The relationship between temperature and reaction speed is direct.
The speed of a reaction accelerates with temperature.
How does the practical impact of temperature on reaction rate work?
The kinetic energies of A and B both increase with rising temperature, leading to more collisions per second and a higher proportion of these resulting in chemical reactions. As a result, the rate typically rises as temperature rises.
What are the rates of reaction?
The rate of reaction when concentration is changed can be gauged in two different ways. By assessing a liquid's "cloudiness," it is possible to gauge how quickly a precipitate forms. The second involves using a measuring cylinder or gas syringe over water to gauge the volume of gas produced.
What are the 4 factors that affect the rate of reaction?
temperature, pressure, and reactant type, along with concentration.
To know more about the factors affecting the rate of reaction:
https://brainly.com/question/14817541
#SPJ1
The pot of water on the hot stove begins to boil rapidly. A glass lid is placed on the pot and water droplets begin forming on the inside of the
lid. What best describes what happened?
A. Steam cools and water molecules moved closer together.
B. Water from outside leaked into the pot.
C. Hydrogen and oxygen combined to form water.
D. Steam combined with the air to wet the inside of the lid.
and
What happened was that steam cools and water molecules moved closer together. Option A.
What is condensation?Condensation is a change of phase during which water vapor changes to liquid as a result of loss of energy.
When water boils, molecules of water move from liquid and become gases. These gases are known as water vapor. Once this vapor loses energy, they condense back into liquids.
Thus, the water droplets forming on the inside of the glass lid is as a result of the cooling of water vapor and the resulting water molecules moving closer together.
More on condensation can be found here: https://brainly.com/question/15563071
#SPJ1
when solutions of strong electrolytes in water are formed, the ions are surrounded by water molecules. these interactions are described as a case of .
This is a case of electrostatic interactions.
What is electrostatic interactions ?Electrostatic interactions refer to the attractive or repulsive forces that occur between two objects with opposite electrical charges. These forces are caused by the electromagnetic field created when a charge is placed on a material. An example of an electrostatic interaction would be when a balloon is rubbed against a wool sweater and the balloon is subsequently attracted to the surface of a wall. The attraction is caused by the transfer of electrons from the wool sweater to the balloon, which gives the balloon a negative charge in relation to the wall, which has a positive charge. The opposite charges between the balloon and the wall create an electrostatic force of attraction. Electrostatic interactions are typically much weaker than covalent or ionic bonds, but they can still be significant.
When strong electrolytes dissolve in water, the ions separate from the compound and become surrounded by water molecules. The water molecules have a partial negative charge on the oxygen atom and a partial positive charge on the hydrogen atoms.
To learn more about electrostatic interactions
https://brainly.com/question/29788201
#SPJ4
a sample of calcium bromide contains 20% calcium and 80% bromine by mass. what is the empirical formula of the compound formed?
A sample of calcium bromide contains 20% calcium and 80% bromine by mass. The empirical formula of the compound formed is CaBr2
Given:
A substance with the chemical formula 20% Ca and 80% Br.
In search of:
When the compound's molecular weight is 200.
Let's say that the mixture formed is 100.
Let's search for the mole of Ca and Br individually now.
Ca mole = 20/40 = half
"Mole of Br" = "80/80"
CaBr2 is the result of the 1:2 ratio between Ca and Br.
So, the empirical formula is CaBr2.
An empirical formula is a chemical formula for a compound that only specifies the ratios of the elements present in the molecule and not the exact number or arrangement of atoms. This would be the element to whole number ratio of the lowest valued compound.
Learn more about calcium bromide from here:
https://brainly.com/question/889279
#SPJ4
Describe the geologic events that occur at a divergent tectonic plate boundary and the process that causes these events.
Answer: A divergent boundary occurs when two tectonic plates move away from each other. Along these boundaries, earthquakes are common and magma (molten rock) rises from the Earth's mantle to the surface, solidifying to create new oceanic crust.
yes very good
Use your answers in Part A and Part B to compare the differences in temperatures between the two sites.
