Ethylenediamine (en) is a bidentate ligand. What is the coordination number of cobalt in [Co(en)2Cl2]Cl

During the enrichment of refined grain products, iron is the only mineral added, whereas the selenium, zinc, copper, and other minerals lost during refinement are not replaced.

Refined grains are grains that have been stripped of their outer layers, including the bran and germ, which contain most of the grain's nutrients, leaving only the starchy endosperm.

The refining process removes a significant amount of fiber, vitamins, and minerals from the grain, making it less nutritious.

To address this, the food industry enriches refined grains by adding back some of the lost nutrients.

However, the process of enrichment is not sufficient to restore all of the lost nutrients. Iron is typically the only mineral added during enrichment because it is the most significant nutrient lost during the refining process.

The other minerals, such as zinc and selenium, are not added back because they are not as critical to the grain's nutritional value.

To get these minerals, it is best to consume whole grains, which have not undergone the refining process and still contain all of their original nutrients.

to know more about Refined grains refer here:

https://brainly.com/question/30673760#

#SPJ11

Answer:

14.58g

Explanation:

under electrolysis

sn²+ + 2e- = Sn that's 2F

m = Rmm × It /n × 96500

m = 118.7 × 5.99 × 3960/ 193000

m = 14.59g

When thermal equilibrium is reached, the final temperature of the ice-water mixture will be 0°C.

We can use the equation Q = m * c * ΔT to calculate the amount of heat exchanged between the ice and water, where Q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

First, we need to calculate the heat energy required to raise the temperature of the ice from 0°C to 0°C (i.e., to melt the ice). We know that the specific heat of fusion of ice is 334 J/g, so the heat energy required is:

Q₁ = m * Lf = 30 g * 334 J/g = 10,020 J

Next, we need to calculate the heat energy required to raise the temperature of the resulting water from 0°C to 20°C. The specific heat capacity of water is 4.184 J/g·°C, so the heat energy required is:

Q₂ = m * c * ΔT = 100 g * 4.184 J/g·°C * 20°C = 8,368 J

Since there is no heat loss to the surroundings, the heat energy gained by the water (Q₂) is equal to the heat energy lost by the ice (Q₁) when they reach thermal equilibrium. Therefore:

Q₁ = Q₂

10,020 J = 8,368 J + m₂ * c₂ * ΔT

m₂ * c₂ * ΔT = 1,652 J

Since the final temperature is 0°C, the change in temperature (ΔT) is -20°C. Substituting the values we know:

m₂ * c₂ * (-20°C) = 1,652 J

m₂ * c₂ = -82.6 J/°C

Assuming the density of water is 1 g/mL, the mass of the resulting water is:

m₂ = 100 g + 30 g = 130 g

Therefore, the specific heat capacity of the resulting water is:

c₂ = -82.6 J/°C / 130 g = -0.636 J/g·°C

The negative sign indicates that the resulting water has a lower specific heat capacity than pure water. This is because the dissolved solids in the water (such as salts and minerals) increase the density of the water, making it more difficult to heat up.

To know more about thermal equilibrium, refer here:

https://brainly.com/question/14556352#

#SPJ11

The pH after the addition of 81 mL of 0.40 M NaOH to 80.0 mL of 0.40 M HClO4 is 13.30

The balanced chemical equation for the reaction between HClO4 and NaOH is:

HClO4 + NaOH → NaClO4 + H2O

First, let's find the moles of HClO4 and NaOH present before the reaction:

moles HClO4 = 0.40 mol/L x 0.080 L = 0.032 mol

moles NaOH = 0.40 mol/L x 0.081 L = 0.0324 mol

Since the moles of NaOH added are greater than the moles of HClO4 initially present, NaOH is the limiting reagent. Therefore, all of the NaOH will react with the HClO4, and we need to find the number of moles of HClO4 that react with the NaOH.

According to the balanced equation, 1 mole of NaOH reacts with 1 mole of HClO4. Therefore, 0.0324 mol of HClO4 will react with the 0.0324 mol of NaOH.

