explain 'read stability’ and 'writability’ by using hspice simulation

Answers

Answer 1

In HSPICE simulation, "read stability" and "writability" are terms used to describe the characteristics of a memory cell or storage element, typically in the context of non-volatile memory technologies such as Flash memory. Let's explore each term:

Read Stability: Read stability refers to the ability of a memory cell to retain its stored data accurately during a read operation. When a memory cell is accessed for reading, it should be able to maintain the stored information without significant degradation or disturbance.

In HSPICE simulation, read stability is evaluated by analyzing the voltage levels and waveforms at various nodes within the memory cell during a read operation. The simulation can assess factors such as leakage currents, parasitic capacitances, and noise sources that can affect the stability of the cell during read operations.

Writability: Writability refers to the ability of a memory cell to reliably accept and store data during a write operation. When a memory cell is programmed or written with new data, it should accurately and consistently store the desired information.

In HSPICE simulation, writability is evaluated by analyzing the voltage levels and waveforms at various nodes within the memory cell during a write operation. The simulation can assess factors such as programming voltages, write pulse durations, and any potential limitations or challenges that might affect the successful programming of the memory cell.

By simulating read stability and writability, designers can gain insights into the performance and reliability of memory cells under different operating conditions. This information can help in optimizing the memory cell design and ensuring that the memory system meets the desired specifications in terms of data retention and programming reliability

To know more about HSPICE .

https://brainly.com/question/14507624

#SPJ11

Answer 2

Read stability and writability are important characteristics of electronic circuits that can be analyzed through HSPICE simulation.

Read stability refers to the ability of a circuit to maintain the integrity of stored data during read operations. In other words, it ensures that the data stored in a circuit remains unchanged when it is being read. This is important for memory circuits, where the stored data needs to be accurately retrieved for further processing. HSPICE simulation can be used to analyze the read stability of a circuit by simulating a read operation and observing if there are any changes in the stored data.

Writability, on the other hand, refers to the ability of a circuit to accurately store new data when it is being written. This is important for memory circuits, where new data needs to be accurately written and stored for future retrieval. HSPICE simulation can be used to analyze the writability of a circuit by simulating a write operation and observing if the new data is being accurately stored.

Overall, HSPICE simulation is a powerful tool for analyzing the read stability and writability of electronic circuits, which are crucial characteristics for memory circuits.
Hi! Read stability and writability are two essential characteristics of a memory cell, often analyzed in HSPICE simulations.

Read stability refers to the ability of a memory cell to maintain its stored data during a read operation. In HSPICE simulations, read stability is evaluated by ensuring that the output voltage difference remains within acceptable limits when the cell is accessed for reading.

Writability, on the other hand, is the ease with which a memory cell can be programmed or updated with new data. In HSPICE simulations, writability is assessed by observing the voltage difference during a write operation and ensuring that it is sufficient to alter the memory cell's state reliably.

Overall, HSPICE simulations help designers optimize memory cells for read stability and writability, ensuring efficient and reliable operation.

To know more about your bolded word click here

https://brainly.com/app/ask?entry=top&q=read+stability

#SPJ11


Related Questions

When performing a vertical analysis which income statement item do you use to determine the cost contribution for each expense category? (What is the denominator?)

Review Later
Net income
Sales
Gross profit
Operating expenses

Answers

Sales represent the income statement item used in verticla analyses in order to determine the cost contribution for each expense category (Option C).

What is a vertical analysis?

In business, a vertical analysis represents a methodology used to examine financial statements that are ordered as specific points.

A vertical analysis analyzes numbers for only one period, conversely to the horizontal analyses that generally involve many different periods.

In conclusion, sales represent the income statement item used in verticla analyses in order to determine the cost contribution for each expense category (Option C).

Learn more about the vertical analysis here:

https://brainly.com/question/23963688

#SPJ1

An example of a power consuming device would be a(n) ____ while an example of a non-power consuming device would be a(n) ____.

