Hi there!
We can use impulse for this situation:
I = Δp = mΔv
Impulse = Force × time, so:
I = 63.9(24) = 1533.6 Ns
Find force by dividing by time:
I/t = 1533.6/1.2 = 1278 N
A block with a mass of 6.0 kg is
held in equilibrium on an incline
of angle θ = 30.0° by a horizontal
force, F, as shown in the figure.
Find the magnitudes of the
normal force on the block and of F. (Ignore friction.)
(a) The normal force on the block is 50.92 N.
(b) The horizontal force on block keeping it in equilibrium is 29.4 N.
The given parameters;
mass of the block, m = 6 kgangle of inclination, θ = 30.0°The normal force on the block is calculated as follows;
[tex]F_n = W \times cos(\theta)[/tex]
where;
W is the weight of the block[tex]F_n = mg \times cos(\theta)\\\\F_n = 6 \times 9.8 \times cos(30)\\\\F_n = 50 .92 \ N[/tex]
The horizontal force on block keeping it in equilibrium is calculated as follows;
[tex]F- F_x = 0\\\\F-mgsin\theta= 0\\\\F = mgsin\theta\\\\F = 6 \times 9.8 \times sin(30)\\\\F = 29.4 \ N[/tex]
Learn more here:https://brainly.com/question/24860178
A 75.0 kg man pushes on a 500,000 kg wall for 250 s but it does not move.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The work done in the given case is 0
[tex] \large \boxed{ \mathfrak{Step\:\: By\:\:Step\:\:Explanation}}[/tex]
For calculating the work done by an object we apply the formula, that is ~
[tex]f \times s \times \cos( \theta) [/tex]where f represents force applied, and s represents displacement.
but here, the displacement is zero since the wall didn't move at all, Therefore If we plug it's value as 0, we get
[tex]f = 0 \times s \times \cos( \theta) [/tex]hence,
[tex]work \: done = 0[/tex]So therefore, we can conclude that the man hasn't done any work.
Hope it helps.
Do comment if you have any query.
What is an electron cloud 5th grade short answer.
Answer:
the system of electrons surrounding the nucleus of an atom
An object of mass 10 kg is moving along positive x- axis with velocity 5 m/s. At some point it breaks into two parts of 6 kg and 4 kg. 6 kg moves making 600 with x –axis and 4 kg moves making -300 with axis. What is velocity of their centre of mass after breaking?
Explanation:
Correct option is
B
−3m/s
2
Given,
m=10kg
u=10m/s
v=−2m/s
t=4sec
The acceleration is rate of change of velocity,
a=
t
v−u
a=
4
−2−10
a=
4
−12
=−3m/s
2
The correct option is B.
The product of pressure and volume of any gas equals a constant, k. What variable(s) must not change in order for the value of k to remain constant
when energy from battery was added to water, were the gases produced by this made of the same particles as those produced from heating the water?
Batteries often convert chemical energy directly to electrical energy.
From the experiment, the constructed conclusion was that;
The Two different gases with different properties are made from adding energy from a battery to water. The particles that make up these different gases is different from each other. They are different than the ones that were made from heating water.The matter that is composed of substances have to originate from matter that made up some of the original water particles.
When energy from a battery is added to water, two streams of gas bubbles is said to be produced. Then a lit match is put into trapped gas from these two sources, one pops and the other glows brighter.
The study was to test the flammability of gases produced by providing energy to water with electricity.
Learn more from
https://brainly.com/question/14448085
Bella wants to know which mode of transportation is the fastest for getting from her home to the grocery store. She can drive her car, ride her bike, walk, or charter a helicopter.
Independent variable
Dependent variable
Controlled variables
Hypothesis
Based on the question, the following applies:
Independent variable: Time Dependent variable: Mode of transportationControlled variable: Distance traveledHypothesis: IF Bella charters a helicopter, THEN she will get to the grocery store faster. VARIABLES IN AN EXPERIMENT:The following are definitions of some variables in an experiment:
Independent variable in an experiment is the variable that is altered or changed by the experimenter. Dependent variable is the variable that is measured or recorded in an experiment. Controlled variable is the variable that is kept constant or unchanged throughout the experiment.According to this question, Bella wants to know which mode of transportation is the fastest for getting from her home to the grocery store. The following are the variables in this experiment:
Independent variable: Time Dependent variable: Mode of transportationControlled variable: Distance traveledHypothesis: IF Bella charters a helicopter, THEN she will get to the grocery store faster.Learn more about experimental variables at: https://brainly.com/question/10415158
if a substance changes from a vapor to a liquid it ____ HELP FAST
Answer:
Explanation:
Condensing is the word used to indicate the change of state of a substance from vapor to liquid, as in this case. During condensation, the substance releases thermal energy to the environment, therefore the kinetic energy of the molecules in the vapor decreases until they become closer to each other and they start to be affected by the intermolecular forces and so the substance becomes a liquid.
Work is required to lift a barbell. How many times more work is required to lift the barbell 2 times as high
Answer:
2 time
Explanation:
when distance double the work double
What is the anomalous expansivity of water
Answer:
The anomalous expansion of water is an abnormal property of water whereby it expands instead of contracting when the temperature goes from 4°C to 0°C, and it becomes less dense. The density becomes less and less as it freezes because molecules of water normally form open crystal structures when in solid form.
si el atomo anterior de litio eléctricamente neutro ¿cuantos electrones deberia tener?
