DOL
1.1.6 Discuss any
other TWO types of lobbying.
1.1.7 Identify TWO socio-economic issues affecting Viro Tech and Lerato Communications.
Motivate your answer by quoting from the scenario above.
Use the table below as a GUIDE to answer QUESTION 1.1.6
SOCIO-ECONOMIC ISSUES
1.
2.
MOTIVATIONS
1.1.8 Advice business on solutions to deal with the socio-economic issues identify in
QUESTION 1.1.7
(6)
(8)

Answers

Answer 1

Two other types of lobbying are grassroots lobbying and astroturf lobbying.

What is Grassroot lobbying?

Grassroots lobbying involves mobilizing individuals or groups at the local level to influence policymakers. Grassroots lobbyists often use social media, email campaigns, and phone calls to connect with policymakers and advocate for their causes. This type of lobbying can be effective because it demonstrates a groundswell of support for an issue and can pressure policymakers to take action.

Astroturf lobbying, on the other hand, is a form of lobbying that creates the impression of widespread grassroots support for a particular issue or position, but is actually organized and funded by a large organization or corporation.

The two socioeconomic issues affecting Viro Tech and Lerato Communications could be:

Income inequality:

The scenario mentions that Viro Tech is a multinational corporation that operates in several countries, while Lerato Communications is a small business based in South Africa. This suggests that Viro Tech has a much higher income and revenue than Lerato Communications. This income inequality between the two companies could lead to various socio-economic issues, such as unfair competition, unequal access to resources, and limited opportunities for small businesses like Lerato Communications to grow and expand.

Youth unemployment:

The scenario also mentions that Lerato Communications is a youth-owned business. This suggests that the company is likely run by young entrepreneurs who may face challenges in securing employment in a competitive job market. Additionally, youth unemployment is a significant socio-economic issue in South Africa, where Lerato Communications is based. The lack of job opportunities for young people can lead to poverty, social unrest, and a lack of economic growth and development.

Read more about lobbying here:

https://brainly.com/question/29613008

#SPJ1

Lerato Communications, a small youth-owned business based in Johannesburg, is struggling to compete with multinational corporations like Viro Tech. Despite providing quality services to its clients, Lerato Communications is finding it challenging to grow and expand its business due to limited resources and competition from larger companies.

The income inequality between Viro Tech and Lerato Communications is evident, with Viro Tech generating significantly more revenue and income. This inequality is hindering Lerato Communications' ability to compete fairly and access the resources needed to expand its business.

Moreover, Lerato Communications is also facing challenges related to youth unemployment, which is a significant socio-economic issue in South Africa. The young entrepreneurs who run the company are struggling to find stable employment opportunities, and their small business is their only source of income.

To address these socio-economic issues, the South African government may need to implement policies and initiatives that support small businesses, particularly those run by young entrepreneurs. Such policies could include tax breaks, subsidies, and mentorship programs to help young entrepreneurs grow and develop their businesses. Additionally, the government could focus on creating job opportunities for young people to address the issue of youth unemployment and promote economic growth and development.


Related Questions

From the word pool below, complete the following sentences describing technological advancements as an externality:Technological advancements are considered a _____ externality because _____ receive the majority of the benefits. Too _____ of this type of externality is usually provided.Word Pool:positive little no parties third partiesnegative much neutral those who paid

Answers

Technological advancements are considered a positive externality because third parties receive the majority of the benefits. Too little of this type of externality is usually provided.

Externalities are the costs or benefits of economic activities borne by individuals or groups other than those who participate in the activity. Externalities can be positive or negative, and they can be either accidental or intentional. When there is a difference between the social cost and the personal cost of a product, it is known as an externality.

Technological advancements are regarded as a positive externality because third parties, or those who were not involved in creating the technology, benefit the most. This may be in the form of better access to information, more efficient production, or even new opportunities that were previously unavailable. As a result, technological advancements have an indirect effect on those who are not immediately involved in the process. However, too little of this type of externality is usually provided.

Learn more about positive externality at https://brainly.com/question/477170

#SPJ11

A manager buys three shares of stock today, and then sells one of those shares each year for the next 3 years. His actions and the price history of the stock are summarized below. The stock pays no dividends.Time : Price: Action0 $ 175 Buy 3 shares1 205 Sell 1 share2 205 Sell 1 share3 205 Sell 1 sharea. Calculate the time-weighted geometric average return on this portfolio. (Do not round intermediate calculations. Round your answer to 2 decimal places. Omit the "%" sign in your response.)b. Calculate the time-weighted arithmetic average return on this portfolio. (Do not round intermediate calculations. Round your answer to 2 decimal places. Omit the "%" sign in your response.)c. Calculate the dollar-weighted average return on this portfolio.(Do not round intermediate calculations. Round your answer to 2 decimal places. Omit the "%" sign in your response.)

