Atomic interactions between their subatomic particles cause bonds between them to form and break during chemical processes. The protons and neutrons that make up the positively charged nucleus of an atom are surrounded by negatively charged electrons.
The quantity and configuration of an atom's electrons determines its chemical characteristics. The electrons participate in the production or breaking of bonds during chemical processes. Two or more atoms share or exchange electrons to create a more stable electron configuration in a chemical bond. The electron configuration of the atoms involved is altered when a bond is broken because electrons are either shared or transferred to another atom.Chemical bonds are formed and broken by interactions between electrons and the protons and neutrons in the nuclei of the atoms. For instance, in a covalent bond, two atoms share a pair of electrons that are drawn to their mutually attractive positively charged nucleus.
learn more about chemical processes here:
https://brainly.com/question/21182404
#SPJ4
Duralumin is an alloy of aluminum (95%) and copper (5%). Could the technique used in this laboratory experiment to determine the percent copper also be used to determine the duralumin in a sample?
Yes, the technique used in this laboratory experiment to determine the percent copper can also be used to determine the duralumin in a sample. The same steps can be followed to measure the amount of aluminum and copper in the sample, then the percentages of each can be calculated.
Step 1: Measure out a sample of the duralumin.
Step 2: Heat the sample until it is completely melted.
Step 3: Separate the aluminum and copper in the melted sample.
Step 4: Weigh each of the separated elements, aluminum, and copper.
Step 5: Calculate the percentage of each element by dividing the weight of each element by the total weight of the sample.
Step 6: Add the percentages of aluminum and copper to determine the total percentage of duralumin in the sample.
to know more about alloy refer here:
https://brainly.com/question/30432755#
#SPJ11
Yes, the same technique used to determine the percent copper in a sample could be used to determine the amount of duralumin in a sample. Duralumin is an alloy of aluminum (95%) and copper (5%), so the same techniques used to measure the copper can also be used to measure the amount of duralumin.
Duralumin is an alloy of aluminum and copper. The technique used in this laboratory experiment can also be used to determine the duralumin in a sample.An alloy is a mixture of two or more metals that are typically combined to produce a metal that has more advantageous features than any single element.
For example, an alloy can have greater strength or be more resistant to corrosion than its constituent metals.In Duralumin, copper makes up only 5%, whereas aluminum makes up 95%. The technique used in this laboratory experiment can also be used to determine the duralumin in a sample.
Learn more about alloy here:
brainly.com/question/30432755
#SMJ11
F. Recognize that there are more than 100 elements and some have
similar properties as shown on the Periodic Table of Elements.
Type of Element Metals
Properties
Examples:
Nonmetals
Metalloids
Helgitula
Answer:
Metals are malleable, and ductile, have a shiny luster, form metallic bonds, and are superb conductors (to name some properties).
Ex. Copper
Malleable is the ability to be pounded into thin sheets.
Ductile is the ability to be drawn into a thin wire.
Metallic is metal-to-metal bonding.
Nonmetals, however, are not malleable, or ductile, are not good conductors and form covalent and ionic bonds.
Ex. Carbon
Covalent is nonmetal-to-nonmetal bonding.
Ionic is metal-to-nonmetal bonding.
Metalloids
Semiconductors, and are basically metal and nonmetal properties combined. I.E. Has a metallic luster but is brittle (not malleable).
Ex. Sillicon
what volume of 0.0100 m mno4 - is needed to titrate a solution containing 0.355 g of sodium oxalate?
To titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.
What is Titration?Titration is a technique used in analytical chemistry to determine the concentration of a specific analyte. The method involves the gradual addition of a standard solution to a sample containing the unknown analyte until the chemical reaction between the two is complete. The concentration of the unknown analyte can be calculated once this happens.
The balanced equation for the reaction between Na₂C₂O₄ and KMnO₄ is shown below:
5Na₂C₂O₄ + 2KMnO₄ + 8H₂SO₄ → 2MnSO₄ + 10CO₂ + 5Na₂SO₄ + 8H₂O
To titrate the given sodium oxalate solution, the volume of KMnO₄ needed must be determined. The molar mass of Na₂C₂O₄ is 134.00 g/mol.
