explain about unt chemistry department scholarship

For 2g of magnesium: 3.31 g

For 10g of magnesium: 16.59 g

For 4kg of magnesium: 6.63 kg

The balanced chemical equation for the reaction is:

2 Mg + O2 → 2 MgO

The balanced chemical equation for the reaction is:

2 Mg + O2 → 2 MgO

From the equation, we can see that 2 moles of magnesium react with 1 mole of oxygen to produce 2 moles of magnesium oxide. Therefore, we can calculate the amount of magnesium oxide produced for each given mass of magnesium as follows:

Moles of Mg = mass / molar mass = 2g / 24.31 g/mol = 0.0823 mol

Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 0.0823 mol x 1 = 0.0823 mol

Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 0.0823 mol x 40.31 g/mol = 3.31 g

Moles of Mg = mass / molar mass = 10g / 24.31 g/mol = 0.4116 mol

Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 0.4116 mol x 1 = 0.4116 mol

Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 0.4116 mol x 40.31 g/mol = 16.59 g

Moles of Mg = mass / molar mass = 4000g / 24.31 g/mol = 164.47 mol

Moles of MgO produced = Moles of Mg x (2 moles MgO / 2 moles Mg) = 164.47 mol x 1 = 164.47 mol

Mass of MgO produced = Moles of MgO produced x molar mass of MgO = 164.47 mol x 40.31 g/mol = 6626.95 g or 6.63 kg

Calculation of Formula of Iron Oxide Produced:

According to the given information, 0.4 moles of iron reacts with 0.3 moles of oxygen gas. To determine the formula of the iron oxide produced, we need to first balance the chemical equation.

Fe + O2 → FeO

From the balanced equation, we can see that 1 mole of iron reacts with 1 mole of oxygen to produce 1 mole of iron oxide. Therefore, the ratio of moles of iron to moles of oxygen in the reaction is 1:1.

To do this, we can calculate the theoretical amount of moles of oxygen required to react completely with 0.4 moles of iron:

0.4 mol Fe × (1 mol O2 / 1 mol Fe) = 0.4 mol O2

Learn more on balanced chemical equation here

https://brainly.com/question/11904811

#SPJ1

The offered statement states that oxygen atoms are bonded to hemoglobin when it is in the R state.

The molecules that make up the human body are incredibly diverse, but they are all combinations of just a few dozen basic constituents: the elements of period 3 that are chemical. However, there are significant differences in each atom's abundance.

Chemical bonds, which are required for the existence of chemicals, are the temporary connections that bind compounds together. London dispersion forces and ionic, solid, and hydrogen bonds are examples of chemical bonding.

To know more about Molecules visit:

https://brainly.com/question/26556885

#SPJ4

The volume of the gas is 11.2 L

The mole is the standard unit of measurement for amount of substance in the International System of Units (SI). It is defined as the amount of a substance that contains the same number of entities as there are in 12 grams of carbon-12. This number of entities, known as Avogadro's number, is approximately 6.022 x 10^23.

If 1 mole could contain 6.02 * 10^23 molecules

x moles would contain  3.02 x 10^23 molecules

x =  0.5 moles

Then;

1 mole of the gas occupies 22.4 L

0.5 moles of the gas occupies 0.5 * 22.4/1

= 11.2 L

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

The lewis structure of the nitrogen is as follows :

      ..

    . N :

The atomic number of the nitrogen is 7. The electronic configuration of the nitrogen is as follows :

The electronic configuration of the nitrogen atom is 1s² 2s² 2p³.

the total number of the valence electrons that is the electrons in the outermost shell is 5. In the lewis structure of the nitrogen the valence electron are represented by the dot . therefore the lewis structure also be called the electron dot structure. Thus, the electron dot structure of the nitrogen is as follows :

    ..

    . N :

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

Ionic bonding considered both inter- and intramolecular bonding because molecules arrange themselves in a grid, and it's hard to tell where one molecule ends and the other begins.

option D

Ionic bonding is considered both inter- and intramolecular bonding because it involves the transfer of electrons from one atom to another to form ions, which are held together by electrostatic attraction.

