find the projection of u = −i j k onto v = 5i j − 6k.

The required magnitude of a vertical electric field that will just barely counterbalance the weight of a plastic bead is calculated to be 15.42 × 10³ C.

The mass of the bead is given as, m = 2.2 g = 2.2 × 10⁻³ kg

The charge on the bead q = 1.4 μc = 1.4 × 10⁻⁶ c

Magnitude of vertical electric field = ?

The electric field's force on the charged plastic sphere equals q E.

The plastic spherical is m g in weight.

where, g is the acceleration due to gravity

Now the force due to electrostatic field is balanced by the weight of the plastic sphere.

q E = m g

E = m g / q

E = (2.2 × 10⁻³)(9.81)/(1.4 × 10⁻⁶) = (2.2 × 9.81 × 10³)/1.4 = 15.42 × 10³ C

To know more about electric field:

https://brainly.com/question/12972779

#SPJ4

If the skier hits a snowdrift and stops in 0.30 s, She would go into the drift to 2.25 m. The average force that she will strike the drift is 3250 N.

The speed at which an object's location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined.

a = -15 / 0.3 = -50 m/s2

v2 - v02 = 2ax

- 152(-50)x == > x = 2.25 m

F = ma = 65 x 50 = 3250 N

Therefore, a. She would go into the drift to 2.25 m.

b. The average force that she will strike the drift is 3250 N.

To learn more about speed, refer to the link:

https://brainly.com/question/7359669

#SPJ1

The most common measurement used to record heat transfer in a classroom investigation is a calorimeter.

A calorimeter is a device used to measure the amount of heat transferred to or from a substance during a chemical or physical reaction. It is commonly used in the classroom setting for experiments that involve the transfer of heat energy. The basic design of a calorimeter consists of an insulated container that holds the substance and a thermometer or temperature probe to measure the temperature change of the substance.

The insulation helps to reduce heat loss to the surrounding environment, which makes the measurement of heat transfer more accurate. Calorimeters can be used to determine the specific heat capacity of a substance, to measure the heat of reaction in a chemical reaction, or to measure the heat transfer between two substances of different temperatures. The results of these experiments can be used to calculate the amount of energy transferred and to determine the energy changes that occur during chemical reactions.

You can learn more about calorimeter at

https://brainly.com/question/1407669

#SPJ4

The distance at which the gravitational force will be zero is called the balance point, or the Lagrange point.

define distance ?

Distance refers to the amount of space between two points or objects. It is a scalar quantity and is measured in units of length, such as meters, feet, or kilometers. The distance between two points is equal to the length of the path connecting those two points.

The distance at which the gravitational force will be zero is called the balance point, or the Lagrange point. This distance can be calculated using the formula for the gravitational force between two masses and setting it equal to zero. However, the exact value of this distance would depend on the specific masses and distances involved, which are not specified in the question.

To learn more about distance follow the given link: https://brainly.com/question/12356021

#SPJ4

Add five to this number. The outcome is divided by nine. Consider the following scenario: You want to know whatever the temperature would be in degree Celsius at 80 degrees Fahrenheit.

How do you convert a measurement from Fahrenheit to Celsius?

Converting a current temperature from the Order of 0.1 to a Celsius scale is known as the Fahrenheit to Celsius conversion. The formula for the connection among Celsius and Celsius is °Cc = (°F - 32) 5/9, where C stands for the number in Celsius and D e stands for the value in Fahrenheit.

What does 0 Celsius translate to in Fahrenheit?

conversion formula for Celsius to Fahrenheit. 32 degrees Fahrenheit is the same as zero degrees Celsius.The temperature T is equivalent to the temperature in degrees Fahrenheit (°F).

To know more about Fahrenheit  visit:

https://brainly.com/question/14132731

#SPJ4

The electric field at the midpoint between the two charges each of 30 μC, is zero.

Charge q₁ = +30 μC

Charge q₂ = +30 μC

Distance between both the charges, d = 4 cm

Midpoint will be 2 cm from each charge. so r = 2 cm

We know the electric filed produced by a charge, at a distance of d is formulated as, E = q/(4πε₀r²)

Where q is the charge, ε₀ is the constant of permittivity of vacuum.

