Drag each label to the correct location.

Identify the boundary type that is being described.

The force experienced by the ball to get accelerated was found to be 3.65.

The rate of change in velocity is defined as acceleration. The magnitude of acceleration at every point along a trajectory is provided by the rate of change of velocity in both magnitude and direction at that location. The real acceleration at time t is determined in the limit as a time interval.

Time = 20s

The initial velocity is 0m/s.

Final speed = 73m/s

Unknown: Experience with forcing the ball =?

To answer this problem, we use Newton's second law of motion's equation:

formula for force was :

F=ma

The mass is denoted by m.

The final velocity is denoted by v.

The starting velocity is denoted by u.

It is the amount of time spent

So;

F = m (v - u / t)

F = m (73-0/20)

= 3.65 times mass

To learn more about acceleration follow the given link: brainly.com/question/27973611

#SPJ4

Assuming the steel deck has a coefficient of linear thermal expansion of 12 x 10-6 m/m/°C, the change in length of the steel deck of the span when the temperature increases from -5.0 degree C to 18.0 degree C is 2.16 m. (1410 m x 12 x 10-6 m/m/°C x 23°C = 2.16 m)

Steel is an alloy made of iron and other elements, and is one of the most widely used materials in the world. Steel structures such as bridges are subject to changes in size and shape due to changes in temperature. When steel is exposed to temperatures higher than 0°C, it expands, and when it is exposed to temperatures lower than 0°C, it contracts.

The coefficient of linear thermal expansion is the rate at which the length of an object changes with temperature. This coefficient can vary depending on the type of steel and other factors. For the Humber Bridge, the steel deck of the span has a coefficient of linear thermal expansion of 12 x 10-6 m/m/°C. Therefore, when the temperature increases from -5.0°C to 18.0°C, the steel deck of the span will expand by 2.16 m.

To know more about linear thermal expansion  refer to the link brainly.com/question/28232487

#SPJ4

The velocity of the ball is constant the entire time the ball is moving in a circular path at the end of a rope, in a uniform circular motion.

Hence, Option D is correct.

To know more about Circular motion here

https://brainly.com/question/28503060

#SPJ4

The acceleration is still -9.81 m/s2, and the instantaneous velocity of the shuttlecock when it hits the ground is [tex]V_{int}[/tex] = [tex]\sqrt{U^{2} + 19.6H }[/tex]

Acceleration is determined as the rate of change of velocity of an object with respect to time. Acceleration is represented by the SI unit is meter per second squared (m/[tex]s^{2}[/tex]). Acceleration is denoted by "a".

Instantaneous velocity is the rate of change of position for a time interval which is almost zero (very small). The magnitude of the instantaneous velocity is instantaneous speed. It is measured by using SI unit m/s.

Mathematically, the equation for acceleration is:

a =  [tex]v\frac{dv}{dt}[/tex]

ah = [tex]v^{2}[/tex] - [tex]u^{2}[/tex]

Where the acceleration is still -9.81 m/s2

Hence, [tex]v^{2}[/tex] - [tex]u^{2}[/tex] = 2 (-9.81) * -H

Therefore, [tex]v_{int}[/tex] = [tex]\sqrt{U^{2} + 19.6H }[/tex]

To know more about acceleration here

https://brainly.com/question/12550364

#SPJ4  

R is the radius of speed curvature of the turn, g is the acceleration due to gravity, and μs is the coefficient of static friction.

θ is the angle of banking. For no slippage to occur even when the contribution of the frictional force in the centripetal force is not considered, we ignore the effect of friction and get the Time. Well, if the radius must be a single measurement, then the turn will be perpendicular.

While you're gathering necessary data, there's a discrepancy in your Average speed. Unless there are also tighter or unbanked turns, it's difficult to imagine the average speed=cornering speed.

To know more about Speeds:

https://brainly.com/question/4931057

#SPJ4

As according Scientific American, even one photon can result in a visible burst of light.

The human eye can see about 10 photons.To an eye accustomed to the dark, the weak light may appear to be flashing, yet each twinkling just represents a few photons.When shooting images of the cosmos from orbit with very sensitive equipment at very low temperatures, a photon stream would be sufficient.

The answer is yes because the receptors in the retina can respond to a single photon.However, brain filters only allow a signal to pass through and activate the brain when five to nine additional signals do the same in less than a hundred milliseconds.

