During a neighborhood baseball game in a vacant lot, a particularly wild hit sends a 0.145 kg baseball crashing through the pane of a second-floor window in a nearby building. The ball strikes the glass at 14.5 m/s , shatters the glass as it passes through, and leaves the window at 10.9 m/s with no change of direction. What is the direction of the impulse that the glass imparts to the baseball

Answer:

9 hr

Explanation:

Speed = distance/time

Let the time taken by the train be t.

=> 70 = 630/t

=> t = 630/70

=> t = 9

it take 9 hr to complete its journey

Answer:

9 hours

Explanation:

Using the formula to solve motion problems: d=r*t (Distance = Rate * Time)

Given:

Distance = 630 km

Rate (Speed) = 70 km/h

Time = Distance / Time

Time = 630/70

               = 9

Answer: True

Explanation: "The lens is a transparent biconvex structure in the eye that, along with the cornea, helps to refract light to be focused on the retina."

Answer:

(A-) Number of turns in secondary coil will be less than 125.

(B-) EXPLAIN- The voltage is to be lowered. The voltage will be reduced from 120 to 9 volts. As a result, a step down transformer will be used, indicating that the secondary coil's number of turns would be less than 125.

(C-) The number of turns on the secondary coil is 12.5

Explanation:

In electrical networks and transmission lines, a step-down transformer can be used in a number of ways.

Step down transformer formula-

                  [tex]V_s=\frac{N_s\times V_p}{N_p}[/tex]

We are given with the -

Primary voltage [tex]V_p[/tex] = 120V

Secondary voltage [tex]Vs=12V[/tex]

Number of primary turns [tex]N_p=125[/tex]

       Since , the transformer ratio is given as -

                   [tex]\frac{N_s}{N_p} =\frac{V_s}{V_p}[/tex]

So, the number of turns on the secondary coil is - [tex]N_s=N_p\times\frac{V_p}{V_s}[/tex]

            Putting , the given values -:

                [tex]125\times\frac{12}{120}[/tex]

         =   12.5

Therefore , the number of turns on secondary coil is 12.5 .

Answer:

see that the correct one is B

Explanation:

To solve this exercise let us use the kinematic relations

           v² = v₀² - 2 a x

as they indicate that the car stops, therefore the final speed is yield v = 0

          x = v₀² / 2a

let's calculate

          x = 2²/(2 0.8)

         x = 2.5 m / s²

When reviewing the answers we see that the correct one is B

Answer:

Explanation:

Angular momentum = [tex]I*w[/tex]

I = Moment of inertia

w = Angular velocity

Hollow pipe can be considered as hollow cylinder

Moment of Inertia of Hollow cylinder = [tex]Mr^2[/tex]

Moment of Inertia of solid cylinder= [tex]\frac{Mr^2}{2}[/tex]

Clearly Moment of inertia of hollow pipe is greater which states that Angular momentum of it will be greater.

For more information on this visit

https://brainly.com/question/23379286

Answer:

117/60*50

Explanation:

Trust me bc I'm smart

Answer:

geiger counter with geiger mueller

Answer:

Explanation:

you can say the law of superpoition can tell us that each rock layer is older than the one above it. So, the relative age of the rock or fossil in the rock or fossil in the rock is older if it is farther down in the rock layers. hope it helps

Answer:

(a) The volume of water is 100 cm³

(b) The volume of the rock is 20 cm³

(c) The density of the rock is 30 g/cm³

Explanation:

The given parameters of the perspex box are;

The area of the base of the box, A = 10 cm²

The initial level of water in the box, h₁ = 10 cm

The mass of the rock placed in the box, m = 600 g

The final level of water in the box, h₂ = 12 cm

(a) The volume of water in the box, 'V', is given as follows;

V = A × h₁

∴ The volume of water in the box, V = 10 cm² × 10 cm = 100 cm³

The volume of water in the box, V = 100 cm³

(b) When the rock is placed in the box the total volume, [tex]V_T[/tex], is given by the sum of the rock, [tex]V_r[/tex], and the  water, V, is given as follows;

[tex]V_T[/tex] = [tex]V_r[/tex] + V

[tex]V_T[/tex] = A × h₂

∴ [tex]V_T[/tex] = 10 cm² × 12 cm = 120 cm³

The total volume, [tex]V_T[/tex] = 120 cm³

The volume of the rock, [tex]V_r[/tex] = [tex]V_T[/tex] - V

∴ [tex]V_r[/tex] = 120 cm³ - 100 cm³ = 20 cm³

The volume of the rock, [tex]V_r[/tex] = 20 cm³

(c) The density of the rock, ρ = (Mass of the rock, m)/(The volume of the rock)

