For an addition reaction, why does the free energy term, G, become more positive with increasing temperature because the positive entropy term dominates at high temperature. So, option A is correct.
In an addition reaction, the free energy, G, is influenced by both the enthalpy, H, and entropy, S, terms. As temperature increases, the entropy term becomes more positive, while the enthalpy term remains relatively constant. At high temperatures, the positive entropy term dominates, causing the free energy, G, to become more positive. This means that the reaction becomes less favorable and less likely to occur.
The entropy term reflects the number of available molecular arrangements in a system and the degree of disorder. At high temperatures, the molecules have more kinetic energy and are more likely to be in disordered states. This results in a larger entropy term and a more positive G.
In contrast, the enthalpy term reflects the heat energy involved in a reaction and the bond-forming or bond-breaking nature of the reaction. At high temperatures, the enthalpy term remains relatively constant, as the reaction is not affected by changes in temperature.
In summary, the positive entropy term dominates at high temperature, causing the free energy, G, to become more positive and the reaction to become less favorable.
You can learn more about free energy at
https://brainly.com/question/27686274
#SPJ4
HELP!!!! I’ll Mark you As BRAINLIST
The tank of my Chrysler Voyager van holds 20.0 gallons of gasoline. What is the volume of my
gas tank in liters? (Show calculations, report correct significant figures and units)
Answer:
75.7082 liters
Explanation:
I did 20 gallons to liters
and I got 75.7082 liters
Please mark it brainliest. Ik it's probably wrong.
assume that at rest a neuron is selectively permeable to k and that the rising phase of the action potential depends on the opening of non-selective ion channels.
The resting potential of a neuron is maintained by selective permeability to potassium ions, and the initiation of the action potential is triggered by the opening of non-selective ion channels, allowing for the influx of positively charged ions.
A neuron at rest is in a state of polarization, meaning that there is a difference in electrical charge between the inside and outside of the cell. This resting potential is maintained by the selective permeability of the cell membrane to potassium ions, allowing them to flow out of the cell and creating a negative charge inside the cell. When an action potential is triggered, non-selective ion channels open, allowing positively charged ions such as sodium to enter the cell.
Learn more about potassium channels brainly.com/question/25262015
#SPJ4
Enzyme molecules are affected by changes in conditions within organisms. Explain how a prolonged, excessively high body temperature during an illness could be fatal to humans. Your answer must include:
the role of enzymes in a human
the effect of this high body temperature on enzyme activity
the reason this high body temperature can result in death
Enzymes are specialized proteins which can speed the reactions to a very great extent and thereby acts as efficient catalysts. The enzyme activity depends on pH and temperature.
What are enzymes?The biological catalysts which catalyze the chemical reactions taking place inside the cells and are capable of acting independently on the cells are defined as the enzymes.
Enzymes catalyze and control several chemical reactions that occur in our living cells. They helps in digestion, liver function, breathing, reproduction, nerve function, etc. The enzyme urea catalyzes the hydrolysis of urea.
The enzyme activity is sensitive to the temperature changes. All the enzymes shows maximum catalytic activity at optimum temperature. They are found to be denatured by heat and hence their activity is destroyed at high temperatures.
Thus at high temperature the enzymes will be inactive and this will affect the vital organs and lead to death.
To know more about enzymes, visit;
https://brainly.com/question/29774898
#SPJ1
determine the total, carbonate, and noncarbonate hardness in mg/l as caco3 and in meq/l for the water analysis in problem 7.5
The total hardness = 2.84 meq/L, carbonate hardness = 2.84 meq/L, and noncarbonate hardness = 0 meq/L.
What is hardness of water?
Hardness of water refers to the presence of dissolved minerals, specifically calcium and magnesium ions, in the water. Hard water is water that has a high concentration of these minerals, which can cause issues in household appliances and plumbing, as well as affect the taste and lather quality of soaps and detergents.
To determine the total, carbonate, and noncarbonate hardness in mg/L as CaCO3 and in meq/L, you need to follow the following steps:
Calculate the total hardness:
The total hardness can be calculated using the equation:
Total hardness (mg/L as CaCO3) = (Calcium (mg/L) + Magnesium (mg/L)) × 2.5.
