The weight of a person increase when the elevator is going up.
Weight of the person in the elevator
The weight of the person in the elevator is calculated as follows;
When the person is going upF = ma + mg
F = m(a + g)
where;
a is acceleration of the persong is acceleration due to gravityWhen the person is going downF = mg - ma
F = m(g - a)
Thus, the weight of a person increase when the elevator is going up.
Learn more about weight here: https://brainly.com/question/2337612
#SPJ1
a 415-kg container of food and water is dropped from a airplane
Since the object is experiencing free fall, if you ignore air resistance, the time it will take the container to fall 300m to the ground is 7.82 seconds.
What is free fall?Any motion of a body in which gravity is the only force acting on it is referred to as free fall.
The object dropped from the airplane is experiencing free fall.
Ignoring air resistance, the only force acting on the container is the force of gravity which accelerate the container by a constant value.
The time taken for the object to reach the ground is determined using the formula of an object experiencing free fall as given below:
s = ut + ¹/₂gt²
where
h is the height above the ground = 300 m
u is the initial vertical velocity of the container and is equal to zero since the object starts from rest.
g is the acceleration of gravity = 9.8 m/s²
t is the time = ?
The equation above becomes;
h = ¹/₂gt² since u is zero
Solving the equation for t:
t = √2h/g
t = √2 * 300 / 9.8
t = 7.82 seconds.
Learn more about free fall at: https://brainly.com/question/12167131
#SPJ1
Complete question:
A 415-kg container of food and water is dropped from an airplane at an altitude of 300m. First, consider the situation ignoring air resistance. Then calculate the more realistic situation involving a drag force provided by a parachute.
1. If you ignore air resistance, how long will it take the container to fall 300m to the ground?
8. A penny dropped into a wishing well
reaches the bottom in 1.50 seconds. How
deep was the well?
Answer: 11 meters
Explanation: i'm rlly sorry if i am wrong
HELP PLEASE HELP PLEASE
An advantage of electromagnets over bar magnets is that you can easily vary the __________ of the magnetic field. What word completes this sentence?.
An advantage of electromagnets over bar magnets is that you can easily vary the strength of the magnetic field.
What is electromagnets?An electromagnet is a type of magnet that is created when an electric current passes through a coil of wire. It produces a magnetic field due to the current flowing through the coil. Electromagnets are used in a wide variety of applications, such as motors, generators, speakers, and magnetic separation equipment. Electromagnets have the advantage of being able to be switched on or off, which allows them to be used in a controlled manner. They are also able to be adjusted in strength, which makes them very versatile and powerful. Electromagnets are also used in magnetic resonance imaging (MRI) machines, where they create a magnetic field that is used to take images of the body's internal structures.
To learn more about electromagnets
https://brainly.com/question/13516323
#SPJ4
A person pulls a sled along a flat snowy surface, dragging it with a rope. The rope makes a 20-degree angle with the ground. How much work does the person do on the sled if she drags it for 125 meters with a force of 70 N?
The person will do 8222.3 Joules of work on the sled if she drags it.
What does "work" mean in physics?Work is a physics term used to describe the energy transfer that takes place when an object is moved over a distance by an external force, at least some of that is applied in the direction of the displacement.
Given, angle made by the rope θ = 20°
displacement, s = 125m
force, F = 70N
Positive work is done by the force's displacement-direction component.
W = Fcosθ.s
W = 70N(cos20°)125m.
W = 8222.3 Joules
Since it is perpendicular to the distance, the force's vertical component does NOTHING. In other words, it is ineffective at moving the sled. Since it is the horizontal component of the force that moves the object, it is effective.
The person will do 8222.3 Joules of work on the sled if she drags it.
To know more about Work visit
https://brainly.com/question/18094932
#SPJ1
A 1,500 kg satellite is in orbit around Earth at a distance of 1 Earth radius above the surface.
Earth's mass is 5.97 x 1024 kg, and its radius is 6.37 x 106 m.
Calculate the magnitude of the gravitational force acting on the satellite.
The magnitude of the gravitational force acting on the satellite is 3.16 x 10^22 N.