Intramolecular bonding refers to the bonding that occurs within a single molecule, while intermolecular bonding refers to the bonding that occurs between molecules. In the case of ionic bonding, the attraction between ions of opposite charges within a single molecule constitutes intramolecular bonding, while the attraction between the ions of opposite charges in adjacent molecules constitutes intermolecular bonding.

Option (d) is not entirely accurate because the arrangement of ions in an ionic lattice is not based on the formation of individual molecules but rather on the organization of ions in a repeating pattern. However, it is true that the boundaries between individual molecules are not well-defined in an ionic lattice.

Learn more about ionic bond here: https://brainly.com/question/6577485

#SPJ1

The examples of symbols that can be used include

"+" for addition

"-" for subtraction

"*" or "×" for multiplication

"/" or "÷" for division

"%" for percentage

"$" for dollars

"#" for number (e.g. #1 = number one)

"&" for and

"!" for exclamation or negation.

A mark, sign, or term that denotes, denotes, or is taken to denote an idea, an item, or a relationship is known as a symbol. By connecting seemingly unrelated ideas and events, symbols help people look beyond the known and the visible.

Symbols are used to communicate ideas and beliefs by using words, noises, gestures, thoughts, or visual representations.

Learn more about symbol on:

https://brainly.com/question/29886201

#SPJ1

To convert between moles and molecules, we can multiply the number of moles by Avogadro's number: [tex]6.02*10^{23}[/tex]

To convert between moles and mass, multiply the moles by the molar mass of the compound.

We're given:

Divide this by Avogadro's number:

[tex]\dfrac{6.15*10^{25}}{6.02*10^{23}}\\\\= 102.1594684\hspace{4}mol[/tex]

Multiply by molar mass (44.01 from Chemspider):

[tex]102.1594684*44.01\\=4.5*10^3\hspace{4}g[/tex]

[tex]4.5*10^3\hspace{4}g[/tex]

The energy movement from solid liquid to gas is always going up and moving faster. A solid is a tight definite shape where the molecules are all stuck in one place and there’s barely energy and movement. The liquid has a more free space since it does not have a definite volume energy moves around quicker. The gas phase would have energy going everywhere Becuase it doesn’t have a definite shape and volume. As temperature goes up the kinetic energy also goes up

The human body is composed of a diverse set of elements, but only a few of them make up the majority of its mass. The two major components of the human body, making up at least 3% each, are oxygen (O) and carbon (C).

Oxygen is the most abundant element in the human body, comprising about 65% of the total mass. It is essential for the body's metabolic processes, as it is a major component of many organic molecules, including carbohydrates, lipids, and proteins. Oxygen is also necessary for respiration, as it is used in the production of energy through the process of cellular respiration.

Carbon is the second most abundant element in the human body, making up about 18% of its total mass. It is the backbone of many organic molecules, such as carbohydrates, lipids, and proteins, and is the basis of all life on Earth. Carbon is also found in many minerals in the human body, such as calcium carbonate, which makes up bones and teeth.

Other elements that are present in the human body in smaller amounts include hydrogen (H), nitrogen (N), calcium (Ca), and phosphorus (P). Hydrogen is the most common element in the universe and is present in many organic molecules. Nitrogen is also found in organic molecules, such as amino acids and nucleic acids, and is essential for building and repairing tissue. Calcium and phosphorus are both important for building strong bones and teeth.

In summary, oxygen and carbon are the two major components of the human body, making up at least 3% each. These elements are essential for the body's metabolic processes, energy production, and the formation of organic molecules. While other elements are present in smaller amounts, they are also essential for the body's overall health and well-being.

To know more about human body: https://brainly.com/question/11738302

#SPJ4

When m-xylene is brominated with bromine while ferric bromide is present, the product is 1-bromo-2,4-dimethylbenzene.

M-bromonitrobensene is the main product created when nitrobenzene is treated with [tex]$$Br_2[/tex] in the presence of [tex]$\mathrm{FeBr}_3$[/tex].