To know more about magnitude visit:

https://brainly.com/question/14452091

#SPJ4

The work done by the gas is positive, and no heat exchange occurs. The internal energy of the system has increased.

An adiabatic process is a process in which no heat is exchanged with the surroundings. Therefore, there is no heat added or removed from the system and the work done by the gas is positive. Since no energy is exchanged with the surroundings, the internal energy of the system will increase, since work must be done to expand the gas.The work done by the gas is positive, and no heat exchange occurs.The internal energy of the system has increased.

learn more about work done here

https://brainly.com/question/12910764

#SPJ4

The number of wavelengths increases corresponding to the orbital number of the shell.

The quantum mechanical model of atoms represents the three-dimensional location of the electron in a probabilistic manner using a mathematical function known as a wavefunction, which is sometimes denoted as. Orbitals are another name for atomic wavefunctions. The wavefunction's squared magnitude reflects the probability distribution of locating the electron in a certain region of space. As a result, atomic orbitals characterize the regions of an atom that are most likely to contain electrons. Three quantum numbers characterize an atomic orbital. Any positive integer can be used as the primary quantum number, n. n is connected to the general region for orbital energy value and the average distance of an electron from the nucleus. 

We can learn more about orbital number here:

https://brainly.com/question/5087295#

#SPJ4

Answer:

[tex]2.09 m/s^{2}[/tex]

Explanation:

The upward acceleration of an object can be calculated using the formula:

[tex]a = F / m[/tex]

where:

a is the acceleration of the object (in meters per second squared)

F is the force acting on the object (in newtons)

m is the mass of the object (in kilograms)

So in this case, we have:

[tex]a = 11000 N / 5250 kg = 2.09 m/s^2[/tex]

This is the upward acceleration of the helicopter when a force of 11000 N is acting on it.

This sample tends to break into cubes and is not extremely hard, perhaps just slightly harder than or as hard as a fingernail.

To learn more about sample refer to:

https://brainly.com/question/24517831

#SPJ4

Galena is not very hard, maybe slightly harder than or as hard as a fingernail and seems to break into cubes.

The main source of lead is galena, which is frequently mined for its silver content. In ceramic glaze, it can serve as a source of lead.

Galena was designated as Missouri's official mineral in 1967. The Joplin-Granby region in southwest Missouri, which is a part of the Tri-State Mining District, saw a boom in galena mining. Crawford, Washington, Iron, and Reynolds Counties all have rich deposits.

Galena is lead sulfide with a specific gravity of 7.4 to 7.6 and a Moh's hardness of 2.5, making it actually rather soft. However, it is VERY heavy. It weighs roughly 700 pounds per cubic foot, for comparison.

To know more about minerals visit:

https://brainly.com/question/15844293

#SPJ4

For the circuit shown in the figure, 0.071 A is the current through resistor R1.

What is circuit ?
Circuit is an electrical network consisting of interconnected components that allow electricity to flow through it. It is used to control, regulate, and direct the flow of electricity in order to perform a specific task. A circuit is composed of wires, resistors, transistors, capacitors, and other components which are connected together in order to form a complete system. This system can be used to control a variety of electrical devices, such as lights, motors, and computers. Circuits can be used to create a wide range of applications, from simple household appliances to complex industrial machines.

The current through R1 can be calculated using Ohm's Law:

I = V/R = (9V)/(120Ω) = 0.075 A

Therefore, the answer is A) 0.071 A.

To learn about more circuit

https://brainly.com/question/26064065

#SPJ4

The value of Young's modulus will be 6.78*10^8 N/m^2

Linear elastic solid materials have a mechanical characteristic called Young's modulus (Y), which is also referred to as the elastic modulus. It explains how strain (proportional deformation) and stress (force per unit area) interact with one another in a material.

The stiffness of a solid or its resistance to elastic deformation under stress is measured by the Young's modulus (E or Y). It connects strain (proportional deformation) along an axis or line to stress (force per unit area).