Let 1/(4πε₀) = k, then E = kq/r²

Electric field due to first charge at 2 cm from it, E₁ = (k × 30)/2²

Similarly, electric field due to second charge at 2 cm from it, E₂ = (k × 30)/2²

E = E₁ - E₂

E = (k × 30)/2² - (k × 30)/2²

E = 0

To know more about electric field, here

https://brainly.com/question/15800304

#SPJ4

The stony moon of Jupiter With hundreds of eruptions, some of which are spouting lava fountains that are a few kilometers (or kilometers) high, Io is the solar system's largest volcanically active planet.

By far the biggest world in the solar system, Jupiter is more than times as large than all of the other planet put altogether. Jupiter is the sixth planet from our Sun. The swirls and patterns of Jupiter are really urea and water clouds floating in a helium- and hydrogen-rich atmosphere.

The clouds tops are thought to be roughly -280 degrees Fahrenheit frigid. The overall temperature of Mars is -238 degrees Fahrenheit. Jupiter's pole is only little more than 3 degrees inclined, therefore

To know more about Jupiter visit:

https://brainly.com/question/10776461

#SPJ4

The study of the atmosphere and the phenomena it causes, such as weather and climate, is known as meteorology.

It's common to think of meteorologists as weather forecasters. Indeed, some meteorologists do that.

Weather forecasting is a challenging procedure that calls both both cutting-edge modern equipment and some time-tested methods. Meteorologists conduct study and act as observers.

They observe the atmospheric conditions above them and examine maps, satellite data, and radar data. Various types of weather information from local, regional, and international sources are also compared.

Therefore, The study of the atmosphere and the phenomena it causes, such as weather and climate, is known as meteorology.

To learn more about meterology, refer to the link:

https://brainly.com/question/5122598

#SPJ1

(a) The potential energy of a 100 g steel ball that falls from a height of 1. 8m on to a metal plate and rebounds to a height of 1. 25 m. before the fall = 1.8 Joules

(b) The kinetic energy as it hits the plate = 1.8 Joules

(c) The velocity on hitting the plate = 6 m/s

(d) The kinetic energy as it leaves the plate on the rebound = 5 m/s

To determine the potential energy, use the equation:

PE = mgh

Where:

m = mass of the object (kg)

g = acceleration due to gravity (10 m/s²)

h = height (m)

Hence,

(a)

The potential energy:

PE = mgh

= (0.1) (10) (1.8

= 1.8 Joules

(b)

The kinetic energy as it hits the plate:

KE = PE

KE = 1.8 Joules

(c)

The velocity on hitting the plate:

KE = [tex]\frac{1}{2}[/tex] mv²

1.8 =  [tex]\frac{1}{2}[/tex] (0.1)v²

v = 6 m/s

(d)

The kinetic energy as it leaves the plate on the rebound:

PE = mgh

= (0.1) (10) (1.25)

= 1.25

KE = [tex]\frac{1}{2}[/tex] mv²

1.25 = [tex]\frac{1}{2}[/tex] (0.1) v²

v = 5 m/s

Learn more about potential energy here: https://brainly.com/question/30364759

#SPJ4

The distance between two adjacent nodes of the wave is determined as 8.04 m.

The distance between two adjacent nodes of the wave is calculated by applying the following formula;

Node to Node = λ/2

Node to Node = length of the string = 4.02 m

where;

The distance between two adjacent nodes of the wave is calculated as;

λ/2 = L

λ = 2L

λ = ( 2 )  x ( 4.02 m )

λ = 8.04 m

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1

A radio wave's frequency is the number of cycles it completes in one second, and is measured in hertz (Hz).

One cycle of a radio wave is the time it takes for the wave to complete a cycle of its waveform, from the peak to the trough, and back to the peak again. A radio wave's frequency is the number of cycles it completes in one second, and is measured in hertz (Hz). For example, a radio wave with a frequency of 1 MHz (one million hertz) will have a cycle time of 1 microsecond (one millionth of a second).

The cycle time of a radio wave is the inverse of its frequency, and represents the time it takes for the wave to complete one full cycle of its waveform, from peak to trough and back to peak again. The higher the frequency, the shorter the cycle time, and vice versa.

To know more about frequency please refer:

https://brainly.com/question/2140860

#SPJ4

The leaves are getting closer.

An electroscope is an early scientific instrument used to detect the presence of electrical charges in a body. The charge is detected from the motion of the test object due to the Coulombic electrostatic force acting on the test object. The amount of electric charge on an object is proportional to the voltage. The electroscope consists of a metal button and he two blades. When a negatively charged object is brought close to the instrument, the blade will repel and move away. There are two types of electroscopes: the medulla electroscope and the gold foil electroscope. When a negatively charged object is brought close to the electroscope, the charge induces a positive charge on the leaves. So nothing should happen. However, induction causes the leaves to move closer together.