Answers

An example of a power consuming device would be a(n) light bulb, a computer device while an example of a non-power consuming device would be a(n) switch or button.

What is power consumption?

The quantity of energy utilized per unit of time is known as power consumption. Power use is a significant factor in digital systems.

Power consumption is a limiting factor for the battery life of portable devices like laptop computers and cell phones.

Learn more about power consumption:
https://brainly.com/question/14860418
#SPJ1

g wastewater is to be treated with aerated lagoons. You are considering two different design options: A) A single lagoon with a surface area of 180 m2 B) Two lagoons in series with surface areas of 90 m2 each. All ponds have a depth of 2 m. The flow rate of wastewater is 5000 L/day. The waste contains 600 mg/L of organic material that is readily biodegradable with a first-order rate constant of 0.35 day-1. What final effluent concentration of organic material would you expect for each design

Answers

The answer is 3 because I just took the test!

A 50-mm cube of the graphite fiber reinforced polymer matrix composite material is subjected to 125-kN uniformly distributed compressive force in the direction 2, which is perpendicular to the fiber direction (direction 1). The cube is constrained against expansion in direction 3. Determine:

a. changes in the 50-mm dimensions.
b. stresses required to provide constraints.

Answers

Answer:

hello some parts of your question is missing attached below is the missing part

answer :

A) Determine changes in the 50-mm dimensions

The changes are : 0.006mm compression  in y-direction

                               0.002 mm expansion in x and z directions

B) the stress required are evenly distributed

Explanation:

Given data :

50-mm cube of graphite fiber reinforced polymer matrix

subjected to 125-KN force in direction 2,

direction 2 is perpendicular to fiber direction ( direction 1 ) and cube is constrained against expansion in direction 3

A) Determine changes in the 50-mm dimensions

The changes are : 0.006mm compression  in y-direction

                               0.002 mm expansion in x and z directions

B) the stress required are evenly distributed

attached below is the detailed solution

What advanced safety features are now standard on 2023 Z?

Answers

The advanced safety features that are now standard on 2023 Z are:

Pedestrian Detection and Automatic Emergency BrakingIntelligent Forward Collision Warning (IFCW).Blind Spot Alert.

What is 2023 Z?

The above is the short name or nickname for the All New 2023 Nissan Z coupe Sports car.

The care also features Advanced driver assist and safety technology which relieves the driver's everyday workload, allowing you to focus on what matters most.

Learn more about safety features in cars:
https://brainly.com/question/24078882
#SPJ1


The demand schedules for Jones, Smith, and other buyers are shown in the table below:
Draw the 4 demand curves for i) Jones ii) Smith iii) Other buyers and iv) All buyers.

Answers

The demand curve is the graphical representation of the relationship between the price of a good and the quantity demanded for a given period of time.

What is a demand schedule?

A demand schedule is a table which shows the quantity demanded of a good or service at different price levels.

A demand schedule can be graphed as a continuous demand curve on a chart where the Y-axis represents the price and the X-axis represents quantity.

Here, a typical representation, the price will appear on the left vertical axis, the quantity demanded on the horizontal axis.

Note that the complete information wasn't found and an overview was given.

Learn more about demand on:

https://brainly.com/question/1245771

#SPJ1

3) Explain how dc machines Can work as motor and generator​

Answers

The working principle of a DC machine is when electric current flows through a coil within a magnetic field, and then the magnetic force generates a torque that rotates the dc motor. The DC machines are classified into two types such as DC generator as well as DC motor.

Lab scale tests performed on a cell broth with a viscosity of 5cP gave a specific cake resistance of 1 x1011 cm/g and a negligible medium resistance. The cake solids (dry basis) per volume of filtrate was 20 g/liter. It is desired to operate a larger rotary vacuum filter (diameter 8 m and length 12 m) at a vacuum pressure of 80 kPA with a cake formation time of 20 s and a cycle time of 60 s. Determine the filtration rate in volumes/hr expected for the rotary vacuum filter.