In this case, the total hardness = (67.2 + 40) × 2.5 = 284 mg/L as CaCO3
Calculate the carbonate hardness:
The carbonate hardness can be calculated using the equation:
Carbonate hardness (mg/L as CaCO3) = Alkalinity (mg/L as CaCO3) - (Bicarbonate (mg/L as CaCO3) + Noncarbonate hardness (mg/L as CaCO3))
In this case, the alkalinity = 284 mg/L as CaCO3 and the bicarbonate = 0 mg/L as CaCO3, so the carbonate hardness = 284 - 0 = 284 mg/L as CaCO3
Calculate the noncarbonate hardness:
The noncarbonate hardness can be calculated using the equation:
Noncarbonate hardness (mg/L as CaCO3) = Total hardness (mg/L as CaCO3) - Carbonate hardness (mg/L as CaCO3)
In this case, the noncarbonate hardness = 284 - 284 = 0 mg/L as CaCO3
Convert the values to meq/L:
To convert the values to meq/L, use the following conversion factors:
1 mg/L as CaCO3 = 0.01 meq/L
1 mg/L as MgCO3 = 0.02 meq/L
In this case, the total, carbonate, and noncarbonate hardness in meq/L can be calculated as:
Total hardness (meq/L) = 284 × 0.01 = 2.84 meq/L
Carbonate hardness (meq/L) = 284 × 0.01 = 2.84 meq/L
Noncarbonate hardness (meq/L) = 0 * 0.01 = 0 meq/L
So, the total hardness = 2.84 meq/L, carbonate hardness = 2.84 meq/L, and noncarbonate hardness = 0 meq/L.
To know more about noncarbonate hardness, visit:
brainly.com/question/29666609
#SPJ4
What is the final pH if you have 700 ml of sodium acetate buffer (50 mM, ph of 5.0) and you add 10 ml of 1 M NaOH?
Answer: 5.85
Explanation:
Calculate ratio of conjugate base to acid at pH 5; determine amounts of acetate and acetic acid in a 50 mM buffer; adjust change of moles when adding NaOH and then recalculate
I need help with a chemistry assignment
On increasing the temperature and pressure of ideal gas volume increases. The ideal gas, sometimes known as the perfect gas.
What is ideal gas?The ideal gas, sometimes known as the perfect gas, is a gas that, in physical behavior, corresponds to a certain idealized connection among pressure, volume, as well as temperature known as the ideal, or general, gas law.
This law is a generalization that includes both Boyle's and Charles' laws as special instances, and it asserts that for a given amount of gas, the product of volume V plus pressure P is proportionate to absolute temperature T; that is, PV = kT, where k is a constant. On increasing the temperature and pressure of ideal gas volume increases.
Therefore, on increasing the temperature and pressure of ideal gas volume increases.
To learn more about ideal gas, here:
https://brainly.com/question/12677792
#SPJ1
A gas has a pressure of 1.43 atm and occupies
a volume of 7.7 L. If the gas is compressed to
a volume of 1.64 L, what will its pressure be,
assuming constant temperature?
The gas pressure after compression will be 6.76 atm.
What is gas pressure?The ideal gas law, one that states , PV = nRT, where P seems to be the pressure, V is the volume, n represents the number of moles of gas, R is the ideal gas constant, and T is the temperature in kelvin, can be used to calculate the pressure of a gas.Assuming that number of moles of gas as well as the temperature remain constant during compression, the gas pressure after compression can be calculated as follows:
Given
Pressure = 1.43 atm
Volume = 7.7 L
Volume after compression = 1.64 L
V2 = (nRT) / 1.64 L P2 = (nRT)
P2 denotes the pressure after compression, and V2 denotes the volume after compression. To find P2, we must enter the following values into the equation:
6.76 atm = (1.43 atm x 7.7 L) / 1.64 L
As a result, the gas pressure after compression will be 6.76 atm.
