either elements or compounds which are present prior to a chemical reaction

Answer:

A-10

Explanation:

In the SI, designations of multiples and subdivision of any unit may be arrived at by combining with the name of the unit the prefixes deka, hecto, and kilo meaning, respectively, 10, 100, and 1000, and deci, centi, and milli, meaning, respectively, one-tenth, one-hundredth, and one-thousandth.

IM NOT SURE PO

Finding molar mass of NaOH

We know that

Molar mass of Sodium (Na) = 23 g/mol

Molar mass of Oxygen (O) = 32 g/mol

Molar mass of Hydrogen (H) = 2 g/mol

So,

Mass of 1 mole of NaOH

=> 1 × 23 + 1 × 16 + 1 × 1

=> 23 + 16 + 1

=> 40 g/mol

Now,

Mass = 40 × 0.25

Mass = 10 g

Answer:

12.5grams would remain after time has elapsed

Answer:

Hg Pb are in one, Li and B and O are in one, and NaCl are in one, As is alone

Explanation:

Periods are horizontal

Hope this helps!

Answer:

mercury 13.6 has a great density than milk

Answer:

It is strongly recommended that students do NOT wear contacts lenses in the laboratory. Chemical vapors may penetrate the contact lens material and cause the lens to adhere to one's eye, which could be detrimental to the eye. Goggles are not vapor tight and do not completely eliminate this absorption.

Answer:

hydrogen and helium is the answer.

The answer would be B.

When glucose reacts with oxygen, it forms an ATP that is used by the given cell. Co2 and h2O are the byproducts.

Answer:

non-metals

Explanation covalent bonds occur between elements that are far apart on the periodic table.

The types of elements that are significantly involved in covalent bonding are known as non-metals.

Covalent bonding may be defined as a type of chemical bonding that may involve the mutual sharing of electrons in order to construct electron pairs between atoms of non-metals. These electron pairs which are formed between atoms are known as bonding pairs or shared pairs.

According to the context of this question, covalent bonds are generally formed between nonmetals. While metallic bonds are the type of chemical bonds which are typically formed between the metallic element.

Another type of bonding may also be formed between elements. This type of bonding is known as Ionic bonding. This chemical bonding mat generally arises between metals and non-metals.

Therefore, the types of elements that are significantly involved in covalent bonding are known as non-metals.

To learn more about Covalent bonding, refer to the link:

https://brainly.com/question/3447218

#SPJ2

Answer:

ion- ion> H - bonding > dipole > dipole> london dispersion

Answer:

4.51 x 10 to the 23 power

Explanation:

Answer:

It's option b) Aquifer.

Answer:

[tex] \huge{5.632 \times {10}^{ - 19} \: J}[/tex]

Explanation:

The energy of the proton can be found by using the formula

where

E is the energy in J

f is the frequency in Hz

h is the Planck's constant which is

6.626 × 10-³⁴ Js

From the question we have

E = 6.626 × 10-³⁴ × 8.5 × 10¹⁴

We have the final answer as

[tex]5.632 \times {10}^{ - 19} \:J[/tex]

Hope this helps you

The bonding activity that occurs between phosphorus and chlorine is Covalent Bonding

Covalent bonding is an interaction between two atomic elements that share electrons between themselves.

In Phosphorus Pentachlorine PCl₅, covalent bonding occurs between Phosphorus and Chlorine.

This is because, Phosphorus is the central atom that is attached to 5 different chlorine atoms, each chlorine atom needs one electron each to complete its octet rule and since phosphorus has five valence electrons in its outermost shell, it shares it with each of the chlorine atoms.

Learn more about covalent bonding here:

https://brainly.com/question/1853488

Answer:

Covalent Bonding

Answer:

Coca-Cola or Pepsi

Explanation:

Im sure one of those

Archaea (Archaeon ): Single-celled microorganisms without nuclei and with membranes different from all other organisms. Once thought to be bacteria.

Unicellular organism

-A unicellular organism, also known as a single-celled organism, is an organism that consists of a single cell, unlike a multicellular organism that consists of multiple cells. Unicellular organisms fall into two general categories: prokaryotic organisms and eukaryotic organisms.

Answer:

The conductance will increase as the concentration of the electrolyte is increased.  

Explanation:

The ions are what carry the charges from one electrode to another.  The more there are, the easier it is for electrons to get across the solution of electrolyte,

We are given that–

[tex]\qquad[/tex]________________________

As we know –

[tex]\qquad[/tex][tex] \pink{\bf\longrightarrow {Mass = Volume \times Density } }[/tex]

[tex]\qquad[/tex][tex] \bf\longrightarrow Mass_{(Propane)} = 389 \times 19.3 [/tex]

[tex]\qquad[/tex][tex] \bf\longrightarrow Mass_{(Propane)} = 7507.7 \: g[/tex]

[tex]\qquad[/tex]______________________

Mass of a substance is the amount of the constituting particles per unit volume. The mass of the [tex]\bold { 389\ cm^3}[/tex] of propane is 7.507 kg.

Mass of a substance is the amount of the constituting particles per unit volume. It is measured in kilograms (kg).

