According to the given statement a) 39.367kJ heat is required AND b) 62.3kJ heat is required.
What are a molar mass and a mole?One mole of a chemical is equal to 6.022 x 1023 particles (or formula units) (ionic compound). The molar mass of a reagent is the amount of 1 mole of that chemical. In put it another way, it gives you the amount of grams per molecule of a material.
Heat required to convert 42.0 g of ethanol at 35 °C to the vapor phase at 78 °C can be calculated by;
H = mcθ + mL
m = mass of ethanol
c = specific heat capacity of ethanol
θ = temperature change
L = Latent heat of vaporization of ethanol
Adding values;
H = (42 × 2.3 × (78 - 35)) + (42/46 × 38.56 × 10^3)
H = 4154 + 35207
H = 39.367 kJ
b) Heat required to convert the same amount of ethanol at - 155°C to the vapor phase at 78 °C;
H = mLfus + mcθ + mLvap
H = (42/46 × 5.02 × 10^3) + (42 × 2.3 × 78 - (- 155)) + (42/46 × 38.56 × 10^3)
H = 4583 + 22508 + 35207
H = 62.3 kJ
To know more about Molar mass visit:
https://brainly.com/question/12127540
#SPJ4
A chemist titrates 110.0mL of a 0.2108M methylamine CH3NH2 solution with 0.4152M HCl solution at 25°C. Calculate the pH at equivalence. The pKb
of methylamine is 3.36Round your answer to 2 decimal places.Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of HCl solution added
At equivalence, the number of moles of methylamine and HCl are equal, and the pH of the solution is 4.76.
At equivalence, the number of moles of methylamine and HCl are equal, so we can use the equation:
n(CH3NH2) = n(HCl)
0.2108M * 110.0mL = 0.4152M * V
V = 52.4mL
Total volume of the solution: 110.0mL + 52.4mL = 162.4mL
We can use the Henderson-Hasselbalch equation to calculate the pH at equivalence:
pH = pKb + log([CH3NH2]/[HCl])
pH = 3.36 + log(0.2108M/(0.2108M + 0.4152M))
pH = 3.36 + log(0.2108M/(0.6259M))
pH = 3.36 + log(0.3389)
pH = 3.36 + (-0.4719)
pH = 4.76
For more questions like Solution pH click the link below:
https://brainly.com/question/491373
#SPJ4
Look at the general chemical equation below. A B C Which situation best describes the effect of a limiting reactant
The situation that best describes the effect of a limiting reactant is that when there is not enough A reactant to react with whole B.
The limiting reactant, also known as the limiting reagent, is the reactant that is used first during a chemical reaction, hence restricting the amount of product that can be produced. The limiting reactant can be identified in a variety of methods ,but they all require employing mole ratios from the balanced chemical equation.
The theoretical yield is the maximum quantity of product possible given the limiting reactant. The quantity of product actually procured, or actual yield, is usually always less than the theoretical yield. The percentage yield used to describe the actual yield indicates what portion of the theoretical yield was attained.
In the equation there is only one situation which describes the effect of limiting reagent when there is not enough of A to react with whole B.
Learn more about limiting reactant
brainly.com/question/2948214
#SPJ4
Part A
Determine the value of Kp for the following reaction:
4HCl(g)+O2(g)⇌2Cl2(g)+2H2O(g)
Express the equilibrium constant to three significant digits.
To determine the value of Kp for a reaction, we need to know the concentrations of all the reactants and products at equilibrium.
In this case, we are not given the equilibrium concentrations, so we cannot directly calculate Kp. Instead, we can use the ideal gas law to relate the equilibrium concentrations to the partial pressures of the gases, and use those partial pressures to calculate Kp.The equation for the ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. If we assume that the reaction occurs at a constant volume and a constant temperature, we can use the ideal gas law to relate the equilibrium partial pressures of the gases to the concentrations of the gases.Given that we have no information about the equilibrium concentrations or partial pressures, we can not calculate Kp.
To learn more about equilibrium constant here:
https://brainly.com/question/10038290
#SPJ4
10. A body is found at 2:00 pm on New Year's Eve. The temperature of the liver registers 75. 5° F. What is the approximate TOD of the victim?
The estimated time of death is approximately 10:30 pm the night before.