The remaining moles of HClO4 after the reaction is given by:

moles HClO4 remaining = 0.032 mol - 0.0324 mol = -0.0004 mol

Since the resulting moles of HClO4 is negative, this means that all the HClO4 has been used up and the solution is basic. The excess NaOH reacts with water to produce hydroxide ions:

NaOH + H2O → Na+ + OH- + H2O

The total volume of the solution after the reaction is:

V = 80.0 mL + 81 mL = 0.161 L

The concentration of OH- ions produced is given by:

[OH-] = moles NaOH / V = 0.0324 mol / 0.161 L = 0.201 M

Using the expression for the ion product of water, we can calculate the concentration of H+ ions:

Kw = [H+][OH-] = 1.0 x 10^-14

[H+] = Kw / [OH-] = 1.0 x 10^-14 / 0.201 M = 4.975 x 10^-14

The pH of the solution is given by:

pH = -log[H+] = -log(4.975 x 10^-14) = 13.30

To know more about moles please visit:

https://brainly.com/question/31597231

#SPJ11

17.6 mL of 0.500 M NaI would be required to make a 0.0320 M solution of NaI when diluted to 275.0 mL with water.

Using the dilution formula:

C₁V₁ = C₂V₂

where C₁ is the initial concentration (0.500 M)

V₁ is the initial volume

C₂ is the final concentration (0.0320 M)

V₂ is the final volume (275.0 mL).

Solving for V₁:
V₁ = (C₂V₂) / C₁

Putting the values:
V₁ = (0.0320 M × 275.0 mL) / 0.500 M
V₁ = 17.6 mL

So, you would need 17.6 mL of 0.500 M NaI to make a 0.0320 M solution of NaI.

To learn more about dilution visit:

https://brainly.com/question/27097060

#SPJ11

In this conformation, the two methyl groups attached to the C-2 and C-5 carbon atoms are as far away from each other as possible, which results in the most stable conformation.

Let's start with part (b) first. A bond-line depiction of 2,2,5,5-tetramethylhexane would look like this:

```
CH3     CH3
 |       |
 C       C
/ \     / \
C   C---C   C
\ /     \ /
 C       C
 |       |
CH3     CH3
```

In this structure, each of the six carbon atoms has four methyl groups (CH3) attached to it.

Now, to draw a Newman projection of the most stable conformation sighting down the C-3 - C-4 bond, we need to visualize the molecule as if we are looking down that bond from the carbon atom labeled C-3. In the Newman projection, the carbon atom labeled C-3 will be in the front, while the carbon atom labeled C-4 will be in the back.

To determine the most stable conformation, we need to consider the steric hindrance caused by the methyl groups. The most stable conformation will be one where the methyl groups are as far away from each other as possible.

Based on this, the Newman projection of the most stable conformation sighting down the C-3 - C-4 bond would look like this:

```
    CH3
     |
     C
    / \
CH3-C   C-CH3
    \ /
     C
     |
    CH3
```

In this conformation, the two methyl groups attached to the C-2 and C-5 carbon atoms are as far away from each other as possible, which results in the most stable conformation.

To know more about conformation click here:

https://brainly.com/question/30906451

#SPJ11

Prior to 1700, the concentrations of carbon dioxide and methane in the atmosphere were relatively stable at around 280 ppm and 700 ppb, respectively.

However, due to human activities such as burning fossil fuels and deforestation, the concentrations of these gases have increased significantly since the Industrial Revolution. Currently, the concentration of carbon dioxide is around 415 ppm, and the concentration of methane is around 1,850 ppb. This rapid increase in greenhouse gas concentrations is causing climate change and its associated impacts, such as rising temperatures, sea level rise, and more frequent extreme weather events.

More on concentrations: https://brainly.com/question/21918131

#SPJ11

Sodium bicarbonate and acetic acid are commonly known as baking soda and vinegar, respectively. They are versatile substances with multiple uses in cooking and cleaning. Both are considered safe, eco-friendly alternatives to conventional cleaning products.

