Answer:at night.
Explanation:
What is the lowest acceptable overvoltage category rating for an ammeter that will be used to test outdoor conductors
CAT IV is the lowest acceptable overvoltage category rating for an ammeter.
What is CAT IV rating?According to IEC 1010 and UL61010-1 standards, the overvoltage installation categories for low voltage systems of less than 1000 Volts test equipment are described by the CAT III & IV ratings. This describes a component's capacity to withstand transient or impulsive voltage. Our voltage indicators meet the necessary standards to be utilized as permanently mounted test equipment for fixed installations such switchgear, MCCs, bus and feeder in industrial plants, and low voltage connections to utility power.
A component can be positioned or utilized further downstream from the voltage source the lower the number, which also indicates how much less impulse it can withstand. Installation at the origin or at the utility level falls under CAT IV, the highest classification. Our products have a 600V at CAT IV.
Learn more about ammeter here:
https://brainly.com/question/13162074
#SPJ4
A proud deep-sea fisherman hangs a 69.5-kg fish from an ideal spring having negligible mass. The fish stretches the spring 0.130 m. (a) Find the force constant of the spring.
Force constant = k = 6811 N/m
Given:
mass = m = 69.5 kg
L(initial) = ideal spring length = 12 cm= 0.120 m
L(final) = final spring length = 13 cm= 0.130 m
Two forces acting on the object is k*x and mg
so,
kx-mg=0
kx = mg
k = mg/x
We know that x= displacement = L(final)- L(initial)
0.130-0.120=0.10
k= 69.5×9.8/0.10
k =6811 N/m
To learn more about force constant of spring visit:
https://brainly.com/question/20785296
#SPJ4
A total electric charge of 4.00 nC is distributed uniformly over the surface of a metal sphere with a radius of 26.0 cm. The potential is zero at a point at infinity.
for what we can get from our side then we will see if they are being made in a letter or something which is leading enormous growth in cities with brick and its own way that it will not on the market and its not a good life for us to stay in and
A person stands on the ground with a slingshot and tries to hit a high limb on a nearby tree. The limb is 18.3 feet above the ground. What is the minimum initial velocity in meters/second of a rock leaving the slingshot at 6 feet above the ground that would be able to reach the limb
The minimum initial velocity of the rock is V = 8.56 m/sec.
What is Conservation of Energy?According to the rule of conservation of energy, energy can only be transformed from one form of energy to another and cannot be created or destroyed. This indicates that unless energy is added from the outside, a system always has the same quantity of energy.
Calculate the rock's minimal initial velocity in meters/second as it exits the slingshot at a distance of 6 feet [tex]$\left(h_{2}=6\right.ft.)[/tex] above the ground.
Using the provided information, the net height of the limb is calculated as shown below.
[tex]$$h &=h_{1}-h_{2}$$[/tex]
h = 18.3 - 6
h = 12.3
Now, using the conservation of energy the minimum initial velocity of the rock is computed as shown below,
Kinetic energy of the rock = Potential energy the rock
[tex]$$\begin{aligned}\frac{1}{2} m V^{2} &=m g h \\\frac{1}{2} V^{2} &=g h \\\frac{1}{2} V^{2} &=\left(32.1 \mathrm{ft} / \mathrm{s}^{2}\right)(12.3 \text { feet }) \\V &=\sqrt{2\left(32.1 \mathrm{ft} / \mathrm{s}^{2}\right)(12.3 \mathrm{feet})}\end{aligned}$$[/tex]
V = 28.10 [tex]\frac{ft}{s}[/tex].
The minimal initial velocity in meter/second is 8.56.
Therefore, the minimum initial velocity of the rock is 8.56 m/sec
To know more about conservation of energy visit:
https://brainly.com/question/18924822
#SPJ4
convert 14 mg to kg ....
14mg = 14 × 10^-3 g
= 14 × 10^-3 / 10^3 kg
= 14 × 10^-6 kg
= 0.014 kg
☆...hope this helps...☆
_♡_mashi_♡_
Answer:
0.000014 kg
Explanation:
A certain frictionless simple pendulum having a length l and mass m swings with period t. If both l and m are doubled, what is the new period?.