Estimating the time of death (TOD) can be a complex process, and the methods used will depend on the specific circumstances of the case. Some of the factors that may be taken into consideration include:
The stage of decomposition of the body: As a body decomposes, it will go through several distinct stages, each of which can provide information about the TOD.The temperature of the body: As a body cools after death, the temperature will drop at a predictable rate. By measuring the temperature of the body at different points in time, it may be possible to estimate the TOD.The body's position: The position of the body can provide clues about the time that has passed since death. For example, if a body is found lying on its back, it may indicate that it has been dead for a longer period of time than if it is found on its stomach.The presence of insects or animals: Certain insects and animals are attracted to dead bodies at different stages of decomposition. By examining the presence of these insects or animals, it may be possible to estimate the TOD.Scene examination: The scene examination and any possible evidence collected can give a rough estimate of the time of death.It is important to note that estimating the TOD is not an exact science and there are often significant margins of error. A professional forensic examination is typically needed to determine the TOD.
Learn more about TOD here:
https://brainly.com/question/29329824
#SPJ4
Help me please I have been stuck for some time
Answer:275.4 g Al2O3
Explanation: The mass of Al2O3 formed is 2.7 mol * 102 g/mol = 275.4 g. This is because the molar mass of Al2O3 is 102 g/mol. This means that when 1 mol of Al2O3 is formed, it has a mass of 102 g. Therefore, when 2.7 mol of Al2O3 is formed, it has a mass of 2.7 mol * 102 g/mol = 275.4 g.
P4 +502 — P4010
What is the limiting reactant if you are using 25. 0 grams of phosphorus and 50. 0 grams of oxygen?
A. ) O2
B. ) P4
C. ) P4O10
D. ) P4O2
The limiting reactant is O2.
To determine the limiting reactant, we need to compare the number of moles of each reactant present.
First, we convert the given masses of phosphorus and oxygen to moles:
25.0 g of P4 = 25.0 g / (123.8 g/mol) = 0.202 mol
50.0 g of O2 = 50.0 g / (32.00 g/mol) = 1.5625 mol
Next, we use the balanced equation for the reaction to determine the stoichiometry of each reactant:
P4 + 5O2 → P4O10
From the equation, we can see that for every one mole of P4, 5 moles of O2 are required.
We can then compare the number of moles of each reactant present:
0.202 mol P4 / 1 mol P4 = 0.202
1.5625 mol O2 / 5 mol O2 = 0.3125
We can see that the number of moles of O2 is less than the number of moles of P4 required by the reaction, so the limiting reactant is O2.
Learn more about Limiting Reactants here: https://brainly.com/question/14225536
#SPJ4
A gas has a pressure of 120 kPa, a temperature of 400 K and a volume of 50.0 mL. What volume will the gas have at a pressure of 60 kPa and a temperature of 200 K
The gas will have a volume of 25.0 mL at a pressures of 60 kPa or a temperature of 200 K.
What is temperature?The average kinetic potential of the particle in a system is measured by temperature. Temperature is measured using thermometers, which measure the temperature of a system by taking a reading of the system's average kinetic energy. Temperature is measured in degrees, with higher temperatures indicating a higher average kinetic energy. Temperature can be affected by a variety of factors, including the amount of energy added to or removed from a system, the number of particles present in the system, and the type of particles present in the system.
To learn more about temperature
https://brainly.com/question/2339046
#SPJ4
What could occur if the feedback loop of the knee je rk reflex was cut off at any points along its path?
If the feedback loop of the knee reflex was cut off at any points along its path, then there will be no response of knee reflex.
What does it mean if you don't have a knee reflex?Its results in harm to any part of your reflex arc, which can be due to a basic knee-medicinal condition. Healthcare suppliers can disclose hyporeflexia by spouting your knee with a rubber hammer.
If your doctor taps on a band and there isn't a reflexive movement in the muscle, it's a sign of knee-health matter. Usually, absent reflexes are created by an issue with the nerves in the tendon and muscle. You may have other muscle symptoms along with areflexia, like weakness, or atrophy.
So we can conclude that A decline reflex reply can be related to peripheral knee-nervous system disorders.
Learn more about reflex here: https://brainly.com/question/17261833
#SPJ1
5. Calculate the heat energy required, in joules, to melt 5.00 x 10² grams of ice at 0.0°C.
Here is the Conclusion 240. Heat energy affects a substance’s intermolecular forces as the substance changes between states.