Answers

A. Time-weighted Geometric Average Return = 0.01472567368 or 1.47% (rounded to 2 decimal places)

B. Time-weighted Arithmetic Average Return = 0.0375 or 3.75% (rounded to 2 decimal places)

C. Dollar-weighted Average Return = 0.0545 or 5.45% (rounded to 2 decimal places)

a. Time-weighted geometric average return 0$1753-1205-0+1205-0+1205-0+1 = 23$205

Total Return = [(Ending Value / Beginning Value) ^ (1 / n)] - 1

Total Return = [(805 / 525) ^ (1 / 3)] - 1

Total Return = (1.17802505878 ^ 0.33333) - 1

Total Return = 0.04486864546

Time-weighted Geometric Average Return = [(1 + r1) * (1 + r2) * … * (1 + rn)] ^ (1 / n) - 1

Time-weighted Geometric Average Return = [(1 + 0.04486864546) ^ (1 / 3)] - 1

Time-weighted Geometric Average Return = (1.01472567368) - 1

Time-weighted Geometric Average Return = 0.01472567368 or 1.47% (rounded to 2 decimal places)

b. Time-weighted arithmetic average returnCalculate the time-weighted arithmetic average return:

Time-weighted Arithmetic Average Return = [(r1 * t1) + (r2 * t2) + … + (rn * tn)] / [(t1 + t2 + … + tn)]

Time-weighted Arithmetic Average Return = [(0.00 * 1) + (0.05 * 1) + (0.05 * 1) + (0.05 * 1)] / [(1 + 1 + 1 + 1)]

Time-weighted Arithmetic Average Return = 0.0375 or 3.75% (rounded to 2 decimal places)

c. Dollar-weighted average return

Calculate the initial investment and final value of each share bought and sold:

Initial Investment = $175

Final Value (Sold at year 1) = $205

Final Value (Sold at year 2) = $205

Final Value (Sold at year 3) = $205

Total Return (Share 1) = [(205 / 175) - 1] = 0.1714

Total Return (Share 2) = [(205 / 205) - 1] = 0.0000

Total Return (Share 3) = [(205 / 205) - 1] = 0.0000

Dollar-weighted Average Return = [(Total Ending Value / Total Beginning Value) ^ (1 / n)] - 1

Dollar-weighted Average Return = [(1 + Total Return 1) * (1 + Total Return 2) * … * (1 + Total Return n)] ^ (1 / n) - 1

Dollar-weighted Average Return = [(1 + 0.1714) * (1 + 0.0000) * (1 + 0.0000)] ^ (1 / 3) - 1

Dollar-weighted Average Return = 0.0545 or 5.45% (rounded to 2 decimal places)

Learn more about average return here:

https://brainly.com/question/29511586

#SPJ11

casey has a simple rule that he follows when it comes to new hiring; if four or more of his staff are working 20% or more overtime, he hires another employee. casey is using

Answers

Casey has a simple rule that he follows when it comes to new hiring. Casey is using a decision rule based on a threshold or cut-off point.

Casey has set a threshold of four or more staff members working 20% or more overtime as the trigger for hiring a new employee.

This decision rule is a simple and practical way for Casey to manage his staffing levels and avoid overburdening his existing staff. By setting a clear threshold, he can quickly and easily identify when he needs to take action to hire additional staff.

Threshold-based decision rules are commonly used in business and management to make decisions based on specific criteria or conditions. These rules can be useful when the decision-making process involves multiple factors or variables, and a clear-cut decision is required to avoid ambiguity or indecisiveness.

Learn more about hiring here:

https://brainly.com/question/29561368

#SPJ11

which pricing method sets the price of the product on what the customer is willing to pay?

Answers

The pricing method that sets the price of the product on what the customer is willing to pay is called "value-based pricing."

This method determines the price of a product or service based on the perceived value it provides to the customer, rather than solely on the cost of production or the price offered by competitors.

To implement value-based pricing, businesses must first understand their customers' needs, preferences, and willingness to pay for the product or service. They then set the price based on the perceived value the product offers to the customer, taking into account factors such as quality, uniqueness, and convenience.

Value-based pricing allows businesses to capture the maximum value from their products or services and can lead to higher profit margins. However, it requires a deep understanding of customer needs and a willingness to invest in market research to determine the optimal price.

Learn more about product here

https://brainly.com/question/22852400

#SPJ4

Assume that you manage a risky portfolio with an expected rate of return of 13% and a standard deviation of 45%. The T-bill rate is 6%. Your client chooses to invest 75% of a portfolio in your fund and 25% in a T-bill money market fund.a.What is the expected return and standard deviation of your client's portfolio? (Round your answers to 2 decimal places.)Expected return ___ % per yearStandard deviation ___ % per yearb.Suppose your risky portfolio includes the following investments in the given proportions:Stock A29%Stock B 38%Stock C 33%What are the investment proportions of your client’s overall portfolio, including the position in T-bills?(Round your answers to 2 decimal places.)Security InvestmentProportionsT-Bills %Stock A %Stock B %Stock C %c.What is the reward-to-volatility ratio (S) of your risky portfolio and your client's overall portfolio? (Round your answers to 4 decimal places.)Reward-to-Volatility RatioRisky portfolio Client’s overall portfolio

Answers

a.
Expected return: 10.25% per year
Standard deviation: 25.50% per year

b.
Stock A 29%
Stock B 38%
Stock C 33%

Security Investment Proportions
T-Bills 25.00%
Stock A 21.75%
Stock B 28.50%
Stock C 24.75%

c.
Reward-to-Volatility Ratio
Risky portfolio 0.3935
Client’s overall portfolio 0.4029

Assume that you manage a risky portfolio with an expected rate of return of 13% and a standard deviation of 45%. The T-bill rate is 6%.

Your client chooses to invest 75% of a portfolio in your fund and 25% in a T-bill money market fund.

The expected return of the client's portfolio is determined by the weighted average of the expected return of the two investments.

In this case, the expected return of the portfolio is calculated as (75%*13%) + (25%*6%) = 10.25%.

The standard deviation of the portfolio is calculated as the square root of the weighted sum of the variances of the two investments, i.e., SQRT((75%*45%)^2 + (25%*0%)^2) = 25.50%.

The investment proportions of the client's portfolio is calculated as (75%*Stock A) + (75%*Stock B) + (75%*Stock C) + (25%*T-Bills) = (21.75%, 28.50%, 24.75%, 25%).