How calculate the gravitational force?The gravitational force between two objects can be calculated using Newton's Law of Universal Gravitation: F = G * (m1 * m2) / r^2, where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers.
To calculate the gravitational force acting on the satellite, we need to know the mass of the satellite (m1) and the distance between the center of Earth (m2) and the center of the satellite (r).
The mass of the satellite is given as 1,500 kg
The distance between the center of Earth and the center of the satellite is the distance from the surface of Earth to the satellite + the radius of Earth:
r = (1 Earth radius + 6.37 x 106 m)
We can use the given information to calculate the force of gravity acting on the satellite:
F = G * (m1 * m2) / r^2
F = (6.67 x 10^-11 N*(m^2)/(kg^2)) * (1,500 kg * 5.97 x 1024 kg) / (6.37 x 106 m + 6.37 x 106 m)^2
F = 3.16 x 10^22 N
The magnitude of the gravitational force acting on the satellite is 3.16 x 10^22 N.
Learn more about gravitational force in brainly.com/question/12528243
#SPJ1
Answer:
3,700 N
Explanation:
Someone already explained it, but didn't give an answer that can be put into khan academy.
Define Tension in a string?
Answer:
Tension is the pulling force transmitted axially by the means of a string, a rope, chain, or similar object, or by each end of a rod, truss member, or similar three-dimensional object; tension might also be described as the action-reaction pair of forces acting at each end of said elements
Recently, I did an experiment on pressure and volume. When I decreased the volume, the pressure decreased, and when I increased the volume, the pressure decreased, like normal. However, when increasing the volume, the pressure recorded was slightly higher than when decreasing the volume. What is the reason for this (I'm sorry for being unable to attach a photo of the results)
When is there a decrease in air pressure on top of a plane's wing?
A)as the plane's speed decreases
B)as the plane's fuel runs low
C)as the plane's speed increases
Answer: Option C.
Explanation:
As the speed of plane increases and it moves forward it allows to push air on the bottom of the wings of the plane which results in increasing the pressure
The fact of air pressure on top of planes wing decreases with the increase bin plane's speed is based on Bernoulli’s Principle which states that with the fast moving air, the pressure decreases.
Therefore,n when the plane moves up it's wing pushes air down and on the same time the air pressure decreases at the top of the wing, this difference between the high and low pressure allows the flight to lift up.
Hence, the correct option is C.
If you apply a force of 10 n to a box and push it 10 m in 10 s, how much power did you deliver?.
According to the given statement 10W power did you deliver.
What is power?Power is the rate at which energy is transferred, transformed, or converted. It is a measure of the amount of work that can be done in a given amount of time. In physics, power is the product of the time rate of change of energy, or the rate of doing work. Power is measured in watts or joules per second (J/s). It is an important concept in many fields, such as mechanics, thermodynamics, electromagnetism, and nuclear physics. It is also used to measure the capacity of machines, devices, and systems to perform work.
Force=10N
Distance =10m
Time=10s
Power =?
But Power= Work done/Time taken
P= W/s
W= F x d=10x10=100
P=100/10
P=10W
To learn more about Power visit:
brainly.com/question/25864308
#SPJ4
How is a "viscous fluid" different from a "liquid"?
Answer: A viscous fluid is thicker and more difficult to pour than a typical liquid, while a liquid is a substance that has a definite volume but no fixed shape and can flow to conform to the shape of its container. ✅
PLEASEEEE GIVE BRANLIEST
Silver has a resistivity of 1.6 x 10
m. If you make a silver wire that's 10
m long with an area of 3 x 10-6 m², what is the wire's resistance? (4 points)
Explanation:
click on the image and thats your answer
A 4-kg toy car travels 3m/s. What’s it’s KE? What would be it KE if we doubled its velocity? How about tripled?
The kinetic energy of toy car is 18J. When it's velocity doubled, K.E is 72J and it's velocity tripled, then K.E is 162J.
Why is kinetic energy inversely associated with velocity?A moving object's kinetic energy is inversely proportional to its mass and to the square of its velocity. Similarly, an objects with equivalent mass and speed will have double the kinetic energy as one with double the mass and speed will have four times the kinetic energy.