Baking soda, or sodium bicarbonate, is a versatile compound with various applications. In cooking, it serves as a leavening agent in recipes like cakes, cookies, and bread, helping the dough to rise.

Additionally, baking soda has a wide range of cleaning uses, such as removing stains, eliminating odors, and acting as a mild abrasive in cleaning products. It is also used as a natural deodorizer for refrigerators and other confined spaces.

Vinegar, or acetic acid, is a mild acid that is used as a culinary ingredient, mainly for its tangy flavor and as a natural preservative. It is commonly used in salad dressings, marinades, and pickling solutions.

Apart from its culinary applications, vinegar is a popular cleaning agent due to its ability to dissolve mineral deposits and cut through grease. It can also be used as a natural, non-toxic weed killer in gardens and lawns.

For more such questions on Baking soda, click on:

https://brainly.com/question/1596599

#SPJ11

The final volume of the diluted 0.245 M HCl solution is approximately 208.2 mL.

To determine the final volume of the diluted solution, we can use the equation for dilution:

M1V1 = M2V2

where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Substituting the given values, we get:

(4.05 M) (12.5 mL) = (0.245 M) (V2)

Solving for V2, we get:

V2 = (4.05 M) (12.5 mL) / (0.245 M) = 208.2 mL

Therefore, the final volume of the diluted solution is 208.2 mL.

To know more about volume click on below link :

https://brainly.com/question/27829657#

#SPJ11

596 J of energy has been lost from the system when 0.344 mL of Br₂ has been consumed.

The electrical work done can be calculated using the formula:

W = -nFE

where W is the electrical work done, n is the number of moles of electrons transferred, F is the Faraday constant (96,485 C/mol), and E is the cell potential in volts.

First, we need to calculate the number of moles of electrons transferred by the reaction. From the balanced redox reaction, we can see that 1 mole of Br₂ reacts with 2 moles of electrons:

Br2(l) + 2 e⁻ → 2 Br⁻(aq)

Therefore, the number of moles of electrons transferred is:

Now we can calculate the electrical work done:

The negative sign indicates that the electrical work done is negative, which means that the system has lost energy to the surroundings. Therefore, 596 J of energy has been lost from the system when 0.344 mL of Br₂ has been consumed.

To know more about the Electrical, here

https://brainly.com/question/16398309

#SPJ1

91.125 is the value of the equilibrium constant (Keq).  The equilibrium constant, lies to the right.

When the observable qualities, including colour, temperature, pressure, concentration, etc. do not vary, the process is said to be in equilibrium. As "balance" is the definition of the word "equilibrium," it follows therefore a chemical reaction implies a balance amongst both the reactants and the products involved in the reaction. The equilibrium condition can also be seen in several physical processes, as the melting of ice at 0 degrees Celsius.

Equilibrium constant = [Product]ᵐ / [Reactant]ⁿ

Equilibrium constant = 9.7 x 10 x3.2 × 10³ /0.25

Equilibrium constant = 91.125

We can see from the computation above, the equilibrium constant has been significantly larger than one. The equilibrium constant, then, is located to the right.

To know more about equilibrium, here:

https://brainly.com/question/30807709

#SPJ1

If the endpoint of a neutralization reaction will have a pH of 6.3, methyl orange could be used as an indicator. if the pH of the solution is closer to 6.3, the color change of methyl orange may be too subtle to detect. In this case, bromocresol green or phenol red may be more appropriate indicators.

To determine which indicator to select for a neutralization reaction with an endpoint of pH 6.3, you should consider the following terms: endpoint, neutralization reaction, and pH.

A neutralization reaction occurs when an acid and a base react to form a salt and water, resulting in a change in pH. The endpoint of a neutralization reaction is the point at which the reaction is complete, and the pH reaches a specific value. In this case, the endpoint is a pH of 6.3.

Indicators are substances used to detect the endpoint of a reaction by changing color in response to changes in pH. To select the appropriate indicator for this neutralization reaction, you would need to choose one that changes color at or near a pH of 6.3.