A 34. 8 n object is in free fall. What is the magnitude of the net force which acts on the object? answer in units of n.
Answer:
-34.8n
Explanation:
when object in free fall, only force is the Force by weight,
which is 34.8 and direction is down.
How long would it take a 500 w electric motor to do 150,000 j of work
Explanation:
300 second = 5 minutes
details
500 watts = 500 joules per second
Time = (1.50 x 10^5 joules)/(5 x 10^2 joules per second) = .3 x 10^3 seconds =300 second
PLS HELP ASAP it's just 2 questions and they are multiple choice!
What is the best reference point for the car that is not in motion
Answer:
A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point.
Explanation:
2Cu + 02 —> 2Cuo
In the equation above, what is the
coefficient of the oxygen molecule?
A) O
B) 1
C) 2.
D) 4
Answer:
C
Explanation:
31. TRUE or FALSE A cheese puff must contain C since CO2 was produced when it was burned,
I
Answer:
True
Explanation:
What is equilibrium?
Answer:
Balance is the ability to maintain body balance when placed in various positions.
----------------------------------------
[tex] \green{ \boxed{ \boxed{ \sf{Lusi \: Adriana} } } } [/tex]
Hope it is Useful..Answer:
A state of physical balance.
I hope this helps you!!!
i swimmers swims 180m in 20 seconds how much meters does she swim in a second
Answer:
20
Explanation:
20m= 1 seconds
40m= 2 seconds
180÷9=20
There are many isotopes of the element technetium (TC).
What do the nuclei of different technetium isotopes have in common?
[
Answer:
hikknn says he is not happy birthday hun
What is the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod
Answer:
C) 5ML^2
Explanation:
2 Spheres of mass M
Bug's mass 3M
Rod length 2L, radius L
Find Rotational Inertia I
I=Σmr^2
I=(3M+M+M)L^2
I=5ML^2
The rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Rotational inertia of the systemThe rotational inertia of the system is determined by summing all the masses together and multiply with the radius.
I(t) = Σmr²
Where;
m is the massr is the radiusI(t) = Inertia of the 2 spheres + inertia of the bug
I(t) = (M + M)L² + (3M)L²
I(t) = 2ML² + 3ML²
I(t) = 5ML²
Thus, the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Complete question is below:
There are 2 Spheres of mass M and Bug's mass 3M. The Rod length is 2L, radius L.
Learn more about rotational inertia here: https://brainly.com/question/14001220
A catamaran with a mass of 5.44×10^3 kg is moving at 12 knots. How much work is required to increase the speed to 16 knots? (One knot = 0.51 m/s.)
show all steps
The work that is required to increase the speed to 16 knots is 14,176.47 Joules
If a catamaran with a mass of 5.44×10^3 kg is moving at 12 knots, hence;
5.44×10^3 kg = 12 knots
For an increased speed to 16knots, we will have:
x = 16knots
Divide both expressions
[tex]\frac{5.44 \times 10^3}{x} = \frac{12}{16}\\12x = 16 \times 5.44 \times 10^3\\x = 7.23\times 10^3kg\\[/tex]
To get the required work done, we will divide the mass by the speed of one knot to have:
[tex]w=\frac{7230}{0.51}\\w= 14,176.47Joules[/tex]
Hence the work that is required to increase the speed to 16 knots is 14,176.47 Joules
Learn more here: https://brainly.com/question/25573786
A skydiver that has a weight of 1050 N. jumps from a plane at an altitude of 5000 m. How much work is performed on the skydiver?
Answer:
5.25MJ
Explanation:
Considering the weight of the skydiver constant over the descent -ie, the acceleration of gravity not decreasing as you go up the earth surfice, the work is simply the product of the two:
[tex]w= \vec F\cdot \vec x = Fx = 1050\times 5000 = 5,250,000 = 5.25MJ[/tex]
When the sum of all the forces acting on a block.
Answer:
finish the question pls
Explanation:
In what part of the electromagnetic spectrum do the biggest telescopes on earth operate?.
Explanation:
Notice it says above that the largest optical telescopes in the world are reflectors. Optical telescopes collect visible light. Even larger telescopes are built to collect light at longer wavelengths radio waves.
how long does it take saturn to rotate on its axis
Answer:
Orbit and Rotation
One day on Saturn takes only 10.7 hours (the time it takes for Saturn to rotate or spin around once), and Saturn makes a complete orbit around the Sun (a year in Saturnian time) in about 29.4 Earth years (10,756 Earth days).
Explanation:
Name 3 things you have in your home that you could use to make an electromagnet.
Answer:
radio TV set and telephone
solar power generates electricity from what source
An astronomer discovers a massive galaxy which has four nuclei. What is a likely explanation for a galaxy having more than one nucleus
The universe is made of a lot of galaxies. The likely explanation for a galaxy having more than one nucleus is that the galaxy must have swallowed several smaller galaxies that were its neighbors.
There are some reason behind the theory that the eating up of a galaxy is by another galaxy. The galaxy is said to have a powerful past due to the fact that a lot of smaller galaxies were eaten up.The universe is known to have a very largest galaxy called the giant elliptical galaxy that is made up of about a trillion stars.
Learn more from
https://brainly.com/question/22885678
Mxcbccbhf chucklingbdbfbfndbfnf
Answer:
4 seconds
Explanation:
On the Y axis - you go to 12. Go directly horizontally till you hit the line. Then go directly down. If you do this correctly, you should hit 4 seconds on the X axis.