Trans-oleic acid has a higher melting point than cis-oleic acid and a triacylglycerol containing three residues of stearic acid yields more energy upon oxidation compared to one containing three residues of linolenic acid.
Trans-oleic acid has a higher melting point than cis-oleic acid. This is because the trans configuration results in a more linear structure, allowing the molecules to pack more closely together, leading to stronger intermolecular forces and a higher melting point.
A triacylglycerol containing three residues of stearic acid yields more energy upon oxidation compared to one containing three residues of linolenic acid.This is because stearic acid is a saturated fatty acid, which means it has a higher carbon-to-hydrogen ratio, leading to more energy release upon oxidation. Linolenic acid, on the other hand, is an unsaturated fatty acid and has a lower carbon-to-hydrogen ratio, resulting in less energy release upon oxidation.
For more questions on Trans-oleic acid:
https://brainly.com/question/14974487
#SPJ11
Trans-oleic acid has a higher melting point than cis-oleic acid. Three residues of stearic acid yield more energy on oxidation than three residues of linolenic acid due to the higher number of carbon atoms and absence of double bonds.
Trans-oleic acid has a higher melting point than cis-oleic acid due to its straighter shape, which allows for closer packing and stronger intermolecular forces. In contrast, cis-oleic acid has a kink in its structure due to the cis double bond, which results in weaker intermolecular forces and a lower melting point.
Stearic acid has a higher number of carbon atoms (18) and lacks double bonds, making it a saturated fatty acid. Saturated fatty acids can pack more closely together, resulting in stronger intermolecular forces and a higher energy yield upon oxidation. In contrast, linolenic acid is an unsaturated fatty acid with three double bonds, making it a polyunsaturated fatty acid. The presence of double bonds causes kinks in the fatty acid chains, making it more difficult for them to pack together, resulting in weaker intermolecular forces and a lower energy yield upon oxidation.
Learn more about Trans-oleic acid here :
brainly.com/question/14974487
#SPJ11
The volume occupied by 0.4g of hydrogen gas at S.T.P is ________
{H=1.00, Molar volume at S.T.P =22.4dm^3
Answer:
4.48 dm^3
Explanation:
As given in the problem, the conversion factor for the molar volume of all gases is 22.4 dm^3/mole at STP. A mole of all ideal gases will occupy 22.4 liters (dm^3). Calculate the moles of hydrogen contained in 0.4 grams of the gas by dividing the mass by the molar mass of H2. H2 has a molar mass of 2 grams/mole.
(0.4 g)/(2 grams/mole) = 0.2 moles H2
(0.2 moles H2 at STP)*(22.4 dm^3/mole at STP) = 4.48 dm^3 (4.48 liters at STP)
A compound has an empirical formula of CH₂O. What is its molecular formula, if its molecular mass is 90 g/mol?
(C=12.01 amu, H=1.008 amu, O=16.00 amu)
A: C3H6O3
B: C9H1809
i need help asap, will give brainliest and 50 points, as this is on my final :)
Empirical formula mass
[tex]\\ \tt{:}\dashrightarrow 12+2+16[/tex]
[tex]\\ \tt{:}\dashrightarrow 30g/mol[/tex]
n:-
[tex]\\ \tt{:}\dashrightarrow \dfrac{Molecular\:mass}{Empirical\:mass}[/tex]
[tex]\\ \tt{:}\dashrightarrow \dfrac{90}{30}[/tex]
[tex]\\ \tt{:}\dashrightarrow 3[/tex]
Molecular formula
[tex]\\ \tt{:}\dashrightarrow n\times Empirical\: formula [/tex]
[tex]\\ \tt{:}\dashrightarrow 3(CH_2O)[/tex]
[tex]\\ \tt{:}\dashrightarrow C_3H_6O_3[/tex]
Explain one way that God showed precision in his creation. (use complete sentences)
One way in which God showed precision in his creation was his mighty love on the he has on his creation
The book of John made us to know that: For God do love the world that he gave his only begotten son that whosoever believeth in him shall not perish but have everlasting life.