Answer:
uhhh
Explanation:
uhhh
As you answer the following questions, write explanations for why your current answer is correct
Answer:
volcanic erruption do not cause earth quakes
properties are dependent on the amount of substance. an example is . properties are independent of the amount of substance. an example is .
A property known as an extensive property depends on the quantity of matter in a sample.
Intensive properties are independent of the amount of substance present.
What is substance?
A form of matter with predictable chemical composition and physical properties is referred to as a chemical substance. According to some references, a chemical substance cannot be physically divided into its component parts without rupturing chemical bonds.
Any substance that takes up space has mass, and is inert is said to be matter. The distinctive qualities that each substance possesses can be used to distinguish these substances from one another. Depending on how much of the substance is being described, these characteristics may or may not be affected.
The amount of the substance present has no bearing on the intensity of the properties. They could also be bulk properties. The trait remains constant. Intensive properties remain the same size. Intensive properties include things like density, temperature, pressure, and others.
The quantity of a substance affects its extensive properties. They are simple to recognize. Extensive properties' sizes change. It is calculable. Some examples of extensive properties are size, mass, length, and weight.
To learn more about the properties of substance, click on the below link:
https://brainly.com/question/24415905
#SPJ4
an aqueous solution is 40.0 % by mass potassium bromide, kbr, and has a density of 1.37 g/ml. the mole fraction of potassium bromide in the solution is
Mole fraction of potassium bromide: 0.452. To find the mole fraction of a solute in a solution
we need to determine the number of moles of solute and the total number of moles of solute and solvent.
We can first calculate the mass of potassium bromide in the solution, which is 40.0 g/100 g * 40.0 g = 16.0 g.
Then, we can convert the mass to moles using the molar mass of potassium bromide, which is 119.0 g/mol.
The number of moles of potassium bromide is 16.0 g / 119.0 g/mol = 0.134 mol.
Next, we can calculate the volume of the solution using its density, which is 1.37 g/mL * 16.0 g / 1.37 g/mL = 11.67 mL.
Finally, we can convert the volume to liters and use the number of moles of potassium bromide to find the number of moles of solvent (water).
The number of moles of solvent is 11.67 mL * 1 L/1000 mL = 0.0117 L * 1000 g/L = 11.7 g.
The total number of moles is 11.7 g / 18.0 g/mol = 0.65 mol. The mole fraction of potassium bromide is 0.134 mol / 0.65 mol = 0.452.
Learn more about Mole fraction here:
https://brainly.com/question/29808190
#SPJ4
Chemical Calorimetry: 40 grams of a sodium chloride are added to 150 grams of water. The water cools by 5 degrees Celsius. What is the heat of solution of the sodium chloride?
40 grams of a sodium chloride are added to 150 grams of water. The water cools by 5 degrees Celsius. Therefore, 3974.8J is the heat of solution of the sodium chloride.
What is calorimetry?Calorimetry (from Latin calor 'heat' and Greek v (metron)'measure') is the science or act of trying to measure changes in state factors of a body to derive the temperature difference associated with changes in its state caused by chemical interactions, physical changes, as well as phase transformations under specified constraints.
A calorimeter is used to perform calorimetry. The discipline of calorimetry is considered to have been founded by Scottish physician as well as scientist Joseph Black, who became the first to establish the distinction among heat and temperature.
q = m ×c×ΔT
= 190 ×4.184×5
=3974.8J
Therefore, 3974.8J is the heat of solution of the sodium chloride.
To learn more about calorimetry, here:
https://brainly.com/question/2240330
#SPJ1
Write a procedure for making the solutions for the three compounds listed
above. Then make a procedure for mixing the compounds. Remember you want to
NOT mix them all together but rather have each mix with the other two
compounds in separate containers. The following is a list of materials available for
the lab.