If [tex]$\mathrm{FeBr}_3$[/tex] or [tex]$$AlBr_3[/tex] are not added to produce the electrophile Br+, benzene will not react with [tex]$$Br_2[/tex] ([tex]$\mathrm{FeCl}_3$[/tex] and [tex]$$AlCl_3[/tex] can also be used, but may contaminate the products with chlorine). There won't be any reaction if the metal chloride is absent, hence there won't be any colour change.

When m-xylene is brominated with bromine while ferric bromide is present, the product is 1-bromo-2,4-dimethylbenzene. Since methyl groups are ortho para directing, the replacement takes place at a site that is ortho to one methyl group and para to another methyl group in this electrophilic aromatic substitution reaction.

The complete question is:

What product are formed when the following compound is treated with [tex]$\mathrm{Br}_2$[/tex] in the presence of [tex]$\mathrm{FeBr}_3$[/tex]?

To learn more about compound refer to:

https://brainly.com/question/26487468

#SPJ4

Plasma is the states of matter which have the most energy. Generally, there are four states of matter.

Plasma is one of four states of matter portrayed by the presence of a critical piece of charged particles in any mix of particles or electrons.[1] It is the most plentiful type of conventional matter known to man, being for the most part connected with stars, including the Sun Reaching out to the thin intracluster medium and potentially to intergalactic locales, plasma can be falsely created by warming an unbiased gas or exposing it to a solid electromagnetic field.

The presence of charged particles makes plasma electrically conductive, with the elements of individual particles and plainly visible plasma movement administered by aggregate electromagnetic fields and exceptionally delicate to remotely applied fields.The reaction of plasma to electromagnetic fields is utilized in numerous cutting edge gadgets and advances, for example, plasma TVs or plasma etchin

To know more about plasma,visit here:

https://brainly.com/question/18207038

#SPJ4

The heat released is equal to the heat gained. Hence, the final temperature is 62.5∘ C.

A temperature gradient is a physical quantity that describes in which direction and at what rate the temperature changes the most rapidly around a particular location. The temperature gradient is a dimensional quantity expressed in units of degrees per unit length. The SI unit is kelvin per meter.

In weather forecast and climate, the differences between the air temperature between between different locations. The planetary surface's absorption of solar light raises the temperature gradient and may cause convection (a major process of cloud formation, often associated with precipitation). Since meteorological fronts are the boundaries between air masses with distinctly different characteristics, the horizontal temperature gradient may reach relatively high values in these areas.

To learn more about temperature , click the link below :

https://brainly.com/question/11464844

#SPJ1

The process of nuclear fusion will occur.

Under immense pressure and heat, protons at the center of an object can undergo a process called nuclear fusion, where two or more atomic nuclei combine to form a heavier nucleus, releasing a large amount of energy in the process. This is the process that powers stars, including our sun.

In the core of a star, for example, the immense pressure and heat cause hydrogen nuclei (protons) to collide and fuse together to form helium nuclei. This process releases a tremendous amount of energy in the form of light and heat, which ultimately keeps the star shining and stable.

Learn more about proton:https://brainly.com/question/1252435

#SPJ1

The name of the organic compound CH₃CH₂CH₂CH₃ is butane.

Butane is an alkane with four carbon atoms and a straight chain. The prefix "but-" indicates four carbon atoms, and the suffix "-ane" indicates that the molecule is an alkane with all single bonds between the carbon atoms.

The molecular formula for butane is C₄H₁₀. Butane is a highly flammable gas at room temperature and pressure, and it is commonly used as a fuel for lighters, camping stoves, and other portable heaters. It is also used as a refrigerant, propellant, and solvent in various industrial applications.

It is a member of the homologous series of alkanes, which have the general formula CnH₂n+2, where n is the number of carbon atoms in the molecule.

To know more about organic compound here

https://brainly.com/question/5994723

#SPJ4

The term used to describe breaks in the Earth's crust by which rocks move or slide past one another is "fault." Faults can be caused by tectonic plate movement.

Faults generates stress on the Earth's crust. When the stress becomes too great, the rocks along the fault plane can break and move, resulting in an earthquake. There are different types of faults, including normal faults, reverse faults, and strike-slip faults, depending on the direction of movement between the rocks.