If l and m both are doubled then the period becomes √2*T
what is a simple pendulum?
It is the one which can be considered to be a point mass suspended from a string or rod of negligible mass.
A pendulum is a weight suspended from a pivot so that it can swing freely.
Here,
A certain frictionless simple pendulum having a length l and mass m
mass of pendulum = m
length of the pendulum = l
The period of simple pendulum is:
[tex]T = 2\pi \sqrt{\frac{l}{g} }[/tex]
Where k is the constant.
Now the length and mass are doubled,
m' = 2m
l' = 2l
[tex]T' = 2\pi \sqrt{\frac{2l}{g} }[/tex]
[tex]T' = \sqrt{2}* 2\pi \sqrt{\frac{l}{g} }[/tex]
[tex]T' = \sqrt{2} * T[/tex]
Hence,
If l and m both are doubled then the period becomes √2*T
Learn more about Simple Harmonic Motion here:
https://brainly.com/question/17315536
#SPJ4
The kinetic energy of a 23.2-g object moving at a speed of 81.9 km/hr is ________ j.
Taking into account the definition of kinetic energy, the kinetic energy of a 23.2 g object moving at a speed of 81.9 km/hr is 6.004 J.
Kinetic energyKinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.
This is, kinetic energy is defined as the amount of work necessary to accelerate a body of a certain mass and in a position of rest, until it reaches a certain speed. Once this point is reached, the amount of accumulated kinetic energy will remain the same unless there is a change in speed or the body returns to its state of rest by applying a force.
Kinetic energy is represented by the following formula:
Ec = ½ mv²
Where:
Ec is kinetic energy, which is measured in Joules (J).m is mass measured in kilograms (kg). v is velocity measured in meters over seconds (m/s).Kinetic energy in this caseIn this case, you know:
Ec= ?m= 23.2 g= 0.0232 kg (being 1 g= 0.001 kg)v= 81.9 km/h= 22.75 m/s (being 1 km/h= 0.277778 m/s)Replacing in the definition of kinetic energy:
Ec = ½ 0.0232 g×(22.75 m/s)²
Solving:
Ec= 6.004 J
Finally, the kinetic energy of a 23.2 g object moving at a speed of 81.9 km/hr is 6.004 J.
Leant more about kinetic energy:
https://brainly.com/question/25959744
Four identical lab carts each have a mass of 200 kg. different masses are added to the carts and the velocities are measured. all carts move to the right. an illustration with four carts labeled cart a, cart b, cart c, and cart d. cart b has a 20 kilogram mass in it, cart c has a 40 kilogram mass in it, and cart d has a 60 kilogram mass in it. there are labels under each cart. under cart a is v = 4.8 meters per second, under cart b is v = 4.0meters per second, under cart c is v = 3.8 meters per second, and under cart d is v = 3.5 meters per second. which cart has the greatest momentum? cart a cart b cart c cart d
Cart A has the greatest momentum.
What is momentum?The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum because its mass is in motion. Mass and velocity are two factors that affect momentum. According to an equation, an object's momentum is determined by multiplying its mass by its velocity.
p = mv
p = momentum
m = mass
v = velocity
Calculation:Cart A
m₁ = 200 kg
v₁ = 4.8 m/s
p₁ = 200 × 4.8
p₁ = 960 kg-m/s
Cart B
m₂ = 200 + 20 = 220 kg
v₂ = 4 m/s
p₂ = 220 × 4
p₂ = 880 kg-m/s
Cart C
m₃ = 200 + 40 = 240 kg
v₃ = 3.8 m/s
p₃ = 240 × 3.8
p₃ = 912 m/s
Cart D
m₄ = 200 + 60 = 260 kg
v₄ = 3.5 m/s
p₄ = 260 × 3.5
p₄ = 910 kg-m/s
Hence concluded, cart A has the greatest momentum.
Learn more about momentum here:
https://brainly.com/question/24030570
#SPJ4
If the lens in a person's eye is too highly curved, this person is suffering from?