To learn more about gas pressure refer to :
https://brainly.com/question/25736513
#SPJ1
A 0.10 M solution of a weak monoprotic acid has a pH of 4.0. What is the ionization constant, K
a
, of the acid?
The ionization constant, Ka, of a weak monoprotic acid with a 0.10 M solution and a pH of 4.0 is 1 x 10^-4. This means that for every 0.10 moles of the acid, 0.0001 moles will dissociate in an aqueous solution.
The reaction of a weak acid with water to form ions is known as acid dissociation. Weak acids, like the one in the question, do not completely dissociate in water and are only partially ionized. The degree of ionization is dependent on the value of the acid's ionization constant, Ka. This value is a measure of the acid's strength, and is determined by the equilibrium constant for the reaction between the acid and water.
Learn more about monoprotic acid:
https://brainly.com/question/12850710
#SPJ4
identify the kind(s) of intermolecular forces that would occur between the solute and solvent in an acetic acid (which is polar and contains an oh group) solution.
Intermolecular forces that would occur between the solute and solvent in an acetic acid are Hydrogen bridges, dipole-dipole interactions and dispersion force.
As a polar organic acid with a hydroxile group incorporated into a carboxyle function group, acetic acid has the ability to generate hydrogen bonds. On the other hand, because it can be partially dissociated, a piece of the chain that is partially positive or partially negative might engage in dipole-dipole interactions with other molecules.
Last but not least, London dispersion forces, a weaker version of the dipole-dipole interactions, are present when the electrons in two nearby atoms hold positions that cause the atoms to temporarily form dipoles.
Learn more about intermolecular forces at https://brainly.com/question/9328418
#SPJ4
A chemical supply company ships a certain solvent in 1010-gallon drums. Let X� represent the number of drums, ordered by a randomly chosen customer. Assume X� has the following probability mass function:x01234p(x)0.40.20.20.10.1�01234�(�)0.40.20.20.10.1(a) Find the mean number of drums ordered.(b) Find the variance of the number of drums ordered.(c) Find the standard deviation of the number of drums ordered.(d) Let Y� be the number of gallons ordered. Find the probability mass function of Y�.(e) Find the mean number of gallons ordered.
a) The mean number of drums ordered is 1.4.
b) The variance in the number of drums ordered is 0.84.
c) The standard deviation of the number of drums ordered is 0.917.
d) The probability mass function of Y is the same as the probability mass function of X.
e) The mean number of gallons ordered is 14.
(a) The mean (or expected value) of X can be found by multiplying each value of X by its probability and adding the results. So:
E(X) = (0)(0.4) + (1)(0.2) + (2)(0.2) + (3)(0.1) + (4)(0.1) = 1.4
Therefore, the mean number of drums ordered is 1.4.
(b) The variance of X can be found using the formula:
Var(X) = E(X²) - [E(X)]²
To find E(X²), we calculate:
E(X²) = (0²)(0.4) + (1²)(0.2) + (2²)(0.2) + (3²)(0.1) + (4²)(0.1) = 2.2
Then, we can find the variance:
Var(X) = 2.2 - (1.4)² = 0.84
Therefore, the variance of the number of drums ordered is 0.84.
(c) The standard deviation of X is the square root of the variance:
SD(X) = √(Var(X)) = √(0.84) = 0.917
Therefore, the standard deviation of the number of drums ordered is approximately 0.917.
(d) Let Y be the number of gallons ordered. Since each drum contains 10 gallons, we have Y = 10X. Therefore, the probability mass function of Y can be found by substituting Y/10 for X in the given probabilities:
y 0 10 20 30 40
p(y) 0.4 0.2 0.2 0.1 0.1
Therefore, the probability mass function of Y is the same as the probability mass function of X, except the values are multiplied by 10.
(e) To find the mean number of gallons ordered, we use the linearity of expectation:
E(Y) = E(10X) = 10E(X) = 10(1.4) = 14
Therefore, the mean number of gallons ordered is 14.
Learn more about the probability mass function at
https://brainly.com/question/30070005
#SPJ4
The question is -
A chemical supply company ships a certain solvent in 10-gallon drums. Let X represent the number of drums, ordered by a randomly chosen customer. Assume X has the following probability mass function:
x 0 1 2 3 4
p(x) 0.4 0.2 0.2 0.1 0.1
(a) Find the mean number of drums ordered.