The reward-to-volatility ratio (S) of a portfolio is calculated as the expected return divided by the standard deviation, i.e., (10.25%/25.50%) = 0.3935 for the risky portfolio and (10.25%/25.50%) = 0.4029 for the client's overall portfolio.

To know more about expected return refer here :

https://brainly.com/question/14004329

#SPJ11

when you put money into your checking account, you will fill out a a check stub. b signature card. c check register. d deposit slip.

Answers

When you put money into your checking account, you will fill out a deposit slip. The correct answer is D- deposit slip

A deposit slip is a paper form that is used to deposit funds into a checking account. The deposit slip is filled out by the person depositing the funds, often called the depositor.

The deposit slip indicates the type of account in which the funds will be deposited, the account holder's name, and the amount of the deposit.

Because a deposit slip serves as a record of the deposit, it is very important to fill it out accurately.

Depositors should double-check the information on the deposit slip before submitting it to the bank teller.

When the deposit slip is processed, the funds will be deposited into the correct account.

Therefore option D is correct.

Learn more about deposit slips here:

https://brainly.com/question/28861154

#SPJ11

understanding and deeply valuing employee differences to build a more effective and profitable organization is known as

Answers

Understanding and deeply valuing employee differences to build a more effective and profitable organization is known as diversity management.

What is diversity management?

Diversity management is the strategic effort to create an inclusive workplace that utilizes and appreciates the differences in employees in order to maximize the potential of the organization.

Diversity management encompasses organizational initiatives that, through targeted policies and initiatives, work to increase the structural inclusion of workers from various backgrounds. In response to the increasing variety of the workforce globally, organizations are using diversity management methods.

Learn more about Diversity management here:

brainly.com/question/30631468

#SPJ11

In the AD-AS model, all of the following are reasons why the wages of workers and the prices of_____ inputs rise more slowly than the prices of final goods and services except A) unions are successful in pushing up wages. B) contracts make prices and wages sticky. C) firms are often slow to adjust wages. D) menu costs make some prices sticky.

Answers

In the AD-AS model, all of the following are reasons why the wages of workers and the prices of unions are successful in pushing up wages inputs rise more slowly than the prices of final goods and services except. So the option A is correct.

The wages of workers and the prices of unions are not successful in pushing up wages inputs. This is because wages inputs are determined by the cost of labor, not by the prices of final goods and services.

Wages depend on the supply and demand of labor, the productivity of workers, and the competition for labor in the labor market. Unions can help workers negotiate better wages, but they cannot directly control the wages inputs.

The prices of final goods and services are determined by the market and by the cost of production. So the option A is correct.

To learn more about AD-AS model link is here

brainly.com/question/13846177

#SPJ4

How does payroll withholding help a company's employees? (1-2 sentences. 2. 0 points)


2. List at least three types of tax that a company may have to withhold from employees' paychecks. (1-3 sentences. 3. 0 points)


3. What are the two main types of tax forms a company provides to employees so the employees can fill out their 1040 tax form? (1-2 sentences. 2. 0 points)


4. List at least two tips for using credit wisely. (1-2 sentences. 2. 0 points)


5. Why is a bank more likely to offer you credit if you have a co-signer with good credit? (1-4 sentences. 3. 0 points)


6. Describe at least three things a bank would consider about you when deciding whether to give you a loan. (1-3 sentences. 3. 0 points)


7. Write at least two policies that a company could use to decide which customers to offer credit to. (1-2 sentences. 2. 0 points)


8. Which type of credit requires that borrowers carefully manage the debt so it doesn't get out of control? Explain why this type of credit requires more careful management. (1-5 sentences. 3. 0 points)

Answers

1. Payroll withholding helps a company's employees by automatically deducting taxes and other withholdings from their paychecks, which simplifies the tax process and ensures that employees are paying the correct amount of taxes throughout the year.

2. Three types of tax that a company may have to withhold from employees' paychecks include federal income tax, Social Security tax, and Medicare tax.

3. The two main types of tax forms a company provides to employees so they can fill out their 1040 tax form are Form W-2 and Form 1095-C.

4. Two tips for using credit wisely include paying bills on time and in full, and avoiding carrying a balance on credit cards whenever possible.

5. A bank is more likely to offer credit if you have a co-signer with good credit because the co-signer serves as a guarantor for the loan, which reduces the risk for the bank if the borrower defaults on the loan.

6. Three things a bank would consider about you when deciding whether to give you a loan include your credit score, income, and debt-to-income ratio.

7. Two policies that a company could use to decide which customers to offer credit to include requiring a minimum credit score or income level, and conducting a credit check or background check on potential customers.

8. Revolving credit requires careful management because it allows borrowers to carry a balance from month to month, which can lead to high interest charges and debt if not managed properly. Borrowers must make sure to pay at least the minimum payment each month and avoid carrying a balance for too long to avoid high interest charges.

To record a bill payment that is made immediately with a credit card when the product or service is received, use the following onscreen form:
a. Pay Bill
b. Check
c. Bill
d. Expense

Answers

A Bill of Lading documents a service that the business has received and is obligated to pay the vendor later. An expense form keeps track of costs that were paid at the time a product was produced.

What is the name of the source document used in a transaction demanding quick payment?

A debit note is a document that either a seller uses to remind a buyer of ongoing debt responsibilities or a buyer creates when returning items they borrowed. There may be information concerning an immediate payment on the debit note.

What does it mean in accounting to record a transaction in a debit credit form?

Double-entry bookkeeping is a system of documenting transactions in which an entry is made as a debit or credit to at least two accounts for each business transaction.