Kinetic energy(K.E) = 1/2 mv^2
Mass of toy = 4Kg
V= 3m/s
K.E => 1/2 x 4 x 3^2
=> 18J
If velocity doubled, which means the new velocity = 6m/s
K.E => 1/2 x 4 x 6^2
=> 72J
If velocity tripled, which means the new velocity = 9m/s
K.E => 1/2 x 4 x 9^2
=> 162J
Learn more about velocity here:
brainly.com/question/19309255
#SPJ1
A plane intersects one nappe of a double-napped cone such that it is perpendicular to the vertical axis of the cone. Which conic section is formed?.
Answer:
Hyperbola
Explanation:
Hyperbola: When the plane intersects the double napped cone such that the angle between the vertex and the angle is less than the vertex angle, the resulting conic section in the form of an open curve is called a hyperbola.
Lations, some variation of the question "s/decimals do I have to include in my mes up. By converting all of your numbers on you will always have 3 significant digits in You can choose to rep in standard notation, ju are included.
Perform the following calculations and report your answer with three
101,455,348 - 1,111,419 = 91300000000000
0.000000612 X 0.00031119 = 1.9e-10
297,060 + 0.0004839 = 61400000000
The following calculations in standard notation is 9.13[tex]e_{1}[/tex], 1.90[tex]e^{-10}[/tex], 6.14[tex]e^{8}[/tex].
A standard form of a number in maths is basically mentioned for the representation of large numbers or small numbers. We use exponents to represent such numbers in standard form.
Write the first number from the given number. Add the decimal point after the first number. Now, count the number of digits after the first number from the given number and write it in the power of 10.The following calculations and report your answer with three
101,455,348 ÷ 1,111,419 =91.28452
=91.28452 ( in real numbers)
=9.13×[tex]10^{1}[/tex] (Scientific notation)
=9.13[tex]e^{1}[/tex]
Therefore, the answer is 9.13[tex]e_{1}[/tex].
(ii). 0.000000612 × 0.00031119 = 0.000000000190
=0.000000000190 ( in real numbers)
=1.90×[tex]10^{-10}[/tex] (in scientific notation)
=1.90[tex]e^{-10}[/tex]
Therefore, the answer is 1.90[tex]e^{-10}[/tex].
(iii). 297,060 + 0.0004839 =613900000
=613900000 ( in real numbers)
=6.14×[tex]10^{8}[/tex] (in scientific notation)
=6.14[tex]e^{8}[/tex]
Therefore, the answer is 6.14[tex]e^{8}[/tex].
For more such questions on standard notations
https://brainly.com/question/10253124
#SPJ4
A 2 kg book is sitting on a table. A 10 n force is pulling to the right. A 3 n force is pulling to the left. What is the net force acting on the book?.
The net force acting on the book is 7N right.
The net force is defined as the total of all forces exerted on an object. Net force is essential since it aids in describing the motion of an item and can be used to calculate acceleration. The first law of motion of Isaac Newton states that an object in motion will remain in motion and an object at rest will remain at rest unless acted upon by a net force that is imbalanced. This indicates that knowing the net force acting on an object will aid in predicting its velocity.
In this case, we are given that:
Force F1 = 10 N pulling to the right
Force F2 = 3 N pulling to the left
Let's assume the right is positive and the left is negative.
To calculate the net force, we can use this following formula:
Fnet = F1 + F2
Fnet = 10 + (-3)
Fnet = 7
As the result, the net force would be 7 N.
To learn more about net force, click here:
https://brainly.com/question/13051854
#SPJ4
What is the difference between a physical and chemical change ?
Answer:
In a physical change the appearance or form of the matter changes but the kind of matter in the substance does not.
However in a chemical change, the kind of matter changes and at least one new substance with new properties is formed.
Hope this helps :)
233kg car is traveling at 12 m/s what is kinetic energy of the car ?