(b) Find the variance of the number of drums ordered.
(c) Find the standard deviation of the number of drums ordered.
(d) Let Y be the number of gallons ordered. Find the probability mass function of Y.
(e) Find the mean number of gallons ordered.
Compute the atomic packing factor for the diamond cubic crystal structure (shown in the figure below). Assume that bonding atoms touch one another, that the angle between adjacent bonds is 109.5o, and that each atom internal to the unit cell is positioned a/4 of the distance away from the two nearest cell faces (a is the unit cell edge length).
The atomic packing factor for the diamond cubic crystal structure is 34% and it is a loosely packed structure.
Number of atoms contributed by the corner atoms to an unit cell is 1/8×8 =1 and number of atoms contributed by the face centred atoms to the unit cell is 1/2 × 6 = 3 and atoms inside the structure=4 ,so total number of atoms present in a diamond cubic unit cell is 1 + 3 + 4 = 8, Since each carbon atom is surrounded by four more carbon atoms, the co-ordination number is 4.
From triangle WXY
XY^2=(a/4)^2+(a/4)^2
=(a^2)/8
From triangle XYZ
XZ^2=(a^2)/8 + (a/4)^2
=(3a^2)/16
But XZ=2r
So (2r)^2 = (3a^2)/16
Atomic radius r =( a(3)^1/2)/8
Atomic packing factor is = v/V
=[(8*4*PI*r^3)/3]/[(a)^3]
By putting value of r we get-----
APF=0.34 =34%
Thus it is a loosely packed structure.
To learn more about unit cell check the link below:
https://brainly.com/question/17218051
#SPJ4
How many bromine atoms are present in 30.1 g of CH2Br2
Answer:
There are approximately 1.43 x 10^23 bromine atoms in 30.1 g of CH2Br2.
Explanation:
Calculate the molar mass of CH2Br2:
M(CH2Br2) = M(C) + 2M(H) + 2M(Br)
M(CH2Br2) = 12.01 g/mol + 2(1.01 g/mol) + 2(79.90 g/mol)
M(CH2Br2) = 252.82 g/mol
Calculate the number of moles of CH2Br2:
n = m/M
n = 30.1 g / 252.82 g/mol
n = 0.119 mol
Determine the number of bromine atoms:
There are 2 bromine atoms in each molecule of CH2Br2, so we can use Avogadro's number to convert moles to atoms:
N = n * N_A * 2
N = 0.119 mol * 6.022 x 10^23 atoms/mol * 2
N = 1.43 x 10^23 bromine atoms
Which of the following statements is true about Gamma/X-rays?
A. Gamma/X-rays are isotopes of Helium-4.
B. Gamma/X-rays have mass of 4 and charge of +2.
C. Gamma/X-rays have no mass and no charge.
D. Gamma/X-rays have the highest ionizing power.
Answer:
C. Gamma/X-rays have no mass and no charge.
Explanation:
Gamma/X-rays are a type of electromagnetic radiation with no mass and no charge. They differ from other forms of radiation, such as alpha and beta particles, which have mass and charge. Gamma/X-rays are high-energy photons that have the highest frequency and shortest wavelength in the electromagnetic spectrum. They have very high ionizing power, which means they can remove electrons from atoms and molecules as they pass through matter, leading to potentially harmful effects on living organisms.
how many grams are in 6.95X10^24 molecules of SF6?
One moles of SF₆ contains 6.02 × 10²³ molecules and it weighs 146 g. The number of moles of 6.95 × 10²⁴ SF₆ molecules is 11.54. he mass of 11.54 moles is 1686 g.
What is one mole ?One mole of a substance is its amount containing 6.02 × 10²³ atoms or molecules. This number is called Avogadro number. One mole of every elements contains Avogadro number of atoms.
Similarly one mole of every compound contains 6.02 × 10²³ molecules. The mass of one mole of compound is called its molar mass.