Answers

Answer:

5.118 m^3/hr

Explanation:

Given data:

viscosity of cell broth = 5cP

cake resistance = 1*1011 cm/g

dry basis per volume of filtrate = 20 g/liter

Diameter = 8m ,  Length = 12m

vacuum pressure = 80 kpa

cake formation time = 20 s

cycle time = 60 s

Determine the filtration rate in volumes/hr  expected fir the rotary vacuum filter

attached below is a detailed solution of the question

Hence The filtration rate in volumes/hr expected for the rotary vacuum filter

V' = ( [tex]\frac{60}{20}[/tex] ) * 1706.0670

   = 5118.201 liters  ≈ 5.118 m^3/hr

A______solid-state relay is an electronic device that performs the same function as an electromechanical relay.

Answers

Answer: Non-programmable

Explanation:

A non-programmable solid-state relay is an electronic device that performs the same function as an electromechanical relay.

What is a solid-state relay?

An SSR is an electrical switching device that turns on or off when an external voltage (AC or DC) is applied across its control terminals. They perform the same job as an electromechanical relay, but because they include no moving parts, they have a longer operational lifetime.

Solid-state relays are the semiconductor analogs of electromechanical relays and can thus control electrical loads. When energized, the solid-state relay is a fairly complex device with a simple purpose: to activate a single output load.

Therefore, a non-programmable solid-state relay is a type of electrical device that functions similarly to an electromechanical relay.

To learn more about the solid-state relay, refer to the below link:

https://brainly.com/question/29315312

#SPJ2

How are new slip rings attached to the rotor core during alternator rebuilding?

Answers

The new slip rings is been  attached to the rotor core during alternator rebuilding by b. Soldered on.

What Soldering ?

Soldering serves as the way of joining  different types of metals together by melting solder.

This is been used on new slip rings to get it  attached to the rotor core during alternator rebuilding .

Learn more about Soldering on:

https://brainly.com/question/25759088

#SPJ1

CHECK THE COMPLETE QUESTION BELOW:

How are new slip rings attached to the rotor core during alternator rebuilding?

a. Machine clamped

b. Soldered on

c. Crimped on

d. epoxy glue

Airtight plugs are installed in the ends of large sizes of PVC conduit during bending to_____________.

Answers

Airtight plugs are installed in the ends of large sizes of PVC conduit before bending to  A. prevent the conduit from collapsing when heated.

What is Airtight plugs?

Airtight plugs is necessary in the  PVC conduit so as to be able to avoid the collapse of conduit.

In this case, Airtight plugs are installed in the ends of large sizes of PVC conduit before bending to  A. prevent the conduit from collapsing when heated.

Learn more about Airtight plugs on:

https://brainly.com/question/20704252

#SPJ1

For some alloy, the yield stress is 345-MPa (50,000-psi) and the elastic modulus (E) is 103-GPa (15x106 psi). What is the maximum load that may be applied to a specimen with a cross-sectional area of 130-mm2 (0.2-in2) without plastic deformation

Answers

The maximum load that may be applied to a specimen with a cross-sectional area of 130 mm² is; 35535 N

How to find Elastic Modulus?

We are told that for an alloy, the yield stress is 345-MPa and the elastic modulus (E) is 103-GPa.

Now, we want to find the maximum load that may be applied to a specimen with a cross-sectional area of 130-mm² without plastic deformation. Thus;

We are given the parameters;

Yield Stress; σ = 345 Mpa = 345 * 10⁶ Pa

Elastic Modulus; E = 103 GPa = 103 * 10⁹ Pa

Cross sectional Area; A = 130 mm² = 103 * 10⁻⁶ m²

Formula for stress without Plastic deformation is;

σ = F_max/Area

where;

σ is stress

F_max is maximum force

Area is Area

Thus making maximum force the subject of the formula gives;

F_max = σ * A

Plugging in the relevant values for stress and area gives us;

F_max = 345 * 10⁶ * 103 * 10⁻⁶

F_max = 35535 N

The maximum load that may be applied to a specimen with a cross-sectional area of 130 mm² is gotten to be 35535 N

Read more about Elastic Modulus at; https://brainly.com/question/6864866

#SPJ1

different lever designs can be engineered to alter the brake pedal effort required of the driver by using different levels of ?