Calcium chloride sodium carbonate copper sulfate
Graduated cylinders plastic solution containers
test tubes
tap water
scale
When calcium chloride is react with sodium carbonate there is formation of precipitate of calcium carbonate. The reaction is as follows:
CaCl2(aq]+Na2CO3(aq] → CaCO3(s]⏐↓+2NaCl(aq]
What is precipitation ?The term precipitation is defined as the process of conversion of a solution into solid by converting the substance into insoluble form or by making the solution a super saturated one.
Take two containers for Calcium chloride and sodium carbonate, measure with the help of graduated cylinders, then take these two compounds in a separate test tube and add tap water in it.
Thus, When calcium chloride is react with sodium carbonate there is formation of precipitate of calcium carbonate.
To learn more about the precipitation, follow the link;
https://brainly.com/question/18109776
#SPJ1
would you expect beo to have the sodium chloride, zinc blende, or fluorite structure? based on your answer, determine (a) the lattice parameter; (b) the density; and (c) the packing factor
Berkelium oxide (BeO) has a hexagonal close-packed (HCP) crystal structure, similar to the fluorite structure.
The lattice parameter can be calculated using the formula for the HCP structure: a = 4R/√3, where R is the radius of the bekelium ion. The density of BeO can be determined using the formula: density = mass/volume, where the mass can be calculated based on the number of BeO molecules and their atomic masses and the volume can be calculated based on the lattice parameter. The packing factor is the ratio of the volume occupied by the ions to the total volume of the crystal structure and can be calculated based on the arrangement of ions in the HCP structure. Overall, to determine the lattice parameter, density, and packing factor of BeO, it is necessary to know the exact crystal structure and atomic arrangement of the material.
Learn more about Berkelium oxide:
brainly.com/question/10197416
#SPJ4
indicate the principal type of solute-solvent interaction in each of the following solutions.
KCl in water
a. London dispersion forces
b. Ion-dipole interaction
c. Hydrogen bonding
d. Dipole-dipole interaction
a. London dispersion forces- intermolecular force is exist between an CO2 molecules.
b. Dipole-dipole interaction- intermolecular force is exist between an CO molecules.
What is solution?A steady change in the relative ratios of two or more substances up to the point at which they become homogenous when combined; this point is known as the limit of solubility.
What is solute?Solute refers to an object that dissolves in a solution. In fluid solutions, there is a larger concentration of solvent than solute. Salt and water are two excellent examples of substances that we use on a daily basis. Since salt dissolves in water, it serves as the solute.
a. London dispersion forces- intermolecular force is exist between an CO2 molecules.
b. Dipole-dipole interaction- intermolecular force is exist between an CO molecules.
c. Hydrogen bonding- Methanol, ethanol, ammonia, and methylamine are soluble in water because they can form.
d. Ion-dipole interaction- intermolecular force is responsible for the attraction between an KCl and a water molecule.
Therefore, The principal type of solute-solvent interaction in each of the following solutions are mentioned below.
Learn more about solution from the given link.
https://brainly.com/question/16159788
#SPJ4
why is it called a diffusion equation ? why is it referred to as a minority carrier equation ? why this equation is valid only under low-level injection conditions?
A diffusion equation is called so because it describes the diffusion of charge carriers in a material. The equation models the way in which the concentration of charge carriers (such as electrons or holes) changes over time and space in response to a concentration gradient.
Why is it referred to as a minority carrier equation ?
The minority carrier equation refers to the equation specifically for the case where the minority carrier species (i.e., the species with a lower concentration) is being considered. The equation is used to describe the diffusion of the minority carriers in a material, such as a semiconductor.
The diffusion equation is valid only under low-level injection conditions because at high injection levels, the carrier concentration becomes so large that the diffusion process is no longer described accurately by the simple diffusion equation. In this case, other effects such as recombination and generation become important, and the equation must be modified to account for these additional processes.
To learn more about diffusion equation:
https://brainly.com/question/14957639
#SPJ4
does salicylic acid or benzoyl peroxide work better for cystic acne?