Given elongation delta L=1.10 m

Mass of A=65.0 kg,

L=45.0 m

D=7 mm

radius =  r=7/2=3.5 mm

Since we know the Young's Modulus (Y) Can be defines as [tex]Y=\frac{\text { stress }}{\text { strain }}=\frac{\mathrm{F} / \mathrm{A}}{\Delta l / L}[/tex]

Now, (4/{L)=(1.10 m/45.0 m)=0.0244

[tex]\begin{aligned}\ \frac{F}{A}=\frac{M g}{A} & =\frac{65 \mathrm{~kg} \times 9.8 \mathrm{~m} / \mathrm{sec}^2}{\pi r^2} \\& =\frac{65 \mathrm{~g} \times 9.8 \mathrm{~m} / \mathrm{sec}^2}{3.14 \times\left(3.5 \times 10^{-3}\right)^2} \\& =\frac{65 \times 9.8}{3.14 \times 12.25 \times 10^{-6}} \mathrm{~N} / \mathrm{m}^2 \\& =\frac{637}{38.465} \times 10^6 \mathrm{~N} / \mathrm{m}^2 \\\frac{F}{A} & =16.56 \times 10^6 \mathrm{~N} / \mathrm{m}^2\end{aligned}$$[/tex]

Therefore, the value of Young's modulus will be

[tex]$$\begin{aligned}& Y=\frac{F / A}{\Delta l / L}=\frac{16.56 \times 10^{-6} \mathrm{~N} / \mathrm{m}^2}{0.0244}=\left(678.688 \times 10^6\right) \mathrm{N} / \mathrm{m}^2 \\& Y=6.78 \times 10^8 \mathrm{~N} / \mathrm{m}^2\end{aligned}$$[/tex]

For more questions on Young's modulus

https://brainly.com/question/28757637

#SPJ4

Consider how much energy is required to melt one kilogram of ice at zero degrees to produce one kilogram of water at zero degrees.

The energy required to melt one kilogram of ice is determined by Q = mLf = (1.0 kg)(334 kJ/kg) = 334 kJ using the equation for a change in temperature and the value for water from Table 1. Water is converted from a liquid to a gas by the process of evaporation, which requires a significant amount of energy. The amount of energy needed to cause the state change is known as the latent heat of vaporization. At 1 atmosphere of pressure, the latent heat of vaporization is 539 calories per gram of water.

Learn more about energy here-

https://brainly.com/question/24284560

#SPJ4

Since every action has an equal and opposite response according to Newton's third law of motion, the impulses that colliding objects exert on one another are equal and opposite.

This implies that whenever one item exerts force on another, the other object responds by exerting a force that is equal to and opposite to that exerted by the first object. A collision is a brief interaction between two bodies or more than two bodies at once that results in a change in the motion of the bodies involved due to the internal forces at play. force is involved in collisions (there is a change in velocity ). When two bodies collide, their combined kinetic energy stays constant, which is known as an elastic collision.

Learn more about kinetic energy  here

https://brainly.com/question/26472013

#SPJ4

At t = 0, the current through the 5.00-Ω resistor is 0 A. At t = 2.17×10-2 s, the current through the resistor is -2.2 A, flowing in the opposite direction to the arrow .

(a) At t = 0, the current through the resistor is 0 A.

(b) At t = 2.17×10-2 s, the current through the resistor is -2.2 A. The negative sign indicates that the current is flowing in the opposite direction to the arrow

(c) At t = 3.00 s, the current through the resistor is 0 A.

At t = 0, the current through the 5.00-Ω resistor is 0 A. At t = 2.17×10-2 s, the current through the resistor is -2.2 A, flowing in the opposite direction to the arrow.At t = 3.00 s, the current through the resistor is 0 A.

learn more about current here

https://brainly.com/question/17120024

#SPJ4

Answer:

Initial velocity of the van is 4.95m/s

Explanation:

Acceleration is found using the following formula:
[tex]a=\frac{v-u}{t}[/tex]

where:

a is acceleration ( in meters per second squared)
v is final velocity ( in meters per second)
u is initial velocity ( in meters per second)
t is time ( in seconds)

We know that:
[tex]a = 2.15m/s^{2}[/tex]

[tex]v = 20m/s[/tex]

[tex]t=7s[/tex]

Therefore, we can find the initial velocity by shifting around some values and making [tex]u[/tex] the subject within the acceleration formula by multiplying both sides by [tex]t[/tex]:
[tex]a[/tex] × [tex]t=v-u[/tex]

Followed by:
[tex]u = v-at[/tex]

Now we can substitute in the values we have:
[tex]u = 20-(2.15[/tex] × [tex]7)[/tex]
[tex]u = 20 - 15.05[/tex]

[tex]u=4.95m/s[/tex]

Answer:

The answer would be 52.8m

0.268 because grams are 1000 times bigger than mg

1 milligram = 0.001 grams

268.0mg * 0.001g

[tex]=\fbox{0.268 grams}[/tex]

The pressure at position y to be 10.0, which is the air pressure when the piston is at position y.