Answers

Different lever designs can be engineered and developed to alter the brake pedal effort required of the driver by using different levels of mechanical advantage.

What is mechanical advantage?

Mechanical advantage can be defined as a ratio of the output force of a lever to the force acting on it (input force or effort), assuming no losses due to wear, flexibility, tear or friction.

This ultimately implies that, different lever designs can be suitably engineered and developed to alter the brake pedal effort (input force) that is required of the driver, especially by using different levels of mechanical advantage.

Read more on mechanical advantage here: https://brainly.com/question/18345299

#SPJ1

The need for extraction of raw metals for making steel has been reduced due to the?

Answers

Answer: Increase in minimills

Explanation:

A certain sine wave has a positive-going zero crossing at 0° and an rms value of 20 V. Calculate its instantaneous value at each of the following angles

Answers

Based on the positive-going zero crossing at 0° of the sine wave, the instantaneous value at 15° is 7.321V.

What is the instantaneous value?

At 15°, the instantaneous value is:

= 20√2 x Sin(angle)

Solving gives:

=  20√2 x Sin(15°)

= 7.321V

At angel 33°, the instantaneous value is:

=  20√2 x Sin(angle)

=  20√2 x Sin(33)

= 15.405V

At angle 70°:

=  20√2 x Sin(angle)

=  20√2 x Sin(70)

= 26.579V

The full question is:

A certain sine wave has a positive-going zero crossing at 0° and an rms value of 20 V. Calculate its instantaneous value at each of the following angles: a. 15° b. 33° c. 70°

Find out more on sine wave at https://brainly.com/question/14379001

#SPJ1

True or false? if i were to hook up an ac voltage source to a resistor, the voltage drop across the resistor would be in phase with the current in the circuit.

Answers

Answer: True

Explanation:

Waterbutt filtration system for pond. Water pressure principles, help needed?

I have water butt 1 and 2 working perfectly but as soon as I add another to the system water butt 1 and 2 start rising and overflowing.

Is there something I'm missing or doing wrong here? How does water leveling work?

Thanks all.

Answers

Water pressure principles is known to  state that the amount of Fluid pressure is said to be perpendicular to the surface on which it it exert or works on.

Note that  principle is shown by a vessel that is said to be having flat sides and has water. The pressure exerted by the weight of the water is therefore known to be perpendicular to the walls of the storage.

What is a Waterbutt used for?

A water butt is known to be a container that is made and also used to store a lot of rainwater.

Note that Water pressure principles is known to  state that the amount of Fluid pressure is said to be perpendicular to the surface on which it it exert or works on.

Learn more about Water pressure principles  from

https://brainly.com/question/14813457

#SPJ1

In order to live and grow, bacteria need moisture, food, the right temperature, and ______? Fill in the blank

Answers

Answer:

acidity, time,oxygen

Explanation:

These are some conditions for the growth of bacteria

Steam at 75 kPa and 8 percent quality is contained in a spring-loaded piston–cylinder device, as shown in Figure, with an initial volume of 2 m3 . Steam is now heated until its volume is 5 m3 and its pressure is 225 kPa. Determine the heat transferred to and the work produced by the steam during this process.

Answers

The heat transferred to and the work produced by the steam during this process  is 13781.618 kJ/kg

​How to calcultae the heat?