∴ The density of the rock, ρ = 600 g/(20 cm³) = 30 g/cm³

Answer :

Last choice

Answer:

its frequency is too low

Answer:

200 meters

Explanation:

20 x 10 = 200

Answer:

A Inertia

Explanation:

Answer: Q= QH - QL

= W + QL - QL

= W

= 1 kj/8

Explanation:

Since the net rate is positive the room will be heated.

Answer:

magnitude is 1382.59 N/C

Explanation:

Given the data in the question;

The time taken is;

t = x / v

we substitute;

t = ( 2 × 10⁻²) / ( 5.69  × 10⁶ )

t = 3.5149 × 10⁻⁹ s

next, the acceleration is;

a = 2y/t² = [2( 0.150 × 10⁻²)] / [ ( 3.5149 × 10⁻⁹ )² ]

a =  2.42826 × 10¹⁴ m/s²

now, the electric field is;

E = ma / q

we know that;

mass of electron m = 9.11 × 10⁻³¹ kg,

charge of electron q = 1.60 × 10⁻¹⁹ coulomb

we substitute

E = ( 9.11 × 10⁻³¹ )(2.42826 × 10¹⁴) / 1.60 × 10⁻¹⁹

E = 2.21214 × 10⁻¹⁶  / 1.60 × 10⁻¹⁹

E = 1.3826 × 10²¹

E = 1382.59 N/C

Therefore, magnitude is 1382.59 N/C  

Answer:

(a)

W_friction = 98.1 J

W_net = 550.9 J

(b)

W_friction = 98.1 J

W_net = 463.95 J

Explanation:

(a)

First, we will calculate the work done by friction:

[tex]W_{friction} = \mu R = \mu W = \mu mg\\W_{friction} = (0.2)(50\ kg)(9.81\ m/s^2)\\[/tex]

W_friction = 98.1 J

Now, the work done by Eskimo will be:

[tex]W_{Eskimo} = FdCos\theta\\W_{Eskimo} = (110\ N)(5.9\ m)Cos\ 0^o\\[/tex]

W_Eskimo = 649 J

So, the net work will be:

W_net = W_{Eskimo} - W_{friction}

W_net = 649 J - 98.1 J

W_net = 550.9 J

(b)

First, we will calculate the work done by friction:

[tex]W_{friction} = \mu R = \mu W = \mu mg\\W_{friction} = (0.2)(50\ kg)(9.81\ m/s^2)\\[/tex]

W_friction = 98.1 J

Now, the work done by Eskimo will be:

[tex]W_{Eskimo} = FdCos\theta\\W_{Eskimo} = (110\ N)(5.9\ m)Cos\ 30^o\\[/tex]

W_Eskimo = 562.05 J

So, the net work will be:

W_net = W_{Eskimo} - W_{friction}

W_net = 562.05 J - 98.1 J

W_net = 463.95 J

The image of this hollow sphere and uniform rod is missing, so i have attached it.

Answer:

A) J = 0.7443 kg•m²

B) T = 1.9169 N•m CCW

C) α = 2.5754 rad/s²

D) a = 3.966 m/s²

Explanation:

A) The moment of inertia J of the contraption around the fulcrum is given by the formula;

J = Jℓ + Jr

Let's calculate Jℓ

Jℓ = [((0.34²/3) × 0.50 × 0.34)/1.78] + (0.48 × (0.34 + 0.64)²)

Jℓ = 0.4647 kg•m²

Now, let's Calculate Jr

Jr = ((1.78 - 0.34)²/3) × ((1.78 - 0.34)/1.78) × 0.50

Jr = 0.2796 kg•m²

Thus;

J = 0.4647 + 0.2796

J = 0.7443 kg•m²

(b) Using CCW as positive, Torque in Nm is calculated as;

T = Tℓ - Tr

Let's calculate Tℓ

Tℓ = [(0.48 × (0.64 + 0.34)) + (0.50 × 0.34/1.78) × 0.34/2)] × 9.81

Tℓ = 4.7739 N•m CCW

Now, let's Calculate Tr;