Faults are essential in shaping the Earth's surface, and studying them can help geologists better understand the past and future movements of tectonic plates.

To know more about tectonic plate movement:

https://brainly.com/question/28988009

#SPJ4

The energy absorbed by the chemical reaction is 200 kJ. 200 kJ is the thermal energy that moves inward from the air or the walls of the container. Therefore, the correct option is option D.

Thermal energy is a sort of kinetic energy since it is generated by particle movement. Kinetic energy refers to the energy that an item possesses as a result of its motion. The more the form of heat of a body, the faster its atoms, molecules, or atoms travel.

A chemical reaction is carried out in a closed container. The energy absorbed by the chemical reaction is 200 kJ. 200 kJ is the thermal energy that moves inward from the air or the walls of the container.

Therefore, the correct option is option D.

To know more about thermal energy, here:

https://brainly.com/question/3022807

#SPJ1

The mass of sulfuric acid in 2.00 mL of 18.5 M [tex]H_{2} SO_{4}[/tex] is 37.0 mg. Sulfuric acid has a molar mass of 98 g/mol.

To calculate the mass of sulfuric acid in 2.00 mL of 18.5 M [tex]H_{2} SO_{4}[/tex], we need to first convert the volume from milliliters to liters and then multiply that by the concentration in moles/liter. Then, we can multiply the number of moles by the molar mass to get the mass in grams. The mass of 2.00 mL of 18.5 M [tex]H_{2} SO_{4}[/tex] is:

Learn more about  concentrated sulfuric acid:

https://brainly.com/question/8673785

#SPJ4

A chemical reaction is usually accompanied by easily observed physical effects such as heat and light emission, precipitate formation, gas evolution, or color change.

A chemical reaction is a process that converts one or more substances, known as reactants, to one or more different substances, known as products.

A graph can be used to depict the relationship between two values, the dependent and independent variables. A measurable variable whose value is determined by the independent variable.

Graphs and charts condense large amounts of information into simple formats that communicate key points clearly and effectively.

Thus, Physical effects such as heat and light emission, precipitate formation, gas evolution, or color change are typically observed during a chemical reaction.

To learn more about the chemical reaction, follow the link;

https://brainly.com/question/29762834

#SPJ1

Answer:

calcium oxide

Explanation:

Correct option is A)

Magnesium metal is an alkaline earth metal. The tendency of these metals is to lose electron. They lose electron and form oxide. Now, they are stable hence it is very difficult for them to again gain that electron. Hence, they are not reduced by normal reducing agents.

The molecule of chlorine Cl₂ is nonpolar covalent in nature.

A single covalent link holds the two Cl atoms together. The positive Cl atom's nucleus and the covalent bond's negative electron pair are attracted to one another.

Cl₂ molecule of gas is made up of two chlorine element atoms. As a result, Cl₂ won't show metallic boding. Cl₂ must be covalent since an ionic bond can only be formed when a metal and a non-metal come into the contact. As a result, we deduce that the chlorine molecule is non-polar covalent.

To know more about nonpolar compounds, visit,

https://brainly.com/question/545359

#SPJ4

Answer:

They don't have to deal with the Earth's atmosphere

Explanation:

Space telescopes have the advantage of being above the blurring effects of the Earth's atmosphere

When an alkene is treated with H2H2, the addition can occur from either face of the double bond, resulting in two different stereoisomers.

This is known as syn addition because the two hydrogen atoms are added to the same face of the alkene. The stereoisomers that result from the addition of H2 to an alkene will depend on the specific alkene and the arrangement of its substituents.

For example, when 1,2-dimethylcyclohexene is treated with H2H2, two stereoisomers are formed: (1R,2S) and (1S,2R). These stereoisomers can be differentiated by their molecular configurations, which are determined by the arrangement of the substituents on the cyclohexene ring and the position of the hydrogen atoms on the double bond.

Similarly, other alkenes will give rise to different stereoisomers upon syn addition of H2, depending on the specific alkene and its substituents.

To learn more about Stereoisomers:

https://brainly.com/question/16986110

#SPJ4

A solid that forms and settles out of a liquid mixture is called suspension /precipitate.

