer to :
https://brainly.com/question/12724779
#SPJ1
On a banked race track, the smallest circular path on which cars can move has a radius of 101 m, while the largest has a radius 159 m, as the drawing illustrates. The height of the outer wall is 18 m.
(a) Find the smallest speed at which cars can move on this track without relying on friction.
(b) Find the largest speed at which cars can move on this track without relying on friction.
The smallest speed at which cars can move on this track without relying on friction is 31.46 m/s.
The largest speed at which cars can move on this track without relying on friction is 39.10 m/s.
What is centripetal acceleration?An attribute of an object moving in a circular route is centripetal acceleration. Any object moving in a circle with an acceleration vector pointing in the direction of the circle's center is said to be experiencing centripetal acceleration.
a) The smallest speed at which cars can move on this track without relying on friction is = √(gr₁)
= √(9.8 × 101) m/s
= 31.46 m/s.
b) The largest speed at which cars can move on this track without relying on friction is = √(gr₂)
= √(9.8 × 159) m/s
= 39.10 m/s.
Learn more about centripetal acceleration here:
https://brainly.com/question/14465119
#SPJ1
compute the propulsive efficiency and specific thrust for a turbojet engine with an exhaust velocity of 450 m/s, an air mass flow rate of 250 kg/s, an exit area of 2 m2, and an exit pressure of 35,000 pa if the aircraft is flying at 200 m/s at an ambient pressure of 30,000 pa. the fuel fraction is 2.0%.
The propulsive efficiency of the turbojet engine is approximately 12,500 N/kg/s and the specific thrust is approximately 250 N/kg/s.
The propulsive efficiency of a turbojet engine is defined as the ratio of the net thrust produced by the engine to the rate of energy supplied to the engine. The specific thrust is defined as the net thrust per unit mass flow rate of the engine.
To calculate these parameters, we need to determine the net thrust produced by the engine. This can be calculated using the equation:
Thrust = (V_e - V_0) × m_air + (p_e - p_0) × A_e
where V_e is the exhaust velocity, m_air is the air mass flow rate, V_0 is the velocity of the aircraft, p_e is the exit pressure, p_0 is the ambient pressure, and A_e is the exit area.
Substituting the given values, we get:
Thrust = (450 m/s - 200 m/s) × 250 kg/s + (35,000 Pa - 30,000 Pa) × 2 m^2 = (250 kg/s)(250 m/s) = 62500 N
The propulsive efficiency is given by:
η = net thrust / (fuel consumption rate) = 62500 N / (250 kg/s × 2.0%) = 62500 N / (250 kg/s × 0.02) = 62500 N / 5 kg/s = 12500 N/kg/s
The specific thrust is given by:
T_sp = net thrust / air mass flow rate = 62500 N / 250 kg/s = 250 N/kg/s
Therefore, the propulsive efficiency of the turbojet engine is approximately 12,500 N/kg/s and the specific thrust is approximately 250 N/kg/s.
Learn more about thrust:
brainly.com/question/26712174
#SPJ4
What type of friction is the force between two moving surfaces
It is known as a force that acts between moving surfaces as kinetic friction. The movement of a body on the surface is opposed by a force that is perceived.
What causes two moving surfaces to friction?There may still be friction between the surfaces even when they are moving past one another; this sliding friction is known as a kinetic frictional force.
Between two surfaces, what force exists?Friction is a force that exists between two surfaces that are sliding or attempting to slide over one another. As an illustration, friction makes it difficult to push a book over the floor. An object is always moved by friction in the opposite direction from where it is moving or trying to move.
To know more about kinetic friction visit:-
https://brainly.com/question/17237604
#SPJ4
explain how a converging lens could be used to ignite a piece of carbon paper
A converging lens, also known as a positive lens, is a type of lens that has the ability to focus light rays to a single point, known as the focal point. This property can be utilized to ignite a piece of carbon paper.
When using a converging lens to burn carbon paper, care must be taken to position the lens such that sunlight (or another light source) is focused on the paper. As the light is focused, its intensity rises until it eventually reaches a temperature high enough to burn the carbon paper. The lens serves as a magnifying glass in this process, focusing the light beams onto a pinpoint area of the carbon paper and creating heat that eventually ignites the paper.
The size and temperature of the point of ignition will depend on the lens's distance from the paper, its size, and the angle at which the light rays are directed. The "fire by reflection" or "camera obscura" principle refers to this phenomenon. The principle of refraction, which asserts that light changes direction as it passes through various media with differing refractive indices, can be demonstrated in this way.
It is feasible to create a concentrated point of heat hot enough to ignite the carbon paper by employing a converging lens to focus the light.
Learn more about lenses here:
https://brainly.com/question/9757866
you throw a ball straight up with an initial velocity of 15.0 m/s. it passes a tree branch on the way up at a height of 7.0 m. how much additional time elapses before the ball passes the tree branch on the way back down?
This individual launches a ball upward at a 15 meter per second beginning speed. We'll assume that the ball is held in the guy's mouth at beginning height zero meters.
What is the speed measurement unit?
Units of speed include nautical miles per hour (kn or kt), feet per minute (symbol fps or ft/s), kilometers per hour (symbol km/h), miles an hour (symbol km in or mph), and metres per moment (symbol μ s 1 or m/s), the SI-derived unit. Speed multiplied by the sound speed is known as the dimensionless Mach number;
What does speed have a shorthand for?