Mass of Na₂C₂O₄ = 0.355 g
Moles of Na₂C₂O₄ = (0.355 g)/(134.00 g/mol) = 0.00265 mol
From the balanced equation, it can be seen that 2 moles of KMnO₄ are required to react with 5 moles of Na₂C₂O₄. As a result, the number of moles of KMnO₄ needed can be calculated.
Moles of KMnO₄ = (2/5) × 0.00265 mol = 0.00106 mol
The volume of 0.0100 M KMnO₄ needed can now be determined using the molarity equation.
Molarity (M) = moles (n) / volume (V)
n = M × V
V = n / M = 0.00106 mol / 0.0100 M = 0.106 L = 0.0234 L (to three significant figures)
Therefore, to titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.
Learn more about Titration here: https://brainly.com/question/186765
#SPJ11
identify the beaker that best represents a saturated solution. assume all the solutions are at the same temperature.
The beaker that best represents a saturated solution is the one in which the solution is at its maximum level of solubility, meaning it cannot dissolve any more solute at the same temperature.
Saturated solutions are solutions in which no more solute can dissolve in the solvent at the same temperature. A solution is a homogeneous mixture composed of a solvent and a solute.
The solvent is the major component of the solution, and the solute is the minor component. The solute dissolves in the solvent to create a homogeneous solution.
A solution is said to be saturated when it has the maximum amount of solute that can dissolve in it at the same temperature. If the temperature changes, the solubility of the solute will also change, and the solution will become unsaturated or supersaturated.
Learn more about saturated https://brainly.com/question/388072
#SPJ11
Suppose that an ethene molecule gains an additional electron to give the 2 C H-4 ion. Will the bond order of the carbon–carbon bond increase or decrease? Explain.
When an ethene molecule receives an extra electron to form the 2 C H-4 ion, the bond order of the carbon–carbon bond will decrease.
What is bond order?
Bond order is a formal way to quantify the number of covalent bonds that exist between two atoms in chemistry. Bond order is defined as the difference in the number of electron pairs in bonding and antibonding molecular orbitals, as stated by Linus Pauling in his introduction.
Ethene is a hydrocarbon that has two carbon atoms joined by a double bond. In ethene, the carbon-carbon bond order is 2. A bond order is the number of chemical bonds connecting a pair of atoms. Double bonds have a bond order of 2, whereas single bonds have a bond order of 1. Bond order has a significant impact on the stability and strength of the bond.
As a result, a change in bond order can have a significant impact on a molecule's physical and chemical properties.The bond order in the 2 C H-4 ion is calculated using the molecular formula: 2 C + H + 1 e-. Carbon has six electrons in its outermost shell, while hydrogen has one.
To achieve stability, carbon requires four more electrons, and hydrogen requires one more electron. The electron received is utilized to form a new carbon-hydrogen bond. As a result, there will be three single carbon-carbon bonds, and the bond order will decrease from two to 1.5. The bond strength between the two carbon atoms is also reduced. Therefore, the carbon-carbon bond will decrease in bond order when an ethene molecule gains an extra electron to form the 2 C H-4 ion.
Learn more about bond order on:
https://brainly.com/question/9713842
#SPJ11
A 1.00 liter solution contains 0.32 M ammonia and 0.42 M ammonium iodide.
If 0.110 moles of calcium hydroxide are added to this system, indicate whether the following statements are true or false.
(Assume that the volume does not change upon the addition of calcium hydroxide.)
_______TrueFalse A. The number of moles of NH3 will increase.
_______TrueFalse B. The number of moles of NH4+ will increase.
_______TrueFalse C. The equilibrium concentration of H3O+ will decrease.
_______TrueFalse D. The pH will remain the same.
_______TrueFalse E. The ratio of [NH3] / [NH4+] will remain the same.
When 0.110 moles of calcium hydroxide are added to a solution containing 0.32 M ammonia and 0.42 M ammonium iodide, then statements B and C are True and statements A, D, and E are False.
A. The number of moles of NH₃ will increase. – False.
Adding calcium hydroxide to the system will not affect the amount of ammonia in the solution.
