The mechanical procedure of peeling is often referred to as exfoliation. Exfoliation is the term used to describe the process whereby rock sheets gradually separate from exposed rocks along fissures.
A description of mechanical weathering is given here:By using mechanical means, rocks and minerals are broken apart. Their chemical make-up does not alter. A big rock mass can be physically weathered into smaller, more easily moved, and more readily eroded pieces. Even enormous rocks frequently break along weak spots in nature. Exfoliation in metamorphic rocks, joints in huge igneous rocks, and bedding planes in sedimentary rocks are a few of the most typical.
To learn more about mechanical weathering refer to;
brainly.com/question/15067483
#SPJ4
Organic chemistry is defined as the study of compounds containing which element?
Organic chemistry is defined as the study of compounds containing carbon element .
In an organic chemistry, we study about structure, properties , composition, reaction and preparation of carbon congaing compounds.The organic compound is contains mainly carbon and hydrogen and other elements. The other elements in organic compounds are nitrogen, oxygen,sulfur, phosphorus, halogen and etc.
Organic chemistry is also refer as carbon chemistry .The carbon element is important because it is center elements of living organism and it is very basic for all live in the earth. By studying about organic chemistry , scientist get to know about human body and living organism.
learn about organic chemistry,
https://brainly.com/question/14623424
#SPJ4
Which of these is an example of investigating an intensive property?
Oweighing sand in a bag
Omeasuring the length of wire
O determining if a rock is magnetic
Orecording the volume of water in a cylinder
An example of investigating an intensive property is determining if a rock is magnetic. That is option C.
What is intensive property?Intensive property is defined as the property of a substance that doesn't rely on the amount of the substance.
Examples of Intensive property include:
colour, melting point, boiling point, andMagnetic propertiesLearn more about magnetic properties here:
https://brainly.com/question/14411049
#SPJ1
A 25. 00 ml sample of acetic acid containing phenolphthalein indicator is titrated with 0. 1067 m naoh. The solution changes color after 30. 07 ml naoh has been added. What is the concentration of the acetic acid before titration?.
The concentration of the acetic acid before titration is 0.128M
For weak acid and strong base titration-
Moles of acetic acid = moles of NaOH
Given concentration of NaOH = 0.1067M
Volume of NaOH = 30.07ml = 0.03007L
Using the formula, Concentration = Moles/Volume
Moles of NaOH = concentration X volume = 0.1067 X 0.03007 = 0.0032
Therefore, moles of acetic acid = 0.0032mole
Using the formula, Concentration = Moles/Volume
Concentration of acetic acid = 0.0032/0.025 = 0.128M
Learn more about titration -
https://brainly.com/question/23307058
#SPJ4
A 50.7 g meta l ro d is hea'ted t o 92. 3 degree s Celsius. I t is adde d t o a calorimete r fille d wit h 25.O g o f wate r a t 23. 0 degree s Celsius. Wha t is th e fina l temperatur e o f th e mixture
Answer:
Can you be more clear with your question
Which element is the most reactive?
A. sodium
B. nickel
C. carbon
D. oxygen
Answer:
correct answer is sodium
Explanation:
element is most active in this question is sodium please make me Brilliant to this correct answer
Which of the following is a statement that describes a problem that can be solved using technology design?
The cat will be sprayed with water when it jumps on the couch.
A hockey player needs a stronger shot.
The smoke from a forest fire is causing health issues.
The living room needs to be cleaned.
Answer:
the smoke one
Explanation:
it can be made aware of and people can raise money to stop it/ help it
Ionization energy is the energy required to remove an electron from an atom in the gas phase. The ionization energy of gold is 890.1 kJ/mol. Calculate the maximum wavelength of light that will ionize gold.
Ionization of Gold:
The maximum wavelength of light that will ionize gold is 134.5 x 10 ⁻⁴m
Calculation:
1 mole requires = 890.1kJ = 8.901×10⁵ J
The energy needed to ionize a single atom = Divide it by Avogadro's number (6.0221409×10²³)
Thus, 1 atom requires = 8.901×10⁵ J / 6.0221409×10²³ J
= 1.478×10⁻¹⁸ J
The Energy of photon = E = hc/λ where,
h = Planck constant (6.626070040Ă—10â’34 Js)
λ = the wavelength
c = the speed of light
Putting the values:
E = 1.478×10⁻¹⁸ J
h =6.63x10⁻³⁴ Js
c = 3 x 10⁸ m/s
λ = ?
λ = hc/E
= (6.63x10⁻³⁴ x 3 x 10⁸ ) / 1.478×10⁻¹⁸
= 134.5 x 10 ⁻⁴m
Learn more about the ionization energy here,
https://brainly.com/question/6685711
#SPJ4
Solid silver bromide and aqueous potassium nitrate are produced by the reaction of aqueous silver nitrate and aqueous potassium bromide .