The formula for mass,

M =  v x d

Where,

M - mass

v - volume = [tex]\bold { 389\ cm^3}[/tex]

d - density = 19.3 g/cm

Put the values in the formula,

M =  [tex]\bold { 389\ cm^3}[/tex]  x   19.3 g/cm

M = 7507.7 g

M  = 7.507 kg

Therefore, the mass of the [tex]\bold { 389\ cm^3}[/tex] of propane is 7.507 kg.

To know more about density,

https://brainly.com/question/952755

Astrobiologist means someone who studies the possibilities of life beyond earth. what would YOU do to search for life? They're asking for your opinion :)

Answer:

Our process will be to change the mass of NO2 to moles by dividing by the molar mass, and then we multiply the number of moles with Avogadro's number (6.02 x 10^23)

Molar mass of NO2 = (14) + (16)x2 = 46g/mol

45.8/46 = 0.99 or just 1 mole when you round it.

Now just multiply the moles with Avogadro's number

1 x (6.02 x 10^23)

= 6.02 x 10^23 molecules of NO2 reside in 45.8g of NO2

The enthalpy of this reaction is -296. 8 kJ/mol.

The equation of the reaction is;

S(s) + O2(g) -----> SO2(g)

Recall that the enthalpy of the reaction can be obtained from the formula;

ΔHrxn = ΔHf(products) - ΔHf(reactants)

We know that;

ΔHf S(s) = 0 KJ/mol

ΔHf O2(g) =  0 KJ/mol

ΔHf SO2(g) = -296. 8 kJ/mol

Hence;

ΔHrxn =  -296. 8 kJ/mol - [0 KJ/mol + 0 KJ/mol]

ΔHrxn = -296. 8 kJ/mol

Learn more: https://brainly.com/question/13164491

Answer:

Raise

Explanation:

H+ ions are acidic and lower the PH of water.

If Kelli and Jarvis maintain a forward force of 524 N for 1.44 seconds on a 158-kg piano, the acceleration will be 0.671 m/s² and the final velocity will be 0.966 m/s.

Kelli and Jarvis exert a force of 524 N on a 158- kg (m) piano.

The friction force, which opposes this force, is 418 N.

The net force (F) is the difference between both forces.

F = 524 N - 418 N = 106 N

We can calculate the acceleration (a) of the piano using Newton's second law of motion.

Newton's second law of motion states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force and inversely proportional to the mass of the object.

a = F/m = 106 N/158kg = 0.671 m/s²

The piano start from rest (u = 0 m/s) and moves with an acceleration of 0.671 m/s² for 1.44 s.

We can calculate its final velocity (v) using the following kinematic equation.

v = u + a × t

v = 0 m/s + 0.671 m/s² × 1.44 s = 0.966 m/s

If Kelli and Jarvis maintain a forward force of 524 N for 1.44 seconds on a 158-kg piano, the acceleration will be 0.671 m/s² and the final velocity will be 0.966 m/s.

Learn more about Newton's second law of motion here: https://brainly.com/question/10673278

The enthalpy of reaction for the decomposition of calcium carbonate is 177.4  KJ/mole .

We know that the enthalpy of reaction can be obtained from the enthalpy of formation of the reactants and that of the products using the formula;

ΔHrxn = ΔHf (products) - ΔHf (reactants)

The heat of formation of the species are as follows;

ΔHf (CaCO3(s)) = −1206.9 KJ/mol

ΔHf (CaO(s)) =  - 636 KJ/mole

ΔHf (CO2(g)) = -393.5  KJ/mole

ΔHrxn = [( -393.5  KJ/mole ) + ( - 636 KJ/mole)] - [ −1206.9 KJ/mol]

ΔHrxn = 177.4  KJ/mole

Learn more: https://brainly.com/question/13164491

Answer:

First one is 656.3 and second is endothermic.

Explanation:

Edge Thermochemical Equations assignment

Single-displacement reaction occurs when aluminum reacts with copper nitrate.

Single-displacement reaction is the type of chemical reaction that occurs when aluminum (Al) reacts with copper nitrate (Cu(NO3)2). In this type of reaction, aluminum takes the place of copper and produced aluminium nitrate.

Aluminum does not react with potassium nitrate (KNO3) although it reacts with copper nitrate because potassium nitrate (KNO3) is a stable compound which held each other very tightly so we can conclude that Single-displacement reaction occurs when aluminum reacts with copper nitrate.

Learn more about chemical reaction here: https://brainly.com/question/11231920

Learn more: https://brainly.com/question/25945286

The paths that planets follow around the sun are called as orbit, and they are shaped like an ellipse.

The orbits of the planets around the sun are elliptical. Kepler, an astronomer, provided a clear definition of these orbits. The three rules he created are referred to as Kepler's laws of planetary motion. It says that every planet does an orbit around the sun.

The plane of Earth's orbit around the sun serves as the definition of the ecliptic. The primary planets of our solar system, their moons, some asteroids, and their orbits all roughly follow this plane.

An orbit is a curved path taken by an object, such as a planet's path around a star, a natural satellite's path around a planet, or a man-made satellite's path around a planet, moon, or asteroid.

Thus, the paths that planets follow around the sun are called as orbit.

To learn more about an orbit, follow the link;

https://brainly.com/question/20435529

#SPJ12

The answer is going to be a nuclear reactor