What is creation?Creations is the art of producing or making something out of something
So therefore, one way in which God showed precision in his creation was his mighty love on the he has on his creation
Learn more about God's creation:
https://brainly.com/question/14833222
#SPJ1
What is the balanced chemical reaction for Mg+H2=MgH, K+O2= KO, K+S= KS, Ba + Br2= BaBr, Ca + N2= CaN
(Giving brainliest for the answer that shows work) Please and thank you!
Answer:
1.) 2 Mg + H₂ ------> 2 MgH
2.) 2 K + O₂ -----> 2 KO
3.) K + S -----> KS
4.) 2 Ba + Br₂ -----> 2 BaBr
5.) 2 Ca + N₂ ------> 2 CaN
Explanation:
An equation is balanced when there is an equal amount of each element on both sides of a reaction. If there is an unequal amount, they can be altered by adding coefficients which modify the amount of an element/molecule. It is important that the coefficients are as small as possible while staying as whole numbers.
1.) ------------------------------------------------------------------------------------------------------
The unbalanced equation:
Mg + H₂ -----> MgH
Reactants: 1 magnesium, 2 hydrogen
Products: 1 magnesium, 1 hydrogen
The balanced equation:
2 Mg + H₂ ------> 2 MgH
Reactants: 2 magnesium, 2 hydrogen
Products: 2 magnesium, 2 hydrogen
2.) ------------------------------------------------------------------------------------------------------
The unbalanced equation:
K + O₂ -----> KO
Reactants: 1 potassium, 2 oxygen
Products: 1 potassium, 1 oxygen
The balanced equation:
2 K + O₂ -----> 2 KO
Reactants: 2 potassium, 2 oxygen
Products: 2 potassium, 2 oxygen
3.) ------------------------------------------------------------------------------------------------------
The unbalanced equation:
K + S -----> KS
Reactants: 1 potassium, 1 sulfur
Products: 1 potassium, 1 sulfur
This equation is already balanced with all the elements/compounds having coefficients of 1.
4.) ------------------------------------------------------------------------------------------------------
The unbalanced equation:
Ba + Br₂ -----> BaBr
Reactants: 1 barium, 2 bromine
Products: 1 barium, 1 bromine
The balanced equation:
2 Ba + Br₂ -----> 2 BaBr
Reactants: 2 barium, 2 bromine
Products: 2 barium, 2 bromine
5.) ------------------------------------------------------------------------------------------------------
The unbalanced equation:
Ca + N₂ ------> CaN
Reactants: 1 calcium, 2 nitrogen
Products: 1 calcium, 1 nitrogen
The balanced equation:
2 Ca + N₂ ------> 2 CaN
Reactants: 2 calcium, 2 nitrogen
Products: 2 calcium, 2 nitrogen
Amines suitable for preparing buffers are often synthesized by treating ammonia with epoxides. Consider the following series of reactions, and draw the structure of compound B.
It is correct to state that Amines are suitable for preparing buffers are often synthesized by treating ammonia with epoxides. The relative structures of compound B are attached accordingly.
What is an Amine?Amine is a family of basic chemical compounds formed by replacing hydrogen with one or more monovalent hydrocarbon radicals.
Apart from medications and pharmaceuticals, amines are employed in the production of azo-dyes and nylon.
They are commonly employed in the development of crop protection, pharmaceutical, and water purification chemicals. They are also used in personal care products.
Ethanol amines are the most widely utilized form of amine on the global market.
It should be noted that ammonia attacks epoxides at the least substituted carbon to produce (A.)
The generated product is then made to react with another epoxide, resulting in the synthesis of successive products.