Molar mass of SF₆ = 146 g/mol
No.of atoms in 146 g or one mole of SF₆ = 6.02 × 10²³
Then, number of moles of 6.95 × 10²⁴ SF₆ molecules
= 6.95 × 10²⁴/6.02 × 10²³ = 11.54 moles.
Mass of 11.54 moles = 11.54 × 146 =1686 g.
Therefore, 6.95 × 10²⁴ SF₆ molecules weighs 1686 g.
Find more on Avogadro number:
brainly.com/question/11907018
#SPJ1
Stoichiometry worksheet 3 multi step Problems
As per the balanced reaction, 2 moles of sodium nitrate reacts with one mole of calcium carbonate. Then , 20 g or 0.2 moles of calcium carbonate needed 0.4 moles of sodium nitrate which is equal to 2.4 × 10²³ formula units.
What is Avogadro number ?One mole of every element contains 6.02 × 10²³ number of atoms. This number is called Avogadro number. Then, one mole of every compounds contain Avogadro number of molecules or formula units.
Given in the reaction, 2 moles of sodium nitrate is required by 1 mole of calcium carbonate.
molar mass of calcium carbonate = 100 g/mol
no.of moles in 20 g = 20/100 = 0.2 moles.
Hence, 20 g or 0.2 moles of calcium carbonate need 0.4 moles of sodium nitrate.
one mole of sodium nitrate contains 6.02 × 10²³ formula units. The number of formula units in 0.4 moles = 0.4 × 6.02 × 10²³ =2.4 × 10²³.
Therefore, the reaction need 2.4 × 10²³ formula units of sodium nitrate.
Find more on Avogadro number:
https://brainly.com/question/18948587
#SPJ1
For each pair of compounds listed, check the box next to the one with the higher boiling point. compounds higher boiling point Ne Ar CH, CH.CH CH, CH GeCl4 SnC14
The boiling point of a substance depends on the intermolecular forces of attraction between its molecules. Generally, the stronger the intermolecular forces, the higher the boiling point.
For each pair of compounds listed, the one with the higher boiling point is:
Ne (neon) and Ar (argon): Ar has a higher boiling point.CH₄ (methane) and CH₃CH₃ (ethylene): CH₃CH₃ has a higher boiling point.CH₃CH₃ (ethylene) and CH₂=CH₂ (ethene): CH₃CH₃ (ethylene) has a higher boiling point.GeCl₄ (germanium tetrachloride) and SnCl₄ (tin tetrachloride): SnCl₄ (tin tetrachloride) has a higher boiling point.Learn more about a compound boiling point here: https://brainly.com/question/14058698
#SPJ4
draw ethyl ester formation with benzoic acid reaction.
The hydronium ion ion, H 3 O +, found in all solution of acids in water, serves as the real catalyst in this situation. The ester absorbs a protons (a h+) from of the base in the first step.
Acidic compounds are what?
Acidic compounds can come from both plant sources, like the citric acid found in fruits, and artificial sources, like sulphuric acid. Typical compounds that react to generate salt and water whenever they come into touch with one another are acids and bases. The word "acid" comes from the Latin acere, which means "sour."
Acid in water is what?
Any material that when dissolved in water has an acidic taste, can change the color of some indicators (such as reddening blue litmus paper), can react with some metals (such as iron) to release hydrogen, can combine with bases to produce salts, and can accelerate some oxidation processes (acid catalysis)
To know more about acids visit:
https://brainly.com/question/14072179
#SPJ1
2) design an experiment to determine the effect of changing the temperature (cold to freezing) of the catalase on the rate of reaction
To determine the effect of changing the temperature on the rate of reaction of catalase, the following experiment can be designed:
Prepare a solution of catalase by dissolving it in a buffer solution of a suitable pH.
Add hydrogen peroxide to the catalase solution to initiate the reaction.
Record the initial rate of reaction by measuring the amount of oxygen produced over a set time interval (for example, every 30 seconds).
Repeat the reaction at different temperatures, starting at room temperature and gradually reducing it to below freezing.
At each temperature, repeat step 3 and measure the rate of reaction.