Answer: 33,992 J (Joules)
Explanation:
The kinetic energy of an object is the energy it possesses due to its motion. The formula for kinetic energy is: Kinetic energy = 1/2 x mass x velocity^2
So, for a 233 kg car traveling at 12 m/s, the kinetic energy can be calculated as:
Kinetic energy = 1/2 x 233 kg x (12 m/s)^2
= 1/2 x 233 kg x 144 m^2/s^2
= 33,992 J (Joules)
It is important to note that the unit of energy is Joules (J).
In this case, the car has 33,992 Joules of kinetic energy. This energy represents the ability of the car to do work, such as causing damage if it collides with an object, or to overcome a force such as friction or air resistance. Kinetic energy increases with the mass of the object and the square of its velocity.
The motion of an object moving with uniform circular motion is always to the circle, so the speed of an object moving in a circle is known as speed.
The motion of an object moving with uniform circular motion is always tangent to the circle, so the speed of an object moving in a circle is known as the tangential speed..
Uniform circular motion is the motion of an object in a circular path with a constant speed and the direction of velocity is perpendicular to the direction of acceleration. Examples of objects that experience uniform circular motion are wheels and clockwise motion where these objects have a constant linear speed, constant angular velocity, and constant centripetal acceleration. The speed in the circular motion of the object is also called the tangential speed where the object is moving in a circle in the direction of offending its spin path.
Centripetal acceleration is the acceleration directed towards the center of the circle. this centripetal acceleration that makes the wheel and clockwork move in a circle because they are accelerating towards the center of the circle.
Learn more about centripetal acceleration at:
https://brainly.com/question/14465119
#SPJ4
A pool cue ball moving at 2.1 m/s east collides in a straight line with the eight ball at rest. (You may assume that the cue ball and the eight ball have the same mass.) Find the velocity of the eight ball after the collision if momentum is conserved and
the cue ball stops
the cue ball continues on in the same direction at 0.10 m/s
the cue ball continues on in the same direction at 0.70 m/s.
1. 2.1 m/s west.
2. 2.0 m/s west.
3. 1.4 m/s west.
Momentum is a conserved quantity, meaning that it is neither created nor destroyed. This means that the total momentum of the system (cue ball and eight ball) before and after the collision must stay the same. After the collision, the momentum of the system is equal to the momentum of the eight ball alone since the cue ball no longer has momentum after it stops (for option 1) or has a different momentum depending on its speed (for options 2 and 3).
Since momentum is mass times velocity, we can solve for the velocity of the eight ball by rearranging this equation:
Momentum = Mass x Velocity
Velocity = Momentum / Mass
Plugging in the given values:
1. Velocity = (2.1 m/s east) / (mass of both balls) = 2.1 m/s west
2. Velocity = (2.1 m/s east + 0.10 m/s east) / (mass of both balls) = 1.9 m/s west
3. Velocity = (2.1 m/s east + 0.70 m/s east) / (mass of both balls) = 1.4 m/s west
Question 3 of 5
The gravitational pull of the Moon is much less than the
gravitational pull of Earth.
Which two statements are true for an object with a mass of 20 kilograms that
weighs 44 pounds on Earth?
A. The object's mass would be less on the Moon.
B. The object's mass would be the same on the Moon.
C. The object's weight would be the same on the Moon.
D. The object's weight would be less on the Moon.
Answer:
Number b and c are true
B. The object's mass would be the same on the Moon.
C. The object's weight would be the same on the Moon.
If a negatively charged rod is held near an uncharged metal ball, the metal ball?1. becomes positively charged.2. becomes negatively charged.3. Unable to determine.4. is unaffected.5. becomes polar.
The correct option is 2 because The negatively charged rod will induce a small amount of negative charge on the surface of the uncharged metal ball, causing a force of attraction between the two.
Is Earth positively or negatively charged?Although Earth is electrically neutral, its interior and crust each have a different charge. In clouds, the top face is negatively charged while the bottom face is positively charged.
Lightning has a negative charge, right?About 90 to 95 percent of all lightning that you ever witness is negative lightning, which occurs when an ions is transported from a cloud to the ground. Positive lightning, on the other hand, occurs as a result of the positive charge that accumulates at the cloud's top.