How to get the State changes?Heat energy increases during the following state changes
Solid - (melting)
Liquid -gas (evaporation)
Solid- gas (sublimation)
Heat energy decreases during the following state changes
Gas- liquid (condensation)
Liquid → solid (freezing)
Gas –solid (deposition)
An intermolecular force (IMF) (or secondary force) is the force that mediates the interaction of molecules, including electromagnetic forces of attraction or repulsion that act between atoms and other types of nearby particles, such as atoms or ions.
To learn more about intermolecular to refer:
https://brainly.com/question/9328418
#SPJ1
The heat energy required, in joules, to melt 5.00 x 10² grams of ice at 0.0°C. 2016.6 J.
How does heat energy become created?When the temperature rises, molecules and atoms move faster and collide, creating heat generated (also known as heat energy). Thermal energy is the heat that results from heated substance's temperatures.
Calculation :The following phrase may be used to determine the change in heat energy in a process like melting.
S = H * m / T
where:
S = entropy [kJ]
H = fusion heat = 3.36*10¹ [J/kg]
m = mass = 0.02 [kg]
T = temperature in kelvin = 273 [K]
S = 0.02 * 5.00 * 10² / (273 + 0)
S = 2016.6 J
To know more about Heat energy visit:
https://brainly.com/question/25384702
#SPJ1
The complete question is -
Calculate the heat energy of 5.00 * 10² g of ice when it melts at 0.0°C. The heat of fusion of ice is 3.36 x 10'J/kg.
The reaction between NO(g) and O2(g) produces a single product. The reaction occurs in a rigid reaction vessel represented in the diagram above. Which of the following statements correctly predicts the change in average molecular velocity of the molecules as the reaction goes to completion at constant temperature and provides the correct explanation
The average molecular velocity of the molecules will decrease as the reaction goes to completion at a constant temperature.
What is Molecular velocity?
Molecular velocity is the average speed of molecules in a sample of matter. It is determined by the temperature of the sample, with higher temperatures resulting in higher molecular velocities.
This is because the reaction produces a single product, meaning that the number of molecules in the reaction vessel is decreasing as the reaction goes to completion. As the number of molecules decreases, the average molecular velocity of the molecules decreases as well.
To know more about molecular velocity,
https://brainly.com/question/17031383
#SPJ4
A
Choose the correct symbol to
compare these numbers.
-4 [?] 0.589
A. <
B. >
C. =
Hello there!
Answer:
A. <
Explanation:
You should remember that all negative numbers are smaller then positive numbers. For example, -10 < 7 or -9479 < 1
-4 is a negative integer
0.598 is a positive number
So -4 < 0.598 (negative < positive)
A chemist determined by measurements that moles of silver participated in a chemical reaction. Calculate the mass of silver that participated in the chemical reaction.
A chemist determined that moles of silver participated in a chemical reaction using measurements. The mass of silver involved in the chemical reaction is 1.08 grams.
Moles of silver participated = 0.01
Molar mass of silver = 108 gram/mole
Weight of silver participated= mole* molar mass
= 0.01*108 gram
= 1.08 gram
A chemist (from the Greek chm(a) alchemy; replacing chymist from Medieval Latin alchemist) is a scientist who studies chemistry. Chemists investigate the structure and properties of matter. Chemists meticulously describe the properties of molecules and their constituent atoms in terms of quantities. Chemists carefully measure the proportions of substances, the rates of chemical reactions, and other chemical properties. Pharmacists are commonly referred to as chemists in Commonwealth English.
Chemists apply their knowledge to learn the composition and properties of new substances, as well as to reproduce and synthesize large quantities of useful naturally occurring substances and to create new artificial substances and processes.
Learn more about chemist here:
https://brainly.com/question/30007736
#SPJ4
For an arbitrary worm of length L, radius R, and density d, write an equation (using the symbols A and/or B rather than the numbers) that expresses the number of moles of oxygen the worm absorbs per hour and the number of moles the worm uses per hour. How can you tell whether the worm takes in oxygen at a rate fast enough to survive
The number of moles of oxygen a worm absorbs per hour can be calculated using the formula:
A = (LR^2dO2) / (MT)
Where A is the molar flow rate of oxygen, L is the length of the worm, R is the radius of the worm, d is the density of the worm, O2 is the concentration of oxygen in the environment, M is the molar mass of oxygen, and T is the time in hours.