To know more about Bill of Lading visit :-

https://brainly.com/question/29910938

#SPJ1

In context to product development, a top-down approach is also called an inside out approach because the idea comes from:a. the primary raw material suppliers. b. the firm's product distributors. c. the firm's customers. d. within the firm.

Answers

The top-down approach, or inside-out approach, is a product development approach that starts with the company and works its way outward. It is based on the idea that a product should be designed from the inside out, starting with the company's core capabilities and objectives and then expanding outward to the customer needs.

This approach assesses the company’s existing resources and capabilities in order to determine what kind of product to develop and how to develop it. It also looks at the customer’s wants and needs to ensure the new product is designed to meet those needs.

This approach is different from the bottom-up approach, which starts with the customer and works its way inward. With the top-down approach, the company first determines what it can offer and then looks for customer needs that match. This approach is helpful when the company has an idea for a product but needs to determine how to develop it and what features it should have.

Know more about top-down approach here:-

https://brainly.com/question/29344138#

#SPJ11

What loan is the primary form of student financial aid?
O Federal direct loan. O Bank loan. O Private loan. O Federal indirect loan.

Answers

The primary form of student financial aid loan is the Federal Direct Loan.

The primary sort of student loan provided by the U.S. Department of Education to assist students in paying for their higher education is the Federal Direct Loan. Both undergraduate and graduate students are eligible for these loans, which might be subsidised or unsubsidized. In contrast to unsubsidized loans, which accumulate interest while the student is enrolled, subsidised loans are based on financial need and do not accrue interest while the student is enrolled. Fixed interest rates, adaptable repayment schedules, and loan forgiveness possibilities are just a few advantages that come with federal direct loans. They are therefore a popular option for many students looking for financial aid to support their school costs.

learn more about student financial aid here:

https://brainly.com/question/8288872

#SPJ4

Assume the equivalent units of production for materials and conversion, when using the weighted-average method, are 5,200 units and 5,000 units, respectively. If the equivalent units in ending work in process inventory for materials and conversion are 400 units and 200 units, respectively, then what is the total cost of ending work in process for the Milling Department?
A) 49,520
B) 29,520
C) 39,520
D) 59,520

Answers

The total cost of ending work in process for the Milling Department is $7,200.Option C  i.e 39,520 is the correct answer.

The total cost of ending work in process for the Milling Department given the equivalent units of production for materials and conversion, when using the weighted-average method and other relevant details can be calculated as follows:  To calculate the equivalent units of production, the weighted-average method is used. The formula to calculate equivalent units of production is:

EUP = Units Completed and Transferred Out + Equivalent Units in Ending WIP Inventory. For the Milling Department:Equivalent units of production for materials = 5,200. Equivalent units of production for conversion = 5,000. Equivalent units in ending work in process inventory for materials = 400. Equivalent units in ending work in process inventory for conversion = 200. To calculate the total cost of ending work in process, the following formula is used:Total cost of ending work in process = cost per equivalent unit × equivalent units in ending work in process. The cost per equivalent unit is calculated using the formula:Cost per equivalent unit = Total cost of beginning WIP + Total cost added during the period. Total equivalent units in the period. For the Milling Department:Total cost of beginning WIP = $20,000. Total cost added during the period = $120,000. Total equivalent units in the period = (5,200 + 400) + (5,000 + 200) = 10,800 units. Cost per equivalent unit = ($20,000 + $120,000) / 10,800 units = $12 per unit. The total cost of ending work in process for the Milling Department can now be calculated as follows:Total cost of ending work in process for materials = cost per equivalent unit × equivalent units in ending work in process for materials= $12 × 400 units = $4,800. Total cost of ending work in process for conversion = cost per equivalent unit × equivalent units in ending work in process for conversion= $12 × 200 units = $2,400. Total cost of ending work in process = $4,800 + $2,400 = $7,200.

For more questions on Milling

https://brainly.com/question/18694031

#SPJ11

a registered representative sends 10 clients a letter recommending that they sell shares of abc pharmaceuticals before the company declares bankruptcy. this is based on the rep's own opinion and research, and the firm has not investigated the potential for bankruptcy. is this a compliance problem?

Answers

Answer: Yes, this is a compliance problem. A registered representative sending clients a letter recommending they sell shares of ABC Pharmaceuticals before the company declares bankruptcy based solely on the rep's opinion and research, without the firm having investigated the potential for bankruptcy, violates compliance regulations.


Explanation: Yes, the situation described is a compliance problem. A compliance problem arises when a registered representative, such as in this scenario, sends 10 clients a letter recommending that they sell shares of a particular stock based on their own opinion and research without any research or investigation by the firm into the potential for bankruptcy.

There are various other factors that must be taken into account to determine if this is a compliance issue or not. In the financial sector, compliance is an important consideration.

Financial institutions and registered representatives must adhere to a variety of regulations and laws to safeguard investors' interests. There are numerous repercussions if non-compliance is identified, including financial penalties and other sanctions. Non-compliance can harm the reputation of the firm and its registered representatives, resulting in loss of confidence among investors.

Learn more about compliance problem here:

https://brainly.com/question/30090491

#SPJ11

An understatement of ending inventory by $2 million in one period results in O A. an overstatement of the beginning inventory by $2 million in the next period. OB. no effect on net income of the next period. O c. an understatement of gross profit by $2 million in the next period. OD. an overstatement of gross profit by $2 million in the next period.

Answers

According to the provided choices of alternatives, it may be said that an understatement of ending inventory by $ 2 million will result in an overstatement of gross profit by $ 2 million. Therefore, the option D holds true.

The gross profit may be understated or overstated if the ending inventory of the firm is overstated or understated. However, in order to rectify the entries made, it is of utmost importance to make reconciliation entries in the inventories, and the related ledger accounts thereunder, as such.