Salicylic acid by itself should effectively unclog your pores if you have blackheads and whiteheads. Choose benzoyl peroxide to stop outbreaks at the root if your acne frequently manifests as inflammatory papules and pustules. Start with salicylic acid for sensitive skin because it's less likely to irritate it.
What is salicylic acid?Depending on the dose form and strength of the preparation, salicylic acid topical is used to treat a variety of skin conditions, including psoriasis, psoriasis of the skin and scalp, calluses, corns, common warts, and plantar warts.
What is the difference between benzoyl peroxide and salicylic acid?
Salicylic acid and benzoyl peroxide differ greatly in how they are used: While benzoyl peroxide truly destroys the bacteria that causes acne, salicylic acid purges whatever is hiding in your pores.
Salicylic acid opens pores and has a slight sloughing, exfoliating action, according to research on the chemical distinctions between these two acne-fighting ingredients. But because benzoyl peroxide has higher antioxidant and anti-microbial properties, it is more effective at curing acne.
Therefore, Salicylic acid or benzoyl peroxide work better for cystic acne is mentioned above.
Learn more about salicylic acid from the given link.
https://brainly.com/question/14711636
#SPJ4
if 40.4 g ne, 12 g of he, and 83.8 g kr are in a container at a pressure of 950 mmhg, what is the partial pressure of the he?
Partial pressure of the He in a container at a pressure of 950mmHg is 475mmHg.
In a combination of gases, every constituent gas has a fractional strain which is the notional pressure of that constituent gas as though it alone involved the whole volume of the first blend at the equivalent temperature.[1] The complete tension of an ideal gas combination is the amount of the halfway tensions of the gases in the combination (Dalton's Regulation).
The partial pressure of a gas is a proportion of thermodynamic movement of the gas' particles. Gases break up, diffuse, and respond as per their fractional pressure however not as per their fixations in gas blends or fluids. This overall property of gases is likewise obvious in substance responses of gases in science. For instance, the essential measure of oxygen for human breath, and the sum that is poisonous, is set by the incomplete tension of oxygen alone.
Partial pressure=mole fraction amount ×total pressure.
So,mole fraction= [(12/4) / (12/4) + (40/20.179) + (83.8/83.798) ]
=>Partial pressure=3 / (3+2+1) ×950
=>Partial pressure=(3 ×950) / 6
=>Partial pressure=475mmHg.
Hence,partial pressure of the He is 475mmHg.
To know more about partial pressure,visit here:
https://brainly.com/question/14281129
#SPJ4
in the accepted mechanism for acetal hydrolysis, how many steps can be classified as nucleophilic attack?
There are two steps in the accepted mechanism for acetal hydrolysis that can be classified as nucleophilic attack.
What is nucleophilic attack?
Nucleophilic attack is a chemical reaction in which a nucleophile (an electron pair donor) reacts with an electrophile (an electron pair acceptor) to form a bond. This reaction occurs when the nucleophile donates a pair of electrons to the electrophile, forming a new covalent bond. Nucleophilic attack is a key part of many organic reactions, such as SN2 reactions and acid-base reactions. In addition, nucleophilic attack can be used to form complexes with transition metals, as well as to facilitate reactions such as alkylation and acylation. It is important to know the reactivity of both the nucleophile and the electrophile in order to predict the outcome of the reaction.
To learn more about nucleophilic attack
https://brainly.com/question/27178362
#SPJ4
advantage and disadvantage of rusting
Answer:
...!!#!#(#!#;$(#(
Explanation:
h++++++++
a student was proposing a synthesis of the ketone shown (cyclopentanone). which, if any, of the steps in this synthesis would be problematic?
The proposed synthesis of the cyclopentanone involves hydration of an alkene, which will not provide the desired product.
Additionally, the proposed reaction is a reversible reaction, so there is a risk of a competing reverse reaction that would result in the production of the starting material rather than the desired product.
Therefore, the hydration step of this synthesis would be the most problematic.