B. The number of moles of NH₄⁺ will increase. – True.
Adding calcium hydroxide will react with ammonium iodide, producing more ammonium ions in the solution.
C. The equilibrium concentration of H₃O⁺ will decrease. – True.
Adding calcium hydroxide will result in more hydroxide ions in the solution, thus decreasing the concentration of H₃O⁺.
D. The pH will remain the same. – False.
Adding calcium hydroxide will increase the number of hydroxide ions in the solution, thus increasing the pH.
E. The ratio of [NH₃]/[NH₄⁺] will remain the same. – False.
Adding calcium hydroxide will result in more ammonium ions in the solution, thus decreasing the ratio of [NH₃]/[NH₄⁺].
Therefore, statements B and C are true whereas statements A, D, and E are false.
To know more about ammonia, refer here:
https://brainly.com/question/14672082#
#SPJ11
citation chaining is a process for finding more articles that may be relevant for your research topic. which of these would be a good starting point for this process?
A good starting point for citation chaining would be a relevant and well-cited article or book that directly relates to your research the topic.
This article or book should have a comprehensive bibliography or the reference list that you can use to find additional sources. By examining the references cited in the original article, you can identify the other articles and books that are likely to be relevant to your research. Then, you can examine the references in those articles to find even more sources, continuing the process until you have a comprehensive set of relevant sources for your research.
To know more about citation chaining, here
brainly.com/question/29413043
#SPJ4
a molecular vibration absorbs radiation of wavelength . what frequency corresponds to that wavelength? round your answer to significant figures.
The frequency of the wavelength corresponding to the radiation is about 6.00 × 10¹³ Hz.
What is the frequency?The equation is given by:
c= λν
where, c is the speed of light, λ is the wavelength, and ν is the frequency. We can solve for ν by dividing both sides of the equation by λ:
ν= c/λ.
We can plug in the given wavelength and the speed of light to find the frequency.
Using the given wavelength, we have:
λ = 5.00 × 10⁻⁶ m.
Using the speed of light, c = 3.00 × 10⁸ m/s
Therefore, ν = c/λ = (3.00 × 10⁸ m/s) / (5.00 × 10⁻⁶ m) = 6.00 × 10¹³ Hz (rounded to two significant figures)
Therefore, the frequency corresponding to the given wavelength of molecular vibration is 6.00 × 10¹³ Hz.
Read more about the wavelength here:
https://brainly.com/question/10750459
#SPJ11
Consider the following system at equilibrium: N2 (g) + 3H2(g)--2NH3 (g) +92.94 kJ
Which changes cause it to shift to the right (products):
1) Increase in temperature 2) decrease in temperature 3)increase in volume 4) decrease in volume 5) remove some NH3 6) addsome NH3 7) remove some N2 8) add some N2
a) 1,4,6,7 b)2,3,5,8 c)1,6,8 d)1,3,5,7 e)2,4,5,8
The reaction above is exothermic, with the release of energy represented by the positive ΔH value.
Changes in temperature, pressure, and concentration can all cause the equilibrium to shift. In order to shift the reaction to the right-hand side (products), the following changes should be made: Increase in temperature: This reaction is exothermic, which means that increasing the temperature would cause the reaction to shift to the left and create more reactants. Lowering the temperature will cause the reaction to shift to the right and create more products. Decrease in volume: If the volume is decreased, the equilibrium shifts to the side with fewer moles of gas. Because the product side has fewer moles, the reaction will shift to the right, creating more products. Increase in NH3: Le Chatelier's principle indicates that when a substance is added to a system, the equilibrium will shift to decrease the concentration of that substance. As a result, the reaction will shift to the right and create more products. Removing N2: Because there are fewer reactants, removing N2 from the equation will cause the reaction to shift to the right and create more products.
Therefore, the answer is option (d) 1, 3, 5, 7: Increase in temperature, decrease in volume, remove some NH3 and remove some N2.
Learn more about equilibrium shifts at brainly.com/question/24188667
#SPJ11
Which one of the following salts, when 1 mole is dissolved in water, produces the solution with a pH closest to 7.00? A) NH4BR B) NaHSO4 C) NaF D) Ba O E) LiOH
When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The resulting solution is slightly basic, with a pH slightly greater than 7. The correct answer is C) NaF.