The number of moles of oxygen the worm uses per hour can be calculated using the formula:
B = (k*A)
Where B is the molar flow rate of oxygen used by the worm and k is the rate constant for oxygen consumption.
To determine whether the worm is taking in oxygen at a rate fast enough to survive, we would need to compare the rate of oxygen absorption (A) to the rate of oxygen consumption (B). If A > B, then the worm is absorbing oxygen at a rate that is greater than or equal to the rate at which it is consuming oxygen, and it should be able to survive. If A < B, then the worm is not absorbing oxygen fast enough to sustain its metabolism and it may not survive.
To know more about oxygen rate consumption visit :
https://brainly.com/question/13191693?referrer=searchResults
#SPJ4
4. Markeith found several fossils and decided to use Carbon-14,
which has a half-life of 5,730 years, to measure the age. How old is
each rock? Please help
b. A fossil that has 6. 25 % of its carbon atoms still
unstable?
C. A fossil that has 75% of its atoms STABLE?
A fossil that has 6.25% of its carbon atoms is still unstable.
Carbon-14 dating is a method of determining the age of organic material. Measures the amount of carbon-14 (a radioactive isotope of carbon) present in the sample. The half-life of carbon-14 is 5,730 years. This means that after 5,730 years, half of the carbon-14 atoms in the sample have decayed to nitrogen.
If 6.25% of the fossil carbon atoms are unstable, this means that 93.75% of the carbon-14 atoms in the sample have already decayed. To determine the age of a fossil, the following formula can be used:
Age = (half-life x ln(1-(fraction of decayed carbon-14/100))) / ln(2)
Age = ( 5,730 x ln(1 - (93.75/100))) / ln(2)
age = 11,460 years old
c. A fossil in which 75% of the atoms are STABLE.
If 75% of the fossil atoms are STABLE, this means that 25% of the carbon-14 atoms in the sample have decayed. The same formula as above can be used to determine the fossil age. 75 )) / ln(2)
Age = 23,120 years
Please note that these are approximate values, as the actual age of the fossils may be affected by various factors such as contamination, preservation, and measurement error.
Learn more about Radiocarbon dating and Archaeology here: https://brainly.com/question/20847687
#SPJ4
A semen sample is received in the laboratory for evaluation of fertility. No sperm are observed upon initial microscopic examination of the sample. How should you proceed
Laboratories are used in many different fields, including medicine, chemistry, biology, physics, engineering, and more.
What is laboratory?A laboratory is a facility where scientists conduct research and experiments. It is equipped with specialized equipment, tools, and supplies required for the specific purpose of conducting scientific tests, experiments, and analysis.
The next step would be to look for other seminal components, such as white blood cells, red blood cells, epithelial cells, and other organic and inorganic components. If no sperm are present, then a detailed analysis of the sample is necessary to determine the cause of the absence of sperm. Possible causes of azoospermia, or the absence of sperm, include hormonal imbalance, anatomical defects, genetic conditions, and medical treatments.
To learn more about laboratory
https://brainly.com/question/10714321
#SPJ4
Order each of the sets of compounds with respect to Sy2 reactivity (1 = fastest). A. CI B. H2C=CHCH2CI C. CI
Compound A Compound B
The order of Sy2 reactivity for the sets of compounds you provided would be:
Compound B (H2C=CHCH2CI)
Compound C (CI)
Compound A (CI)
This is because Compound B has the greatest electron-donating ability due to the presence of the alkyl group attached to the carbon bearing the halogen, making it the most nucleophilic and therefore the most reactive in an Sy2 reaction. Compound C is less reactive than B because it lacks the electron-donating alkyl group, and Compound A is the least reactive due to the lack of electron-donating groups.The term "Sy2 reactivity" refers to the reactivity of a compound in a nucleophilic substitution reaction where the leaving group is displaced by a nucleophile. The abbreviation "Sy" stands for "substitution" and the subscript "2" indicates that the reaction is bimolecular, meaning that the rate of the reaction is dependent on the concentrations of both the substrate and the nucleophile.
To learn more about sets of compounds here:
https://brainly.com/question/14117795
#SPJ4
A 2.317 gram sample of an oxide of iron was found to contain 1.677 grams of iron and 0.640 grams of oxygen. What is the simplest formula for this compound?