For the mentioned reaction, the balanced chemical equation is:
KBr (aq) + AgNO3 (s) → KNO3 (aq) + AgBr(s)
The number written in front of the ion, atoms, and molecules in a chemical reaction so that each of the elements on both the sides of reactants and products of the equation gets balanced is known as the stoichiometric coefficient.
What happen when aqueous silver nitrate reacts with aqueous potassium bromide ?From the mentioned balanced equation, the stoichiometric coefficient before KBr is 1, AgNO3 is 1, KNO3 is 1, as well as before AgBr is also 1. Thus, it is clear that 1 mole of potassium bromide reacts with 1 mole of silver nitrate to produce 1 mole of potassium nitrate and 1 mole of silver bromide.
Learn more about Silver nitrate reacts with aqueous potassium bromide here:
https://brainly.com/question/17178254
#SPJ4
IF 500 ml 0.1 mol Hcl reacts with 500 ml 0.01 mol NaoH... calculate the no. of moles of nacl formed
Answer:
0.01 moles NaCl
Explanation:
It seems that the given volumes are unnecessary information.
To find the moles NaCl, you need to convert moles HCl and NaOH to moles NaCl via the balanced chemical equation. Specifically, you need to use the mole-to-mole ratio made up of the reaction coefficients. The reason why you need to convert both reactants is because you have not been given a limiting reagent. The smallest amount of moles NaCl calculated will be the final answer.
The balanced reaction:
HCl + NaOH -----> NaCl + H₂O
0.1 moles HCl 1 mole NaCl
---------------------- x ---------------------- = 0.1 moles NaCl
1 mole HCl
0.01 moles NaOH 1 mole NaCl
----------------------------- x ----------------------- = 0.01 moles NaCl
1 mole NaOH
NaOH produces the smallest amount of product. This means it is completely used up before HCl runs out. Therefore, NaOH is the limiting reagent and 0.01 moles NaCl are actually produced.
What is the stoichiometric coefficient in front of the oxygen (o2) in the balanced version of this reaction? c4h8(l) o2(g) â co2(g) h2o(g) (unbalanced)
The stoichiometric coefficient in front of the oxygen ([tex]O_{2}[/tex]) in the balanced version of the reaction will be 6.
The number that must be present before the atoms, molecules, or ions is known as the stoichiometric coefficient. Fractions, as well as whole numbers, can be used as stoichiometric coefficients. Essentially, the coefficients assist us in determining the mole ratio of reactants to products.
The balanced chemical reaction will be
[tex]C_{4} H_{8} +6O_{2}[/tex] → [tex]4CO_{2} +4H_{2} O[/tex]
It can be seen that the stoichiometric coefficient in front of oxygen is 6.
Therefore, stoichiometric coefficient in front of oxygen will be 6.
To know more about stoichiometric coefficient
https://brainly.com/question/15047541
#SPJ4
A lake experiences episodic acidification, in which the pH drops to 5.0. A scientist studying the lake sees trout and perch disappear from the lake over time. What would be a reasonable explanation for the disappearance of these fish
A reasonable explanation for the disappearance of these fish is the high acidity affecting fish metabolism.
What is the ideal pH for fish?pH is a very important parameter to consider, as it has a direct effect on the metabolism and physiological processes of fish and other aquatic organisms. The pH tolerance range for fish is between 4.0 and 9.0, while the ideal index is between 6.5 and 8.0
With this information, we can conclude that The various fish species differ in terms of the best pH. The pH range between 6.5 – 9.0 is generally recommended for freshwater species. For marine species, the most recommended PH range is between 7.8-8.4.
Learn more about pH for fish in brainly.com/question/7529393
#SPJ1
Which set of elements contains a metalloid?
Oa. Ba, Ag, Sn, Xe
O b. Fr, F, O, Rn
O c. Li, Mg, Ca, Kr
O d. K, Mn, As, Ar
Answer:
D.) K, Mn, As, Ar
Explanation:
The metalloids are located in the p-block on the periodic table and have a ladder-like arrangement.
The most commonly recognized metalloids are:
boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te)
What's partial negative charge and partial positive charge in an atom? How it's obtained?
Explanation:
However if the two atoms have different affinities for electrons, or electronegativities, then the electrons are more likely to be found closer to the more electronegative atom. In this case, the more electronegative atom gains a partial negative charge, while the less electronegative atom becomes partially positive.
hope it helps please mark me brainlist if you are satisfied with the answer
What is the relationship between evaporation rate and molecular size of alcohols?