If the lens in a person's eye is too highly curved, this person is suffering from: nearsightedness.
lens is a piece of transparent material (such as glass) that has two opposite regular surfaces either both curved or one curved and the other plane and that is used either singly or combined in an optical instrument for forming an image by focusing rays of light.
The lens is used to form an image of an object by focusing rays of light from the object.
Various types of lenses are :
Concave lens.Convex lens.Plano lens.learn more about lens here
https://brainly.com/question/9757866
#SPJ4
Calculate the “index of refraction” of a medium where the speed of light through it is 1.24 x 108 m/s. Use the GRASS method, write your solution on paper and insert an image of it below
The index of refraction of the medium where the speed of light is 1.24× 10⁸m/s, is 2.42.
To find the answer, we need to know about the relation between the refractive index and velocity of light.
What's the the expression of refractive index of a medium in term of velocity of light?Refractive index of any medium (n)= C/VC= speed of light in vaccum which is 3×10⁸ m/s , V = velocity of light in the mediumWhat's the refractive index of a medium in which speed of light is 1.24 x 10⁸ m/s?Refractive index of the medium =
3×10⁸/1.24 x 10⁸
= 2.42
Thus, we can conclude that the refractive index of the medium is 2.42.
Learn more about the refractive index here:
brainly.com/question/83184
#SPJ1
A convex lens of focal length 25 cm is in contact with a concave lens of focal length 50 cm. The equivalent focal length of this combination-lenses should be Group of answer choices
The equivalent focal length of this combination-lenses should be +50 cm.
Given:
Focal length of convex lens, f₁ = +25 cm
Focal length of concave lens, f₂ = -50 cm
Calculation:
We know that the power of a lens is given as:
P = 1 / f
where, f is the focal length of lens
Now, the power of convex lens can be calculated as:
P₁ = 1/f₁
= 1/(25×10⁻² m)
= 100/25
= +4 D
Similarly, the power of concave lens can be calculated as:
P₂ = 1/f₂
= (1/-50×10⁻² m)
= -100/50
= -2 D
Thus, the power of the combined lenses can be calculated as:
P₍₁₊₂₎ = P₁ + P₂
= +4 D - 2 D
= +2 D
Now, the combined focal length of the lens can be calculated as:
f₍₁₊₂₎ = 1 / P₍₁₊₂₎
= 100 / 2 D
= +50 cm
Therefore, the equivalent focal length of this combination-lenses will be +50 cm.
Learn more about mirrors and lenses here:
https://brainly.com/question/3209252
#SPJ4
Two worlds in the outer solar system that seem remarkably similar to each other are:
Two worlds in the outer solar system that seem remarkably similar to each other are: Triton and Pluto
The outer solar system comprises the next four planets and everything beyond the planet Neptune but within the gravitational pull of the Sun. The Kuiper Belt and the Oort Cloud are also parts of the outer region.
Triton is only slightly larger than Pluto. Both worlds have similar surface materials, such as nitrogen, methane and carbon monoxide. Their diameters, masses and densities are also similar. Both Triton and Pluto may also have originated within the Kuiper Belt. Triton is thought to be originally a Kuiper Belt Object that was captured by Neptune's gravity.
Because Triton and Charon-Pluto are both from the Kuiper belt they are both made of similar materials such as nitrogen, methane, carbon dioxide and water ice. Both have large cores that are made primarily of rock with mantles of water ice and crusts made of frozen nitrogen. Neither of them have a magnetic field.
To learn more about Kuiper Belt here
https://brainly.com/question/25583240?referrer=searchResults
#SPJ4
A fireworks shell is accelerated from rest to a velocity of 60.0 m/s over a distance of 0.200 m. How long did the acceleration last
The acceleration lasted for 0.007s.
To find the answer, we need to know about the Newton's equation of motion.