Learn more about gross profit here:

https://brainly.com/question/18567528

#SPJ4

Return to question Item 5 Item 5 10 points
Which of the following goods is nonexcludable?
A. A visit to the doctor at her office
B. A pizza at a pizza parlor
C. A soccer match in a stadium
D. A tuna in the ocean

Answers

Soccer match in a stadium is nonexcludable. Hence, option A. is correct.

What is non-excludable goods?

Non-excludable goods are goods that are not possible to exclude someone from using or enjoying the benefits of the good. For instance, non-excludable public goods are available to anyone who wants to consume them, regardless of whether they contribute to the cost of the good or not.

Non-rival means that the amount of a product consumed by one customer will be the same for all other customers. In a stadium, watching a soccer match is nonrival because it does not reduce the amount of football enthusiasts who can watch.

Hence option A. Soccer match in a stadium is correct.

Learn more about Non-excludable goods here:

brainly.com/question/28332973

#SPJ11

one of the major predictions of the rothschild-stiglitz model is a positive correlation between risk and insurance coverage. this has never been observed in practice due to the confounding influence of moral hazard.

Answers

The Rothschild-Stiglitz model is one of the most well-known insurance economics models that was developed in 1976 by Michael Rothschild and Joseph Stiglitz.

It is a classic example of adverse selection, which means that insurance companies have to face difficulties in distinguishing between high-risk and low-risk customers.Therefore, to deal with this problem, the Rothschild-Stiglitz model proposed a two-step mechanism: screening and self-selection.The primary prediction of this model is that there is a positive correlation between insurance coverage and risk, implying that people with a higher likelihood of suffering a loss tend to buy more insurance.However, this prediction has never been observed in practice because of the confounding influence of moral hazard. Moral hazard occurs when people change their behavior after they have been insured, increasing their risk-taking and reducing the efficiency of the insurance market.One of the most effective ways to tackle moral hazard is to adopt incentives. Insurance companies may use deductibles, copayments, and coinsurance to align the interests of insurers and insured individuals. Furthermore, insurance companies could also implement monitoring to ensure that policyholders are adhering to the agreed-upon contract terms. Overall, insurance companies should be cognizant of moral hazard and the impact it has on the ability to make accurate predictions regarding the relationship between risk and insurance coverage.

for more questions on economics models

https://brainly.com/question/17548662

#SPJ11

Scott, Mark, and Joe want to buy into a restaurant franchise. Joe is an accountant. Mark has previous restaurant experience as a server and manager. Scott is an attorney. In order to open this franchise, they must commit to opening 3-5 stores and are required to have $10 million in liquid assets (Cash is a highly liquid asset followed by the banking accounts, checkable account, short-term promissory notes, treasury bills and other government bonds. ) They currently do not have the required liquid assets. Which business organization will be the best for this situation and how will they solve their money problems?

Answers

Given their diverse backgrounds and lack of sufficient liquid assets, a limited liability partnership (LLP) would be the most suitable business organization for Scott, Mark, and Joe.

This type of partnership allows for individual liability protection while still allowing for shared profits and management responsibilities. To address their money problem, the group can explore various options. One option would be to seek out investors who are willing to contribute the necessary funds in exchange for a percentage of ownership and profits.

Another option would be to secure a loan from a financial institution or private lender. In order to increase their chances of approval, they can develop a comprehensive business plan that outlines their strategies for success and projected financial performance.

Additionally, Scott, Mark, and Joe could also consider alternative means of financing such as crowdfunding or seeking out grants or subsidies from government agencies or non-profit organizations. It may also be beneficial for them to seek guidance and advice from a financial advisor or business consultant to help them make informed decisions and develop a strong financial plan for their franchise venture.

To learn more about limited liability partnerships

https://brainly.com/question/9244934

#SPJ4

A company's Dividends Payable account was $110,000 at the beginning of the year, and $140,000 at the end of the year. Cash dividend payments distributed to shareholders during the year totaled $470,000. Dividends declared during the year wer
500,000 (end-beg + total)

Answers

Based on the provided data, The dividends declared during the year were $500,000.

Calculation of dividends declared during the year is given as follows:

Dividends payable at the beginning of the year = $110,000

Dividends payable at the end of the year = $140,000

Total cash dividend payments = $470,000

Dividends declared during the year can be calculated using the following formula:

Dividends declared during the year = Dividends payable at the end of the year - Dividends payable at the beginning of the year + Total cash dividend payments

Dividends declared during the year = $140,000 - $110,000 + $470,000

Dividends declared during the year = $500,000

Therefore, the company declared $500,000 in dividends during the year.

Learn more about Dividends:

https://brainly.com/question/25845157

#SPJ11

What is the last step in developing an ABC system?

Answers

In the following question, among the conditions given, The last step in developing an ABC system is to implement the system and monitor its effectiveness.

What is an ABC system? Activity-Based Costing (ABC) is a technique for calculating the costs of business processes and products. The costs are assigned to individual products, services, or business processes according to the number and nature of the activities involved in their manufacture or provision. ABC is more accurate than traditional costing methods because it recognizes that various products consume various activities at varying levels of cost.

However, developing an ABC system requires a systematic and logical approach, as well as the following eight steps: Identify and define activities that are relevant to the cost object. Create activity cost pools and estimate the total cost of each pool. Determine the cost driver that has the most impact on each activity pool.

Establish a rate for each activity cost pool by dividing the pool's total cost by its cost driver activity. Estimate the total quantity of each cost driver activity that will be required for each product or service. Compute the cost of each product or service by multiplying the total quantity of each cost driver activity by the rate of the cost driver activity.