In this case, you could select methyl orange as the indicator. Methyl orange has a pH transition range of 3.1 to 4.4, but it is also known to work effectively in slightly more acidic conditions, like a pH of 6.3. This would make it suitable for detecting the endpoint of your neutralization reaction. Bromocresol green or phenol red may be more appropriate indicators as methyl orange may be too subtle to detect.

To know more about Indicators refer here:

https://brainly.com/question/6820241#

#SPJ11

The citric acid cycle, also known as the Krebs cycle or the tricarboxylic acid cycle, is considered to be part of aerobic metabolism because it requires oxygen indirectly.

The cycle produces reduced coenzymes, NADH and FADH₂, which donate electrons to the electron transport chain in the mitochondria, which ultimately transfers electrons to molecular oxygen, the final electron acceptor.

Without molecular oxygen, the electron transport chain cannot function, and the citric acid cycle would not be able to regenerate NAD⁺ and FAD, which are essential for the cycle to continue. Therefore, although oxygen is not a substrate in any reaction of the citric acid cycle, it is necessary for the overall process of aerobic metabolism.

To know more about the citric acid cycle refer here :

https://brainly.com/question/11459709#

#SPJ11

An acid-base indicator works by changing color as the pH of a solution changes during a titration. The choice of indicator for a particular acid-base titration depends on the pH range over which the titration occurs and the pKa of the indicator.

An acid-base indicator is a weak acid or base that undergoes a color change when it is protonated or deprotonated. For example, phenolphthalein is a commonly used indicator for acid-base titrations because it is colorless in acidic solutions and pink in basic solutions. During a titration, as the titrant (usually a strong acid or base) is added to the analyte (usually a weak acid or base), the pH of the solution changes. At a certain pH, the indicator undergoes a protonation or deprotonation reaction, causing a color change that signals the endpoint of the titration.

The choice of indicator for a particular titration depends on the pH range over which the titration occurs and the pKa of the indicator. The indicator should have a pKa value that is close to the pH of the equivalence point of the titration. The pH range over which the indicator undergoes a color change should also match the pH range over which the analyte undergoes a significant pH change. For example, methyl orange is a suitable indicator for a strong acid-strong base titration because it changes color in the pH range of the equivalence point of the titration, which is around pH 7. On the other hand, bromothymol blue is suitable for titrating weak acids against strong bases because it changes color in the pH range of the equivalence point of the titration, which is around pH 8.

learn more about bromothymol blue here:

https://brainly.com/question/30150766

#SPJ11

The creature died about 22,000 years ago.

The decay of 14C follows first-order kinetics, which means that the decay rate is proportional to the amount of 14C remaining in the sample. The half-life of 14C is 5730 years, which means that half of the initial amount of 14C will decay in 5730 years.

We can use the following equation to relate the specific activity of 14C to the amount of 14C remaining in the sample:

A = λN

where A is the specific activity (in decays per minute per gram of sample), λ is the decay constant (in years⁻¹), and N is the number of 14C atoms remaining in the sample.

We can rewrite this equation as:

N = A/λ

The specific activity of the contemporary sample is 15.3 decays/min per gram of sample, so we can use this value to determine the number of 14C atoms in the contemporary sample:

N0 = A/λ = 15.3 decays/min per gram of sample / (ln2 / 5730 years) = 1.06 x 10¹² 14C atoms per gram of carbon

Now we can use the specific activity of the sample from the skeletal remains to determine the number of 14C atoms in that sample:

Nt = A/λ = 2.48 decays/min per gram of sample / (ln2 / 5730 years) = 1.71 x 10¹¹ 14C atoms per gram of carbon

The ratio of the number of 14C atoms in the sample from the skeletal remains to the number of 14C atoms in the contemporary sample gives us the fraction of 14C remaining in the sample from the skeletal remains:

Nt/N0 = (1.71 x 10¹¹) / (1.06 x 10¹²) = 0.1615

This means that the sample from the skeletal remains has retained only 16.15% of its initial 14C content.