What's the Newton's equation of motion that relates initial velocity, final velocity, acceleration, time and distance?Newton's equations are
V²-U²= 2aSV²-U²= 2aSV= U+atV= final velocity, U= initial velocity, a= acceleration, t= time and S = distance
What's the acceleration, if the fireshell is accelerated from rest to a velocity of 60.0 m/s over a distance of 0.200 m?Here, U= 0m/s, V= 60.0 m/s, S= 0.200 m60²-0= 2a×0.2= 0.4a
a= 3600/0.4= 9000m/s²What's the time taken by the fireshell to achieve 60m/s with 9000m/s² acceleration from rest?Here, U= 0m/s, V = 60.0 m/s, a= 9000m/s²60= 0+9000tt= 60/9000= 0.007 sThus, we can conclude that the acceleration of the fireshell lasted for 0.007s.
Learn more about the acceleration here:
brainly.com/question/460763
#SPJ4
Which element of a valid contract is established by getting the signatures of all parties?
The element of a valid contract which is established by getting the signatures of all parties is mutual agreement
What is an element of a valid contract?An element of a valid contract simply refers to that promise made between two or more parties that which allow the courts to make judgement.
Some elements of valid contract are:
OfferAcceptanceConsiderationIntention to create legal relationCertainty and capacity.So therefore, the element of a valid contract which is established by getting the signatures of all parties is mutual agreement
Learn more about elements of a valid contract:
https://brainly.com/question/15101023
#SPJ1
A crate with a mass of 44.0 kg is pushed with a horizontal force of 150 N. The crate moves at a constant speed across a level, rough floor a distance of 5.50 m.
Work done will be 825 N*m
Given:
mass of crate = 44.0 kg
horizontal force = 150 N
distance moved by crate = 5.50 m
To Find:
Work done
Solution: Work is done whenever a force moves something over a distance. You can calculate the energy transferred, or work done, by multiplying the force by the distance moved in the direction of the force.
First we want to find the work, it is given by the force applied times the distance moved, so the work is just:
W = Force x displacement
W = 150N*5.50m
W = 825 N*m
So, work done will be 825 N*m
Learn more about Work done here:
https://brainly.com/question/18762601
#SPJ4
Which starting material is the limiting reagent in this procedure? which reagent is used in excess? how great is the molar excess (how many times greater)?
The limiting reagent in this procedure is the substance that is completely used in the reaction. The substance which is not completely used is called excess.
The beginning cloth in a chemical reaction is known as the reactant. each chemical response could have one or more reactants.
In a chemical response limiting reagent is the reactant this is fed on first and prevents any similar reaction from happening. the quantity of product shaped during the response is decided by means of the limiting reagent. as an example, allow us to recall the response of solution and chlorine
Materials used during the manufacture of the lively substance (e.g., tradition media, growth factors, and so on) and that are not meant to form a part of the active substance shall be taken into consideration as raw substances. cloth forming a critical part of the lively materials element shall be considered as the beginning substance.
Learn more about limiting reagents here:-https://brainly.com/question/26905271
#SPJ4
It's a duty of the AHJ to
A. make revisions to the Code.
B. interpret NEC rules.
C. review installation designs and determine if they fall under Code jurisdiction
D. ensure the suitability of installations for future expansion.
The duty of the AHJ is to: (C). review installation designs and determine if they fall under Code jurisdiction
Meaning of AHJAHJ can be defined as that means Authority Having Jurisdiction
AHJ can be defined as an organization, office, or individual that are responsible for the issuance of permits, enforcing the requirements of a code or standard and approving materials or a procedure.
In conclusion, The role of the AHJ are outlined in the paragraph above.
Learn more about Jurisdiction: https://brainly.com/question/10377896
#SPJ1
Which type of galaxy is likely to contain only o-spectral type stars?
If we wanted to improve the efficiency of technology to reduce electrical power consumption. The sectors we would choose are?
If the efficiency of technology was to be improved in other to reduce electrical power consumption, the sectors which would be chosen is referred to as residential and commercial.
What is Technology?This is defined as the application of science to the practical aims and activities of human life. Power on the hand is defined as the amount of energy which is transferred per unit time and the S.I unit is referred to as Watts.
It can be inferred that electric power consumption is most abundant in residential and commercial sectors due to the number of appliances and hours which are present and used in this area.
It is therefore appropriate to focus on these two sectors so as to achieve the aim of an efficient technology in reduction of electrical power consumption.