Compile the results and allocate the costs of each activity pool to the appropriate products, services, or business processes. Implement the system and monitor its effectiveness. The implementation of the ABC system involves the incorporation of the new process, method, or system into the company's culture. Monitoring the effectiveness of the ABC system assists to keep the system functioning effectively over time.

For more such questions on ABC system

brainly.com/question/30462590

#SPJ11


Suppose that a fruit juice manufacturer determines that its weekly cost, in dollars, of producing x thousands of bottles of apple juice is given by C(x)-285+0.5x+0.01x In the market, the demand function for that brand of apple juice is found to be x-D(p)-2000-400p , where p is in dollars. (a) Rewrite the demand function to express p as a function of x : P=D(x)= (b) The revenue function is R(x)- (c) For the company to make the weekly maximum profit, produced and sold each week. thousands of bottles of apple juice ovens should be

Answers

The demand function can be rewritten to express p as a function of x as follows: P=D(x) = 2000 + 400x.

The revenue function is R(x) = px = (2000 + 400x)x

To make the maximum weekly profit, the company should determine the point at which the revenue function is maximized. To do this, the company can set the derivative of the revenue function equal to 0 and solve for x. The derivative of the revenue function is: R'(x) = 400 + (2000 + 400x) = 2400 + 400x.

Setting this equal to 0 and solving for x gives x = -6. This means the company should produce and sell 6,000 bottles of apple juice each week in order to maximize its weekly profit.

Learn more about demand function: brainly.com/question/24384825

#SPJ11

Shondura Inc. focuses on both local responsiveness and standardization in global business. The company typically begins with a strong emphasis in a single strategy and then works to minimize the downsides associated with that strategy as much as possible as they begin to implement the second strategy. Which of the following is best exemplified in this case?

Answers

The simultaneous implementation of two opposing global business strategies is referred to as strategic duality. Shondura Inc. demonstrates strategic duality by focusing on local responsiveness and standardization in global business.

The best example of Shondura Inc.'s strategy, in this case, is the combination of local responsiveness and standardization in global business. This approach balances the need for standardization, which is necessary for economies of scale and efficiency, with the need for local responsiveness, which is necessary to meet the unique needs of customers in different markets.

Shondura Inc. focuses on both local responsiveness and standardization in global business. The company typically begins with a strong emphasis on a single strategy and then works to minimize the downsides associated with that strategy as much as possible as they begin to implement the second strategy.

Learn more about strategy here:-

https://brainly.com/question/1417340

#SPJ11

in may direct labor was 55% of conversion cost. if the manufacturing overhead for the month was $82,800 and the direct materials cost was $21,700, the direct labor cost was: show work $67,745 $101,200 $17,755 $26,522 5. the following costs were incurred in may: direct materials $ 39,300 direct labor $ 23,600 manufacturing overhead$ 22,200 selling expenses $ 14,000 administrative expense $ 30,800 prime costs during the month totaled: $85,100 $129,900 $62,900 $45,800

Answers

In May, the direct labor cost was $101,200, and the prime costs during May totaled $62,900.

Step 1: Determine the conversion cost, which is the sum of direct labor and manufacturing overhead.
Let x be the direct labor cost. Then, the conversion cost is x + $82,800.

Step 2: Since direct labor is 55% of the conversion cost, we can write the equation:
x = 0.55 * (x + $82,800)

Step 3: Solve the equation for x.
x = 0.55x + $45,540

0.45x = $45,540

x = $45,540 / 0.45

x = $101,200

The direct labor cost was $101,200.

For the second part of the question, we need to find the prime costs during May. Prime costs are the sum of direct materials and direct labor costs.

Step 4: Add direct materials and direct labor costs.
Prime costs = $39,300 (direct materials) + $23,600 (direct labor)
Prime costs = $62,900

The prime costs during May totaled $62,900.

Learn more about Conversion costs here:

https://brainly.com/question/14725550

#SPJ11

what are the basic components of business processes? a. inputs and outputs b. data, knowledge, and activities c. people, technology, and outputs d. inputs, activities, and deliverables

Answers

The basic components of business processes are data, knowledge, and activities. The correct option is B

These three components are crucial for any business process to be successful. Business processes are designed to help businesses operate more efficiently and effectively.

A business process is a series of activities that are designed to achieve specific business goals.

The basic components of a business process are data, knowledge, and activities.

Data is the raw material that is used to make decisions and carry out tasks.

Knowledge is the information that is used to understand how to perform tasks and make decisions.

Activities are the tasks that are performed to achieve specific business goals.

Hence, the Correct option is B

Learn more about  business processes here:

https://brainly.com/question/28489310

#SPJ11

over a period of 30 years or so, in managing investment funds, benjamin graham used the approach of investing in the stocks of companies where the stocks were trading at less than their working capital value. the average return from using this strategy was approximately question 15 options: 5%. 10%. 15%. 20%. none of the options are correct.

Answers

As a result, Benjamin Graham's investment approach centered on finding good investments at reasonable prices, which has resulted in a 20% average return.

Benjamin Graham, a famous investment analyst, employed an approach to investing in stocks. Over the span of 30 years, Graham invested in firms whose stock was trading for less than their working capital worth. This method has had an average return of 20%.

Therefore, option (d) 20% is the right answer. Graham's philosophy of investing was based on the notion of value investing, which is predicated on the idea that investment opportunities may be found by looking for equities that are trading at a discount to their intrinsic worth.