Plot the results to determine the effect of temperature on the rate of reaction.
By changing the temperature from cold to freezing, the rate of reaction of catalase will be affected due to the change in the activation energy of the reaction. The effect of temperature on the reaction rate can be determined by comparing the initial rate of reaction at each temperature. If the rate of reaction increases with increasing temperature, it can be concluded that the reaction is temperature dependent.
Learn more about catalase:
brainly.com/question/12905174
#SPJ4
Chemical action of shampoo and conditioner on hair
While shampoo opens the cuticles of the hair to remove dirt and impurities, conditioner seals them to keep moisture in. These two essential hair care products work together to give you healthy, strong, and moisturized hair.
What is the main purpose of shampoo?The shampoo's main purpose is to remove dirt and soil from your hair before conditioning it. This is typically accomplished by constructing the shampoo from two distinct types of ingredients. The first type are surfactants, which are used to clean the hair.
Hair conditioners typically contain cationic surfactants, which do not completely wash out because their hydrophilic ends bind to keratin. The surfactant molecules' hydrophobic ends then serve as the new hair surface.
Thus, A detergent molecule in shampoo acts as a surfactant, lowering the surface tension between water and sebum.
To learn more about the shampoo, follow the link;
https://brainly.com/question/13466045
#SPJ1
Determine the overall charge on particles with the following subatomic makeups. 13 protons 14 neutrons 10 electrons 8 protons 10 neutrons 8 electrons 15 protons 18 neutrons 18 electrons 3 protons 3 neutrons 2 electrons
The first particle has a positive charge of +1, the second particle has a neutral charge, the third particle has a neutral charge, and the fourth particle has a negative charge of -1.
The number of electrons in each particle determines the charge of the particle. A positive charge occurs when there are fewer electrons than protons, and a negative charge occurs when there are more electrons than protons. In the first particle, there are 13 protons and only 10 electrons, so there is a positive charge of +1. In the second particle, there are 8 protons and 8 electrons, so the charge is neutral. In the third particle, there are 15 protons and 18 electrons, so the charge is neutral. In the fourth particle, there are 3 protons and 2 electrons, so there is a negative charge of -1.
It is important to understand the relationship between the number of protons, electrons, and neutrons in order to understand the behavior of atomic particles and predict their behavior in chemical reactions. The charge of a particle is a fundamental property that determines its behavior in chemical reactions and interactions with other particles.
Learn more about protons
brainly.com/question/11014306
#SPJ4
which state of matter holds its own shape
Answer:
Solids
Explanation:
hope that helps!
What volume in quarts is occupied by 100g of Hg?
The volume of a substance is found to be measured in Liters, Milliliters, cubic meters, etc. The volume in quarts is occupied by 100g of Hg is 0.0077.
What is volume?The term volume of a substance denotes how much capacity of matter it can hold. For example if a beaker can hold 100 mL of water, then its volume is said to be 100 mL.
The volume is also known as the ratio of mass to the density.
The equation connecting density and mass of a substance is given as:
Density (d) = Mass / Volume
Here density of Hg = 13.6 g cm⁻³, Mass = 100 g
Then d = 100 g / 13.6 = 7.352 cm³
1 cm³ = 0.001 L
V = 7.352 × 0.001 = 0.00735 L
1 L = 1.057 Quartz
0.00735 L = 0.0077 quartz.
Thus the volume in quarts is 0.0077.
To know more about density, visit;
https://brainly.com/question/3441795
#SPJ1
which of the following statement is not true?a. trans alkenes are more stable than cis with the same substitutesb. a higher data delta h for heat of hydrogenation means you have a less stable alkenec. alkene stability is influenced by the degree of substitutiond. cis and geminal alkenes are considered equal in terms of stability
The statement that is not true is "cis and geminal alkenes are considered equal in terms of stability."
Alkenes are organic compounds that contain a carbon-carbon double bond and are classified into two groups based on the orientation of their substituents: cis-alkenes and trans-alkenes. The stability of alkenes is influenced by various factors, including the degree of substitution and the heat of hydrogenation (ΔH).