Learn more about Amines at;
https://brainly.com/question/17278249
#SPJ1
What is the total pressure of a mixture of he and h2 if the partial pressures are 320 mm hg and 800 mm hg respectively
Answer:
1120 mm Hg
plus give brainliest
Radiometric dating allows scientists to figure out the absolute age of an event.
A. What is a half-life?
B. Which of these four radioactive elements would you choose to date a specimen from the most recent epoch?
Half-life in geology is defined as the time it takes for a radioactive material or element to decay half its original quantity into a daughter radiogenic isotope.
From the radioactive elements listed the Carbon-14 would be most preferable for dating a specimen.
What is radiometric dating?Radiometric dating is defined as the process that is used by scientists to calculate the age of geologic materials.
From the data given in the table above, the radioactive element with the most recent half-life is carbon-14 being 5,730 years.
The uses os Carbon-14 include the following:
Used to measure the age of wood,Used to measure sources of chloride and the age of waterResearchers can use that decay as a kind of clock that allows them to peer into the past.Used in studying abnormalities of metabolism that underlie diabetes, gout, anemia, and acromegaly.The carbon-14 is preferably used for dating specimen because it is the most stable and accurately dates archaeological artifacts.
Learn more about radiation here:
https://brainly.com/question/324455
#SPJ1
The statement, in a mixture of gases, the total pressure is the sum of the individual partial pressures of gases in the mixture paraphrases ________.
Dalton's law
States that the total pressure exerted by a mixture of gases is the sum of the pressures exerted independently by each gas in the mixture.
What is Dalton's law of partial pressure ?Dalton's law, which states that a gas mixture's overall pressure is equal to the sum of its component gases' partial pressures. The pressure that each gas would produce if it occupied the same volume of the mixture by itself at the same temperature is known as the partial pressure.
The pressure that each gas would produce if it occupied the same volume of the mixture at the same temperature alone is referred to as the partial pressure.Learn more about Dalton's law of partial pressure here:
https://brainly.com/question/14119417
#SPJ4
Suppose 110.0 mL110.0 mL of hydrogen gas at STP combines with a stoichiometric amount of fluorine gas and the resulting hydrogen fluoride dissolves in water to form 150.0 mL150.0 mL of an aqueous solution. What is the concentration of the resulting hydrofluoric acid
Suppose 110.0 mL of hydrogen gas at STP combines with a stoichiometric amount of fluorine gas and the resulting hydrogen fluoride dissolves in water to form 150.0 mL of an aqueous solution. 0.032 M is the concentration of the resulting hydrofluoric acid.
What is Balanced Chemical Equation ?The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.
Now write the balanced chemical equation
H₂ + F₂ → 2HF
What is Ideal Gas ?An ideal gas is a gas that obey gas laws at all temperature and pressure conditions. It have velocity and mass but do not have volume. Ideal gas is also called perfect gas. Ideal gas is a hypothetical gas.
It is expressed as:
PV = nRT
where,
P = Pressure
V = Volume
n = number of moles
R = Ideal gas constant
T = temperature
Here,
P = 1 atm [At STP]
V = 110 ml = 0.11 L
T = 273 K [At STP]
R = 0.0821 [Ideal gas constant]
Now put the values in above expression
PV = nRT
1 atm × 0.11 L = n × 0.0821 L.atm/ K. mol × 273 K
[tex]n = \frac{1\ \text{atm} \times 0.11\ L}{0.0821\ \text{L. atm/ K. mol} \times 273\ K}[/tex]
n = 0.0049 mol
How to find the concentration of resulting solution ?To calculate the concentration of resulting solution use the expression
[tex]C = \frac{n}{V}[/tex]
[tex]= \frac{0.0049}{0.15}[/tex]
= 0.032 M
Thus from the above conclusion we can say that Suppose 110.0 mL of hydrogen gas at STP combines with a stoichiometric amount of fluorine gas and the resulting hydrogen fluoride dissolves in water to form 150.0 mL of an aqueous solution. 0.032 M is the concentration of the resulting hydrofluoric acid.