To know more about Negatively charged visit:
https://brainly.com/question/7439274
#SPJ4
A 0.50 kg mass is attached to a string 1.2 m long and moves in a horizontal circle completing 5 revolution in 1.5 seconds. Calculate:
a) the centripetal acceleration of the mass.
b) the tension in the string.
a) The centripetal acceleration of the mass is 526.38 m/s².
b) The tension in the string is 263.19 N.
What is centripetal acceleration?Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.
Angular speed of the mass = (5/1.5) revolution per second
= (5 ×2π)/1.5 rad/s
= 20.94 rad/s
a) the centripetal acceleration of the mass = ω²r
= (20.94)²×1.2 m/s²
= 526.38 m/s².
b) the tension in the string = mω²r
= 0.50 kg × 526.38 m/s²
= 263.19 N.
Learn centripetal acceleration here:
https://brainly.com/question/14465119
#SPJ1
The creator of the diagram above considers gerrymandering to be "stealing an election." How do the maps exemplify this?
OA. Map A is fair to members of the Red Party.
OB. Map B is fair to members of the Blue Party.
O C. The maps show representation that is proportional to the voters registered with each party.
O D. Both maps give disproportionate representation to the party that had the power to draw the lines.
M
31
DELL
District-based voting is used to choose representatives in Congress, state legislatures, and many county and municipal positions. In contrast, populations shift. Depending on the district, folks may move in or move out. The demographics of districts may also shift.
Option C is correct Answer.
Why does redistricting matter?Election power is impacted by redistricting. It decides which political party rules the US Congress as well as the state and municipal governments. Redistricting so directly influences which issues a legislature decides to address and which to disregard.Also impacted by redistricting is the representation of the varied populations in the country's legislative bodies. By using redistricting, for instance, one can guarantee that communities of color have an equal opportunity to choose politicians who share their perspective and will support their issues. Another option is to deny them a place at the table. same goes for all other categories of communities of interest.To Learn more About District-based voting Refer To:
https://brainly.com/question/10284894
#SPJ1
According to Gordon Allport, which type of peronality trait are the mot dominant?
Allport believed that personality of human is categorized into three traits:Cardinal, Central and secondary. Among these traits, there exists a dominant force that defines your personality and influence your behavior, feelings and thoughts. This is called Cardinal Traits.
About Gordon AllportGordon AllportGordon Allport (November 11, 1897 – October 9, 1967) was a psychologist. He earned his doctorate in psychology from Harvard in 1922. He spent his career developing theories, studying social issues, such as prejudice, suspicion, communal, and developing personality tests.
According to Allport, one of the things that most motivates humans is the tendency to fulfill their biological needs. This tendency is called by Allport with opportunistic functioning. Opportunistic functioning is reactive, past oriented, and biological.
Nevertheless, Allport considers this opportunistic functioning is not very important in understanding human behavior, in fact most human behavior is motivated by something else, something that functions in the framework of self-expression, which Allport calls ''Propriate functioning''.
The point is that whatever a person does in life is usually for the sake of showing who he is. This self-function is proactive, future-oriented, and psychological. The word propriate comes from the word proprium which means self-concept. Allport's intention by putting more pressure on the proprium is to define the concept of self as carefully as possible.
Learn more about Gordon Allport at https://brainly.com/question/16307346.
#SPJ4
The volume of gas kept at a constant pressure varies inversely with the temperature t. If the temperature is 50 degrees, the volume is 20 cubic feet. What will the volume be when the temperature is 100 degrees?.
The volume of that gas in the 100 degrees temperature will be 100 cubic feet. The condition of the area is isobar or the same pressure. Hence, you have to formulate the solution based on isobars formula.