Generally, trans-alkenes are considered more stable than cis-alkenes with the same substituents because the substituents are farther apart in the trans isomer. Meanwhile, a higher ΔH for the heat of hydrogenation means that the alkene is less stable, as it requires more energy to convert the double bond into a single bond.
Learn more about alkene stability here: https://brainly.com/question/28946346
#SPJ4
write a net ionic and molecualr equation for displacement reaction iron(ii) acetate potassium hydroxide
Net ionic and molecular equation for displacement reaction iron(ii) acetate potassium hydroxide molecular equation
[tex]HC_2H_3O_2 (aq) \:+KOH(aq)\:\rightarrow \:KC_2H_3O_2 (aq) \:+H_2O(l)[/tex] and the Net ionic equation
[tex]HC_2H_3O_2 (aq) \:+OH^-\((aq):\:\rightarrow \:C_2H_3O_2^-(aq)\:+H_2O(l)[/tex]
Chemical reactions known as displacement reactions occur when a more reactive element removes a less reactive element from a molecule. When two chemicals interact by transferring ions, a double displacement reaction occurs, creating two new molecules. In the twofold displacement process, positive ions trade places with negative ions. In water-soluble ionic compounds, numerous double displacement reactions take arise. Precipitation reactions are those in which an insoluble solid separates from the solution and forms.
molecular equation
[tex]HC_2H_3O_2 (aq) \:+KOH(aq)\:\rightarrow \:KC_2H_3O_2 (aq) \:+H_2O(l)[/tex]
ionic equation
[tex]HC_2H_3O_2 (aq) \:+K^+(aq)\:+OH^-\((aq):\:\rightarrow \:C_2H_3O_2^-(aq)\:+ K^+(aq)\:+H_2O(l)[/tex]
Net ionic equation
Here, we cancel the ions that appear on each side of the equation.
[tex]HC_2H_3O_2 (aq) \:+OH^-\((aq):\:\rightarrow \:C_2H_3O_2^-(aq)\:+H_2O(l)[/tex]
Learn more about displacement reaction
brainly.com/question/29307794
#SPJ4
Discuss the main characteristic features of the transition elements with special reference to their atomic size, variable oxidation states, magnetic and catalytic properties.
Most of the transition elements show paramagnetic behavior. The unpaired electrons in d orbitals are responsible for the magnetic properties.
What transition elements explain their magnetic and catalytic properties?The paramagnetic nature of the transition metals increases on moving from left to right as the number of unmatched electrons increases from one to five. An interesting usual of transition metals is their ability to form magnets. Metal complexes that have unmatched electrons are magnetic.
Transition elements (also known as transition metals) are elements that have relatively filled d orbitals. IUPAC defines transition elements as an element having a d subshell that is moderately filled with electrons, or an element that has the ability to form stable cations with an faultily filled d orbital.
So we can conclude that Transition elements with paired electrons are diamagnetic, meaning they are interested to magnetic fields in the opposite direction.
Learn more about Transition elements here: https://brainly.com/question/20549803
#SPJ1
Based on valence bond theory, which statement best describes the electron geometry, bonding and hybridization of the central atom in carbon tetrachloride?
The electron geometry of carbon tetrachloride is tetrahedral, with 4 single bonds. The bonding and hybridization of the central atom is sp3, meaning that the electron orbitals used in the bonding are three hybridized orbitals composed of one s orbital and three p orbitals.
SP3 hybridization is a type of electron orbital hybridization that forms four sp3 orbitals, which are composed of one s orbital and three p orbitals. This hybridization is most commonly seen in molecules where the central atom is surrounded by four different atoms or groups of atoms. In carbon tetrachloride, the carbon atom is surrounded by four chlorine atoms, and each chlorine atom is single-bonded to the central carbon atom.