Learn more about the Ideal Gas here: https://brainly.com/question/25290815
#SPJ4
A physical change involves a change in the identity o the sample.
O True
O False
What type of cleaning agent should be used to clean a laminar flow hood?
a. 70% Isopropyl Alcohol.
b. 90% Ethyl Propyl alcohol.
c. 90% Isopropyl Alcohol.
d. 50% Ethyl Propyl alcohol.
The type of cleaning agent that should be used to clean a laminar flow hood is 70% Isopropyl Alcohol.
Isopropyl alcohol is mixed with water for use as a rubbing-alcohol antiseptic. It is also utilized in aftershave creams, hand lotions, and other cosmetics. In enterprise, it is used as a less expensive solvent for cosmetics, drugs, shellacs, and gums, in addition to denaturing ethanol (ethyl alcohol).
Isopropyl alcohol is a colorless, flammable chemical compound with a robust alcoholic smell. As an isopropyl institution related to a hydroxyl group, it's far the handiest example of a secondary alcohol, wherein the alcohol carbon atom is connected to 2 other carbon atoms.
Isopropyl alcohol is pure alcohol and is a colorless liquid with a musty, sharp odor. There are no other components in a bottle of isopropyl alcohol. through assessment, rubbing alcohol consists of isopropyl alcohol among different components, including water. maximum rubbing alcohol manufacturers incorporate 70% isopropyl alcohol.
Learn more about isopropyl alcohol here https://brainly.com/question/5425836
#SPJ4
Consider a 175.7 g sample of the compound manganese(IV) perchlorate.
Using the formula Mn(ClO₄)₄ (MM = 452.74), What quantity in moles of oxygen are in 175.7 g of manganese perchlorate?
Answer:
6.21 moles O
Explanation:
To find the moles of oxygen, you need to (1) convert grams Mn(ClO₄)₄ to moles Mn(ClO₄)₄ (via molar mass) and then (2) convert moles Mn(ClO₄)₄ to moles O (via mole-to-mole ratio from formula subscripts). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units.
Molar Mass (Mn(ClO₄)₄): 452.74 g/mol
1 Mn(ClO₄)₄ = 1 Mn and 4 Cl and 16 O
175.7 g Mn(ClO₄)₄ 1 mole 16 moles O
--------------------------- x ------------------- x --------------------------- = 6.21 moles O
452.74 g 1 mole Mn(ClO₄)₄
A solution contains 7.8% W/V ethanol. Express this in units of g/mL.
A solution that contains 7.8% W/V ethanol is equivalent to 0.078g/mL. Details about weights per volume can be found below.
How to convert W/V% to g/mL?Weights per volume is a unit for measuring density of a substance. It can be converted to g/mL using the following expression:
w/v% = g/100mL
According to this question, a solution contains 7.8% W/V ethanol. The equivalent of this in g/mL is as follows:
7.8% W/V = 7.8g/100mL
= 0.078g/mL
Therefore, a solution that contains 7.8% W/V ethanol is equivalent to 0.078g/mL.
Learn more about weights per volume at: https://brainly.com/question/2416510
#SPJ1
You picked up a dirty test tube with a sticky substance on the outside. You get some of this substance on your hand. What is the first thing you should do
You picked up a dirty test tube with a sticky substance on the outside. You get some of this substance on your hand. The first thing that I should do is wash my hand and then tell the teacher.
Define the test tube.A test tube often referred to as a culture tube or sample tube, is a typical item of lab glassware that is made up of a finger-like length of clear plastic or glass tubing that is open at the top and closed at the bottom. Usually, test tubes are stored on dedicated racks.
Learn more about Test Tube here:-
https://brainly.com/question/26703433
#SPJ4
When a hydrogen atom is part of a molecular structure, it is always a ___________ atom.