We can use the half-life equation to determine how many half-lives have elapsed since the creature died:

t = (ln 2 / λ) x number of half-lives

where t is the time elapsed (in years) and λ is the decay constant.

We know that the half-life of 14C is 5730 years, so the decay constant is:

λ = ln 2 / 5730 years = 1.21 x 10⁻⁴ years⁻¹

We can solve for the number of half-lives that have elapsed by rearranging the equation:

number of half-lives = (ln Nt/N0) / ln 2 = (ln 0.1615) / ln 2 = 2.74

Therefore, the creature died approximately 2.74 half-lives ago, which corresponds to a time elapsed of:

t = (ln 2 / λ) x number of half-lives = (ln 2 / 1.21 x 10⁻⁴ years⁻¹) x 2.74 = 22,000 years

So, by calculating we get that the creature died about 22,000 years ago.

To know more about the half-life refer here :

https://brainly.com/question/24710827#

#SPJ11

Short- and medium-chain fatty acids are transported to the liver in the portal vein, whereas long-chain fatty acids are circulated away from the small intestine in the lymphatic system.

The portal vein is responsible for carrying nutrient-rich blood from the small intestine to the liver. Short- and medium-chain fatty acids, which are smaller in size and more water-soluble, are absorbed by the intestinal cells and directly transported to the liver through the portal vein. On the other hand, long-chain fatty acids, which are larger and less water-soluble, are first packaged into chylomicrons by the intestinal cells and then enter the lymphatic system before reaching the bloodstream. This allows for efficient absorption and transport of different types of fatty acids to their respective destinations.

In summary, the portal vein carries short- and medium-chain fatty acids to the liver, while the lymphatic system carries long-chain fatty acids away from the small intestine.

Learn more about chylomicrons here:

https://brainly.com/question/31141345

#SPJ11

To maintain an equilibrium constant and equilibrium position, it is essential to keep the following variables constant:

1. Temperature: Changing the temperature can alter the equilibrium constant, as it affects the reaction rates and the energy distribution within the system.
2. Pressure (for gaseous reactions): Pressure affects the concentration of reactants and products, and changing it can shift the equilibrium position.
3. Concentration: The equilibrium position is determined by the concentrations of reactants and products, so maintaining constant concentrations is necessary.

By keeping these variables constant, you can ensure that the equilibrium constant and equilibrium position remain stable.

To know more about equilibrium position, visit:

https://brainly.com/question/31576470

#SPJ11

Molarity of the solution formed by dissolving 97.7 grams LiBr in enough water to yield 750 mL of solution is 1.50 M.

To find the molarity of the solution, we need to first determine the moles of LiBr and then divide it by the volume of the solution in liters.

Molarity (M) = moles of solute / volume of solution in liters

1. Calculate the moles of LiBr:
LiBr has a molar mass of 86.84 g/mol (6.94 g/mol for Li and 79.9 g/mol for Br).
moles of LiBr = (97.7 g) / (86.84 g/mol) = 1.125 moles

2. Convert the volume of the solution to liters:
750 mL = 750 / 1000 = 0.750 L

Now, we can calculate the molarity by dividing the moles of LiBr by the volume of the solution in liters:
M = (1.125 moles) / (0.750 L) = 1.50 M

The molarity of the LiBr solution is 1.50 M.

To know more about Molarity, visit:

https://brainly.com/question/8732513

#SPJ11

Under normal conditions, the oxygen-carrying capacity of hemoglobin is about 12-17g/dL.

The normal range for hemoglobin concentration in adults varies slightly between men and women. In adult men, the normal range is typically between 13.5 and 17.5 g/dL, while in adult women, it is typically between 12.0 and 15.5 g/dL. For the purpose of this answer, I used the broader range of 12-17 g/dL, which encompasses both men and women.

Hemoglobin is responsible for binding to oxygen molecules in the lungs and carrying them to tissues throughout the body. Each gram of hemoglobin can carry approximately 1.34 milliliters (mL) of oxygen. Therefore, to calculate the oxygen-carrying capacity of hemoglobin, we multiply the hemoglobin concentration by the oxygen-carrying capacity per gram of hemoglobin.