The simplest formula for a compound is made up of 1.677 grams of iron and 0.640 grams of oxygen would be FeO.
Empirical formulaWhat the question is asking here is the empirical formula of an oxide of iron made up of 1.677 grams of iron and 0.640 grams of oxygen. The empirical formula shows the formula in the simplest whole-number ratio of the atoms.
Iron (Fe) = 1.677 grams
Oxygen (O) = 0.640 grams
Converting the masses to moles:
Fe = 1.677/56 = 0.0299 mol
O = 0.640/16 = 0.0400 mol
Now, let's divide by the smallest mole:
Fe = 0.0299/0.0299 = 1.0
O = 0.0400/0.0299 = 1.3
Thus, the empirical formula of the oxide of iron is FeO.
More on empirical formulas can be found here: https://brainly.com/question/14044066
How does the volume change if 50mL of a gas material is cooled from 30\deg C to 5\deg C ?
50mL
46mL
100mL
56mL
The final volume can be determined using Charles's law. The volume of gas at 5 degree Celsius will be 8.3 ml.
What is Charles's law of gases ?According to Charles's law, at constant pressure, the volume of a gas is directly proportional to the temperature.
Hence, V/T = constant.
Let, V1 and T1 be the initial volume and temperature and V2, T2 be the final quantities.
then, V1/T1 = V2/T2.
V2 = V1 T2/ T1
Given, V1 = 50 ml
T1 = 30 °C
T2 = 5 °C
Then, V2 = 50 ml × 5 °C /30 °C = 8.3 ml
Therefore, the volume of the gas reduces to 8.3 ml.
Find more on Charles's law:
https://brainly.com/question/16927784
#SPJ1
The freezing of methane is an exothermic change. What best describes the temperature conditions that are likely to make this a spontaneous change
The correct answer is option C: Low temperature only, because entropy decreases during freezing.
When a substance changes from a gas to a solid, the entropy (measure of disorder) of the system decreases. This is because the solid has a more ordered structure than the gas. The decrease in entropy is accompanied by a decrease in temperature and an increase in enthalpy (heat content).For a process to be spontaneous, the entropy change must be positive, so the freezing of methane is spontaneous only if the temperature of the surroundings is lower than the temperature of the methane. Thus, the heat released from the exothermic process will be absorbed by the surroundings, the temperature of the methane will decrease, and the entropy of the system increases, driving the process towards completion.
Learn more about entropy here:
https://brainly.com/question/15025401
#SPJ4
The complete question is :
Methane freezing is an exothermic process. Which of the following best describes the temperature conditions that are most likely to cause this spontaneous change? Because entropy increases during freezing, any temperature. Because entropy decreases during freezing, any temperature. Only at low temperatures because entropy decreases during freezing. Only at high temperatures, as entropy
What is the net charge on the following peptide at pH = 0?
Peptide sequence: DSVK
a. net charge = +2
b. net charge = +1
c. net charge = 0
d. net charge = -2
The net charge on the Peptide sequence: DSVK at pH = 0 is : a. net charge = +2.
What is peptide sequence?The process of identifying the amino acids that make up a peptide chain's structural sequence is known as peptide sequencing. This knowledge must be made public in order to understand the structure and function of a protein within a cell, which is useful for biomedical research applications.
By convention, the names of peptides are always written from left to right, beginning with the N-terminal end. For example, the name glycyl-histidine-phenylalanine refers to a peptide that comprises glycine at the N-terminus, followed by a histidine, and then phenylalanine at the C-terminus.
To know more about peptide sequencing , refer
https://brainly.com/question/14775253
#SPJ4
CAN SOMEONE OR SOMEBODY HELP ME ASAP
Answer: ahem...
Explanation: 1. True 2. reproducing 3. All of them 4. i would say true, the only thing is plants dont really digest food and it says "all" organisms... 5. B, C, and D...A is more of defense and not really "maintaining structure"
Express the composition of each compound as the
mass percent of its elements (percent composition).
a.
sucrose (C,H),0.,)
c. magnetite (Fe,O.)
b.
aluminum sulfate
(Al, (SO,).)