What are salts?Salts are ionic compounds formed from the reaction between an acid and a base. They are composed of positively charged ions (cations) and negatively charged ions (anions). Salts are typically solid at room temperature and have high melting and boiling points.
When dissolved in water, salts can dissociate into their component ions, allowing them to conduct electricity. Some common examples of salts include table salt (NaCl), baking soda (NaHCO3), and Epsom salt (MgSO4).
When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The F- ions react with water molecules to form HF and OH- ions. The resulting solution is slightly basic, with a pH slightly greater than 7.
Learn more about salts here https://brainly.com/question/13818836
#SPJ1
(a) Predict the identity of the precipitate that forms when solutions of BaCl2 and K2SO4 are mixed.
(b) Write the balanced chemical equation for the reaction.
(a) BaSO4 is insoluble and will precipitate from solution.
(b) BaCl2(aq) + K2SO4(aq) → BaSO4(s) + 2 KCl(aq)
(a) BaSO4 is insoluble and will precipitate from solution. (b) BaCl2(aq) + K2SO4(aq) → BaSO4(s) + 2 KCl(aq. The balanced chemical equation for the reaction is : BaCl2(aq) + K2SO4(aq) → BaSO4(s) + 2 KCl(aq)
The chemical reaction between BaCl2 and K2SO4 is a double displacement reaction in which barium sulfate (BaSO4) is produced as a precipitate. The balanced chemical equation for the reaction is:BaCl2(aq) + K2SO4(aq) → BaSO4(s) + 2 KCl(aq). Barium sulfate is formed as a result of this chemical equation where both the reactants were in aqueous state.
Barium sulfate (BaSO4) is insoluble in water, and it will form a white precipitate in the reaction mixture. The precipitate can be filtered out from the reaction mixture and dried to obtain solid BaSO4. The reaction is driven by the formation of a more stable compound (BaSO4) that precipitates out of solution as a solid.
Know more about double displacement here:
https://brainly.com/question/29307794
#SPJ11
Why electrons move from negative terminal of battery?
Answer:
Electrons are negatively charged, and so are attracted to the positive end of a battery and repelled by negative end.
Explanation:
The materials or compounds converted into new compounds in a chemical reaction are known as
The materials or compounds that are converted into new compounds in a chemical reaction are known as reactants.
Reactants are the starting materials for a chemical reaction and are consumed or used up during the reaction to form new products. In a chemical equation, reactants are written on the left-hand side of the arrow and products are written on the right-hand side. The reactants in a chemical reaction can be solids, liquids, or gases, and can be composed of elements or compounds. Understanding the reactants and products involved in a chemical reaction is important in predicting the outcome of a reaction and determining the stoichiometry, or the relative amounts of each substance involved.
To know more about reactants click here:
brainly.com/question/13005466
#SPJ4
reaction rate refers to how quickly or slowly the ____ disappear and the _____ appear. it is measured in terms of the ____ of the reactants.
Reaction rate refers to how quickly or slowly the reactants disappear and the products appear.
it is measured in terms of the change in concentration of the reactants. This change in concentration is affected by the reactants’ concentrations, temperature, pressure, and the presence of a catalyst.
The reaction rate can be described by the rate equation, which is determined experimentally by measuring the change in reactant or product concentration over time. The rate of the reaction is often represented by the rate constant, which is a measure of the speed of the reaction.
Different reaction mechanisms affect the rate constant, and thus the rate of the reaction. Increasing the concentration of reactants or temperature, or the presence of a catalyst, all increase the rate of the reaction, while decreasing the pressure can decrease the rate of the reaction.
To know more about Reaction rate click on below link:
https://brainly.com/question/30546888#
#SPJ11
How many moles of carbon monoxide would be needed to react with 100 g Fe₂O3?