Let's consider the range of 12-17 g/dL for hemoglobin concentration. If we take the lower end of the range, 12 g/dL, and multiply it by the oxygen-carrying capacity per gram of hemoglobin (1.34 mL), we get:

12 g/dL * 1.34 mL/g ≈ 16.08 mL/dL

Similarly, if we take the upper end of the range, 17 g/dL, and perform the same calculation, we get:

17 g/dL * 1.34 mL/g ≈ 22.78 mL/dL

Therefore, under normal conditions, the oxygen-carrying capacity of hemoglobin can range from approximately 16.08 mL/dL to 22.78 mL/dL, depending on the hemoglobin concentration within the normal range of 12-17 g/dL.

Learn more about hemoglobin at:

https://brainly.com/question/24172325

#SPJ11

Answer:

In Mendeleev's table, each period contains eight elements, and then the pattern repeats in the next row

Explanation:

this should be it

When cyclopentanecarboxylic acid is treated with SOCl2, the major product formed is cyclopentanecarbonyl chloride (C5H9COCl). This is due to the reaction between SOCl2 and the carboxylic acid group to form an acyl chloride.

The reaction mechanism involves the replacement of the hydroxyl group of the carboxylic acid by a chlorine atom, forming HCl as a byproduct.
When cyclopentanecarboxylic acid is treated with excess LAH, followed by H2O, the major product formed is cyclopentanemethanol (C5H10O). LAH reduces the carboxylic acid group to an alcohol group by adding a hydride ion. The alcohol group is then converted to a hydroxyl group by adding H2O in the second step.
When cyclopentanecarboxylic acid is treated with NaOH, the major product formed is sodium cyclopentanecarboxylate (C5H9COO-Na+). This reaction involves the deprotonation of the carboxylic acid group by NaOH to form the carboxylate ion. The counterion in this case is Na+.
When cyclopentanecarboxylic acid is treated with [H+], EtOH, the major product formed is ethyl cyclopentanecarboxylate (C8H14O2). This reaction involves the esterification of the carboxylic acid group with ethanol, catalyzed by the proton (H+) to form the ester product. The reaction mechanism involves the protonation of the carboxylic acid, followed by the attack of the ethoxy group of ethanol, and the removal of water as a leaving group.

learn more about cyclopentanecarboxylic acid here

https://brainly.com/question/31324872

#SPJ11

The vapor pressure of the aqueous solution that is containing 14% (by weight) ethylene glycol is 22.72 torr.

Consider the 100 g solution.

The Ethylene glycol mass = 14 g

The water mass = 100 g - 14 g

The water mass = 86 g moles.

The moles of Ethylene glycol = 14 / 62

The moles of Ethylene glycol = 0.225 moles.

The moles of water = 86 / 18 g = 4.77 moles

Total moles = 0.225 + 4.77

Total moles = 4.99 moles

The mole fraction of the water = 4.77 moles / 4.99 moles  

The mole fraction of the water = 0.955

The Vapor pressure = mole fraction of water ×   water vapor pressure The Vapor pressure =  (0.955)(23.8 torr)

The Vapor pressure = 22.72 torr.

To learn more about vapor pressure here

https://brainly.com/question/11864750

#SPJ1

The enthalpy change for the dissolution of KBr in water is -71.56 kJ/mol.

To calculate the enthalpy change for the dissolution of KBr in water, we can use the following formula:

ΔH = -q / n

where ΔH is the enthalpy change, q is the heat absorbed or released by the reaction, and n is the number of moles of KBr dissolved.

First, let's calculate the heat absorbed or released by the reaction using the following formula:

q = m × c × ΔT

where q is the heat, m is the mass of the solution, c is the specific heat capacity of water (4.184 J/g·°C), and ΔT is the temperature change.

m = 11.4 g KBr + 100.0 g water = 111.4 g

ΔT = 24.88°C - 20.34°C = 4.54°C

q = 111.4 g × 4.184 J/g·°C × (-4.54°C) = -20891 J

The negative sign indicates that the reaction releases heat to the surroundings.