The hydration of an alkene is a reversible reaction, which means that it is possible for the reaction to go in the opposite direction and produce the starting material instead of the desired product. This can be a major problem when attempting to synthesize a given compound, as it can lead to a decrease in yield or even complete failure to synthesize the desired product.
Learn more about ketone synthesis :
https://brainly.com/question/27179090
#SPJ4
A tire contains 455 cubic inches of air at a temperature of 35 degrees C. If the temperature drops to 3 degrees C, what volume will the air in the tire occupy assuming there is no change in pressure or mass?
The volume of air in the tire will decrease as the temperature drops. This can be calculated using the Ideal Gas Law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature.
Since the pressure and number of moles are constant, we can rearrange the equation to solve for the volume:
V = nRT / P
We can use the initial volume and temperature to calculate the new volume with the lower temperature:
V2 = V1 × (T2 / T1)
where T1 is the initial temperature and T2 is the final temperature.
Plugging in the numbers:
V2 = 455 [tex]in^{3}[/tex] × (3 C / 35 C)
V2 = 455 [tex]in^{3}[/tex] × 0.085714
V2 = 39.06 [tex]in^{3}[/tex]
So the volume of air in the tire will decrease to 39.06 cubic inches ([tex]in^{3}[/tex]) as the temperature drops from 35 degrees C to 3 degrees C.
What is the ideal gas law?The ideal gas law is an equation that explains the connection between an ideal gas's pressure, volume, and temperature. It claims that an ideal gas's pressure is inversely related to its volume and directly proportionate to its temperature (measured in Kelvin). PV = nRT denotes the equation, where P denotes pressure, V denotes volume, n is the number of moles of gas, R denotes the ideal gas constant (8.31 J/mol-K), and T denotes Kelvin temperature. Although the ideal gas law idealizes real gases, it offers a decent approximation for many gases under typical circumstances. Although it has some restrictions, it is a good approximation of the behavior of numerous gases under various circumstances.
To know more about the ideal gas law, check out:
https://brainly.com/question/15132707
#SPJ1
all of the following could be considered substitute products for industrial electricity generation except: group of answer choices solar. wind. ethanol. coal. hydropower.
Coal could not be considered as substitute products for industrial electricity generation as it is limited and non-renewable in nature.
Generally, coal is defined as a type of sedimentary deposit that is composed predominantly of carbon that is readily combustible. Coal is usually black or brownish-black in color and coal has a composition that which include inherent moisture and consists of more than 50 percent by weight and more than 70 percent by volume of coal contains carbonaceous material.
Coal is classified as a nonrenewable energy source because more than millions of years are required to form coal. The energy which are stored in coal is formed by plants that lived hundreds of millions of years ago in dense and swampy forests.
Hence, Coal could not be considered as substitute products for industrial electricity generation as it is limited and non-renewable.
Learn more about coal from the link given below.
https://brainly.com/question/30560160
#SPJ4
10. calculate the mole fraction of h2so4 in 9.61 m h2so4. the density of the solution is 1.520 g/ml.
We must first determine the number of moles of H2SO4 contained in one litre of 9.61 M H2SO4 solution in order to compute the mole fraction of H2SO4.
The formula for calculating the amount of H2SO4 in the solution is:
Moles of H2SO4 are calculated as follows: 9.61 mol/L x (1000 mL / 1 L) = 9610 mmol; molarity of H2SO4 x volume of solution in litres
Calculating the solution's mass is the next step. To accomplish this, we can use the solution's density:
moles of all components = mass of solution / molecular weight of H2SO4 = 1520 g / 98.079 g/mol = 15.50 mol moles of H2SO4 / moles of all components = 9610 mmol / (15.50 mol x 1000 mmol/mol) = 0.620 mole fraction of H2SO4 = moles of H2SO4 / moles of all components = 9610 mmol
Hence, 0.620 moles of H2SO4 make up the solution.