Learn more about Electroscope

brainly.com/question/28139099

#SPJ4

Internal resistance means the resistance from battery or cell, that is, the opposition to the flow of current offered by the cells and batteries.

The ideal voltmeter is a voltmeter that does not influence the circuit, because the current passing through it is zero, this is not practically possible.

The internal resistance of an ideal voltmeter is infinity.

Resistance is a unit used to measure the opposition to current flow in an electrical circuit and is measured in ohms.

It is an instrument used to measure potential difference in volts.

The rate at which electrons flow past a point in a complete electrical circuit and current flows in opposite direction than that of electrons.

To know more about resistance, visit:

https://brainly.com/question/17563681

#SPJ4

Answer:

the driver need to stop before he drive

Explanation:

if he keep driving he will hit a car

The time it takes for radio signals to travel from Earth depends upon the distance they are traveling to. Radio signals travel at the speed of light, which is roughly 299,792,458 meters each second.

In this way, to compute the time it would take for a radio transmission to travel a specific distance, you would isolate the distance by the speed of light which is about 3 x 108 m/s

For example, if the radio transmission is traveling to a planet that is 40 million kilometers away, it would require the radio transmission roughly 133.3 seconds to arrive.

To learn more about radio signals:

https://brainly.com/question/69373

#SPJ4

The container kept on the terrace of the taller building will have the highest level of water.

The level of water in a container depends on atmospheric pressure, and the atmospheric pressure decreases with height.

Atmospheric pressure, also known as air pressure, is the force exerted by the weight of air molecules in the atmosphere. It is measured in units of force per unit of area, typically in kilopascals (kPa) or pounds per square inch (psi).

Atmospheric pressure decreases with increasing altitude, as there are fewer air molecules above the earth's surface. At sea level, the average atmospheric pressure is approximately 101.3 kPa (14.7 psi), while at high elevations it can be significantly lower.

The taller building is higher up, so the atmospheric pressure on its terrace is lower than that at ground level, resulting in a lower water level in the container kept there.

The water level in the container kept on the terrace of the shorter building and the one kept in an open space will be at the same height, as they are both at ground level and have the same atmospheric pressure.

Therefore, The container kept on the terrace of the taller building will have the highest level of water.

To know more about atmospheric pressure refer to:

brainly.com/question/28310375

#SPJ4

The pressure of the helium inside a toy balloon in kpa is calculated to be 166770 kPa.

Pressure of helium = 1250 mm Hg

Converting into m Hg, we have,

p he = 1250/1000 = 1.25 m Hg

From the physical properties of Hg, we know,

ρ Hg = 13.6 g/cm³ = 13600 kg/m³

Gravity of the earth = 9.8 m/s²

The helium pressure inside a toy balloon is, in kPa,

p he = ρ g h = 13600 ×9.81 × 1.25 = 166770 kPa

Thus, the required pressure of the helium inside a toy balloon in kpa is calculated to be 166770 kPa.

To know more about pressure:

https://brainly.com/question/12983847

#SPJ4

The speed of the lander just before it touches the surface will be the highest it has been during its descent.

The speed of the lander just before it touches the surface can be calculated using the equation: v = √(2gh), where g is the acceleration due to gravity on the moon (1.6 m/s^2), h is the height above the surface, and v is the velocity.

Assuming h is a constant value, the velocity of the lander can be calculated as the square root of two times the acceleration due to gravity multiplied by the height. This equation is known as the equation of motion and is used to calculate the velocity of an object in free fall. It is important to note that the velocity will increase as the height decreases, so the speed of the lander just before it touches the surface will be the highest it has been during its descent.

Learn more about acceleration  :

https://brainly.com/question/605631

#SPJ4

SI unit is m^2C^2/j, the electron will accelerate because of attractive electric force, electron's acceleration increased by a factor of 1/100.

The unit for alpha is m^2C^2/J, which represents the ratio of an electron's momentum to the electric field acting on it.

The electron will accelerate towards the carbon atom because of the attractive electric force between the negatively charged electron and the positively charged nucleus of the carbon atom. This force is given by Coulomb's law:

F = k x q1 x q2 / r^2, where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.