Tr = [(0.50 × (1.78 - 0.34)/1.78) × (1.78 - 0.34)/2)] × 9.81

Tr = 2.857 N•m CW

Thus;

T = 4.7739 - 2.857

T = 1.9169 N•m CCW

(c) The angular acceleration α of the contraption, using CCW is gotten from the formula;

α = T/J

α = 1.9169/0.7443

α = 2.5754 rad/s²

(d) The linear acceleration a of the right end of the rod, using up as positive is given by;

a = α*(1.78 - 0.34)

a = 2.5754 × 1.54

a = 3.966 m/s²

A) the moment of inertia of the contraption is 0.7443 kgm²

B) The torque about the fulcrum is 1.9169 Nm

C) Angular acceleration of the contraption is 2.5754 rad/s²

D) The linear acceleration of the contraption is 3.966 m/s²

(A) The moment of inertia I of the contraption around the fulcrum is given by :

[tex]I = [(0.34^2/3) \times 0.50 \times 0.34)/1.78 + (0.48 \times (0.34 + 0.64)^2)] + [(1.78 - 0.34)^2/3) \times (1.78 - 0.34)/1.78) \times 0.50][/tex]

I = 0.4647 + 0.2796

I = 0.7443 kgm²

(B) Using CCW as positive, Torque in Nm is given by;

T = [(0.48 × (0.64 + 0.34)) + (0.50 × 0.34/1.78) × 0.34/2)] × 9.81 - [(0.50 × (1.78 - 0.34)/1.78) × (1.78 - 0.34)/2)] × 9.81

T = 4.7739 - 2.857

T = 1.9169 Nm

(C) The angular acceleration (α) of the contraption is given by:

α = T/I

since, torque is defined as T = Iα

α = 1.9169/0.7443

α = 2.5754 rad/s²

(D) The linear acceleration (a) of the right end of the rod

a = αr

where r is the distance from the pivot

a = α × (1.78 - 0.34)

a = 2.5754 × 1.54

a = 3.966 m/s²

Learn more about moment of inertia:

https://brainly.com/question/6953943?referrer=searchResults

Answer:

x = 0.056 m

ΔKE = 0.489 J

Explanation:

Given that

Angle, θ = 38°

Length, L = 1.7 m

Mass, m = 0.09 kg

Spring constant, K = 590 N/m

If we use the Work-Energy theorem, then we know that Potential Energy, PE = Kinetic Energy, KE

This is mathematically written as

1/2kx² = mgH

The height, H we can get by using the relation

H = L.Sinθ

H = 1.7 * Sin 38

H = 1.7 * 0.6157

H = 1.047 m

Next, we use the Work-Energy theorem

1/2kx² = mgH

1/2 * 590 * x² = 0.09 * 9.8 * 1.047

295 * x² = 0.9234

x² = 0.9235 / 295

x² = 0.00313

x = √0.00313

x = 0.056 m

If the spring loses contact at x = 0.056, definitely, it will also lose contact at x = 0.8

Then we use the formula

ΔKE = mg(H - H1)

ΔKE = mg(xsinθ - x2.sinθ)

Where, x = 1.7 , x2 = 0.8

ΔKE = 0.09 * 9.8 (1.7 * sin 38 - 0.8 * sin 38)

ΔKE = 0.882(1.047 - 0.493)

ΔKE = 0.882 * 0.554

ΔKE = 0.489 J

Answer:

50N

Explanation:

W=Fd

150=F(3)

50N=F

One similarity is the use of physical body whereas one difference is that one is exercise and the other is a sport.

One similarity between a set and a bump in volleyball is the movement and use of legs and hands.

Whereas one difference between a set and a bump in volleyball is that completing several reps of a particular exercise in a row is called a set while on the other hand,  the basic pass in volleyball is known as bump.

Learn more about set here: https://brainly.com/question/1090891

Answer:

a

Explanation:

How long would it take a machine to do 5.000

joules of work if the power rating of the machine

is 100 watts?

The given machine will take 50 s to complete the work. the power is the rate of performing work.

It can be defined as the rate of performing work. It can also be written as the amount of work divided by the time it takes to complete the work.

[tex]p = \dfrac wt[/tex]

So

[tex]t = \dfrac w p[/tex]

Where,

[tex]p[/tex] - power = 100 watt  = 100 J/s

[tex]t[/tex] - time = ?