Learn more about H2SO4 here:
https://brainly.com/question/4025929
#SPJ4
Please help meeeeeeeeeeee
Answer:
This question cannot be answered as written, as it asks to convert 6.55 mol Na2SO4 to mass of NaOH, but the equation given is for the reaction between NaOH and CaSO4.
Explanation:
The equation given in the question (CaSO4 + 2 NaOH -> Na2SO4 + Ca(OH)2) describes a reaction between Calcium Sulfate (CaSO4) and Sodium Hydroxide (NaOH) to form Sodium Sulfate (Na2SO4) and Calcium Hydroxide (Ca(OH)2). However, the question asks to convert 6.55 mol Na2SO4 to the mass of NaOH, which cannot be done using this equation. To answer the question as written, a balanced chemical equation between Na2SO4 and NaOH would be needed.
Are cations and anions only in ionic compounds?
Yes, cations and anions are only found in ionic compounds.
An ionic compound is a type of chemical compound made up of cations (positively-charged ions) and anions (negatively-charged ions) held together by strong electrostatic forces called ionic bonds.Ions are the building blocks of ionic compounds, which are kept together by electrostatic forces.They are formed by the chemical bonding of a metal and a nonmetal. Ionic compounds are typically composed of positively charged cations (usually metals) and negatively charged anions (usually nonmetals). Examples of common ionic compounds include sodium chloride (NaCl), magnesium oxide (MgO), and calcium carbonate (CaCO3). An anion is an ion with a negative charge. Anions are formed when atoms gain electrons.A cation is an ion with a positive charge. Cations are formed when atoms lose electrons.
learn more about ionic compounds Refer:brainly.com/question/9167977
#SPJ4
a 5 l flask contains 0.60 g of oxygen gas at a temperature of 22 degrees c. what is the pressure, in mm hg, inside the flask?
The pressure inside the flask is approximately 3307.2 mm Hg.
First, we need to calculate the number of moles of oxygen gas in the flask:
Mass of oxygen = 0.60 g
Molar mass of oxygen = 16.0 g/mol
n = mass / molar mass = 0.60 / 16.0 = 0.0375 moles
Next, we need to convert the temperature from Celsius to Kelvin:
T (Kelvin) = T (Celsius) + 273 = 22 + 273 = 295 K
And the gas constant R = 0.0821 Latm/molK
Plugging in the values into the Ideal Gas Law:
P = (nRT) / V = (0.0375 x 0.0821 x 295) / (5 x 10^-3) = 4.37 atm
Finally, to convert atm to mm Hg, we multiply by 760 mm Hg/atm:
P (mm Hg) = 4.37 x 760 = 3307.2 mm Hg
Ideal Gas Law is an equation that explains the behavior of an ideal gas. An ideal gas is a theoretical gas that follows a set of defined rules and behaves in a certain way under specific conditions. Ideal gas law is expressed as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
This law states that the pressure, volume, and temperature of an ideal gas are proportional to each other and can be used to predict the behavior of gases under different conditions. The ideal gas law is useful for a wide range of applications, from engineering to thermodynamics, and is a key concept in the study of gases.
To learn more about Ideal Gas Law visit here:
brainly.com/question/13821925
#SPJ4
give one function of iron in plants
A function of iron in plants is to carry photosynthesis because this mineral is involved in the synthesis of chlorophyll.
What is the relative importance of iron to perform photosynthetic activities in plants?The relative importance of iron to perform photosynthetic activities in plants is crucial in the sense it is used to generate chlorophyll molecules.
Therefore, with this data, we can see that the relative importance of iron to perform photosynthetic activities in plants is associated with the production of the pigment required to absorb light energy during this type of process.
Learn more about photosynthetic activities in plants here:
https://brainly.com/question/1615639
#SPJ1
b. the ph of the stomach can influence the ionization of drugs such as aspirin (aka acetylsalicylic acid or hasp). given that at equilibrium the ph of a 0.1 m aspirin is 2.24, what is the pka of aspirin?