A suspension is a heterogeneous mixture in which some of the particles settle out of the mixture upon standing. The particles in a suspension are far larger than those of a solution, so gravity is able to pull them down out of the dispersion medium (water). Suspensions are considered heterogeneous because the different substances in the mixture will not remain uniformly distributed if they are not actively being mixed.

An example of a suspension would be sand in water. The suspended particles are visible under a microscope and will settle over time if left undisturbed.

To know more about the suspension, here

brainly.com/question/17650174

#SPJ4

The partial pressure of oxygen in the dry air, given the partial pressure of the rest gases is 21.22 KPa (Last option)

From Dalton's law of partial pressure, we understood taht the partial pressure of the gases present in a system is given as follow:

Total pressure = Partial pressure of gas A + Partial pressure of gas B

With the above formula, we can determine the partial pressure of oxygen. Details below:

Total pressure = Partial pressure of nitrogen + Partial pressure of carbon dioxide + Partial pressure of argon and other gas + Partial pressure of oxygen

101.32 = 79.11 + 0.04 + 0.95 + Partial pressure of water vapor

101.32 = 80.1 + Partial pressure of water vapor

Collect like terms

Partial pressure of oxygen = 101.32 - 80.1

Partial pressure of oxgyen = 21.22 KPa

Thus, the partial pressure of oxygen is 21.22 KPa (Last option)

Learn more about partial pressure:

https://brainly.com/question/15577259

#SPJ1

Molarity is also defined as the moles of a solute per liters of a solution. 1.36 grams of sucrose do you need to make 400mL of a 0.2M solution.

The term molarity (M) is defined as the amount of a substance in a certain volume of solution. Molarity is also defined as the moles of a solute per liters of a solution.

Given:

Molar mass of sucrose, M= 342.297 g/mol.

Volume of the solution,V= 400mL=0.4L

Molarity, S= 0.01M

Mass of the sucrose,W=?

W =S M V

= 0.01 × 342.297 ×0.4

= 1.36 grams

Thus, 1.36 grams of sucrose do you need to make 400mL of a 0.2M solution.

To learn more about the molarity, follow the link;

https://brainly.com/question/8732513

#SPJ9

The value of 0.0098 g in micrograms using dimensional analysis is 98 micrograms.

Dimensional analysis is a mathematical technique used to translate measuring units across different systems.

To convert 0.0098 g to micrograms, we can use dimensional analysis by multiplying the given weight in grams by a conversion factor.

The conversion factor that can be used is 1 microgram = 10⁻⁶ g.

Using this conversion factor, we can write the following equation:

0.0098 g = 0.0098 g * (10⁶6 µg/1 g)

0.0098 g = 98 µg

Therefore, 0.0098 g is equal to 98 micrograms.

Learn more about dimensional analysis at: https://brainly.com/question/27931891

#SPJ1

A compound that adds a few OH ions to water is referred to as a base.

This is referred to as a substance that can neutralize the acid by reacting with hydrogen ions. Most of them are minerals that react with acids to form water and salts and some examples include the oxides, hydroxides of metals etc.

They are also known as any compound that yields hydroxide ions (OH-) when dissolved in water thereby resulting in its addition and is the reason it was chosen as the correct choice.

Read more about Base here https://brainly.com/question/12445440

#SPJ1

The given statement "An emission spectrum produced by container of the hydrogen gas. when we changing the amount of hydrogen in the container will change the colors of lines in the spectrum" is true. Because the colors of the lines in the emission spectrum produced by a container of hydrogen gas depend on the energy levels of the hydrogen atoms.

The emission spectrum produced by a container of hydrogen gas contains a series of discrete lines corresponding to the specific wavelengths of light emitted when excited hydrogen atoms release energy. The colors of these lines are determined by the energy differences between the electron energy levels involved in the transitions.

Changing the amount of hydrogen in the container would alter the number of hydrogen atoms that can emit light, and thus, the intensity of the lines in the spectrum. It would not, however, affect the energy differences between the electron energy levels, and therefore, the colors of the lines would remain the same.

To know more about emission spectrum here

https://brainly.com/question/13537021

#SPJ4