The Net Change in Enthalpy will be:

= m ( h2 - h1 ) = 11.216 ( 1755.405 - 566.78 ) = 13331.618 kJ/kg

Work Done (Area Under PV curve) = 1/2 x (P1 + P2) x ( V1 - V2)

= 1/2 x ( 75 + 225) x (5 - 2)

W = 450 KJ

From the First Law of Thermodynamics, Q = U + W

So, Heat Transfer = Change in Internal Energy + Work Done

= 13331.618 + 450

Q = 13781.618 kJ/kg

Learn more about heat on:

https://brainly.com/question/13439286

#SP1

A centrifugal pump levers water
to a boiter at the rate of 0.05mls
pressure rises across the
is 7 bar, the suction pipe 100m
I'm diameter, and delivering pipe
the
ритр
is 15mm diameter, the outlet
being 0.5m above the intet.
Calculate the efficiency of
the pump
the
kipe, it
power delivered to
the driving shaft is 45 kWatt

Answers

Answer:

Industrial users can select from numerous pump technologies for water supply and the handling of other liquid media. A particular favorite is the centrifugal pump. How do centrifugal pumps work? What different delivery principles are there? For which applications are centrifugal pumps especially well-suited?

Here we provide you an overview of the different types of centrifugal pumps. In addition, the operating principles are explained, and typical applications are listed also.

Explanation:

A +7.5% grade meets a horizontal grade on a section of a rural mountainous highway. If the length of the crest vertical curve formed in that section is 300 ft long, determine the safe operating speed on the highway.

Answers

Using the formula of comfort condition it is possible to determine the safe operating speed on the highway.

What is a deflection angle?

In physics, we define angular deviation as the angle resulting from the deflection of light when reflected from a prism. A prism has the ability to separate white light into several other colors, which are reflected by the object.

The comfort condition formula is given by: [tex]L=2(\frac{NV^{3} }{C} )^{\frac{1}{2} }[/tex]

Where, L is the length of the vertical curve, N is the grade, V is the safe speed operation and assuming the standart value for C (0,6 m/s3) it is possible to calculate:

[tex]C = 0,6 m/s^{3} = 1,968 ft/s^{3}\\ N= N1 - N2 = 7,5-0 = 7,5% = 0,075[/tex]

Changing the values in the formula:

[tex]L=2(\frac{NV^{3} }{C}){\frac{1}{2} } \\300 = 2(\frac{0,075.V^{3} }{1,968})^{\frac{1}{2} } \\V = 83,89 ft/s[/tex]

So, the safe operating speed on the highway is 83,89 ft/s.

See more about engineering at: brainly.com/question/12812715

#SPJ1

It is possible to design a reactor where the scy conductor and the nitrogen/ammonia electrode operate at different temperatures. Which combination of temperatures is expected to give the best results?.

Answers

The combination of temperatures that is expected to give the best result is option A: SCY temperature higher than electrode temp.

Why the case above?

The answer is option A because the proton conductivity of SCY is known to be one that often goes up along with increasing temperature, and the favorability of reaction goes down or reduces with total temperature.

Hence, It is said to be good for one to to keep the SCY conductor at a higher temperature and as such, The combination of temperatures that is expected to give the best result is option A: SCY temperature higher than electrode temp.

See options below

. Which combination of temperatures is expected to give the best results?

A.

SCY temperature higher than electrode temperature

B.

SCY temperature lower than electrode temperature

C.

SCY temperature the same as electrode temperature

D.

The temperature of the components does not make a difference.

Learn more about reactor from

https://brainly.com/question/15051406

#SPJ1

Determine the carburizing time necessary to achieve a carbon concentration of 0.30 wt.% at a position of 4 mm into an iron-carbon alloy that initially contains 0.10 wt.% C. The surface concentration is to be maintained at 0.90 wt.% C, and the treatment is to be conducted at C. Use the diffusion data for -Fe in Table 5.2

Answers

Answer:

the carburizing time necessary to achieve a carbon concentration is 31.657 hours

Explanation:

Given the data in the question;

To determine the carburizing time necessary to achieve the given carbon concentration, we will be using the following equation:

(Cs - Cx) / (Cs - C0) = ERF( x / 2√Dt)

where Cs is Concentration of carbon at surface = 0.90

Cx is Concentration of carbon at distance x = 0.30 ; x in this case is 4 mm = ( 0.004 m )

C0 is Initial concentration of carbon = 0.10

ERF() = Error function at the given value

D = Diffusion of Carbon into steel

t = Time necessary to achieve given carbon concentration ,

so

(Cs - Cx) / (Cs - C0) = (0.9 - 0.3) / (0.9 - 0.1)

= 0.6 / 0.8

= 0.75

now, ERF(z) = 0.75; using ERF table, we can say;

Z ~ 0.81; which means ( x / 2√Dt) = 0.81

Now, Using the table of diffusion data

D = 5.35 × 10⁻¹¹ m²/sec at (1100°C) or 1373 K

now we calculate the carbonizing time by using the following equation;

z = (x/2√Dt)

t is carbonizing time

so we we substitute in our values

0.81 = ( 0.004 / 2 × √5.35 × 10⁻¹¹ × √t)

0.81 = 0.004 / 1.4628 × 10⁻⁵ × √t

0.81 × 1.4628 × 10⁻⁵ × √t = 0.004

1.184868 × 10⁻⁵ × √t = 0.004  

√t = 0.004 / 1.184868 × 10⁻⁵

√t = 337.5903

t = ( 337.5903)²  

t = 113967.21 seconds

we convert to hours

t = 113967.21 / 3600

t = 31.657 hours

Therefore, the carburizing time necessary to achieve a carbon concentration is 31.657 hours

With _____, only one criterion must evaluate true in order for a record to be selected and with _____, all criteria must be evaluate true in order for a record to be selected.

a. parameter criteria, double criteria
b. function criteria, IF criteria
c. simple criteria, complex criteria
d. OR criteria, AND criteria

Answers

Answer:

d

Explanation:

OR criteria, AND criteria

In an OR criteria, it doesn't need all the records to be true. Just one record is enough and all other criterion becomes true.

In an AND criteria, it's unlike the OR criteria and works in opposite. It needs every member of the record to be true to be able to adjudge the whole record as true.

And as such, we have

With OR criteria, only one criterion must evaluate true in order for a record to be selected and with AND criteria, all criteria must be evaluate true in order for a record to be selected.

Consider fully developed flow in a circular pipe with negligible entrance effects. If the length of the pipe is doubled, the pressure drop will _____.

Answers

The answer is 6because I just took the test!

Where is the primary area for romanesque architectural sculpture?

Answers

Answer:

on the façade, entrance, and column capitals

The high-pressure fuel pumps used in gasoline direct-injection (GDI) systems are powered by ________.

Answers

Answer:

Camshaft

Explanation:

An isolated pretimed signalized intersection has an approach with a traffic flow rate of 750 veh/h and a saturation flow rate of 3200 veh/h. This approach is allocated 32 seconds of effective green time. The cycle length is 100 seconds. Determine the average approach delay a) 4,6 s b) 30.2 s c) 34.8 s d) 35.0 s​

Answers

Answer: This approach is allocated 32 seconds of effective green time. The cycle length is 100 seconds. Determine the average approach delay (using Eq. 7.27). A) 34.8 s.

Explain any three ways research can facilitate the work of building technicians

Answers

According to the research, research can facilitate the work of building technicians in the conception, materials to use and planning of the project.

What are building technicians?

They are experts in construction projects, supporting the design of plans, estimating costs, planning work methods, etc.

Research can facilitate the work of building technicians in the following ways:

Conception, design and planning of the project.Selection of materials for floor, wall and ceiling systems.Carry out the programming of works, budgets and analysis of unit prices.

Therefore, we can conclude that according to the research, research can facilitate the work of building technicians in the conception, materials to use and planning of the project.

Learn more about construction projects here: https://brainly.com/question/17083292

#SPJ1

What frequency bands are used primarily for short range distances select all the nearby?