Explanation:
Amount = Reacting mass ÷ Molecular MassReacting mass = 100gMolecular Mass = (55.845×2) + ( 16 ×3) = 111.69 + 48 = 159.69 g/ mol.: Amount= 100÷ 159.69 = 0.63moles.: 0.63 moles of carbon monoxide would be needed to react with 100g of Fe2O3
JOHN NEWLANDS REASON OF FAILURE
Answer: The law was applicable only to calcium. It could not include other elements beyond calcium. With the discovery of rare gases, it was the ninth element and not the eighth element having similar chemical properties.
Explanation:
YOUR WELCOME
the specific rotation of pure (-)-2-butanpl is -13.5. what % of a mixture of the two enantiomeric forms is the ( )-form from reaction
The percentage of the (+) enantiomer in the mixture is 55.6%
What are enantiomers?
Enantiomers are a pair of molecules that exist in two forms that are mirror images of one another but cannot be superimposed one upon the other.
Assuming that the two enantiomers are present in equal quantities (i.e., a racemic mixture), we can use the following equation to calculate the percentage of the (+)-enantiomer in the mixture:
% (+) = (observed specific rotation) / (specific rotation of pure enantiomer) x 100
In this case, we know that the specific rotation of pure (-)-2-butanol is -13.5. Let's assume that we have a racemic mixture of the two enantiomers, and we measure the observed specific rotation to be -7.5. Using the above equation, we get:
% (+) = (-7.5) / (-13.5) x 100 = 55.6%
Therefore, the percentage of the (+)-enantiomer in the mixture is 55.6%.
Learn more about enantiomers on:
https://brainly.com/question/29726886
#SPJ11
The following balanced chemical equation represents the burning of octane, one of the components of gasoline used to fuel engines.2C8H18(g) +25O2(g) --> 16CO2(g) + 18H2O(l)1. How many molecules of carbon dioxide are represented by the equation?2. How many moles of octante are represented by the equation?3. What is the simplified mole ratio of octane to carbon dioxide?4. What is the simplified mole ratio of oxygen to octane?
1. The balanced chemical equation shows that for every 2 molecules of octane burned, 16 molecules of carbon dioxide are produced. Therefore, the number of molecules of carbon dioxide represented by the equation is 16.
Solutions to rest of the questions2. The balanced chemical equation shows that for every 2 molecules of octane burned, 25 molecules of oxygen are required. Therefore, the ratio of octane to oxygen is 2:25. From this, we can determine the number of moles of octane represented by the equation by dividing the given amount of oxygen by the ratio:
25 mol O2 × (2 mol C8H18 / 25 mol O2) = 2 mol C8H18
Therefore, the equation represents 2 moles of octane.
3. The simplified mole ratio of octane to carbon dioxide can be determined by dividing both sides of the equation by the coefficient of octane (2):
2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)
Dividing by 2, we get:
C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)
The simplified mole ratio of octane to carbon dioxide is therefore 1:8.
4. The simplified mole ratio of oxygen to octane can be determined in the same way, by dividing both sides of the equation by the coefficient of octane:
2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)
Dividing by 2, we get:
C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)
The simplified mole ratio of oxygen to octane is therefore 12.5:1.
Learn more about octane here https://brainly.com/question/29657423
#SPJ1
Complete the synthesis by determining the set of reactions and the synthetic intermediate needed to convert the given alkyl halide to the primary amine. Drag the appropriate labels to their respective targets Hints NH HNNH2 1) HCrO 2) Hyo H2. Raney Ni H,NOH NaN3 excess NH NT trace acid DMF Br NH2
The synthetic intermediate required is [tex]HNNH_{2}[/tex]. The set of reactions required to convert the given alkyl halide to the primary amine is as follows; [tex]H_{2}[/tex], Raney Ni, then [tex]H_{2} 0[/tex], H+, heat, and finally Sn, HCl, and heat.
The synthesis needed to convert the given alkyl halide to the primary amine are as follows;Hydrogenation of the double bond, Hydrolysis of nitrile to primary amine and Reduction of nitro group to aniline. The synthetic intermediate needed is HNNH2.