[tex]w[/tex]- work = 5000 J

Put the values in the formula,

[tex]t = \dfrac{ 5000 \rm \ J} {100 \rm \ J/s}\\\\t = 50 \rm \ s[/tex]

Therefore, the given machine will take 50 s to complete the work.

Learn more about work and time:

https://brainly.com/question/2784242

Answer:

fem = 7.58 10⁻⁵ V

Explanation:

For this exercise we use Faraday's law

          fem =   [tex]- \frac{d \Phi _B}{dt}[/tex]

the magnetic flux is

          Ф_B = B. A = B A cos θ

Tje bold are vectros.  Suppose the case where the normal to the surface of the red blood cell is parallel to the field, therefore the angle is zero and the cos 0 = 1

The red blood cell area is

          A =π r²

indicate that the diameter is r = 8.00 mm = 8.00 10⁻³ m

the magnetic field has a frequency of f=60 Hz, and B₀ = 1.00 10⁻³T,  therefore we can write it

          B = B₀ sin (wt) = B₀ sin( 2π f t)

we substitute

           fem = - A dB / dt

           fem = - A B₀  [tex]\frac{ d (sin ( 2\pi f t)}{dt}[/tex]

           fem = - π r² Bo (2πf  cos 2πft)

the maximum electromotive force occurs when the function is ±1

           fem = 2 π² r² B₀ f

let's calculate

           fem = 2π²  (8.00 10⁻³)²  1.00 10⁻³ 60

           fem = 7.58 10⁻⁵ V

Answer:

It's plastic.

trust me it's plastic, i've rad it somewhere.

All of them have something that's not like the others.

-- Rubber is the only one on the list that has two repeated letters.

-- Plastic is the only one on the list thagt has no repeated letters.

-- Plastic is the only one on the list that has no 'r' in its name.

-- Copper is the only one on the list that is an element, not a compound.

-- Copper is the only good electrical conductor on the list.

-- Plastic is the only one on the list with more than six letters in its name.

-- Rubber is the only one on the list with no 'p' in its name.

-- Plastic is the only one on the list that doesn't end in "-er".

Answer:

a) the torque required is  10.53 N-m

b) The magnitude force applied tangentially is 12.33 N

Explanation:

Given the data in the question;

mass m = 1.765 kg

radius r = 0.854 m

first we calculate the moment of inertia;

[tex]I[/tex] = [tex]\frac{2}{5}[/tex]mr²

we substitute

[tex]I[/tex] = [tex]\frac{2}{5}[/tex] × 1.765 × (0.854)²

[tex]I[/tex] = 0.514897 kg.m²

a)

Find the torque required to bring the sphere from rest to an angular velocity of 317 rad/s, clockwise, in 15.5 s

ω[tex]_{initial[/tex] = 0

ω[tex]_{final[/tex] = 317 rad/s

t = 15.5 s

we know that; ω[tex]_{final[/tex] = ω[tex]_{initial[/tex] + ∝t

so we substitute

317 = 0 + ∝(15.5)

∝ = 317 / 15.5

∝ = 20.4514 rad/s²

so

ζ = [tex]I[/tex] × ∝

we substitute

ζ = 0.514897 × 20.4514

ζ = 10.53 N-m

Therefore, the torque required is  10.53 N-m

b)

What magnitude force applied tangentially at the equator would provide the needed torque.

ζ = F × r

we substitute

10.53  = F × 0.854

F = 10.53 / 0.854

F = 12.33 N

Therefore, magnitude force applied tangentially is 12.33 N

Answer:

B or 2

Explanation:

Answer:

1.61 N/kg

Explanation:

Take the universal gravitational constant G as 6.67 × 10^(-11) Nm²/kg²

The required gravitational field strength

= 6.67 × 10^(-11) × 7.3 × 10^(22) / (1738000)²

= 1.61194103 N/kg

= 1.61 N/kg (corr. to 3 sig. fig.)

Answer:

The magnification of an image is equal to the ratio of the image height to the object height.

Answer:

Both.

Explanation:

Given that a block and a ball have the same mass and move with the same initial velocity across a floor and then encounter identical ramps. The block slides without friction and the ball rolls without slipping. 1)Which one makes it furthest up the ramp ?

Since both of them have the same mass and the same initial velocity, then, they will both have the same kinetic energy.

That is,

K.E = 1/2mv^2

Friction is a force that opposes motion. And since the frictional force is zero,

Both of them will accelerate from Newton's law.

F = ma

We can therefore conclude that both of them will make it further up the ramp.