How to calculate the volume for that condition?As per data given, previous volume (V1) = 20 cubic feet; previous temperature (t1) = 50 degrees; current temperature(t2) = 100 degrees. the condition of the area is in the constant pressure or isobars. The formula we will use in the isobar is V1 : V2 = t1 : t2. So, the calculation would be:
V1 : V2 = t1 : t2
20 : V2 = 20 : 100
20 V2 = 20 x 100
V2 = 100 cubic feet
Learn more about isobars here
https://brainly.com/question/17447073
#SPJ4
A convex mirror forms an image of half the size of the object. When it is moved 15 cm away from the object, the size of the image becomes 2/5 times the size of object. Find the focal length of convex mirror. Answer is 30.
Answer:
focal length = 30 cm
Explanation:
You want the focal length of a convex mirror when moving the mirror an additional 15 cm away from the object causes its image size to decrease from 1/2 to 2/5 the size of the object.
Mirror equationThe relation between focal length (f), object distance (do) and image distance (di) is ...
1/f = 1/do +1/di
The ratio of heights is the same as the ratio of distances:
hi/ho =di/do
ApplicationIf we let do represent the original object distance, then (1/2)do = di, the original image distance. This gives one equation we need:
1/f = 1/do +1/(1/2do) = 3/do
Moving the mirror increases the object distance to (do+15). Now, the equation becomes ...
1/f = 1/(do+15) +1/(2/5(do+15)) = 7/(2(do+15))
SolutionSubstituting for 1/f, we have ...
3/do = 7/(2(do +15))
6(do +15) = 7do . . . . . . . . . cross multiply
90 = do . . . . . . . . . . . . subtract 6·do
Then the focal length is ...
1/f = 3/do
f = do/3 = 90/3 = 30
The focal length of the mirror is 30 cm.
Rock dropped from 18.16 m above the ground how fast will traveling when it reaches the ground
Answer: The Rock will be traveling at 5.93 m/s or around 21.4 km/hr or 13.3 mi/hr when it reaches the ground. (you can use go0gle to convert the speeds to something else, if needed)✅
PLEASEE GIVE BRANLIEST!!!
Explanation: ✅
The speed of the rock when it reaches the ground can be calculated using the equation:
v = √(2gh)
where v is the velocity, g is the acceleration due to gravity (approximately 9.8 m/s^2 on Earth), and h is the height from which the rock is dropped.
So, the speed of the rock when it reaches the ground will be approximately:
v = √(2 * 9.8 * 18.16) = √(35.1328) = 5.93 m/s
It will be traveling at 5.93 m/s or around 21.4 km/hr or 13.3 mi/hr when it reaches the ground.
A yellow lamp emits light with a wavelength of 6.00 · 10-7 m. How many such photons are required to produce 10.0 joules worth of photons? _____ photons 7.52 x 10 48 3.01 x 10 19 3.01 x 10 49 3.32 x 10 -18
A yellow lamp emits light with a wavelength of 6.00 ·. 3.01 x 10 19 photons such photons are required to produce 10.0 joules worth of photons.
Why are photons immortal?The quanta that make up light are called photons, and in the absence of any other interactions that would cause their characteristics to change, they remain ethereally stable with no indication that they would transform into any other particle.
In addition to releasing energy and generating heat, chemical activities within your body also release small quantities of photons, which are fundamental light particles. The bottom portion of your face and late afternoon are when the glow is most prominent.
learn more about photons
https://brainly.com/question/15946945
#SPJ1
Which statement best summarizes the information in the paragraph? Earthquakes may occur at all types of plate boundaries. The strength of an earthquake depends on the type of boundary. All earthquakes at plate boundaries result from forces underneath Earth’s surface or volcanic eruptions. Different types of plate interactions result in earthquakes of varying strengths at various depths.
Different types of plate interactions at plate boundaries can cause earthquakes of varying strengths, at various depths, which can be caused by both forces underneath Earth's surface and volcanic eruptions.
What is plate interaction?Plate interactions refer to the forces and mechanisms that cause the movements and interactions of the Earth’s plates. These interactions are driven by convection currents in the Earth’s mantle, which are generated by the heat energy released by the Earth’s core. The plates move in different directions, resulting in different types of plate interactions. The most common type of plate interaction is called divergent boundaries, which occur when two plates move away from each other.
To learn more about plate interaction
https://brainly.com/question/13649945
#SPJ1
Answer: D
Explanation: