Answer:
At some point on say, the receiving screen, light emanating from the left side of the slit will be out of phase (a difference of 1/2 wavelengths) from light coming from the center of the slit.
Thus for every point that is left of the center of the slit, there will be a point on the right side of the slit that is out of phase,
There will be no light on the screen at that particular point and thus there will be a dark fringe there.
That is the basic explanation for the appearance of dark and bright fringes on the receiving screen.
how fast would u have to throw a baseball for it to catch on fire? (explanation in step by step equations)
Explanation:
Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s
Answer:
800 feet per sec.
Explanation:
Converting it over from 105.1mph to ft per sec is only about 154.15fps.
What is meant by the statement that the power of an electric heater is 1200W? What happens to the kinetic energy when the
velocity of a moving body is doubled?
The statement the power of an electric heater is 1200 W means that the electric heater used up 1200 J of electric energy in one second.
When the velocity of a moving body is doubled, its kinetic energy will become four times its initial kinetic energy.
What is power?Power is the rate at which energy is used up. The s.i unit of power is Watt (W).
From the question, if an electric heater is 1200 W, it means that the electric heater used up 1200 J of electric energy in one second
What is kinetic energy?Kinetic energy is the energy of a body in motion.
The formula for the kinetic energy of a body is given as
K.E = mv²/2From the equation above, it can be seen that if the velocity of a moving body is doubled, the kinetic energy of the body will become four times the initial kinetic energy of the body.
Hence, The statement the power of an electric heater is 1200 W means that the electric heater used up 1200 J of electric energy in one second.
When the velocity of a moving body is doubled, its kinetic energy will become four times its initial kinetic energy.
Learn more about electric power here: https://brainly.com/question/24858512
An archer shot a 0.04 kg arrow at a target. The arrow accelerated at 7,000 m/s2 to reach a speed of 60.0 m/s as it left the bow. How much force did the arrow have?
The force at which the arrow moved when an archer shot a 0.04 kg arrow at a target is 280 N.
What is force?Force is the product of mass and acceleration.
To calculate the amount of force the arrow moves, we use the formula below.
Formula:
F = ma............ Equation 1Where:
F = Force m = mass of the arrowa = acceleration of the arrow.From the question,
Given:
m = 0.04 kga = 7000 m/s²Substitute these values into equation 2
F = 0.04×7000F = 280 NHence, the force at which the arrow moved is 280 N.
Learn more about force here: https://brainly.com/question/18762601
I have been made into a body that can fly to every country. even though I am light, I am very strong. mention my name and my property
Answer:
Aeroplane
Explanation:
they have tail surfaces to stabilize the wings
A 10-A current is maintained in a simple circuit with atotal resistance of 209 ohm. What net charge passes through any point in a circuit during a 1-minute interval?
Answer:
I = Q / t definition of current I
Q = i t = 10 Coul/sec * 60 sec = 600 Coul
A 10-A current is maintained in a simple circuit with a total resistance of 209 ohms, then the net charge passes through any point in a circuit during a 1-minute interval would be 6000 Coulombs.
What is an electric charge?Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.
Electric current is defined as the charge per unit of time.
The mathematical relation between current and the electric charge
I =Q/T
Let us first convert the time period of minutes into seconds
1 min = 60 seconds
10 min = 10*60 seconds
=600 seconds
Q = I*t
=10*600
=6000 Amperes
Thus, the net charge that passes through any point in a circuit during a 1-minute interval would be 6000 Amperes.
To earn more about an electric charge from here, refer to the link;
brainly.com/question/8163163
#SPJ2
If the electric potential in a region is given by v(x)=7/x2 the x component of the electric field in that region is
Hi there!
Recall that:
[tex]\Delta V = -\int\limits^a_b {E \cdot } \, dx[/tex]
Given an electric field, the potential difference can be solved by using integration. Similarly:
[tex]E = -\frac{dV}{dx}[/tex]
We can differentiate the electric potential equation to solve for the electric field.
Use the power rule:
[tex]\frac{dy}{dx} x^n = nx^{n - 1}[/tex]
Differentiate the given equation.
[tex]-\frac{dV}{dx}\frac{7}{x^2} =- \frac{dV}{dx}7x^{-2} = -(-14x^{-3}) = \frac{14}{x^3}[/tex]
Or:
[tex]\boxed{E(x) = \frac{14}{x^3}}[/tex]
The component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2
What is an electric field?An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.
We have:
The electric potential in a region is given by:
[tex]\rm V(x) = \frac{7}{x^2}[/tex]
We know the relation between potential difference and an electric field is given by:
[tex]\rm \triangle V = \int\limits^a_b {E.} \, dx[/tex]
If the electric field is given, then:
[tex]\rm E = -\frac{dV}{dx}[/tex]
[tex]\rm E = -\frac{d(7x^{-2} )}{dx}[/tex]
After differentiate:
[tex]\rm E = -(-14x^{-3})[/tex] or
[tex]\rm E = \frac{14}{x^3}[/tex]
Thus, the component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2
Learn more about the electric field here:
https://brainly.com/question/26690770
#SPJ4
Identify the reactions of the citric acid cycle that provide reducing power for the electron‑transport chain
The reactions of the citric acid cycle that provide reducing power for the electron‑transport chain are as follows:
Conversion of isocitrate to α-ketoglutarateConversion of succinate to fumarateConversion of α-ketoglutarate to succinyl-coAWhat is citric acid cycle?Citric acid cycle also known as kreb cycle is a series of biochemical reactions that involves the synthesis of reduced electron carrier and ATP.
The following steps in the citric acid cycle involves the provision of reducing power for the electron‑transport chain:
Conversion of isocitrate to α-ketoglutarate: Isocitrate is converted to α-ketoglutarate as catalyzed by isocitrate dehydrogenase. Conversion of α-ketoglutarate to succinyl-coA: α-ketoglutarate is converted to succinyl-coA as catalyzed by α-ketoglutarate dehydrogenase.Learn more about citric acid cycle: https://brainly.com/question/11459709
The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:
Conversion of isocitrate to α-ketoglutarateConversion of α-ketoglutarate to succinyl-coAConversion of succinate to fumarate.Which citric acid cycle, provide reducing power?Citric acid cycle, is the tricarboxylic acid cycle (TCA), which is the combination of chemical reaction. This reaction is necessary to produce the energy in aerobic organisms.
The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:
Conversion of isocitrate to α-ketoglutarateConversion of α-ketoglutarate to succinyl-coAConversion of succinate to fumarate.Hence, the option 1,3 and 4 is correct.
Learn more about the citric acid cycle here;
https://brainly.com/question/11238674
#SPJ4
When using a different calorimeter, and mixing 50 ml of hot water at 65 degrees c with 60 ml of water in the calorimete
The specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.
Conseervation of energyThe heat capacity of the calirometer is determined by applying the principle of conservation of energy.
Heat lost by the hot water = Heat gained by the calirometer
[tex]Q _w = Q_c\\\\M_w C_w\Delta \theta _w = M_c C_c\Delta \theta _c[/tex]
where;
M is massmass = density x volume = ρV
Density of water = 1 g/ml
Mass of hot water = 1 x (50) = 50 g
Mass of water in calorimeter = 1 x (60) = 60 g
Equilibrium temperature[tex]\Delta T_c = 5.5\\\\T - 25 = 5.5\\\\T = 30.5 \ ^0C[/tex]
Specific heat capacity of the calirometer[tex]50 \times 4.184 \times (65 - 30.5) = 60 \times C_c \times (30.5 - 25)\\\\7217.4 = 330C_c\\\\C_c = \frac{7217.4}{330} \\\\C_c = 21.87 \ J/g^0C[/tex]
Thus, the specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.
The complete question is below
When using a different calorimeter, and mixing 50 ml of hot water at
65 degrees C with 60 ml of water in the calorimeter at 25 degrees C, the temperature of the calorimeter increased by 5.5 degrees C.
a. Calculate the heat capacity of this calorimeter?
Learn more about heat capacity here: https://brainly.com/question/16559442
The kinetic energy of a javelin is 81 J, and its speed is 9.0 m/s. What is its mass?