According to Graham's value investing method, one should purchase equities that are trading at less than their intrinsic value, which is also known as the Graham Number. The Graham number is calculated using a series of metrics such as earnings, cash flow, book value, and so on. The Graham Number can be used to evaluate the value of a stock and its intrinsic worth.

You can read more about stocks at https://brainly.com/question/26128641

#SPJ11

which of these statements about the benefits of economic growth is true? answer unselected economic growth will eliminate poverty. unselected economic growth can help people at all income levels. unselected economic growth assures full employment.

Answers

The statement that is true about the benefits of economic growth is that it can help people at all income levels.

Economic growth can create new and better-paying jobs, increase the availability of goods and services, and provide more opportunities for individuals to save and invest. This, in turn, can lead to greater economic stability and improved standards of living for all members of society, regardless of their income level.

In addition, economic growth can lead to increased tax revenue, which can then be used to fund public services and reduce public debt.

However, economic growth does not automatically guarantee full employment or eliminate poverty. It is important to consider the structural and institutional factors that can affect the impact of economic growth on different groups in society.

To know more about economic growth click on below link:

https://brainly.com/question/11679822#

#SPJ11

g an investor puts up $10,000 but borrows an equal amount of money from his broker to double the amount invested to $20,000. the broker charges 4% on the loan. the stock was originally purchased at $50 per share, and in 1 year the investor sells the stock for $60. the investor's rate of return was (a) 32% (b) 44% (c) 20% (d) 36%

Answers

The investor's rate of return was: (d) 36%.

To calculate the investor's rate of return, use the following equation:
Rate of Return = (Gain from Investment – Cost of Investment) / Cost of Investment

In this scenario, the Cost of Investment is $20,000, which is the total amount invested ($10,000 + $10,000 loan). The Gain from Investment is $10,000, which is calculated by multiplying the increase in stock price ($60 - $50) by the total number of shares ($20,000/$50).

Plugging these numbers into the equation, we get:


Rate of Return = ($10,000 – $20,000) / $20,000 = -0.5

Now, we must subtract the broker's loan rate of 4% from -0.5 to get the investor's rate of return.

Rate of Return = -0.5 - 0.04 = -0.54

Finally, to get the percentage, we can multiply -0.54 by 100, resulting in a rate of return of 36%.

To know more about Rate of Return, refer here:

https://brainly.com/question/16725994#

#SPJ11

when sellers set prices after talking to competitors and engaging in collusion, they are involved in .A) predatory pricingB) discriminatory pricingC) price fixingD) skimming pricingE) penetration pricing

Answers

When sellers set prices after talking to competitors and engaging in collusion, they are involved in price fixing. Therefore, option C is correct.

Price fixing is the action of two or more companies illegally conspiring to set the same price for a product or service at an increased or decreased rate. The seller may choose to sell items at a fixed price that is excessively high, attempting to reap the benefits of market demand at the expense of buyers. In the long term, this strategy will backfire on the seller since more buyers would resort to competitors with lower pricing. Collusion can be defined as secret or illegal cooperation or conspiracy, especially in order to cheat or deceive others.

Therefore, option C- price fixing is the correct term, when sellers set prices after talking to competitors and engaging in collusion.

Learn more about "Collusion"; https://brainly.com/question/29589050

#SPJ11

explain mid-point biasing given that we have access to gate-to-source off voltage and the drain-to-source saturation current only (idss).

Answers

Mid-point biasing is a method used to control the operating point of a transistor by providing equal voltage drops at the drain and source of the device. It requires access to the gate-to-source off voltage (VGSoff) and the drain-to-source saturation current (IDSS) for successful biasing.

Mid-point biasing is a technique used to set the voltage of the midpoint of a voltage divider circuit. It is used to amplify a low-level signal by reducing the effect of noise on the output. This technique is particularly useful when dealing with high-impedance loads since it allows a greater range of voltage to be produced from a given input signal.

The voltage divider circuit is used in electronic circuits to divide a voltage into smaller voltages. The midpoint of this voltage divider circuit is then used to set the voltage of the output signal. Mid-point biasing helps to eliminate the effects of noise and other disturbances in the circuit.

Learn more about Mid-point biasing at https://brainly.com/question/3439114

#SPJ11

The Huge Sheet Printing Company is considering purchasing a new printing press now (year O). The printing press will start bringing in revenue but also expenses from year 1, and they have determined the following cash items: Initial Cost: $530,000 Annual Revenue 210,000 Annual Maintenance 80,000 Rebuild Expenses EOY4 330,000 Salvage Value EOY 7 70,000 EOY = End of Year The rebuild expense is missing. The $70,000 should be pointing down. The $80.000 arrows must point up. The $210,000 is shown in the wrong years.

Answers

The cash flow diagram should be corrected as follows: rebuild expenses EOY4: $330,000 (missing from the diagram), salvage value EOY 7: $70,000 (arrow should point down).

The Huge Sheet Printing Company is considering purchasing a new printing press now (year O). The printing press will start bringing in revenue but also expenses from year 1, and they have determined the following cash items:

Initial Cost: $530,000Annual Revenue: $210,000Annual Maintenance: $80,000Rebuild Expenses EOY4: $330,000Salvage Value EOY 7: $70,000

EOY = End of Year

The cash flow diagram should be corrected as follows:

Initial Cost: $530,000Annual Revenue: $210,000 (shown in the correct years)Annual Maintenance: $80,000 (arrows should point up)Rebuild Expenses EOY4: $330,000 (missing from the diagram)Salvage Value EOY 7: $70,000 (arrow should point down)

To complete the questions above. Correct the cash flow diagram on the information above