The magnitude of the initial acceleration can be calculated using Newton's second law:

F = m x a, where m is the mass of the electron and a is its acceleration. Substituting the electric force from Coulomb's law gives:

= a

= F / m

= k x q1 x q2 / m x r^2

By the time the separation between the two has decreased to 10 nm, the acceleration of the electron has increased by a factor of (10 nm / 100 nm)^2 = 1/100.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

Based on the force exerted on the two objects, the potential energy equation is determined.The cannon ball was thus 35.7 meters high.

Based on the force exerted on the two objects, the potential energy equation is determined.P.E. = mgh, where m is the mass in kilograms, g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface), and h is the height in meters, is the formula for gravitational force.

A cannon ball weighs 40 kg and has a potential energy of 14000 J, according to the information provided.

We must ascertain its height.

We'll apply the formula.

P.E = mgh

h thus equals P.E./mg.

P.E. stands for potential energy.

kg is mass, and

Gravitational acceleration (g) (9.8 m/s2)

h is the displacement of the object's height in meters.

h = P.E. / mg

h = 14000 / 40 × 9.8

h = 14000 / 392

h = 35.7

The cannon ball was thus 35.7 meters high.

To learn more about cannon ball refer

https://brainly.com/question/818086

#SPJ1

Your spectroscope must be calibrated in order to account for systematic inaccuracy.  The helium discharge tube is a handy source of emission lines.

Spectrometers will inevitably drift over time as a result of impacts and effects from the environment. Regular wavelength calibration, which helps to assure accurate and dependable spectroscopic data, can readily address this prevalent problem. The wavelength calibration verifies that the grating's angular position setting and the wavelengths assigned to each pixel on the CCD array detector are correct. By analysing the spectra of an orange glass and a suspension of microalgae, the process is demonstrated.

This is accomplished by comparing the wavelengths you empirically determined to wavelengths discovered via research in the literature.

Learn more about the Spectrometer here: https://brainly.com/question/1852056

#SPJ4

The graph of x-t for the motion of the bumper between t=0 and t=2.00s is a straight line that starts at the origin (x = 0, t = 0) and ends at (x = 2, t = 2). This shows that the bumper moves with a constant speed of 2 m/s.

A graph is a visual representation of data or information. It typically includes a set of points that are connected by lines or curves to form a picture. Graphs are used to easily visualize trends, compare values, and show relationships between different data sets. They provide an effective way to communicate information to a wide range of audiences. Graphs can be used to illustrate almost any type of data, from population trends to stock market fluctuations.

This graph can be interpreted as follows: the bumper starts from rest (x = 0) at t = 0 and travels a distance of 2 meters in 2 seconds, meaning it has a constant velocity of 2 m/s. The slope of the line is equal to the velocity of the bumper, so m = 2 m/s. This means that for every 1 second that passes, the bumper moves 2 meters.

To learn more about graph

https://brainly.com/question/13877898

#SPJ4

Yes, the formula mentioned is correct.

The formula vw = f * λ describes the relationship between the speed of a wave, its frequency, and its wavelength. In this formula:

vw = speed of the wave (m/s)

f = frequency of the wave (Hz)

λ = wavelength of the wave (m)

Wavelength is a term used in physics to describe the distance between two consecutive points on a wave that is in phase with each other. It is an important parameter that characterizes a wave and can help describe its behavior and properties.

The wavelength of a wave determines its size, shape, and behavior in a medium. For example, long-wavelength waves (such as radio waves) can penetrate solid objects, while short-wavelength waves (such as gamma rays) are absorbed by solid objects.

This relationship can be derived from the definition of wave velocity, which is the speed at which a disturbance travels through a medium. The frequency of a wave is defined as the number of complete cycles of the wave that pass a given point in one second, while the wavelength is the distance between two consecutive points on a wave that is in phase with each other.

The formula vw = f * λ shows that the speed of a wave is directly proportional to its frequency and inversely proportional to its wavelength.

Therefore, Yes, the formula mentioned is correct.

To know more about wavelength refer to:

brainly.com/question/4112024

#SPJ4

Time is required for the motorcycle to change its speed from (a)23.5 to 33.5 m/s, and (b)53.5 to 63.5 m/s is 4 s.

Velocity is a vector quantity that measures the rate of change of the position of an object in a given direction. It is the speed at which an object is moving in a specific direction, usually measured in meters per second (m/s).

Velocity can be calculated by dividing the distance travelled by the time taken to travel that distance. It is the rate of change of an object's position in a given direction. Velocity can also be affected by acceleration, force, and gravity.