The set of reactions for the synthesis is as follows;
1. Hydrogenation of the double bond is done using [tex]H_{2}[/tex], Raney Ni.
2. Hydrolysis of nitrile to primary amine is done using [tex]H_{2} 0[/tex], H+, heat.
3. Reduction of nitro group to aniline is done using Sn, HCl, and heat.
So, the set of reactions required to convert the given alkyl halide to the primary amine is as follows;[tex]H_{2}[/tex], Raney Ni, then [tex]H_{2} O[/tex], H+, heat, and finally Sn, HCl, and heat. The synthetic intermediate required is [tex]HNNH_{2}[/tex].
More on organic chemistry synthesis: https://brainly.com/question/14098748
#SPJ11
rank the relative rates of the alkyl halides in an sn1 reaction.H3C-1 CH3 CH3 CH₂ H₂C Fastest SN 1 reaction Slowest SN 1 reaction Answer Bank CH3 H3C. CH3 H3C. H₂C₂ CH3 CH3
The relative rates of alkyl halides from fastest sn 1 to slowest sn1 mechanism is CH3 H3C. CH3 H3C. H₂C₂ CH3 CH3.
Alkyl halides can go through one of two different sorts of significant reactions: substitution or elimination.
Nucleophilic Substitution reaction occurs when the halogen at the alpha-carbon is replaced by a nucleophile after the electrophilic alkyl halide forms a new bond with it.
The SN1 reaction mechanism proceeds step-by-step, starting with the formation of the carbocation through the elimination of the leaving group. The nucleophile then attacks the carbocation. Ultimately, the protonated nucleophile is deprotonated to produce the desired product.
Alkenes are formed by the E1 mechanism while substitution products are produced by the Sn1 process.
The rate law in an SN1 reaction is first order. In other words, the concentration of just one component—the alkyl halide—determines the reaction rate.
To know about mechanism
https://brainly.com/question/27921705
#SPJ4
For which of the following can we directly compare their Ksp values to determine their relative solubilities?
(A) Ag2CrO4 and AgBr
(B) Ag2SO4 and CaSO4
(C) PbCl2 and PbSO4
(D) ZnS and Agl
The option for which we can directly compare the Ksp values to determine their relative solubilities are Ag₂CrO₄ and AgBr. Thus, the correct option is A.
Relative solubilities can be directly compared with Ksp values to determine the relative solubilities of Ag₂CrO₄ and AgBr. Solubility Product Constant (Ksp) is the term which is used to describe the equilibrium constant that exists between a solid and its ions in a solution.
In addition to Ag₂CrO₄ and AgBr, the solubilities of the other given compounds cannot be determined using their Ksp values since they are not in the same class of compounds. Ksp can be defined as the product of the concentrations of its ions to a specific power, which is known as the solubility product. For every solute, the Ksp has a unique value. The Ksp is not reliant on the concentration of the solute.
Therefore, the correct option is A.
Learn more about Relative solubilities here:
https://brainly.com/question/26802361
#SPJ11
The motion of particles creates a heat energy. True or false
True. Thermal energy, which is quantified as heat, is the movement of particles inside a material. Particles exchange energy in the form of heat as they travel more quickly or collide with one another.
Hence, thermal energy may be produced by the movement of particles.
The movement of particles within a material results in the production of thermal energy, often known as heat energy. Kinetic energy, which occurs when particles travel more quickly, or potential energy, which occurs when particles vibrate more quickly, might cause this movement. As particles contact, heat is transferred from one particle to the next, and this energy transfer lasts until the substance reaches thermal equilibrium. The temperature and quantity of heat energy within the material increase with particle mobility. Understanding this concept is crucial for comprehending a variety of phenomena, such as heat transport, thermodynamics, and the behaviour of matter in different states.
learn more about Thermal energy here:
https://brainly.com/question/18989562
#SPJ4
Niacinamide (a.k.a. nicotinamide, and often referred to as vitamin B3. See Figure.) is a nitrogen containing organic molecule derived from niacin that makes its way into our metabolic pathways as coenzymes in the forms of NAD and NADP. It is also found in an acne treatment called Nicomide and some people take it as a nutritional supplement to combat high cholesterol. How many atoms of carbon are there in a 1317 mg dose of niacinamide? Enter your answer using scientific notation of the form 1.234e30 or 1.234e-30.
atoms of carbon
A 1317 mg dose of niacinamide, there are 3.27 x 10²² carbon atoms.