Answer:
terminal
Explanation:
When a hydrogen atom is part of a molecular structure, it is always a terminal atom.
A substance crystallizes with one atom at each corner, one atom on 8 of the edges, and one atom on 6 of the faces. How many atoms are present in one unit cell
The number of atoms in one unit cell with one atom at each corner, one atom on 8 of the edges, and one atom on 6 of the faces are 4.6atoms.
There is one atom at each corner and there are 8 corners in a unit cell, so there is one atom in each of the eight corners.
Therefore, the number of atom from corners = 1 x 1/8 = 1atom
There are 12 edges, since there are one atom on 8 of the edges the number of atom = 1 x 8/12 = 0.6atom
There is one atom at each face and there are 6 faces in a unit cell, each atom shares two face.
Therefore, the number of atoms on face = 2 x 1/6 = 3
Total number of atoms in one unit cell = 1 + 0.6 + 3 = 4.6atoms
Learn more about unit cell
https://brainly.com/question/13433017
#SPJ4
A compound has a percent composition of 81.71% C and 18.29% H. What is the empirical formula of this compound?
Considering the definition of empirical formula, the empirical formula is C₃H₈.
Definition of empirical formulaThe empirical formula is the simplest expression to represent a chemical compound, which indicates the elements that are present and the minimum proportion in whole numbers that exist between its atoms, that is, the subscripts of chemical formulas are reduced to the most integers. small as possible.
Empirical formula in this caseIn this case, in first place you know the percent composition:
C: 81.71 %H: 18.29%Assuming a 100 grams sample, the percentages match the grams in the sample. So you have 81.71 grams of carbon and 18.29 grams of hydrogen H.
Then it is possible to calculate the number of moles of each atom in the molecule, taking into account the corresponding molar mass:
C: [tex]\frac{81.71 grams}{12\frac{grams}{mole} }[/tex]= 6.81 molesH:[tex]\frac{18.29 grams}{1\frac{grams}{mole} }[/tex]= 18.29 molesThe empirical formula must be expressed using whole number relationships, for this the numbers of moles are divided by the smallest result of those obtained. In this case:
C: [tex]\frac{6.81 moles}{6.81 moles}[/tex]= 1H:[tex]\frac{18.29 moles}{6.81 moles}[/tex]= 2.68 ≅ [tex]\frac{8}{3}[/tex]To express this relationship in the form of simple integers, it is necessary to multiply by a simple number to achieve this:
C: 1×3 =3 H:≅ [tex]\frac{8}{3}[/tex]×3= 8Therefore the C: H mole ratio is 3: 8
Finally, the empirical formula is C₃H₈.
Learn more about empirical formula:
brainly.com/question/21081934
brainly.com/question/5115389
brainly.com/question/4594902
brainly.com/question/13725914
brainly.com/question/13599051
brainly.com/question/13112542
#SPJ1
Use the following, balanced equation for the question below:
2Al(s) + 3CuCl₂(aq) → 3Cu(s) + 2AlCl3(aq)
How many moles of aluminum are needed to produce 50.0 grams of aluminum chloride?
Answer:
0.375 moles Al
Explanation:
To find the moles Al, you need to (1) convert grams AlCl₃ to moles AlCl₃ (via molar mass) and then (2) convert moles AlCl₃ to moles Al (via mole-to-mole ratio from equation coefficients). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the sig figs of the given value (50.0 g).
Molar Mass (AlCl₃): 26.982 g/mol + 3(35.453 g/mol)
Molar Mass (AlCl₃): 133.341 g/mol
2 Al(s) + 3 CuCl₂(aq) -----> 3 Cu(s) + 2 AlCl₃(aq)
50.0 g AlCl₃ 1 mole 2 moles Al
-------------------- x ------------------ x ----------------------- = 0.375 moles Al
133.341 g 2 moles AlCl₃
point
Which is the correct balanced equation for copper(II) sulfate + aluminium -->
aluminium sulfate + solid copper?