A. 0.5 kg
B. 1.0 kg
C. 2.0 kg
D. 9.0 kg
Answer:
2 kg
Explanation:
K.E. = 1/2 m v^2
81 = 1/2 m (9^2)
1 = 1/2 m
m = 2 kg
Emma wants to drive forward in her car. What does she need to do other than place her vehicle's gear in Drive and accelerate
She need to release the cluch slowly and apply force on the accelator other than place her vehicle's gear in Drive and accelerate
How we drive a car?We drive a car by applying pressure on the accelator, remove foot from the brakes and releasing cluch slowly. When the vehicle get speed, we have to change the gear.
So we can conclude that She need to release the cluch slowly and apply force on the accelator for driving a car.
Learn more about accelaration here: https://brainly.com/question/605631
Question 1(Multiple Choice Worth 2 points)
(04.05 LC)
The number of protons plus the number of neutrons in an atom is equal to its
O atomic number
O mass number
O nuclear model
O energy level
Question 2 Multiple Choice Worth 2 points)
Answer: Mass Number
Explanation:
Atomic number is the number of just protons;
Nuclear Model is a theoretical description of what an atom looks like;
Energy levels are the energy states that electrons are in;
However, mass number is by definition the number of protons + number of neutrons. :)
What is the molarity of 3 moles of nacl in 12 liters of water
Answer:
your mom g
Explanation:
DRACO SEASON WITH THE BOOK BAG
What does it mean for forces to be in equilibrium?.
Explanation:
If the size and direction of the forces on the object are exactly balanced , then there is no net force acting on the object
A crane lifts a 450 kg concrete to the top of a 50 m building in 5 s.
Assuming g= 10 m/s
)
2
a) The potential energy of the concrete.
, calculate;
b) The power developed by the crane
Explanation:
Given : m=600kg h=20 m
Time of operation t=2 min =120 s
Work done in lifting a box W=mgh=600×10×20=120000
Power required P=
t
W
=
120
120000
=1000 watts
What is involved when water changes from one phase to the next?
a
thermal energy
b
indirect energy
c
finite energy
d
ideal gas laws
Thermal energy is involved when water changes from one phase to the next. Option A is correct.
What is latent heat ?Latent heat is the heat needed for the phase change . When the temperature remains constant during melting or boiling, the added energy is employed in the phase change process.
The total number of water particles remains constant when water changes states throughout the water cycle.
When water alterations from one phase to the next, thermal energy is involved. Latent heat is the storage of thermal energy.
Hence, option A is correct.
To learn more about the latent heat, refer;
https://brainly.com/question/87248
#SPJ2
Non-Contact Forces Unit Test
Why is glass a good insulator? (1 point)
O The atoms in glass hold on tightly to their positively charged particles.
O The atoms in glass do not hold on tightly to their positivelycharged particles.
The atoms in glass do not hold on
Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.
What is an insulator?Insulators are those substances that do not conduct heat or electricity like their conductor counterparts.
Conduction of electric charges is as a result of the free flow of electrons in the atom of the substance.
Hence, a good insulator holds on tightly to its electrons and prevent them from flowing freely to conduct electric charges.
Therefore, Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.
Learn more about insulators at: https://brainly.com/question/24909989
It's the first answer, The atoms in glass hold on tightly to their positively charged particles.
- CONNECTIONS
---
much love <3
state two factors that affect the type of Shadows formed
Answer:
The two factors that affect the type of Shadows formed are stated below ::
The distance between the source of land and the object. The angel where the ray of light falls on the object.Answer:
The distance of the source of light from the object.
The angle at which the light rays fall on the object.
The size of the opaque object.
The size of the shadow depends on the distance of the source of light and on the angle at which the light rays fall on the object.
If the source of light is closer to the object, a larger shadow is formed than when the source of light is far from the object.
Explanation:
picture is in the top ️️️⬆️⬆️⬆️⬆️⬆️
It can be observed from the above figure that as the angle of light incident on the object changed the length of the shadow changed.
Hope you like this
In most cultures, the difference between the majority viewpoint and the minority viewpoint is that the majority group is made to feel __________ and the minority group is made to feel __________. A. Divergent. . . Normal B. Equal. . . Superior C. Superior. . . Equal D. Normal. . . Divergent Please select the best answer from the choices provided A B C D.
The difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.
What is the viewpoint?A vantage point or point of view from which something is viewed or assessed is known as the viewpoint The story is narrated from a variety of perspectives, including two major ones and several smaller ones.
Most studies comparing majority versus minority influence argue the author, places a premium on influence in the sense of prevailing. In this context.
There is evidence that majorities have greater public influence than minorities, and that minority impact when it happens, is mostly latent. In the current version,
Hence the difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.
To learn more about the viewpoint refer to the link;
https://brainly.com/question/1043206
Answer: D
Explanation:
Simplified for you.
By which factor is the sound intensity decreased at 3 meters?
StartFraction 1 over 9 EndFraction.
StartFraction 1 over 3 EndFraction.
StartFraction 1 over 2 EndFraction.
StartFraction 1 over 4 EndFraction.
Distance is the factor that decreased the sound intensity.
Which factor decrease sound intensity?As a sound wave carries its energy through a medium, the intensity of the sound wave decreases with increasing distance from the source.
So we can conclude that distance is the factor that decreased the sound intensity.
Learn more about sound here: https://brainly.com/question/9349349
#SPJ1
By a factor of 1/9, the sound intensity decreased at 3 meters. Option A is correct,
What is the relation between sound intensity and distance?Sound intensity is inverse proportional to the square of the distance.
The intensity of the sound is;
[tex]\rm I = \frac{1}{d^2} \\\\ \rm I = \frac{1}{3^2} \\\\ I=\frac{1}{9}[/tex]
By a factor of 1/9, the sound intensity decreased at 3 meters.
Hence, option A is correct,
To learn more about the sound intensity refer;
https://brainly.com/question/15089336
#SPJ1
The average speed of a car that travels 100 miles in 4 hours is
Why does a magnet exert force on another magnet when the two magnets are not in contact?
Answer:
1. Why does a magnet exert force on another magnet when the two magnets are not in contact? The magnetic field from north to south increases when they're closer together, and when they repel the repelling force increases as well. This is all due to the magnetic field.
Correct me if I'm wrong, Hope this helps
Favor(Brainliest)
#Carryonlearning
When a skydiver falls towards the Earth, the force of gravity from Earth pulls her towards the
Earth and she is obviously accelerating towards the Earth.
Can the reverse (the force of gravity pulls the Earth towards her and the Earth is accelerating
towards her) be true? Explain.
Answer:
yes
true
Explanation:
because earth is rotation
If a runner exerts 457 j of work to make 321 w of power then how long did it take the runner to do the work
The time taken by the runner to do the work is 1.42 seconds.
Given the data in the question;
Work done; [tex]W = 457J[/tex]Power; [tex]P = 321W[/tex]Time elapsed; [tex]t = \ ?[/tex]PowerPower can be simply referred to as the quantity of energy transferred per unit time.
It is expressed as;
[tex]P = \frac{W}{t}[/tex]
Where W is work done and t is time elapsed.
To determine the time it took the runner to do the work, we substitute our given values into the expression above.
[tex]P = \frac{W}{t} \\\\t = \frac{W}{P} \\\\t = \frac{457J}{321W} \\\\t = \frac{457 kgm^2/s^2}{321 kgm^2/s^3}\\\\t = 1.42s[/tex]
Therefore, the time taken by the runner to do the work is 1.42 seconds.
Learn more about Power and Work: https://brainly.com/question/2962104
A wave has a speed of 3.4m/s, if its frequency is 2.5 (Hz). What is the wavelength. Equation:
Speed= wavelength x frequency (Hz)
A. 25m
B. 10m
C. 1.36m
D. 0.73m
Answer:
1.36 meters
Explanation:
we just plug in the values into the formula given in the question
3.4/2.5 = answer
answer is 1.36
What are the two conditions for equilibrium of a rigid body? how would this experiment demonstrate their validity?.
Answer:
They're are Conditions .... (L00K D0WN.)
Explanation:
Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.
A coin has a mass of 7.0g. It is made of a metal alloy of density 5.6g/cm3. Calculate the volume of the coin.