The composition of each compound as the mass percent of its elements is as follows:
For Sucrose - Carbon is 42.18%, Hydrogen is 6.44% and Oxygen is 51.38%.For Aluminum sulfate - Aluminum is 3.99%, Sulfur is 4.57% and Oxygen is 87.44%.For Magnetite - Iron is 71.83% and Oxygen is 28.17%.What is mass percent?Concentration is expressed as mass percent. Additionally, the ingredients in a particular mixture are described. Solution composition can be understood in terms of mass percent. It indicates the mass of solute present in a solution of a given mass. The amount of solute is expressed in mass or moles.
Mass Percent = (Component Mass ÷ Total Mass) x 100% or
(mass of solute ÷ mass of solution) x 100%
a. Sucrose (C₁₂H₂₂O₁₁) with molecular mass of 342.296 u composed of:
Carbon: (12 x 12.01) / 342.296 = 42.18%
Hydrogen: (22 x 1.01) / 342.296 = 6.44%
Oxygen: (11 x 16) / 342.296 = 51.38%
b. Aluminum sulfate (Al₂(SO₄)₃) with molecular mass of 342.14 u is composed of:
Aluminum: (2 x 26.98) / 342.14 = 3.99%
Sulfur: (3 x 32.06) / 342.14 = 4.57%
Oxygen: (18 x 16) / 342.14 = 87.44%
c. Magnetite (Fe₃O₄) with molecular mass of 231.534 u is composed of:
Iron: (3 x 55.85) / 231.534 = 71.83%
Oxygen: (4 x 16) / 231.534 = 28.17%
To know more about mass percent, visit:
https://brainly.com/question/5840377
#SPJ1
Paper chromatography is a process used to separate mixtures of substances into their components. The components are carried by a mobile phase through a stationary phase made of absorbent paper. An investigation analyzed a sample of black ink to determine its components.Which property allows the components to separate
Because of its simplicity, comparatively low cost, great sensitivity, and rapid separation, TLC is an extensively used analytical method.
Using a thin stationary phase supported by an inert backing, thin layer chromatography (TLC) is a chromatographic technique used to separate the components of a mixture. It can be carried out on an analytical scale to track the development of a reaction or on a preparative scale to purify minute quantities of a chemical. Similar to all chromatography, TLC works on the premise that a chemical will have varying affinities for the mobile and stationary phases, which will influence how quickly it migrates. TLC aims to produce well-defined, well-separated spots.
Learn more about reaction here-
https://brainly.com/question/28984750
#SPJ4
How many moles of H3PO4 form from 9 mol P4O10
According to the given chemical equation and stoichiometry of it , 36 moles of H₃PO₄ are formed from 9 moles of P₄O₁₀.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
As per the reaction, 1 mole of P₄O₁₀ produces 4 moles of H₃PO₄, thus 9 moles of P₄O₁₀ will produce 9×4=36 moles of H₃PO₄.
Thus,36 moles of H₃PO₄ are formed from 9 moles of P₄O₁₀.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
Answer:36
Explanation:
taking the class just got it right
The photoelectron spectrum for the element nitrogen is represented above. Which of the following best explains how the spectrum is consistent with the electron shell model of the ato
f the atom?
A. The leftmost peak represents the valence electrons.
B. The two peaks at the right represent a total of three electrons.
C. The electrons in the ls sublevel have the smallest binding energy
D. The electrons in the 2p sublevel have the smallest binding energy
The electrons in the 2p sub level have the smallest binding energies, which is the best explanation for how the spectrum is consistent with the electron shell model of the atom. Option D is correct as a result.
Photoemission spectroscopy, often referred to as photoelectron spectroscopy, measures the amount of energy emitted by electrons from solids, gases, or liquids via the photoelectric effect. This procedure involves getting the energy for the electrons from an outside source, such as sunlight.
The photoelectric effect is a process in which electrons receive energy from an external source, such as sunlight, become excited, and transition from the ground state to the excited state. As a result of this process, there is a constant flow of electrons, which in turn causes a flow of energy.
Learn more about spectrum here:
https://brainly.com/question/11837978
#SPJ4
Write the balanced chemical equation that represents the addition of CL2 to CH3CH=CH2.
The balanced chemical equation that represents addition of CL2 to CH3CH=CH2 is : CH3CH=CH2 = CL2 > CH3CHClCH2Cl.
What is meant by balanced chemical equation?Balanced chemical equations have the same number and type of each atom on both the sides of an equation. Coefficients in a balanced equation has to be the simplest whole number ratio and mass is always conserved in chemical reactions.