Niacinamide, also known as vitamin B3, is an organic molecule that is nitrogen-containing and derived from niacin. It gets into our metabolic pathways as coenzymes in the forms of NAD and NADP.
This substance is found in Nicomide, an acne treatment, and is used by some individuals as a nutritional supplement to treat high cholesterol.
The molar mass of niacinamide, the molecular formula of niacinamide, and Avogadro's number. Avogadro's number is 6.022 x 10²³, The molar mass of niacinamide is 123.11 g/mol.
The number of moles in 1.317 g of niacinamide using the formula: moles = mass / molar mass. moles = 1.317 g / 123.11 g/mol= 0.0107 moles. he number of atoms present in the niacinamide, we must use Avogadro's number.
The molecular formula for niacinamide is C₆H₆N₂O. There are 6 carbon atoms in this molecule because C₆H₆N₂O means there are 6 carbon atoms.
Multiply the number of moles by Avogadro's number to get the number of molecules, and then multiply that by the number of atoms in the molecule.
Thus, 0.0107 mol x 6.022 x 10²³ / mol x 6 atoms / molecule = 3.27 x 10²² carbon atoms. Therefore, in a 1317 mg dose of niacinamide, there are 3.27 x 10²² carbon atoms.
to know more about carbon refer here:
https://brainly.com/question/22530423#
#SPJ11
How many milliliters of 8.50×10−2 M NaOH are required to titrate each of the following solutions to the equivalence point?
A. 45.0 mL of 9.50×10−2 M HNO3
B. 30.0 mL of 8.50×10−2 M HC2H3O2 C. 55.0 mL of a solution that contains 1.85 g of HCl per liter
The volume of NaOH required is:(0.000914 mol NaOH) / (8.50×10−2 M NaOH) = 0.0108 L NaOH = 10.8 mL of NaOH is required.
Answer: 10.8 mL.
To determine the milliliters of 8.50×10−2 M NaOH required to titrate each of the following solutions to the equivalence point, use the following equations:
a) NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
Molarity is defined as the number of moles of solute per liter of solution.
The concentration of NaOH is given as 8.50×10−2 M.
Therefore, the number of moles of NaOH is:(8.50×10−2 M)(V NaOH) = n NaOH
where V NaOH is the volume of NaOH solution.
b) NaOH(aq) + HC2H3O2(aq) → NaC2H3O2(aq) + H2O(l)
Molarity is defined as the number of moles of solute per liter of solution.
The concentration of NaOH is given as 8.50×10−2 M.
Therefore, the number of moles of NaOH is:(8.50×10−2 M)(V NaOH) = n NaOHwhere V NaOH is the volume of NaOH solution.
c) HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
The number of moles of HCl is the product of the concentration and volume.
Hence, the number of moles of HCl is:(1.85 g/L HCl)(1 mol HCl/36.46 g HCl)(0.055 L HCl) = 0.000914 mol HCl
Molarity is defined as the number of moles of solute per liter of solution.
The concentration of NaOH is given as 8.50×10−2 M.
Therefore, the number of moles of NaOH required is:0.000914 mol HCl × (1 mol NaOH/1 mol HCl) = 0.000914 mol NaOH.
For similar question on titration.
https://brainly.com/question/13031875
#SPJ11
what relative masses of dimethyl amine and dimethyl ammonium chloride do you need to prepare a buffer solution of ph = 10.54?
To prepare a buffer solution of pH = 10.54, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.
A buffer solution is a solution that has the ability to resist changes in pH upon the addition of small amounts of acid or base. A buffer solution contains a weak acid and its conjugate base or a weak base and its conjugate acid. It can be prepared by mixing equal volumes of a weak acid and its conjugate base or a weak base and its conjugate acid.
Dimethyl amine is an organic compound with the formula (CH3)2NH. It is a weak base and can act as a proton acceptor. Dimethyl ammonium chloride is an organic compound with the formula (CH3)2NH2Cl. It is a salt of a weak base and a strong acid and can act as a proton donor.