Read more about Electric power here https://brainly.com/question/1125269
#SPJ1
Describe 4 criteria you would use to compare energy sources.
The 4 criteria you would use to compare energy sources are;
1. It is necessary to assess whether or not they are renewable.
2. It is necessary to be aware of the amount of energy that is provided per energy source unit.
3. You have to be aware of how risky it is to utilize different types of energy sources.
4. It is necessary to be aware of the effects that various types of energy sources have on the surrounding environment.
This is further explained below.
What are energy sources.?Generally, A source from which energy that may be used can be collected or recovered, either directly or by means of a process of conversion or transformation
In conclusion, 1. You must decide if they are renewable or not.
2. You must be aware of the amount of energy provided per unit of energy source.
3. You must be aware of the safety of using various energy sources.
4. Need to understand how various energy sources affect the environment.
Read more about energy sources.
https://brainly.com/question/10841575
#SPJ1
John is talking to his friend about painting a fence. He states that if he uses a roller brush he will cover the fence faster than if he uses a bristle brush. This is an example of a a. Law b. Belief c. Theory d. Hypothesis
Answer:
b
Explanation:
In an MRI, the magnetic field B is generated by a solenoid of length 100 cm and diameter of 90 cm. The B field generated is one (1) T. The largest current the wire can carry is 76 A. _____ turns of solenoid is needed.
Given,
L=100 cm=0.1 m
D=90 cm
B=1 T
I=76 A
B*L=μnI
1 *0.1= 4π*[tex]10^{-7}[/tex]*n*76
n= 1047
So the turns of solenoid needed is 1047.
SolenoidA solenoid with infinite length but finite diameter is said to be infinite. In this abstraction, the solenoid is frequently seen as a cylindrical sheet of conductive material. The term "continuous" refers to the fact that the solenoid is not made up of discrete coils with finite widths but rather numerous infinitely thin coils joined together without any gaps. An indefinitely long solenoid has a homogenous magnetic field inside of it that is independent of the cross-sectional area or the distance from the axis. This is a long enough derivation of the magnetic flux density surrounding a solenoid that fringe effects may be disregarded.
In an MRI, the magnetic field B is generated by a solenoid of length 100 cm and diameter of 90 cm. The B field generated is one (1) T. The largest current the wire can carry is 76 A. 1047 turns of solenoid is needed.
Learn more about solenoid here:
https://brainly.com/question/15504705
#SPJ4
A see-saw is balanced on its
midpoint. A 22.4 kg kid sits on the left, 1.75 m from the axis. A second kid sits on the other side, 1.22 m from the axis. What is the mass of the second kid?
Answer:
W1 L1 = W2 L2 equation for balancing torques
M1 g L1 = M2 L2 g
Or M2 = M1 * 1.75 / 1.22 = 1.43 M1 = 32.1 kg
The ___________ is a plane perpendicular to the optic axis through the focal point.
The focal plane is a plane perpendicular to the optic axis through the focal point.
What is focal plane?
The focal plane is the distance between your camera lens and the perfect point of focus in an image. This area is located a certain distance in front of your camera lens, and spans horizontally, left to right across your frame.What is focal plane and lens?
The focal plane is the one in which each focus is most likely to be located. The focal plane houses the lens' focus. The primary axis of the lens and the focus plane are perpendicular. The focal length of the lens determines how far the focal plane is from the lens.Learn more about focal plane
brainly.com/question/3081731
#SPJ4
Which type of fire suppression system is designed to work in areas where electrical equipment is used and contains pressurized air?
In a dry pipe sprinkler system, pressurized air or nitrogen, rather than water, is used to fill the pipes. This air maintains the closed position of a remote valve, also referred to as a dry pipe valve.
The dry-pipe valve, which is situated in a hot area, keeps water from flowing into the pipe until a fire triggers the operation of one or more sprayer. When this occurs, the dry pipe valve releases and the air leaves. After that, water enters the pipe and pours onto the flames through open sprinklers.
Learn more about the Fire suppression system: https://brainly.com/question/14727381
#SPJ1
Rank in order, from largest to smallest, the magnitudes of the momentum p1x through p5x of the objects presented in (Figure 1). Rank the magnitudes of the momentum from largest to smallest. To rank items as equivalent, overlap them.