Answer:
larger the intermolecular forces in a compound, the slower its evaporation rate
Explanation:
socratic
A sample of neon gas occupies a volume of 414 mL at a pressure of 1.15 atm. What will be the pressure of the gas if the volume is increased to 825 mL
Answer:
.577 atm
Explanation:
P1 V1 = P2 V2
RE-ARRANGE TO P2 = P1 V1 / V2
Sub in the given values
P2 = 1.15 * .414 / .825 = .577 atm
You want to control the temperature of an enzyme-controlled reaction that is taking place inside a flask. What is the most effective way to keep the reaction at a controlled and steady temperature?
Use of thermostat is the most effective way to keep the reaction at a control temperature.
What is the most effective way to keep the reaction in control?The reaction takes place in a thermostat is the most effective way to keep the reaction at a controlled and steady temperature because thermostat regulates the temperature of that solution which is placed in it. If the temperature goes higher then the extra heat is released from the system.
So we can conclude that use of thermostat is the most effective way to keep the reaction at a control temperature.
Learn more about temperature here: https://brainly.com/question/24746268
#SPJ1
A positive correlation ______ a causal link, and a negative correlation ______ a causal link.
A. does not necessarily indicate, does not necessarily indicate
B. does not necessarily indicate, always indicates
C. always indicates, does not necessarily indicate
D. always indicates, always indicates
A positive correlation does not necessarily indicate a causal link, and a negative correlation does not necessarily indicate a causal link; option A.
What is a correlation?A correlation is a relationship that exists between two variables.
A positive correlation indicates a direct relationship while a negative correlation shows an inverse relationship.
However, a positive correlation does not necessarily indicate a causal link, and a negative correlation does not necessarily indicate a causal link.
In conclusion, a correlation indicates a relationship between two values.
Learn more about correlation at: https://brainly.com/question/4219149
#SPJ1
Write out the balanced molecular equation for the neutralization of a solution of aqueous barium hydroxide with hydrochloric acid. Be sure to include phase labels in your equation
The balanced molecular equation for this reaction is
2HCl(aq) + Ba(OH)2(aq) ===> BaCl2(aq) + 2H2O(l).
The neutralization of hydrochloric acid and barium hydroxide.
Molecular formula for hydrochloric acid is HCl and barium hydroxide is Ba(OH)2.
Hydrochloric acid and barium hydroxide is aqueous in nature.
HCl have one H+ ion and barium hydroxide has two hydroxide (OH) group.
So, it will take two HCl to neutralize one Ba(OH)2.
Hence, equation for this reaction is
2HCl(aq) + Ba(OH)2(aq) ===> BaCl2(aq) + 2H2O(l).
For detail study of balanced chemical reaction refer given link https://brainly.com/question/26694427.
#SPJ1.
Is nabro3 ionic or molecular?
NaBrO₃ (sodium bromate) is an ionic compound. It consists of a metal (sodium, Na) and a polyatomic ion (bromate, BrO₃⁻).
Ionic compounds are compounds composed of positive and negative ions held together by electrostatic forces. They are formed through the transfer of electrons between atoms, resulting in the formation of positively charged cations and negatively charged anions.
In an ionic compound, the cations are typically metal ions, while the anions are usually nonmetal ions or polyatomic ions. The transfer of electrons occurs from the metal atom(s) to the nonmetal atom(s), resulting in the formation of a crystal lattice structure.
Learn more about ionic compounds, here:
https://brainly.com/question/30420333
#SPJ6
Cream of tartar creates a white-purple flame when burned. What can you hypothesize is a component of the cream
Potassium can be a component of the cream.
Why does potassium show white-purple flame when burned?An element's presence can be determined using a flame test. The potassium in cream of tartar is what gives it its white-purple color.
Low ionization enthalpy elements allow the flame to display color. Due to low ionization enthalpy, when an element is heated, its valence electrons are quickly excited to higher orbits and emit light as they return to their original orbit. Salts of potassium emit a white-purple color when ignited. The cream of tartar's chemical formula is KC₄H₅O₆.
Learn more about flame test here:
https://brainly.com/question/22043426
#SPJ4
When the total pressure inside a tennis ball reaches 1013 kPa, the tennis ball will burst. If the ball
originally has a pressure of 405 kPa at room temperature (20°C), at what temperature will the ball burst?
(submit your work)
Answer:
50.0 °C
Explanation:
If all other variables are being held constant, you can find the temperature using Guy-Lussac's Law. The equation looks like this:
P₁ / T₁ = P₂ / T₂
In this equation, "P₁" and "T₁" represent the initial pressure and temperature. "P₂" and "T₂" represent the final pressure and temperature. You can find the missing temperature (T₂) by plugging the given values into the equation and simplifying.
P₁ = 405 pKa P₂ = 1013 pKa
T₁ = 20 °C T₂ = ? °C
P₁ / T₁ = P₂ / T₂ <----- Guy-Lussac's Law
405 pKa / 20 °C = 1013 pKa / T₂ <----- Insert values
20.25 = 1013 pKa / T₂ <----- Divide 20 from 405
20.25 x T₂ = 1013 pKa <----- Multiply both sides by T₂
T₂ = 50.0 °C <----- Divide both sides by 20.25
A ground test utilizing an auxiliary current electrode and an auxiliary potential electrode is known as the______.