(a) Time required = (Final velocity - Initial velocity)/Acceleration

Time required = (33.5 - 23.5) / 4.59

Time required = 4 s

(b) Time required = (Final velocity - Initial velocity)/Acceleration

Time required = (63.5 - 53.5) / 4.59

Time required = 4 s

To learn more about velocity

Here: https://brainly.com/question/80295

#SPJ4

The speed of the object as we can see in the solution to the problem is obtained as 617 m/s.

We know that velocity is the ratio of the distance that have been covered to the time that have been taken. We have to note that the velocity is a vector quantity as as such the direction  is also quite very important.

Now we know that;

Horizontal Distance = 5601.24188 m

Time of Collision = 9.07818 s

Velocity =  5601.24188 m /9.07818 s

= 617 m/s

The speed is 617 m/s

Learn more about velocity:https://brainly.com/question/18084516

#SPJ1

The downward force caused by gravity will be the same as the normal force, that is the power of the elevators on this child's shoes. So, 98 newtons will be the typical force in this situation.

What does force in physics mean?

You can also use words like stretch and compress to describe force. Force is described in physics as the pull or push that causes a massed object to change its speed. Force is an outside agent that has the power to alter a body's resting or moving position.

What is a good instance of force?

When applied, force is an outside factor that modifies or tends to modifies a body's condition; if indeed the body is moving

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

The resulting charge on A is [tex]1.6 x 10^-7[/tex] C, and the resulting charge on B is [tex]-3.2 x 10^-7[/tex] C.

A charge is a property of matter that results from the presence or absence of electrons. It can be either positive or negative, and two objects with opposite charges will be attracted to each other, while two objects with the same charge will repel each other. The unit of charge is the Coulomb (C), which is defined as the amount of charge carried by 6.242 x 10^18 electrons. The concept of charge is important in many areas of physics, including electricity and magnetism, and plays a role in many natural phenomena and technological applications.

The charge on object A is [tex]-1.6 X10^-13[/tex]C.

When two million electrons are removed from object A, the charge on object A becomes more negative. The charge on object A can be calculated using the formula:

Q = Q - ne,

where Q is the original charge, n is the number of electrons, and e is the charge of an electron, which is -1.6 x 10^-19 C.

Therefore, the charge on object A becomes:

[tex]Q = -1.6 X 10^-13 C - (2X10^6)(-1.6X 10^-19 C)[/tex]

[tex]= -1.6 X 10^-13 C + 3.2X 10^-7 C[/tex]

= 1.6 x 10^-7 C

Object B starts as electrically neutral, which means that the total charge on B is 0 C. When two million electrons are placed on object B, the charge on object B becomes more negative. The charge on object B can be calculated using the formula:

Q = Q + ne,

where Q is the original charge, n is the number of electrons, and e is the charge of an electron, which is -1.6 x 10^-19 C.

Therefore, the charge on object B becomes:

Q = 0 C + (2 x 10^6)(-1.6 x 10^-19 C)

[tex]= -3.2 X 10^-7 C.[/tex]

So, the resulting charge on A is[tex]1.6 X 10^-7[/tex]C, and the resulting charge on B is [tex]-3.2X 10^-7[/tex] C.

To know more about electrons visit:

brainly.com/question/17066934

#SPJ1

A turntable that is initially at rest is set in motion with a constant angular acceleration a (alpha). What is the angular velocity of the turntable after it has made one complete revolution?

4√π.a

In physics, acceleration is the change in velocity within a certain unit of time. Generally, acceleration is observed as an object moving faster or slower. But acceleration is a vector quantity, so acceleration has both magnitude and direction. In other words, an object that is turning (eg a car that is still turning) also has acceleration too.

The SI unit of acceleration is m/s2. The acceleration dimension is L T-2.

In classical mechanics, the acceleration of an object with mass remains directly proportional to the resulting force acting on it and inversely proportional to its mass.

Learn more about Acceleration at

https://brainly.com/question/25876659.

#SPJ4

The pressure at the bottom of the 170-cm-thick water layer is 17,000 Pa.

The pressure at the bottom of the water layer can be calculated using the formula for pressure due to a fluid column:

P = ρgh

where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the height of the fluid column.

Since water has a density of about 1000 kg/m^3, the pressure at the bottom of the 170-cm-thick water layer is given by:

P = 1000 kg/m^3 * 9.8 m/s^2 * (170 cm / 100 cm/m)

P = 17,000 Pa

You can learn more about pressure  at

https://brainly.com/question/28012687

#SPJ4