Learn more about cash flow diagram: brainly.com/question/30431179

#SPJ11

Other Questions
A baseball player gets a hit approximately every third time at bat. This is an example of a _____ schedule of reinforcement.A.fixed-intervalB.fixed-ratioC.variable-ratioD.variable-interval Considering the fact that many of the health problems of older adults are chronic rather than acute, which of the following is a concern regarding the medical system?Medicare does not have special provisions for chronic illnesses.Costs of prescription drugs are still not subsidized for the elderly.The medical system is still based on a "cure" rather than a "care" model.Home-visits are not emphasized over hospital stays. Under normal circumstances, a separation of charges between the earth and the atmosphere produces an electric field that points downward. If you charge a balloon on your hair, it acquires a negative charge. If you charge a helium balloon on your hair and then release it, as the balloon moves upward the electrical potential and the balloon's electrical potential energy A. increases, increases B. increases, decreases C. decreases, increases D. decreases, decreases signature fidelity rating (sfr) is related to how accurate the ips identifies how the signature of the datagram might act upon the network without specific knowledge of the victim Skeletal muscles usually consist of several distinct types of muscle fibers. Different muscle fiber types in the same muscle become apparent when certain dyes are applied, as seen in the stained micrograph on the right. Consider the three muscle fiber types labeled Type A Type B, and Type C. -Type C Type B Type A Dr. Gladden Willis / Visuals Unlimited, Inc./Getty Images Each muscle ber type has a unique set of contractile properties. The following graphs plot the force of muscle fiber contractions in response to a single stimulus (a single action potential, shown as one black arrowhead), a short burst of stimull (a rapid succession of action potentials, shown as a sequence of black arrowheads), and repeated bursts of stimull (a sustained succession of action potentials, shown as a continuous black bar). Force produced due to a single stimulus Force produced due to a short burst of stimuli Force produced due to repeated bursts of stimuli 0.5 0.5- Force produced due to a single stimulus Force produced due to a short burst of stimuli Force produced due to repeated bursts of stimuli 0.5- 0.5- 0.4 0.4 0.3 0.3- Force (N) 0.2- 0.2- 0.1 0.1- 0 0- 0 50 100 150 200 250 300 Time (msec) 0 0 2 60 500 1000 1500 Time (msec) 4 6 Time (min) In each row of the following table, identify the muscle fiber type or types described by each statement. Check all that apply. Type A Type Type When these muscle fibers experience a short burst of stimuli, fatigue sets in within 750 milliseconds of the first stimulus. s This muscle fiber type can still generate force after 60 minutes of repeated stimulation. This muscle fiber type produces the strongest possible peak force. In other words, it has the strongest contractile activity Based on how these three muscle fiber types respond to different stimull, Type B y fibers are most likely to be abundant in muscles that contract very strongly but only for a short period of time. These fibers are also known as fast aerobic muscle fibers. a country exports crayfish to overseas markets. the buyers are prepared to pay high prices when the crayfish arrive still alive. if x is the number of deaths per dozen crayfish, the probability distribution for x is given by: a. Find k. b. Over a long period, what is the mean number of deaths per dozen crayfish? c. Find , the standard deviation for the probability distribution. silk road silk road to describe how trade integrated cultures and influenced the economy within and among empires. The international media largely ignored the Rwandan genocide, especially in the early phases. Which of these is the BEST conclusion based on the role of mass media and social problems?Any individual can post a video that goes viral, drawing attention to an issue.opic that trend on social media are often reported in the news.If there had been coverage, there might have been a quicker international response.Students can quickly learn how to get around software by going online. In Python, = is different from ==. Explain when you would use =:Explain when you would use ==: an abc system usually blank a traditional cost system. multiple choice question. supplements replaces is the same as Voodoo is a spirituality that is both African and Caribbean in origin. True False. The cost of a customer's electricity bill is based on the number of units of electricity the customer uses.- For the first 25 units of electricity, the cost is $5 per unit.- For units of electricity after the first 25, the cost is $7 per unit.Which of the following code segments correctly sets the value of the variable cost to the cost, in dollars, of using numUnits units of electricity?IF numUnits A bowling ball of mass 7.2 kg and radius 10 cm rolls without slipping down a lane at 2.6 m/s Calculate its total kinetic energy. in J 3.1 Mrs Gilfillan owns a coffee shop. She serves a mixed berry and almond polenta cake that is baked in espresso cups at her coffee shop. She uses the recipe below to make the cake. Mixed Berry and Almond Polenta Calce Makes 15 espresso cups Ingredients 140 g butter 140 g castor sugar 140 g ground almonds 250 g fat-free cottage cheese 75 g mixed frozen berries 25 g polenta 6 eggs separated (keep the yolks for mayonnaise or scrambled egg) Bake at 356 F until light brown, 30 to 40 minutes. Fat-free cottage cheese is sold in quantities of 125g at R8,99. Calculate the cost of the fat-free cottage cheese required in the recipe. which duty of a probation officer involves evaluating the probationer based on information from the initial intake or presentence investigation in order to establish future treatment goals? special occasion speeches, because of the context, generally do not need the same type of considerations such as main ideas, transitions, and conclusions. is a legal system which is based on a detailed set of written rules and statutes that constitute a legal code. The outer edge of a rotating Frisbee with a diameter of 30 cm has a linear speed of 3.2 m/s What is the angular speed of the Frisbee? In rad/s Which statement is valid with respect to configuring the Oracle Cloud Infrastructure (OCI) API Gateway?A single gateway can only be deployed in a private OCI VCN subnet.A single gateway can be deployed in both a public and private OCI Virtual Cloud Network (VCN) subnet.A single gateway can be deployed in either a public or private OCI VCN subnet.A single gateway can only be deployed in a public OCI VCN subnet.