Answer: 2Al(s) + 3CuSO4(aq) → Al2(SO4)3(aq) + 3Cu(s)
Explanation: The quantities of aluminum and copper sulfate used as reactants will be such that the copper sulfate will be in excess. Thus, the aluminum will be the limiting factor in determining the number of moles (gram-atoms) of products that will be formed.
when in extinguishing agent is determined to be safe and effective for you from combustible Metals it will
Dry powder extinguishers
They are for Class D or combustible metal fires, only. They are ineffective on all other classes of fires.
What is an Extinguishing agent ?Extinguishing Agent means a source of extinguishment in which to quickly and effectively suppress the fire.
They consist of ABC Dry Chemical, BC Dry Chemical, Dry Powder, Water, Foam, Wet Chemical, Halogenated, and Carbon Dioxide. Dry Chemical extinguishers: Dry chemical extinguishers are the most common and available in few types.Learn more about Extinguishing agent here:
https://brainly.com/question/14598122
#SPJ4
Explain why all the elements of period 3 is placed on the periodic table in period 3
Answer:
3 Electron shell/orbit
Explanation:
the number of shell an element has is what determines the period of that element.
This table resembles a condensed version of the modern periodic table. Using the full periodic table as a reference, type the symbols for the elements from part A into this table based on their appropriate group and period.
re write the question.
Explanation:
it seems incomplete.
At a particular temperature, the solubility of Kr in water is 0.060 M when the partial pressure is 0.90 atm. What partial pressure (in atm) of Kr would give a solubility of 0.150 M
At a particular temperature, the solubility of He in water is 0.060 M when the partial pressure is 0.90 atm. 2.27 atm is the partial pressure of Kr would give a solubility of 0.150 M.
What is Henry's Law ?According to Henry's law, the weight of a gas dissolved by a liquid is proportional to the pressure of the gas onto the liquid.With very few exceptions, a solute molecule in an extremely diluted solution will only have solvent molecules as its close neighbors. This means that the likelihood that a specific solute molecule will escape into the gas phase is predicted to be independent of the total concentration of solute molecules.Solution:
The solubility of gas is directly proportional to partial pressure. It is expressed as:
S = [tex]K_ h \times P _g_a_s[/tex]
where, S = Solubility of gas
[tex]K_h[/tex] = Henry's Law constant
[tex]P_g_a_s[/tex] = Partial pressure of gas
Now, put the values in above expression we get
0.060M = [tex]K_h[/tex] × 0.9 atm
[tex]K_h[/tex] = = 0.066 M/atm
Now we have to find the partial pressure of He
0.150 M = 0.066 M/atm × [tex]P_g_a_s[/tex]
[tex]P_g_a_s[/tex] = 2.27 atm
Learn more about the Henry's Law : brainly.com/question/23204201
#SPJ4
State whether it would be worthwhile to investigate finding a catalyst to use in this reaction under standard conditions and explain why?.
Yes, it will be worthwhile to investigate finding a catalyst to use in this reaction under standard conditions because it is negative.
What is a Catalyst?This is a substance which speeds up the rate of a chemical reaction by lowering the activation energy.
ΔG being negative indicates a a slow reaction which is why a catalyst under standard conditions should be used.
Read more about Catalyst here https://brainly.com/question/12507566
#SPJ1
What is the concentration, in ppb, of
PCB's in a chemical spill, if there
are 6.0 x 10-5 g in 4,600 kg of soil?
Answer:
1ppm = 1 mg/kg
60460 = 0.13
0.13
Explanation:
Answer:0.013 ppb
Explanation:
is glycine mono functional?
Answer:
Yes
Explanation:
Answer:it act as a precursor to proteins
Explanation:
Is copper and silver nitrate a physical change or Chemical change
Explanation:
One of the most fascinating chemical experiments is the reaction between silver nitrate and copper wire in water. Characterised by fractal-like precipitates, this experiment is a stunning example of a simple redox reaction.