[tex]\text{Density,}\\\\~~~~~~~~\rho = \dfrac mV\\\\\\\implies V = \dfrac m{\rho}\\\\\\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{\tfrac{5.6 \times 10^{-3}~ \text{kg}}{ 10^{-6} ~\text{m}^3} }\\\\ \\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{5.6 \times 10^{-3} \times 10^6~~ \text{kg}~ \text{m}^{-3}}\\\\\\ \implies V = 1.25 \times 10^{-6}~ \text m^3\\\\\\\implies V =0.00000125~ \text m^3\\\\\text{Hence the volume of the coin is 0.00000125}~ \text m^3[/tex]
A thundercloud has an electric charge of 48.8 C near the top of the cloud and –41.7 C near the bottom of the cloud. The magnitude of the electric force between these two charges is 7980000 N. What is the average separation between these charges
a/ 1.51 km
b/ 2.53 Km
c/ 1.51 m
d/ 1001 m
Answer: 1.51 km
Explanation:
Coulomb's Law: The electrostatic force between two charge particles Q: and Q2 is directly proportional to product of magnitude of charges and inversely proportional to square of separation distance between them.
Or, [tex]\vec{F}=k \frac{Q_{1} Q_{2}}{r^{2}}[/tex]
Where Q1 and Q2 are magnitude of two charges and r is distance between them:
Given:
Q1 = Charge near top of cloud = 48.8 C
Q2 = Charge near the bottom of cloud = -41.7 C
Force between charge at top and bottom of cloud (i.e. between Q: and Q2) (F) = 7.98 x 10^6N
k = 8.99 x 109Nm^2/C^2
So,
[tex]\begin{aligned}&7.98 \times 10^{6}=\left(8.99 \times 10^{9} \mathrm{Nm}^{2} / \mathrm{C}^{2}\right) \frac{48.8 \mathrm{C} \times 41.7 \mathrm{C}}{\mathrm{r}^{2}} \\&r=\sqrt{\frac{1.8294 \times 10^{13}}{7.98 \times 10^{6}}}=1.514 \times 10^{3} \mathrm{~m}=1.51 \mathrm{~km}\end{aligned}[/tex]
Therefore, the separation between the two charges (r) = 1.51 km
Suppose you have a 100 mhz cpu and a a/d converter with an 8 khz sampling rate. Samples of the a/d converter are 32-bits
The sampling rate that's given regarding the CPU will produce a rate of 256kps.
How to calculate the rate?The following can be gotten from the question:
Sampling rate = 8KHx
Number of bits = 32
The data rate will be:
= 32 × 8kbps
= 256kps
In conclusion, the sampling rate that's given regarding the CPU will produce a rate of 256kps.
Learn more about rates on:
https://brainly.com/question/2375289
The sampling rate specified for the CPU will result in a 256kb/s rate.Sampling rate is also known as the sampling frequency.
What is sampling rate?The number of samples per second collected from a continuous signal to create a discrete or digital signal is referred to as sampling rate or sampling frequency.
The given data in the problem is;
Sampling rate= 100 mhz cpu
Number of bits=32
The rate of the data is;
[tex]\rm R = 32 \times 8 kb/ s \\\\ \rm R = 256 kb / s \\\\[/tex]
Hence the sampling rate specified for the CPU will result in a 256kb/s rate.
To learn more about the sampling rate refer to the link;
https://brainly.com/question/18917438
#SPJ4
the connection between a medium and a mechanical wave
Answer:
The energy of a mechanical wave can travel only through matter. The matter through which the wave travels is called the medium (plural, media). The medium in the water wave pictured above is water, a liquid. But the medium of a mechanical wave can be any state of matter, even a solid.
Explanation:
Brainlest pls if can thank you ! i hope its helped
Use F = 1/T as your basis:
10. A stroboscope is set to flash every 8.00×10−5s. What is the frequency of the flashes?
The answer is 12,500 Hz but please show your work.
Now
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{8\times 10^{-5}}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.125(10^5)[/tex]
[tex]\\ \rm\rightarrowtail \nu=12500s^{-1}[/tex]
[tex]\\ \rm\rightarrowtail \nu=12500Hz[/tex]