Balanced equation is an equation for a chemical reaction where the number of atoms for each element in the reaction and total charge is same for both the reactants and products. In other words, we can say that mass and the charge are balanced on both sides of a reaction.
To know more about balanced chemical equation, refer
https://brainly.com/question/11904811
#SPJ4
The kind of molecular motion that mostly relates to the temperature of a substance is
A) translational motion.
B) rotational motion.
C) vibrational motion.
D) all about equally
The kind of molecular motion that mostly relates to temperature of a substance is : A) translational motion.
What is meant by translational motion?Motion in which all the points of a moving body moves uniformly in the same direction. If object is undergoing translatory motion, we can see that there is no change in the orientation of object. Translatory motion is also called translational motion.
In kinetic theory of gasses, increasing the temperature of a gas increases the average kinetic energy of the molecules, causing an increased motion. This increased motion increases outward pressure of the gas, which an expected result from the ideal gas equation (PV=NkT).
To know more about translational motion, refer
https://brainly.com/question/1995481
#SPJ4
Which of the following is consistent with an exothermic reaction that is nonspontaneous at high temperatures?
A.
?H > 0, ?S > 0, ?G < 0
B.
?H < 0, ?S < 0, ?G > 0
C.
?H < 0, ?S > 0, ?G > 0
D.
?H > 0, ?S < 0, ?G < 0
E.
?H < 0, ?S > 0, ?G < 0
As a result, option c is correct: H must be negative and S must be positive.
What is exothermic reaction?Energy is transmitted to or from the surroundings when a chemical reaction occurs. An exothermic reaction occurs when energy is transmitted to the surroundings, and the temperature of the surroundings rises. The term exothermic implies "heating up." As an exothermic process progresses, energy, frequently in the form of heat, is released. An exothermic reaction is one that is chemical in nature and is characterized by the release of energy in the form of heat or light. Matching a light with a matchstick is an example of this sort of reaction in which the release is both heat and light.
Here,
The spontaneity can be determined by the equation as:
ΔG=ΔH−TΔS
If the Gibbs free energy is negative, it gives a spontaneous reaction. Hence, the ΔH must be negative and ΔS must be positive.
If the Gibbs free energy is positive then it will be non-spontaneous. Hence, ΔS must be negative at very high temperature.
Therefore, option c is correct that is the ΔH must be negative and ΔS must be positive.
To know more about exothermic reaction,
https://brainly.com/question/10373907
#SPJ4
to produce 4.00 L of a 250. mM solution of sodium hydroxide, how many grams of NaOH must bee dissolved
You may determine the number of moles of solution you need by multiplying the volume in liters (4.00L) by the solution's molar concentration (0.250M), and then by the mass of sodium hydroxide (39.99 g/mol) in molar form. 1L = 39.99g × 4.00L x 0.250 M x 39.99g
The number sodium hydroxide of moles of solute dissolved in one liter of a solution is known as its molarity.
where,
250 mM Molarity =
moles of solute = n
= liquid volume in milliliters = 4L = 4000 ml
Now, using the molarity formula to combine all the values provided, we obtain
To learn more about sodium hydroxide please click on below link
https://brainly.com/question/29327783
#SPJ4
A group of students decided to test some parameters of gases using a balloon. The students filled two balloons to the same volume. One balloon was placed in a freezer and the other was left at room temperature. The balloons were left and checked after three hours.
Student A claimed that the balloon in the freezer would be the same size as the balloon at room temperature after the three hours were up.
Student B claimed that the balloon in the freezer would be larger than the balloon at room temperature after three hours.
Student C claimed that the balloon in the freezer would be smaller than the balloon at room temperature after three hours.
Which student's claim is correct? Explain your reasoning!
Answer:
Student C.
Explanation:
At higher temperatures, the particles move faster and collide with each other more frequently, which causes the gas to occupy a larger volume. At lower temperatures, the particles move slower and collide less frequently, which causes the gas to occupy a smaller volume.
When the balloon is placed in the freezer, the temperature inside the balloon will also decrease, causing the gas particles to slow down and collide less frequently, which leads to a decrease in the volume of the gas, hence the balloon will shrink or contract. On the other hand, the room temperature balloon will experience no significant change in the temperature and the gas particles inside the balloon will remain at the same level of activity, causing the balloon to retain the same volume.