Copper reacting with silver nitrate is a chemical change. In a chemical change, new substances are formed with different chemical properties.
Copper (Cu) is a metal, and silver nitrate is a compound made of silver (Ag), nitrogen (N), and oxygen (O).When copper is added to silver nitrate, a reaction occurs. The copper atoms react with the silver nitrate molecules, resulting in the formation of new substances.
The reaction produces copper nitrate and silver (Ag) as products.Copper nitrate is a compound formed by the combination of copper, nitrogen, and oxygen, while silver remains unchanged.
The color of the solution changes, indicating a chemical reaction has taken place. Copper nitrate is usually a blue-green color, while silver is a metallic silver color.The chemical properties of the substances involved in the reaction are altered. Copper, being a metal, is malleable and conducts electricity, whereas copper nitrate is a compound and does not possess these properties.
Thus, the reaction between copper and silver nitrate is a chemical change because new substances with different properties are formed.
Learn more about chemical change,here:
https://brainly.com/question/23693316
#SPJ7
What is the name of the molecule below?
G
O A. Ethyne
O B. Ethene
C. Methene
OD. Methyne
H-C=C-H
The name of the molecule above is Ethene
What are organic compounds?Organic compounds can be defined as compounds containing carbon and hydrogen.
Some classes of organic compounds are:
AlkanesAlkenesAlkanolsAlkanalsAlkynesSo therefore, he name of the molecule above is Ethene
Learn more about organic compounds:
https://brainly.com/question/704297
#SPJ1
Calculate the number of molecules in 3 mol of carbon dioxide (CO2).
18.06 ₓ [tex]10^{23}[/tex] molecules in 3 mol of carbon dioxide (CO2).
What is Avogadro's number?The proportionality factor that connects the quantity of substance in a sample to the number of constituent particles in that sample is called the Avogadro constant. The reciprocal mole, which is its SI unit, is specified precisely as NA 6.02214076 × [tex]10^{23}[/tex] [tex]mol^{-1}[/tex]. It bears Amedeo Avogadro's name, an Italian scientist.
When dealing with very big quantities, chemistry uses Avogadro's number. It serves as the foundation for the mole, a unit of measurement that makes converting between moles, mass, and the number of molecules simple. The quantity, for instance, can be used to determine how many water molecules make up a single snowflake.
1 Mole is 6.02ₓ [tex]10^{23}[/tex] molecules.
Therefore 3 Moles of Carbon Dioxide ([tex]CO_{2}[/tex]) =3(6.02ₓ [tex]10^{23}[/tex])
3 Moles of Carbon Dioxide ([tex]CO_{2}[/tex]) =18.06 ₓ [tex]10^{23}[/tex]molecules of [tex]CO_{2}[/tex].
To know more about Avogadro constant refer to: https://brainly.com/question/14637684
#SPJ1
The half-life of cesium-137 is 30 years. Suppose we have a 150 mg sample. (a) Find the mass (in mg) that remains after t years.
The half-life of cesium-137 is 30 years. Suppose we have a 150 mg sample. The masses (in mg) that remains after t years A=150/2^t/30yrs
what do you mean by half-life?A substance's half-life is the amount of time it takes for half of it to decompose.
What is a half-life example?Half-life is the length of time it takes for half of an unstable nucleus to go through its decay process. A radioactive element's half-life decay time varies depending on the element. For instance, carbon-10 has a half-life of only 19 seconds, making it impossible to discover in nature. On the other hand, uranium-233 has a half-life of almost 160000 years.
When n half-lives have passed, the formula for estimating the amount still left is:-
A=A°/2^n
where,
A=initial amount
A°=remaining amount
n=t/t_{1/2}
A=150/2^t/30yrs
Learn more about half-life here:-
https://brainly.com/question/28001741
#SPJ1