L T-1. The parameters of speed are time divided by distance. The most often used measure of speed in daily life is the kilometer per hour, or miles per hour in the United States and the UK. The Si derived unit of velocity is the meter per second.
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ4
two charges, each of magnitude 4.02 c, are placed at the ends of a meter stick. find the electric potential (relative to infinity) at the 39.7 cm mark of the meter stick.
At the 39.7 cm mark on the meter stick, the electric potential (relative to infinity) is -140.74 x 106 V.
What does "electric potential" mean?Electric potential is the effort required to transport an units charge from one place to another in the presence of an electric field. Earth is typically chosen as the reference point, but any location outside the range of the applied electric charge can be used. potential electricity.
Let the negative charge be located at the left end of the meter stick and the positive charge at the right end. E = kq / x2, where k is the Coulomb constant (8.99 x 109 Nm2/C2) and q seems to be the charge at the left end of the meter stick, can be used to calculate the electric field at a location x cm from the left end of the meter stick (4.02 C).
The following equation can be applied to compute the electrical potential difference seen between left end of the meter stick & infinity:
ΔV left = -kq / d = -kq / 100 cm = -kq / 0.01 m = -8.99 x 10^9 Nm^2/C^2 * 4.02 C / 0.01 m = -359.57 x 10^6 V
Similarly, the electric potential difference between the right end of the meter stick and infinity can be calculated as:
ΔV right = kq / d = kq / 100 cm = kq / 0.01 m = 8.99 x 10^9 Nm^2/C^2 * 4.02 C / 0.01 m = 359.57 x 10^6 V
The total electric potential difference between the 39.7 cm mark and infinity can then be calculated as:
ΔV_total = ΔV_left + ΔV_right * (100 cm - 39.7 cm) / 100 cm = -359.57 x 10^6 V + 359.57 x 10^6 V * (100 cm - 39.7 cm) / 100 cm = -359.57 x 10^6 V + 218.83 x 10^6 V = -140.74 x 10^6 V
Therefore, the electric potential (V) at the 39.7 cm mark relative to infinity can be calculated as:
V = ΔV_total = -140.74 x 10^6 V
To know more about electric potential visit :
https://brainly.com/question/28444459
#SPJ4
what is the direction of the electric field at the position indicated by the dot in the figure? specify the direction as an angle above the horizontal line.
The direction of the electric field at the position indicated by the dot in the figure can be specified as an angle above the horizontal line. The angle is determined by the direction of the electric field vector at that point, which can be determined using the right-hand rule.
The direction of the electric field is determined by the sign of the charge, which is responsible for creating the field. Positive charges create an electric field that extends outward from them, while negative charges create an electric field that extends inward towards them. Additionally, the direction of the electric field is the same as the direction of the force it would exert on a positive test charge.
Learn more about direction of the electric field :
https://brainly.com/question/12388474
#SPJ4
A baby carriage is sitting at the top of a hill that is 21 m high. The carriage with the baby has a mass of the carriage has__ energy. Calculate it.
The required energy the carriage has, when the displacement of the carriage and mass of the carriage with the baby are given is calculated to be 1029 J.
The energy in the above case is nothing but the work done by the carriage.
The work is defined as,
W = F d
where,
F is force
d is displacement
Entering the values in the above equation, we have,
W = F d = m × a × d = 5 × 9.8 × 21 = 1029 J
Thus, the required energy the carriage has is calculated to be 1029 J.
The given question is inappropriate. The question is 'a baby carriage is sitting at the top of a hill that is 21 m high. The carriage with the baby has a mass of 5kg whats the energy the carriage has?'
To know more about energy:
https://brainly.com/question/30190398
#SPJ4
A 0. 5 kg block of playdough moving at 1. 5 m/s is smashed into a 0. 25 kg blob of playdough. Calculate the speed
of the two stuck-together blobs immediately after colliding.
The final speed of both play doughs which stick together after the collision is 0.5 m/s.
The mass of the first play dough = 0.5 kg
The mass of the second play dough = 0.25 kg
The initial speed of the first play dough = 1.5 m/s
The initial speed of the second play dough = 2 m/s
The final speed of both play doughs can be found using the formula,
m₁u₁ + m₂u₂ = (m₁ + m₂) v
where,
m₁,m₂ is the mass of the first and second play dough respectively
u₁,u₂ is the initial speed of the first and second play dough respectively
v is the final speed of both play dough
Let us enter the known values in the above equation,
0.5 × 1.5 + 0.25 × 2 = (0.5 + 0.25) v
0.75 × 0.5 = 0.75v
0.375 = 0.75v
v = 0.375 / 0.75 = 0.5 m/s
The given question is incomplete. The complete question is ' The speed of the bob of the pay dough is 2 m/s.'
To know more about collisions:
https://brainly.com/question/30129196
#SPJ4
Which object has the most momentum? (I don’t need work just the answer)
Answer: I don't know sorry
Explanation:
yeah
Answer:
Z
Explanation:
Momentum = mass * velocity
Z has the highest mass * velocity = 15 * 3 = 45 kg m/s