Calculation of relative masses:
The pKa of dimethyl amine is 10.73.
To prepare a buffer solution of pH = 10.54,
the ratio of [A-]/[HA] should be 1/9.
Using the Henderson-Hasselbalch equation;
pH = pKa + log([A-]/[HA])10.54 = 10.73 + log([A-]/[HA])
log([A-]/[HA]) = -0.19[A-]/[HA] = 0.67/1.00
The sum of the masses of dimethyl amine and dimethyl ammonium chloride is 0.146 g. The ratio of their masses is 0.67:1.00.
So, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.
To know more about Buffer solution refer here :
https://brainly.com/question/13076037
#SPJ11
When scientists discovered that atoms are composed of smaller particles, why didn’t they reject atomic theory?
When scientists first discovered that atoms were composed of smaller particles, such as electrons, protons, and neutrons, they did not reject atomic theory because the experimental evidence supported the idea that atoms were still the fundamental building blocks of matter.
Instead of rejecting atomic theory, scientists modified it to incorporate the new information about the structure of atoms. For example, Ernest Rutherford's famous gold foil experiment in 1911 showed that atoms had a small, positively charged nucleus at their center, which was surrounded by negatively charged electrons.
This discovery led to the development of the modern model of the atom, which is still based on the idea that atoms are the smallest units of matter that retain the properties of an element. However, the model has been updated to reflect our current understanding of the subatomic particles that make up atoms.
To know more about atomic theories, here
brainly.com/question/28853813
#SPJ4
compared to the alkali metals, the alkaline-earth metals_____
Compared to the alkali metals, the alkaline-earth metals have higher melting and boiling points and have a smaller atomic radius.
Alkaline-earth metals are found in second group of the periodic table and have two valence electrons in their outermost shell. They have a lower reactivity than alkali metals because their outermost electrons are held more tightly due to their higher nuclear charge. The smaller atomic radius of the alkaline-earth metals also contributes to their increased reactivity compared to larger alkali metals. They tend to form ionic compounds with nonmetals due to their tendency to lose their two outermost electrons. They are important elements in many applications, including production of steel, aluminum alloys, in the extraction of metals from their ores.
To know more about Alkaline-earth metals, here
brainly.com/question/12835232
#SPJ4
a compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a(n) .
A compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.
Bases are compounds that dissolve in water to form hydroxide ions (OH-). They are hydroxide ion donors, to be precise. Bases have a pH value greater than 7. The OH- ions are released when bases are dissolved in water. Sodium hydroxide (NaOH) is a good example of a base.
When NaOH is dissolved in water, it produces hydroxide ions (OH-) and sodium ions (Na+). As a result, the solution is more basic, and the pH is greater than 7. The following are some examples of bases:
Sodium hydroxide (NaOH)Potassium hydroxide (KOH)Calcium hydroxide (Ca(OH)₂)Magnesium hydroxide (Mg(OH)₂)Ammonia (NH₃)Bases are commonly utilized in several chemical reactions. They're utilized as pH modifiers, reagents, and buffer solutions, among other things. They are also used in industries like cosmetics, detergents, and food. Furthermore, they are utilized in water treatment plants to control acidity levels and remove impurities.
Therefore, a compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.
To know more about hydroxide ions click here:
https://brainly.com/question/14619642
#SPJ11
Conclude Is the element silicon likely to form ionic or covalent bonds? Explain.
Elemento de la aplicación de Visio que se usa para organizar formas en grupos visuales, siendo afectados también cuando sus formas o elementos se mueven, copian o eliminan
Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called Grouping.
"Grouping" is an essential feature in the Microsoft Visio application that allows users to organize shapes into visual groups. With this feature, users can select multiple shapes and group them together, making them behave as a single entity. When one shape in the group is moved, copied, or deleted, the other shapes in the group are also affected.
This feature is particularly useful when creating complex diagrams or flowcharts, as it allows users to manipulate multiple shapes as a single unit. Overall, "Grouping" in Visio is a simple but powerful tool that helps users to organize and manage their shapes and diagrams with ease.
To know more about Visio, here
brainly.com/question/28002074
#SPJ4
--The complete question is, Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called ________.--