The pKa of a compound is the pH at which the compound is half-ionized. At a pH of 2.24, the aspirin is mostly in the form of its acid, so we can assume that the pKa of aspirin is 2.24.
What is half-ionized ?Half-ionized refers to a state where some, but not all, of the molecules or atoms have had one or more of their electrons removed and become positively charged ions. This can occur either naturally in a gas or as a result of electromagnetic radiation, such as X-rays, passing through the gas. In some cases, such as in the interstellar medium, the gas is only partially ionized, meaning that only a fraction of the atoms or molecules have been affected. In such cases, the fraction of the gas that has been ionized is referred to as the ionization fraction. Half-ionized gas can be found in extreme environments, such as those found in star-forming regions or in the outer layers of the atmosphere of Jupiter. The half-ionized state can also be found in laboratories, where lasers can be used to create plasmas with a range of ionization fractions.
[tex]$$\begin{aligned}& \text { Reaction :- Aspirin } \rightarrow \mathrm{Asp}^{-}+\mathrm{H}^{+} \\& 0.1-x \times x \\& \mathrm{Ka}=\frac{\left[\mathrm{Asp}^{-}\right]\left[\mathrm{H}^{+}\right]}{\text {(Aspirin) }} \\& =\frac{x^2}{0.1-x} \\& \text { Find out }[\mathrm{H}+]=\mathrm{x} \\& \mathrm{PH}=-\log _{10}\left[\mathrm{H}^{+}\right] \\& \log _{10}\left[\mathrm{H}^{+}\right]=2.24 \\& {\left[\mathrm{H}^{+}\right]=\text {antilog } 2.24} \\& =1.73 \times 10^{-2}=x \\&\end{aligned}$$[/tex]
[tex]$$\begin{aligned}& \text { Now Ka }=\frac{x^2}{0.1-x} \\& \mathrm{Ka}=\frac{1.73 \times 10^2}{0.1-0.0173} \\& \mathrm{Ka}=\frac{\left(\left(1.73 \times 10^{-2}\right)\right)^2}{0.0627} \\& \mathrm{Ka}=\frac{2.9929 \times 10^{-1}}{0.01827} \\& \mathrm{Ka}=36.32 \times 10^{-4}=3.63 \times 10^{-3} \\& \text { Pka }=-\log _{10} \mathrm{ka} \\& =-\log \left(3.63 \times 10^{-3}\right) \\& =2.44\end{aligned}$$[/tex]
Thus, pKa of aspirin is 2.24
To learn more about half-ionized
https://brainly.com/question/29805108
#SPJ4
in a reaction, the concentration of a reactant was increased from 2.5 m to 7.5 m and the rate was observed to change from 1.30e-2 m/s to 1.17e-1 m/s. what is the order of the reactant?
In a reaction, the concentration of a reactant was increased from 2.5 m to 7.5 m and the rate was observed to change from 1.30e-2 m/s to 1.17e-1 m/s. 2 is the order of the reactant.
The rate law of a chemical reaction expresses the dependence of the reaction rate on the concentrations of the reactants. For a simple reaction involving only one reactant, the rate law has the form:[tex]rate = k[A]^n[/tex]
In this case, we have two sets of initial concentrations and rates:
Experiment 1:
[A] = 2.5 M
rate = 1.30 × [tex]10^-2 M/s[/tex]
Experiment 2:
[A] = 7.5 M
rate = 1.17 × [tex]10^-1 M/s[/tex]
Substituting the values from the experiments, we get:
[tex]1.17 × 10^-1 M/s / 1.30 × 10^-2 M/s = (7.5 M / 2.5 M)^n[/tex]
[tex]9 = 3^n[/tex]
Taking the logarithm of both sides, we get:
n = log(9) / log(3) = 2
Therefore, the order of the reaction with respect to the reactant is 2.
Learn more about concentration of a reactant here:
https://brainly.com/question/492238
#SPJ4
consider the reaction of cs2 with cl2 to form ccl4 and scl2. if 5.82 g cl2 is reacted with excess cs2 and 2.11 g of ccl4 is ultimately isolated, what is the percent yield for the reaction?