If the original pressure in the cylinder was 1.0, and the piston is pulled out from position x to position y without changing the temperature of the enclosed air, the air pressure at position y will be increased. This is due to the change in volume of the cylinder as the piston is pulled out. As the volume increases, the number of air molecules inside the cylinder also increases, which causes an increase in the air pressure.

To calculate the air pressure when the piston is at position y, we can use the gas law known as Boyles' Law, which states that the pressure and volume of a gas are inversely proportional. Therefore, if the volume increases, the pressure will decrease, and if the volume decreases, the pressure will increase.

Where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure, and V₂ is the final volume.

By substituting the given values, we have:

Where V is the change in volume due to the movement of the piston.

Solving for P₂:

As we know, the original pressure is 1.0, and if we multiply it by 10, we will get the final pressure at position y to be 10.0, which is the air pressure when the piston is at position y.

This question is not written in a proper manner. The corrections are:

Learn more about piston–cylinder here: brainly.com/question/24884868

#SPJ4

The correct option is A, After the switch is closed, the top plate of the capacitor eventually becomes positively charged.

A capacitor is a passive device that stores electrical energy in an electric field. It consists of two conducting plates separated by an insulating material such as air, paper, mica, ceramic, or plastic. When a voltage is applied across the two plates, the electric field created between them stores the energy in the form of an electrostatic potential.

When the voltage is removed, the charge stored in the capacitor is slowly discharged, releasing the energy. Capacitors are used in a wide range of applications, from power supplies and signal processing to motor control, filtering, and energy storage. They are also used to smooth out short-term fluctuations in voltage or current and are key components in many types of electronic circuits.

To learn more about Capacitor visit here:

brainly.com/question/12324415  

#SPJ4

When you move a stretched out light spring one end attached to a wall lying in z-axis along z-axis, you get a longitudinal wave and when along x-axis or y-axis, you get a transverse wave.

When you move the free end of the spring along the z axis (the axis along which the spring is stretched), you create a longitudinal wave. This is because the displacement of the spring particles is in the same direction as the direction of wave propagation.

When you move the free end of the spring along the x axis, you create a transverse wave. This is because the displacement of the spring particles is perpendicular to the direction of wave propagation.

When you move the free end of the spring along the y axis, you create a transverse wave. Similarly to x axis, the displacement of the spring particles is perpendicular to the direction of wave propagation.

To know more on longitudinal and transverse wave

https://brainly.com/question/2568525

#SPJ4

The minimum force that allows the window washer to move upward is Mg. The force is in terms of mass and acceleration due to gravity.

Given:

M = Mass of the window washer

g = Acceleration due to gravity

The forces acting are:

Force due to gravity = M × g

Tension in the rope = Force applied by the washer

The net force is zero. Therefore, the tension is:

T - M × g = 0

T = Mg

Hence, the minimum force that allows the window washer to move upward is Mg. The force is in terms of mass and acceleration due to gravity.

To learn more about Force, here:

https://brainly.com/question/13191643

#SPJ12

The maximum height the diving board can be above the water is 52.5m, so that she does not go any faster than 32 m/s when she enters the water.

To determine the maximum height the diving board can be above the water, we can use the equation of motion for a freely falling object:

v^2 = u^2 + 2as

where

v = final velocity (32 m/s)

u = initial velocity (0 m/s)

a = acceleration due to gravity (-9.8 m/s^2)

s = distance fallen (height of diving board above water)

We can rearrange the equation to find the distance fallen (s)

s = v^2/(-2a) - u^2/2a

substituting the values

s = 32^2/(-2*(-9.8)) = 32^2/19.6 = (1024/19.6) = 52.5 m

To know more about acceleration visit:

brainly.com/question/980919

#SPJ4

A circuit with a series connection between a resistor and a capacitor.