Next, let's calculate the number of moles of KBr dissolved:

n = mass / molar mass

molar mass of KBr = 39.10 g/mol (from periodic table)

n = 11.4 g / 39.10 g/mol = 0.2918 mol

Finally, we can calculate the enthalpy change:

ΔH = -q / n = -(-20891 J) / 0.2918 mol = 71560 J/mol

To convert J/mol to kJ/mol, we divide by 1000:

ΔH = 71.56 kJ/mol

Therefore, the enthalpy change for the dissolution of KBr in water is -71.56 kJ/mol.

Learn more about the dissolution

https://brainly.com/question/23851972

#SPJ4

The redox reaction will occurs spontaneously as the electrode potential of the cell is positive.

The equation of the redox reaction is as :

3Zn²⁺(aq)  +  2Cr(s)  ---->   3Zn(s)  +  2Cr³⁺(aq)

At cathode : 3Zn²⁺  +  6e⁻ --->  3Zn

At anode : 2Cr  --->  2Cr³⁺  + 6e⁻

The standard potential of the cell is as :

E° cathode = - 0.74 V

E° anode = - 0.76 V

The E° cell is as :

E° cell = E° cathode - E° anode

E° cell = - 0.74 V - ( - 0.76 )

E° cell = 0.02 V

The E° cell is the positive, therefore the redox reaction occurs spontaneously.

To learn more about redox reaction here

https://brainly.com/question/28300253

#SPJ1

The value of the quantum number n for the excited state is 3. In physics, wavelength is an important parameter of many types of waves, including electromagnetic waves such as light and radio waves, as well as sound waves and water waves.

What is Wavelength?

Wavelength is the distance between successive peaks or troughs of a wave. It is usually denoted by the Greek letter lambda (λ) and is commonly measured in meters (m) or nanometers (nm).

We can then use the equation ΔE = hf to find the energy released by the electron as it drops from the excited state to the ground state. The energy difference between the excited state and the ground state can be expressed as ΔE = -13.6 eV (1/[tex]nf^{2}[/tex] - 1/[tex]ni^{2}[/tex]), where nf is the quantum number of the final state (which is 1 for the ground state) and ni is the quantum number of the initial state (which is what we are trying to find).

We know that the energy released by the electron is equal to the energy difference between the excited state and the ground state, so we can set ΔE = hf and solve for ni:

ΔE = hf = -13.6 eV (1/[tex]1^{2}[/tex] - 1/[tex]ni^{2}[/tex])

ni = sqrt(1/(-13.6 eV/ hf + 1))

Plugging in the values we have calculated, we get:

ni = sqrt(1/(-13.6 eV/ (6.63 × [tex]10^{-34}[/tex] J·s × 3.09 × [tex]10^{15}[/tex]Hz) + 1)) = 3

To know more about Wavelength, visit;

https://brainly.com/question/10750459

#SPJ4

The electron configuration of a ground-state Ag (silver) atom is [Kr]5s24d9. This means that there are 47 electrons in total in the atom, with the first 18 (up to the noble gas krypton) being filled in the 1s, 2s, 2p, 3s, 3p, 3d, 4s, 4p, and 4d orbitals.

The remaining 29 electrons fill the 5s and 4d orbitals, with the 5s orbital being filled first before moving to the 4d orbital. The configuration can be abbreviated as [Kr]4d105s1, indicating that the last electron enters the 5s orbital. This electron configuration explains why silver is able to form ions with a charge of +1, as it can easily lose its single 5s electron to form a stable cation.

We can determine its electron configuration by following the Aufbau principle, which states that electrons fill the lowest energy levels first.

Starting from the lowest energy level, we have:
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s¹, 4d¹⁰

As you can see, the configuration is [Kr]5s1 4d10, where [Kr] represents the electron configuration of the noble gas krypton, which precedes silver on the periodic table.