Answers

The frequency bands that are used primarily for short-range distances include the following:

The upper portion of the VHF band (225 MHz to 300 MHz).The lower portion of the UHF band (300 MHz to 400 MHz).

What is GSM?

GSM is an abbreviation for global system for mobile communication and it can be defined as an open and digital cellular network technology that is designed and developed to be used for the transmission of both mobile voice and data services at the same time.

In Computer technology and networking, the global system for mobile communication (GSM) is typically designed and developed to operates at the following bands of frequencies:

850 MHz900 MHz1800 MHz1900 MHz

In this context, we can infer and logically deduce that the frequency bands that are used primarily for short-range distances such as PAN, include the following:

The upper portion of the VHF band (225 MHz to 300 MHz).The lower portion of the UHF band (300 MHz to 400 MHz).

Read more on frequency bands here: https://brainly.com/question/19097094

#SPJ1

Other Questions
What is the value of G o in kJ at 25 oC for the reaction between the pair:Ag(s) and Mn2+(aq) to give Mn(s) and Ag+(aq)Use the reduction potential values for Ag+(aq) of +0.80 V and for Mn2+(aq) of -1.18 V Suppose a 3 x 3 matrix A has only two distinct eigenvalues. Suppose that tr(A) = -3 and det(A) = -28. Find the eigenvalues of A with their algebraic multiplicities. If a substance is heated from an initial temperature of 20 oC to a final temperature of 70 oC, the sign of q (the amount of heat) for the substance will be:negativepositiveunable to predict as it depends on the specific heat capacity and mass of the substance surveys suggest that as many as _____ percent of all children and adolescents experience an anxiety disorder. today, the backbone of the internet is composed of numerous internet ________ points around the world. droplet nuclei can be involved in indirect transmission of diseases. True or false? how does the flashback describing isabellas first assignments affects the passage as a whole The first-order conditions for a monopoly to maximize profits are: Select one:O A. di(Q)/dQ -0. O B. dR(Qy/dQ - dC(Q)/dQ. O C. MR(Q) = MC(Q). O D. All of the statements associated with this question are correct Fill in the blanks below with the words that best complete the sentences: angst, idealist, ignorant, pity, stoic, dignity, vanity, humiliation, redemption, prototype, cunning, suspicion, audacity 2. She had a ____________________________ that her brother had a _________________________ plan in the works to get the last piece of birthday cake without anyone knowing. What is the parent function of y=-5(x-3)+7 since cos(x) = 8 17 and 180 < x < 270, the angle is in quadrant iii , and the half-angle is in the range Stock A has an expected return of 15%; Stock B has an expected return on 8% what is the expected return on a portfolio is comprised of 60% of Stock A and 40% of stock B?a) 10.8% b)12.2% c) 9.1% d) 14.4% A mother divided her land of 141/4 acres among her 5 adopted adult children. samuel received 11 acres, sophia received 9 acres, anthony received 8 acres, jasmine received 5 acres, and juan received 4 1/4 acres.which of the children received more land if the land was divided evenly among them compared to the way the mother divided it?a)anthonyb)jasminec)juand)sofia A company is designing a new cylindrical water bottle. The volume of the bottle will be 207 cm3. The height of the water bottle is 7.9 cm. What is the radius of the water bottle? Use 3.14 for pi. social psychologists report that viewing fictional scenes of a man overpowering and arousing a woman: Complete the equations. 95 1 0^3 =? 95 1 0^4=? 9510^5 =? how old was john adams when he signed the declaration of independence find a cartesian equation for the curve and identify it. r = 3 cos()a. hyperbola b. parabola c. circle d. ellipsee. limaon the density of helium is 0.164 kgm-3 what is this density in lbft-3? 1 m = 3.28 ft Spore-forming parasites of animals that are characterized by a structure at one end of the cell that facilitates the invasion of a host are members of what group