The decreasing order of the momenta are b>a=d=e>c.
What is Momentum?Momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both magnitude and direction.According to Isaac Newton's second equation of motion, the force acting on the particle equals the time rate of change of momentum.According to Newton's second law, if a particle is subjected to a constant force for a specific amount of time, the result of the force and time (referred to as the impulse) is equal to the change in momentum. On the other hand, a particle's momentum represents the length of time needed for a consistent force to bring it to rest.Solution: The momentum of all the options are mentioned below according to the formula:
a. p = 20 × 1 = 20gm/s
b. p = 20 × 2 = 40gm/s
c. p =10 × 1 = 10gm/s
d. p = 10 × 2 = 20 gm/s
e. p =200 × 0.1 = 20gm/s
Know more about momentum https://brainly.com/question/904448
#SPJ4
Question:
I hope you are trying to ask the question below:
Rank in order, from largest to smallest, the momenta a to e of the objects
a. 20 g & 1 m/s
b. 20 g & 2 m/s
c. 10 g & 1 m/s
d. 10 g & 2 m/s
e. 200 g & 0.1 m/s
________ occurs when a person is holding an object that is directly hit or splashed by lightning.
Contact injury happens when a person is holding an object that is directly hit or splashed by lightning.
To find answer, we need to know more about the lightning and injuries.
What are the injuries caused by lightning?The phenomenon of natural electrical discharge happens in a short time with a bright flash is called lightning.It carries a huge amount of energy.The injuries caused by lightning can be classified as Direct strikes, Side splash and the Contact injury.Direct injuries happens when a person directly hit by lightning.Side splash occurs when a current splashes from a nearby object.Contact injury happens when a person touching an object that is hit by lightning.Thus, we can conclude that, contact injury occurs when a person is holding an object that is directly hit or splashed by lightning.
Learn more about lightning and injuries here:
https://brainly.com/question/28055828
#SPJ1
When someone is holding something that has been struck or splashed by lightning, contact damage occurs.
We need additional information concerning lightning and injuries in order to identify the solution.
What types of injuries are brought on by lightning?Lightning is the name for a natural electrical discharge that occurs quickly and with a dazzling flash.It has a tremendous amount of energy.Lightning-related injuries can be divided into three categories: direct strikes, side splashes, and contact injuries.When someone is struck by lightning directly, they can get direct injury.When a current splashes from a neighboring object, it is called a side splash.When someone touches a lightning-hit object, contact harm results.In light of this, we can say that contact injuries happen when a person is holding an object that has been struck by lightning or splashed by it.
Learn more about the lightning and harm here:
https://brainly.com/question/28055828
#SPJ1
deidre walked her dog a distance of 95 meters to the north. the walk took 45 seconds. what was their velocity
Velocity of Deidre and her dog is 2.11m/s.
What is velocity?Velocity is the rate of change of position of an object in a particular frame of reference Mathematically, velocity of an object = Displacement of the object/time taken What is velocity of Deidre and her dog ?The distance covered by Deidre and her dog is 95 meter towards north.The time taken to cover the distance is 45 second.So velocity of Deidre and her dog =95/45=2.11m/s
Thus , we can conclude that the velocity of Deidre and her dog is 2.11 m/s towards north .
Learn more about velocity here :
brainly.com/question/80295?source=archive
#SPJ1
How much the aproximate number of atoms in bacteria.assume that average mass of an atom in bacteria is ten times the mass of hydrogen atom
Although centuries ago, astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is:
Astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is as a binary star system.
What is the binary star system about?A binary star system is known to be one where one star is known to be called a white dwarf and there is a mass that is said to be transferred to it
A binary star is known to be a kind of a system that is composed of two stars that are known to be gravitationally held together to and in orbit near each other.
Note that Binary stars in the night sky are ones that are often seen as a single object and thus Astronomers thought that a nova was a new star, appearing for the first time in the heavens, today we know that it is as a binary star system.
Learn more about astronomers from
https://brainly.com/question/1141458
#SPJ1