Answer:
The three-point test
Explanation:
The three-point test refers to a ground test utilizing an auxiliary current electrode and an auxiliary potential electrode.
A known amount of heat is transferred to a sample of iron and the iron raises its temperature by 4.0 degrees Celsius. What would be the temperature increase if the same amount of heat was transferred to the same mass of water
To learn more about transfer of heat visit:
https://brainly.com/question/13433948
#SPJ4
How much energy will a sample of aluminum gain when it is warmed from 306 K to 419 K? The specific heat capacity of aluminum is 0.897 J/g.K,
and the mass of the sample is 5.00 g.
Answer:
506.81J
Explanation:
H = MC(T1 - T0)
H = 5 × 0.897 × (419 - 306)
H = 5 × 0.897 × 113
H = 506.81 J
As per specific heat of aluminium ,506.81 J of energy is gained by the sample.
What is specific heat capacity?Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.
It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.
It is given by the formula ,
Q=mcΔT
For the given example, Q=energy
m=mass=5 g, C=0.897 J/g.K
T₂=419 K
T₁=306 K
substituting in the formula ,Q=5×0.897(419-306)=506.81 J.
Thus, 506.81 J of energy is required.
Learn more about specific heat capacity,here:
https://brainly.com/question/1747943
#SPJ2
Entropy A. has a strong odor B. is a measure of correlation between numeric variables C. is used to calculate information gain D. is a measure of information gain
Correct option:
Entropy is used to calculate information gain.
What is entropy?
Entropy is the measure of data's uncertainty or randomness; the greater the randomness, the higher the entropy. Entropy is used by information gain to make choices. Information will increase if the entropy decreases.Decision trees and random forests leverage information gained to determine the appropriate split. Therefore, the split will be better and the entropy will lower the more information gained.Information gain is calculated by comparing the entropy of a dataset before and after a split.Entropy is a way to quantify data uncertainty. The goal is to maximize information gain while minimizing entropy. The method prioritizes the feature with the most information, which is utilized to train the model.Entropy is actually used when you use information gain.Learn more about entropy here,
https://brainly.com/question/22145368
#SPJ4
Which statement is true of the following reaction?
H₂ + O₂H+ + 0²-
O It is balanced for oxidation state and for number of atoms.
O It is not balanced for oxidation state or for number of atoms.
O It is not balanced for oxidation state but is balanced for number of atoms.
OIt is balanced for oxidation state but is not balanced for number of atoms.
Answer: the answer is not c
Explanation: I don't know the correct answer, but I took the test and I know it is not c
Answer:
b is the answer
Explanation:
bc i said so
Which type of bond is not backed by any specific collateral, such as land or equipment?
a) secured bonds
b) debenture bonds
c) equity bond
d) mortgage bonds
Answer:
A
Explanation:
looking at both equity
and mortgage bond fixtures
I would rather say secured bond fit into not being backed by any specific collateral
Which statement is always true about a reversible chemical reaction?
A.
The concentration of reactants is higher than that of the products.
B.
The products can form reactants, and the reactants can form products.
C.
The concentrations of reactants and products are not constant.
D.
The concentration of the products is higher than that of the reactants.
Answer: b
Explanation:
Which rule for assigning oxidation numbers is correct?
Hydrogen is usually –1.
Oxygen is usually –2.
A pure group 1 element is +1.
A monatomic ion is 0.
The incorrect rule for assigning oxidation numbers is Hydrogen is usually –1.
Hydrogen is usually +1
What is oxidation number?Oxidation numbers can be defined as that number which is assigned to an element in chemical reaction which represents the number of electrons lost or gained.
So therefore, the incorrect rule for assigning oxidation numbers is Hydrogen is usually –1.
Learn more about oxidation numbers:
https://brainly.com/question/27239694
#SPJ1
Answer:
B: Oxygen is usually –2.
Explanation:
5. Why is it important to incubate microbe(s) isolated from humans at 37 degrees celsius?
Despite the fact that viruses and ambient bacteria found indoors could both be mesophiles, at 37 degrees Celsius, the temperature of the human body, pathogens would develop more quickly than environmental strains.
A virus would be an infectious submicroscopic creature that only reproduces inside of live cells.
Although bacteria may survive at higher and lower temperatures than humans, they thrive in an environment which really is warm, wet, protein-rich, and pH neutral as well as slightly acidic.
Therefore, Despite the fact that viruses and ambient bacteria found indoors could both be mesophiles, at 37 degrees Celsius, the temperature of the human body, pathogens would develop more quickly than environmental strains.
To know more about viruses and bacteria
https://brainly.com/question/8008968?
#SPJ4