Learn more about The electron geometry of carbon tetrachloride:
https://brainly.com/question/9846107
#SPJ4
A positive point charge with charge
6.61C
is located at coordinate
(0,0)
and is in water. Calculate the y-component of the total electric field in
N/C
produced by this charge in water at coordinate
(1.01,−3.55)
. The coordinates are given in meters. Please enter a numerical answer below. Aocepted formate are numbert or "e" based scientific notation e
9,0,23,−2,106,5.23
e-8
Can be used to calculate the y-component of the electric field in N/C produced by a positive point charge at coordinate (0,0) in water. Therefore, the positive point charge in water at coordinate (1.01, -3.55) produces a total electric field in N/C with a y-component of -4.55 x 105 N/C.
An electrically charged object can produce an electromagnetic field that has an impact on other electrically charged objects nearby. Lines of force radiating from the charged object and interacting with other charged objects can be used to represent this field. As the charged object is moved further away, the electric field's strength weakens in direct proportion to the charge. A fundamental idea in physics, the electric field is utilised to explain how charged particles interact. It is measured in units of N/C and is a vector quantity (Newtons per Coulomb). Coulomb's law, which states that the force between two charged objects is proportional to the product of the electric field can be used to compute the electric field.
Leran more about Electric field here:
https://brainly.com/question/12943568
#SPJ4
Describe the difference between a subscript number in a molecule such as H₂O versus a coefficient
number in a chemical reaction such as: 2H₂O.
A subscript number in a molecule and a coefficient number in a chemical reaction are distinct from one another.
What are molecules?A collection of atoms that have chemically joined forces to create a unique chemical species is known as a molecule. The size of a molecule can vary from a small, diatomic species like oxygen (O2) to a large, complex structure like a protein. A molecule can also contain one or more types of atoms.
While a coefficient number in a chemical process, like 2H2O, denotes the number of molecules of a substance involved in the reaction, a subscript number in a molecule, like H2O, shows the number of atoms of a certain element in the molecule.
The coefficient number describes the amount of the material involved in a reaction, whereas the subscript number refers to the molecule's composition. For instance, the subscript 2 in the molecule H2O denotes that the molecule contains two hydrogen atoms and one oxygen atom. A coefficient of 1 would suggest that only one molecule of H2O is interacting in the reaction 2H2O, whereas a coefficient of 2 indicates that there are two molecules of H2O responding.
The stoichiometry of the reaction, which characterises the relative quantities of the reactants and products, is determined by the coefficient number.
To know more about molecules, visit:
https://brainly.com/question/19595631
#SPJ1
Write the complete nuclear reaction describing the initial alpha decay of Ts-293. Include all reactants and products separated by a reaction arrow, and include all isotopes and particles. Balance the reaction with coefficients if necessary. Include the correct superscripts and subscripts on each isotope and particle. For example, an electron would be written
∫ −1
e
The initial alpha decay of Ts-293 (Tennessine) can be described by the following nuclear reaction:
Ts-293 → Rg-289 + He-4
In this reaction, Ts-293 (Tennessine) decays into Rg-289 (Roentgenium) and a helium-4 nucleus (alpha particle). The subscripts indicate the atomic number of each isotope and the superscripts indicate the atomic mass. The reaction is balanced, with one atom of Ts- 293 decaying into one atom of Rg-289 and one alpha particle (He-4).
Learn more about nuclear reaction here: https://brainly.com/question/13315150
#SPJ4
What chemical is produced by endothelial cells at the site of injury during the first step of platelet plug formation?
The chemical produced by endothelial cells at the site of injury during the first step of platelet plug formation is von Willebrand factor (VWF). VWF is a glycoprotein that is released from endothelial cells when they are injured.
What is endothelial ?Endothelial cells are the cells that line the inside of the body's organs and vessels, such as the intestines, the heart, and the blood vessels. These cells are a type of epithelial cell, meaning that they form a single layer that serves as a barrier between the body's organs and the outside environment. Endothelial cells are particularly important in providing a barrier between the blood and the body's other organs and tissues. They are also important in regulating the movement of fluids and nutrients throughout the body, and in providing a barrier to stop any potentially harmful substances from entering the body. Endothelial cells also play an important role in regulating the body's inflammatory response, as well as its immune response. Endothelial cells are also important in regulating vascular tone, which helps to ensure that the blood vessels are working normally.
To learn more about endothelial
https://brainly.com/question/28819363
#SPJ4