To know more about electron visit:

https://brainly.com/question/1255220

#SPJ11

The released activity decays to 1.5e6 Ci in 2022.

Cs-137 has a half-life of 30 years, which means that every 30 years, the activity of the substance reduces to half of its previous value. Therefore, we need to calculate the number of half-lives that have passed between 1986 and 2022:

2022 - 1986 = 36 years

Number of half-lives = 36 years ÷ 30 years/half-life

Number of half-lives = 1.2 half-lives

This means that the activity of Cs-137 has reduced to [tex]\frac{1}{2}^{(1.2)[/tex] = 0.426 of its original value. To find the released activity in 2022, we can multiply this factor by the original activity:

Released activity in 2022 = 6e6 Ci × 0.426

Released activity in 2022 = 1.5e6 Ci

Therefore, the released activity of Cs-137 from Chernobyl decays to 1.5e6 Ci in 2022.

To know more about released activity, refer here:

https://brainly.com/question/30456434#

#SPJ11

Answer:

The property of water that is described as its ability to act as a universal solvent due to its polar nature and ability to attract other molecules is called "solvent power" or "solubility."

The enthalpy of the reaction, as written, is -238950 J/mol Na. The reaction between sodium metal and hydrochloric acid is an exothermic reaction,

Meaning that heat is released during the reaction. In this case, when 0.744 g of sodium metal is added to an excess of hydrochloric acid, 7730 J of heat are produced.

The balanced chemical equation for this reaction is: 2 Na (s) + 2 HCl (aq) → 2 NaCl (aq) + H2 (g), From this equation, we can see that 2 moles of sodium react with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas and 2 moles of sodium chloride.

To find the enthalpy of the reaction, we need to calculate the amount of heat released per mole of sodium reacted. To do this, we first need to convert the mass of sodium reacted to moles.

The molar mass of sodium is 22.99 g/mol, so the number of moles of sodium reacted is: 0.744 g Na ÷ 22.99 g/mol Na = 0.0324 mol Na,

Next, we need to calculate the amount of heat released per mole of sodium reacted. To do this, we divide the total heat released (7730 J) by the number of moles of sodium reacted: 7730 J ÷ 0.0324 mol Na = -238950 J/mol Na .

The negative sign indicates that the reaction is exothermic (heat is released). So the enthalpy of the reaction, as written, is -238950 J/mol Na.

Overall, this calculation tells us that the reaction between sodium and hydrochloric acid is highly exothermic, meaning that a significant amount of heat is released during the reaction.

To know more about sodium click here

brainly.com/question/5419833

#SPJ11

The concentration of the sodium persulfate solution is 0.129 M.

The balanced equation for the reaction between sodium persulfate and potassium iodide is:

Na₂S₂O₈ + 2KI → 2NaI + K₂S₂O₈

According to the above reaction, 1 mole of sodium persulfate reacts with 2 moles of potassium iodide.

Thus, the number of moles of sodium persulfate used can be calculated as:

moles of Na₂S₂O₈ = moles of KI / 2

moles of KI = concentration of KI x volume of KI

moles of KI = 0.1500 M x 0.02500 L = 0.00375 moles

moles of Na2S2O8 = 0.00375 moles / 2

= 0.001875 moles

The volume of sodium persulfate used can be calculated as the difference between the final and initial buret readings:

Volume of Na₂S₂O₈= final buret reading - initial buret reading

Volume of Na₂S₂O₈ = 15.78 mL - 1.25 mL

= 14.53 mL

Conversion of volume to liters from mL:

Volume of Na₂S₂O₈ = 14.53 mL / 1000 mL/L

= 0.01453 L

The concentration of sodium persulfate can be calculated as shown below.

concentration of Na₂S₂O₈= moles of Na₂S₂O₈ / volume of Na₂S₂O₈

concentration of Na₂S₂O₈= 0.001875 moles / 0.01453 L

= 0.129 M

Therefore, the concentration of the sodium persulfate solution is 0.129 M.

To learn more about concentration:

https://brainly.com/question/23986927

#SPJ4