To learn more about capacitor refer to:

https://brainly.com/question/21851402

#SPJ4

After another 7.0, its speed is 6.52 m/s. The time it takes a train to accelerate out of a station to 4.8 m/s is 5.2 seconds.

the rate at which an object's location changes in any direction. Speed is defined as the relationship between a distance and the time it takes to travel that distance. Speed is a scalar quantity because it has no magnitude and only a direction.

The rate at which the velocity of a moving object varies is known as acceleration .To calculate the object's speed at a particular time, we must first calculate the acceleration by dividing the speed by the given time. Here's what we do:

acceleration = 4.8 m/s / 5.2 s = 0.92 m/s^2

To determine the velocity after 7.1 s, we multiply 7.1 s to the acceleration.

speed or velocity = 0.96 x 7.0 = 6.44 m/s

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ4

Forces acting upon a 100-kg crate which is sliding down an inclined plane, the plane is inclined at an angle of 30 The coefficient of friction between the crate and the incline is 0.3. the net force of the crate is 230N.

Solution:

Given:

Mass of crate=100kg

Angle of inclination=30°

coefficient of friction=0.3.

Now,

F∥=mgsinθ=(100)(10)0.5=500N is the force acting parallel to the inclined plane.

then,

Normal force= mgcosθ=(100)(10)(0.9)=900N

then, frictional force =

Frictional force=μkF⊥=(0.3)(900)=270N

Finally the net force = F∥-frictional force

the net force =500-270

the net force =230N

Hence, the net force is 230N

To know more about coefficient of friction visit

https://brainly.com/question/8139435

#SPJ1

It's crucial to inspect the brake drums as part of your walk-around examination before setting off on a journey. If any brake drum has a crack that is more than half the breadth of the friction region.

Overheating and undercooling of the brake pedal during operation might result in cracked drums.

Drums with cracks need to be changed right away. Blue ground -High temperatures, braking imbalance, abrupt stops, dragging brakes, or glazed brake pads can all result in blue drums. If no cracks have appeared, blue drums can still be utilized.

To know more about brake drums visit:

brainly.com/question/20895055

#SPJ4

Correct option is A, A heavy truck and a small truck roll down a hill. Neglecting friction, at the bottom of the hill the heavy truck has greater acceleration.

Momentum and mass are directly proportional in direction. This is so because mass times velocity make up the equation for momentum. Another way to express this is as p = m*v, where p stands for momentum, m for mass, and v for velocity. As a result, momentum doubles if mass is increased by a factor of two but velocity remains constant.

p = m v . The equation demonstrates that momentum is directly related to an object's mass (m) and velocity (v). As a result, an object's momentum increases with increasing mass or velocity. The momentum of a large, swift object is larger than that of a small, slower object.

The definition of momentum is "mass in motion." Since every item has mass, if it is moving, it must have momentum because its mass is in motion. The amount of motion and the speed of the motion are the two factors that determine how much momentum an item possesses.

To learn more about momentum from given link

https://brainly.com/question/18798405

#SPJ4

The velocity of the hammer of mass 1.9 kg is 11.07 m/s.

Velocity is the rate of change of displacement.

To calculate the velocity of the hammer, we use the formula below.

Formula:

Where:

Substitute these values into equation 1

Learn more about velocity here: https://brainly.com/question/24445340

#SPJ1

The magnitude of the net displacement for the day depends on the total distance traveled and the direction in which traveled.

What do you mean by Magnitude?

Magnitude is a measure of the size or intensity of a physical quantity. It is typically expressed in terms of a numerical value and a unit. Examples of physical quantities with magnitude include speed, acceleration, force, energy, pressure, and power. Magnitude is a measure of the size or intensity of a physical quantity, and is typically expressed in terms of a numerical value and a unit.

Step 1: Find the resultant displacement vector by adding the vectors.

S total = S morning + S afternoon

= (2100 m , east) + (3000 m north) + (200 m , vertical) + (1400 m , west) + (2900 m , north) - (400 m , vertical)

Step 2: Simplify the vector.

S total = (700 m , east) + (5900 m , north) - (200 m , vertical)

Step 3: Calculate the magnitude of the resultant vector.

|S total | = √(700 m)^2 + (5900 m)^2 + (-200 m)^2

|S total | = √(490000 m^2 + 348400 m^2 + 40000 m^2)

|S total | = √(882400 m^2)

|S total | = 939.4 m

Hence, the magnitude of the net displacement is 939.4 m.

To know more about magnitude,

https://brainly.com/question/29489126

#SPJ4