The percent yield for the given reaction is 70.37% that is calculated in the below explanation.
The chemical equation can be depicted as follows-
CS2+4 Cl2----> CCl4 +2 SCl2
In the given reaction, the excess reagent is CS2 and the limiting reagent is 6.47 g.
Theoretical yield can be calculated as follows-
6.47 g Cl2 * 1 mol Cl2 / 71 g Cl2 * 1 mol CCl4 /4 mole Cl2 * 154 g CCl4 / 1 mole CCl4
=6.47g * 155 g /71*4 g =3.51 g
Percent yield is the ratio of actual yield to the theoretical yield multiplied by 100.
Percent yield=actual yield/theoretical yield
=2.74/3.51 * 100
=70.37%
To learn more about percent yield check the link below:
https://brainly.com/question/8638404
#SPJ4
A 0. 674M cobalt (II) chloride (CoCl2) solution is prepared with a total volume of 0. 0750L. The molecular weight of CoCl2 is 128. 9 g/mol. What mass of CoCl2 in grams is needed for this solution?
A 0. 674M cobalt (II) chloride (CoCl₂) solution is prepared with a total volume of 0. 0750L. The molecular weight of CoCl₂ is 128. 9 g/mol. 6.55 g of CoCl₂ in grams is needed for this solution
Given that
A 0. 674M cobalt (II) chloride (CoCl₂) solution is prepared with a total volume of 0. 0750L.
And the molecular weight of CoCl₂ is 128. 9 g/mol. The mass of CoCl₂ in the solution is 6.55 grams.
Calculation of Mass of Cobalt (II) Chloride in SolutionTo determine the mass of cobalt (II) chloride (CoCl₂) present in a 0.0750 liter solution with a concentration of 0.674 M, a few calculations must be performed.
Firstly, the moles of CoCl₂ can be found by multiplying the concentration by the volume. The concentration of 0.674 M means there are 0.674 moles per liter, so for the 0.0750 liter solution, there are
0.674 moles × 0.0750 L
= 0.0505 moles of CoCl₂.
Secondly, the molecular weight of CoCl₂ is 128.9 g/mol, which can be used to find the mass in grams by multiplying the moles of CoCl₂ by the molecular weight.
The final calculation is
0.0505 moles × 128.9 g/mol
= 6.55 g,
Meaning that the mass of CoCl₂ in the solution is 6.55 grams.
To know more about the mass of solute in solution, visit: https://brainly.com/question/16428405
#SPJ4
describe the relationship between the strength of the attractions between particles and the number of particles you expect to be in the gas phase at a given temperature
The strength of the intermolecular attractions between particles in a substance affects the behavior of that substance, including its state, as well as its physical and chemical properties. In general, the strength of the intermolecular attractions is proportional to the boiling point of the substance, with stronger intermolecular attractions resulting in higher boiling points.
The number of particles in the gas phase depends on the temperature, pressure, and volume of the gas, and is proportional to the number of particles with enough thermal energy to escape the intermolecular attractions holding them in the liquid or solid phase.
The strength of the intermolecular attractions affects the amount of thermal energy required to escape these attractions and enter the gas phase, and therefore affects the number of particles in the gas phase at a given temperature.
In general, substances with weaker intermolecular attractions will have more particles in the gas phase at a given temperature, compared to substances with stronger intermolecular attractions. This is because the weaker attractions require less thermal energy to overcome, allowing more particles to enter the gas phase.
What is the strength of attraction between particles in a gas?
Weak compared to a solid or liquid - the gas particles are moving around at a speed with a large amount of kinetic energy.
Why is the force of attraction between gas particles weak?
The molecules in gases are really spread out, full of energy, and constantly moving around in random ways. Hence, light gas does not have the force of attraction between particles of matter.
To know more about intermolecular attraction in gases:
https://brainly.com/question/29666177
#SPJ4